General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

Synthesis of diethyl 2-(aryl)vinylphosphonates by the Heck reaction catalysed by well-defined palladium complexes

Pd-catalysed procedures for the direct Heck arylation of diethyl vinylphosphonate with various aryl or heteroaryl halides toward the synthesis of diethyl 2-(aryl)vinylphosphonates are reported. Several homogeneous catalytic systems (i.e. Herrmann palladacycle, Nolan (NHC)-palladium catalyst, Pd(OAc)₂/PPh₃) were used and compared within the study. High conversions and selectivities were achieved under optimised conditions (2 mol% [Pd], NMP, K₂CO₃, 140 °C) whatever the homogeneous catalyst used.     

Potential N‐Heterocyclic Carbene Precursors in the Palladium‐Catalyzed Heck Reaction

A novel 1‐(cyclobutylmethyl)‐substi‐tuted imidazolidinium/benzimidazolium salts as N‐heterocyclic carbene (NHC) precursors were successfully synthesized and characterized by ¹H NMR, ¹³C NMR, IR, and elemental analysis techniques. These compounds were easily prepared from the reaction of N‐alkyl imidazoline/N‐alkyl benzimidazole with bromomethylcyclobutane in high yields. The in situ formed catalytic system derived from the NHC precursor and Pd(OAc)₂ was used in the Heck reaction between aryl halides and styrene with potassium hydroxide in water. The corresponding Heck products were obtained in good yields. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 24:77–83, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21065     

Polycondensation of haloarylketones catalyzed by palladium compounds bearing N-heterocyclic carbene (NHC) ligands

Palladium-catalyzed α-arylation of ketones, which can efficiently give coupling products by using appropriate ligands and bases, could be applied to a polycondensation reaction. Stable N-heterocyclic carbenes (NHC) were used as favorable ligands coordinating the Pd catalysts, which were generated in situ from commercially available palladium compounds such as Pd(OAc)₂ and Pd₂(dba)₃ as suitable catalyst precursors in this polymerization. Using small amounts of binary catalysts, poly(aryl alkyl ketone)s were afforded in high yields from haloarylketones in the presence of a base. A primarily prepared palladium catalyst having an NHC ligand, [Pd(OAc)₂(NHC)], also efficiently catalyzed the polycondensation, whereas a palladium compound bearing two carbene ligands, [PdX₂(NHC)₂], did not.     

Palladium-catalysed symmetrical and unsymmetrical coupling of aryl halides

Pd(OAc)₂ is a convenient catalyst under basic conditions for the synthesis of symmetrical biaryl moieties from aryl halides. This homocoupling of aryl halides is a good catalytic alternative to classical biaryl formations involving stoichiometric amounts of metal. This method is compatible with sensitive functional groups. We also studied the extension of this reaction to unsymmetrical aryl coupling.     

Palladium catalyzed Suzuki-Miyaura coupling with aryl chlorides using a bulky phenanthryl N-heterocyclic carbene ligand

A novel bis-phenanthryl N-heterocyclic carbene (NHC) based palladium acetate catalyst was effective for the coupling of various aryl and vinyl chlorides with organoboron compounds. N,N-Bis-(2,9-dicyclohexyl-10-phenanthryl)-4,5-dihydroimidazolium chloride 8 (H₂ICP·HCl) with Pd(OAc)₂ and KF·18-c-6 in THF at room temperature gave Suzuki-Miyaura coupling of aryl and vinyl chorides, including unactivated and di-ortho substituted substrates in high yields. Hindered tri- and tetra-ortho substituted products were also efficiently produced. Benzyl chloride was also found to be a useful coupling partner and trimethylboroxine was used to give methylated products. The effect of ligand, base, temperature, solvent, and reaction time are reported along with various substrates including halides and triflates.     

Activation of reducing agents. Sodium hydride containing complex reducing agents 25. A one pot one reagent cross-coupling reaction of aryl halides

The preparation of NiCRA [NaH-AtmONa-Ni(OAc)₂] in the presence of 2,2′-bipyridyl and KI leads to a reagent (termed NiCRA-bpy-KI) which is shown to be one of the most efficient Ni containing reagents reported so far for the cross-coupling of aryl halides.     

Synthesis of aryl substituted quinones as β-secretase inhibitors: Ligand-free direct arylation of quinones with aryl halides

The simple ligand-free direct arylation of quinones with aryl halides applying Pd(OAc)₂ as a catalyst in accordance with Heck reaction was studied. This reaction provided a simple and efficient synthetic approach to efficient inhibitors of β-secretase aryl-substituted quinones.     

Recyclable N-heterocyclic carbene/palladium catalyst on graphene oxide for the aqueous-phase Suzuki reaction

Graphene oxide (GO) was functionalized with a N-heterocyclic carbene (NHC) precursor, 3-(3-aminopropyl)-1-methylimidazolium bromide ([APMIm][Br]) for the immobilization of palladium catalyst. The GO-supported NHC precursor (IMGO) formed a stable complex with Pd(OAc)₂ (GO–NHC–Pd), which showed excellent catalytic activity and fast reaction kinetics in the aqueous-phase Suzuki reaction of aryl bromides and chlorides at relatively mild conditions (1 h at 50 °C). The GO–NHC–Pd catalyst was reused several times without any loss of its catalytic activity in the Suzuki reaction of aryl bromide.     

