罗丹明B分子印迹固相萃取小柱的研制及应用

研制一种对罗丹明B具有特异性识别性能的分子印迹固相萃取小柱。用沉淀聚合法制备罗丹明B分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其性能,并对市售辣椒样品中的罗丹明B进行测量。罗丹明B模板聚合物的吸附能力明显优于空白聚合物;印迹固相萃取小柱对罗丹明B标准溶液(0.05 mmol/L)一次性萃取率为98.24%,实际样品测量的回收率为90.0%~95.0%,测定结果的相对标准偏差为0.9%~1.7%(n=3)。罗丹明B分子印迹固相萃取小柱选择性好、萃取率高,可应用于食品、化妆品检测等相关领域。     

分子印迹固相萃取技术检测江水、尿液及牛奶中雌激素残留

以β-雌二醇和炔雌醇的分子印迹聚合物为填料制备固相萃取小柱,选择60%(V/V)甲醇-水溶液作为雌激素的淋洗液,甲醇-乙酸(9:1,V/V)为洗脱液,洗脱两次可彻底洗脱固相萃取小柱中目标分子.以建立的萃取条件对上海黄浦江水、尿液、牛奶中雌激素进行富集,结合高效液相色谱法,建立了基于分子印迹固相萃取技术检测上述实际样品中...     

尼泊金乙酯分子印迹固相萃取小柱的研制及应用

研制了一种对尼泊金乙酯具有特异性识别性能的分子印迹固相萃取小柱。用本体聚合法制备尼泊金乙酯分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其固相萃取性能,并结合UV法对滴眼液中的尼泊金乙酯进行测定。结果显示,尼泊金乙酯模板聚合物的吸附能力强于空白聚合物;印迹固相萃取柱对尼泊金乙酯标准溶液(0.04mmol/L)一...     

染料木素分子印迹聚合物的制备及其识别性能

以染料木素为模板分子、4-乙烯基吡啶(4-VP)为功能单体、乙二醇二甲基双丙烯酸酯(EGDMA)为交联剂、四氢呋喃(THF)为溶剂,采用本体聚合法制备了染料木素的分子印迹聚合物;采用静态平衡结合实验研究了该分子印迹聚合物对染料木素的结合能力和选择性能.结果表明,与化学组成相同的相应非印迹聚合物相比,染料木素分子印迹聚合物对染料木素的吸附性能和选择性更好.利用所合成的分子印迹聚合物作为固相萃取材料填充固相萃取小柱,可以选择性地从豆奶粉中分离、富集染料木素;此外,该分子印迹聚合物还有望用于其他豆制品的分析检验.     

基质固相分散法与固相萃取法在检测水产品中己烯雌酚残留中的应用

分别建立了基质固相分散（MSPD）法、固相萃取（SPE）法与气相色谱/质谱联用（GC-MS）测定水产品中己烯雌酚（DES）残留量的分析方法,并对MSPD与SPE 2种样品前处理方法的效果进行了比较。MSPD法中样品以弗罗里硅土（Florisil）作为固相分散剂,经乙酸乙酯提取,再用Florisil净化;SPE法中样品经乙酸乙酯超声提取,过Florisil小柱进行净化,最后经GC-MS在选择离子监测模式下测定水产品中DES。在优化的色谱条件下,方法的线性范围为1-300 μg/L,相关系数为0.9985。M     

三聚氰胺分子印迹聚合物的制备及奶制品中三聚氰胺的分离

采用分子印迹技术,以三聚氰胺为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了对三聚氰胺具有较好选择性的分子印迹聚合物.通过静态平衡结合实验研究了该聚合物的结合能力和选择性能,与化学组成相同的相应非印迹聚合物相比,三聚氰胺的分子印迹聚合物对三聚氰胺有较高的吸附性能和选择性.以该分子印迹聚合物为固相萃取材料填充固相萃取小柱,可以从奶粉、纯牛奶等奶制品中选择性地分离、富集三聚氰胺,并有效地去除奶制品中的复杂基质,取得了良好的效果.对奶粉和液态奶提取液的加标回收率分别为91% ～103%、93% ～98%,相对标准偏差(n=3)分别为7.9%和1.1%.该分子印迹聚合物还有望用于其它奶制品的分析.     

印迹分子聚合物结合低共熔溶剂用于山楂中咖啡酸的固相萃取

在相同的实验条件下,分别合成了以咖啡酸为模板的印迹分子聚合物和无模板分子聚合物。使用场发射扫描电镜法和吸附实验表征这两种聚合物材料的孔状结构和选择性吸附性能。然后利用印迹分子聚合物、无模板分子聚合物、C₁₈萃取小柱这3种材料结合固相萃取法纯化山楂提取物中的咖啡酸,提取率分别为3.46、1.01、1.17 μg/g。为了优化固相萃取过程,实验研究了不同洗脱剂的影响。分别利用用氯化胆碱和甘油、氯化胆碱和尿素(摩尔比均为1:2)合成出两种低共熔溶剂。甲醇与这两种低共熔溶剂分别以不同的体积比混合作为洗脱剂,用于优化咖啡酸的固相萃取过程。实验结果表明,印迹分子聚合物是一种良好的固相萃取材料;当甲醇和甘油基低共熔溶剂在体积比为3:1混合时,表现出最好的洗脱能力,得到咖啡酸的回收率为82.32%。     

固相微萃取高效液相色谱法测定食品中己烯雌酚

建立了固相微萃取(SPME)-高效液相色谱(HPLC)联用测定食品中己烯雌酚(DES)的方法.考察了萃取纤维头、萃取时间、解吸时间和盐的添加对萃取效果的影响.在此基础上,采用正交试验,以解析液组成、萃取液pH和搅拌速度为3因素筛选出了最佳固相微萃取条件.该分析方法的线性范围为0.02 ～2.0μg/ml,工作曲线线性良...     

印迹分子聚合物结合低共熔溶剂用于山楂中咖啡酸的固相萃取（英文）

在相同的实验条件下,分别合成了以咖啡酸为模板的印迹分子聚合物和无模板分子聚合物。使用场发射扫描电镜法和吸附实验表征这两种聚合物材料的孔状结构和选择性吸附性能。然后利用印迹分子聚合物、无模板分子聚合物、C18萃取小柱这3种材料结合固相萃取法纯化山楂提取物中的咖啡酸,提取率分别为3.46、1.01、1.17μg/g。为了优化固相萃取过程,实验研究了不同洗脱剂的影响。分别利用用氯化胆碱和甘油、氯化胆碱和尿素(摩尔比均为1∶2)合成出两种低共熔溶剂。甲醇与这两种低共熔溶剂分别以不同的体积比混合作为洗脱剂,用于优化咖啡酸的固相萃取过程。实验结果表明,印迹分子聚合物是一种良好的固相萃取材料;当甲醇和甘油基低共熔溶剂在体积比为3∶1混合时,表现出最好的洗脱能力,得到咖啡酸的回收率为82.32%。     

加替沙星分子印迹聚合物的制备及其应用

以加替沙星为模板分子,采用溶胶-凝胶分子印迹技术,合成具有分子识别作用的新型有机-无机杂化分子印迹聚合物,对其进行吸附性能研究证明了印迹聚合物对加替沙星的专一吸附性能。以该印迹聚合物为固相萃取材料填充固相萃取柱,优化固相萃取条件,结合超高效液相色谱法,对牛奶样品进行检测。建立了分子印迹固相萃取方法,分离富集并检测牛奶中的加替沙星,其回收率为79.87%,富集倍数为38,高于市售C18柱,具有一定的实际应用价值。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.