Sodium 2-(2-pyridin-3-ylethylamino)sulfonate: an efficient ligand and base for palladium-catalyzed Heck reaction in aqueous media

The first successful Pd(OAc)₂, N-donor ligand and base mediated Heck coupling reaction of aryl halides and alkenes in water is described. The corresponding Heck products were obtained in good to excellent yields.     

Investigation of the scope and mechanism of copper catalyzed regioselective methylthiolation of aryl halides

Methylthiolation of structurally diverse aryl halides was accomplished under fluoride free conditions using catalytic amounts of CuI, and DMSO as the methylthiolation source. Optimization studies unveiled several varieties of promoters among which Zn(OAc)₂ was found ideal. The analogous reaction with DMSO-d₆ afforded corresponding deuterated aryl methyl thioether with 99% purity. Mechanistic studies revealed CuSMe as the active methylthiolation agent.     

经由Domino脱HCl/Pd（OAc）2催化的Heck反应合成查尔酮

通过Domino脱HCl/Pd(OAc)2催化的Heck反应实现了β-氯代烷基芳基酮、酯和酰胺与卤代芳烃的交叉偶联反应,高效合成了查尔酮类化合物。利用原位生成烯酮为中间体进行反应的策略,减少副反应的发生,从而提高反应的效率。该方法对各种官能团的容忍性好,为从氯代烷烃出发直接合成查尔酮类化合物提供了一条新途径。     

Simultaneous reduction of nitro- to amino-group in the palladium-catalyzed Suzuki cross-coupling reaction

An efficient method for palladium-catalyzed Suzuki cross-coupling reaction with simultaneous reduction of nitro- to amino-group has been developed. This method allows nitro-substituted aryl halides to readily react with arylboronic acids, to afford aryl substituted aniline in low to excellent yields. The reaction was catalyzed by Pd(OAc)₂ (3 mol %) at 150 °C under atmospheric pressure in the presence of K₂CO₃ (3 equiv) in DMF/H₂O (5/1).     

PEG-400 promoted Pd(OAc)2/DABCO-catalyzed cross-coupling reactions in aqueous media

PEG-400 [poly(ethylene glycol-400)] was found to improve the Pd(OAc)₂/DABCO-catalyzed aqueous Suzuki-Miyaura and Stille cross-coupling reactions. In the presence of Pd(OAc)₂, DABCO, and PEG-400, a variety of aryl halides were coupled with arylboronic acids or organotin compounds efficiently to afford the corresponding cross-coupled products in moderate to excellent yields. The turnover numbers was up to 900,000 for the Suzuki-Miyaura reaction and up to 9800 for the Stille reaction. The catalyst system was also effective for Heck and Sonogashira cross-coupling reactions to some extent.     

Palladium(II)‐N‐heterocyclic carbene complexes: synthesis,characterization and catalytic application

N‐Heterocyclic carbenes (NHCs) are of great importance and are powerful ligands for transition metals. A new series of sterically hindered benzimidazole‐based NHC ligands (LHX) ( 2a , 2b , 2c , 2d , 2e , 2f ), silver–NHC complexes ( 3a , 3b , 3c , 3d , 3e , 3f ) and palladium–NHC complexes ( 4a , 4b , 4c , 4d , 4e , 4f ) have been synthesized and characterized using appropriate spectroscopic techniques. Studies have focused on the development of a more efficient catalytic system for the Suzuki coupling reaction of aryl chlorides. Catalytic performance of Pd–NHC complexes and in situ prepared Pd(OAc)₂/LHX catalysts has been investigated for the Suzuki cross‐coupling reaction under mild reaction conditions in aqueous N,N‐dimethylformamide (DMF). These complexes smoothly catalyzed the Suzuki–Miyaura reactions of electron‐rich and electron‐poor aryl chlorides. Copyright © 2014 John Wiley & Sons, Ltd.     

Palladium-catalyzed Suzuki–Miyaura cross-coupling reaction of potassium 2-pyridyl trifluoroborate with aryl (heteroaryl) halides

Palladium-catalyzed Suzuki–Miyaura cross-coupling reaction of potassium pyridine-2-trifluoroborates and various aryl (heteroaryl) halides can generate the corresponding desired coupling products with moderate to good yields. It can be carried out under the conditions with ethanol as solvent, Pd(OAc)₂ and SPhos as catalyst system and Na₂CO₃ as a base.     

Palladium‐Catalyzed Suzuki‐Miyaura Type Coupling Reaction of Aryl Halides with Triphenylborane‐Pyridine

The Suzuki‐Miyaura type coupling reaction of aryl halides with triphenylborane‐pyridine was described. The reaction can be catalyzed by Pd(OAc)₂ (5 mol%) in presence of Cs₂CO₃ at 50°C or 80°C, and functionalized biaryls were obtained in good to excellent yields. This protocol is general and can tolerate a wide range of functional groups.     

A simple catalyst system for the palladium-catalyzed coupling of aryl halides with terminal alkynes

A convenient catalyst system consisting of Pd(OAc)₂, PPh₃, K₃PO₄ and DMSO was found to be effective for the coupling reaction of aryl halides with terminal alkynes as well as the deacetonative coupling reaction using a 4-aryl-2-methylbut-3-yn-2-ol as a terminal alkyne precursor. An iminophosphine as a ligand worked more effectively for some combination of substrates than triphenylphosphine.     

Ferrocenyl bisoxazoline as an efficient non‐phosphorus ligand for palladium‐catalyzed copper‐free Sonogashira reaction in aqueous solution

Pd(OAc)₂‐catalyzed Sonogashira coupling reactions of alkynes and a variety of aryl halides with 1,3‐bis(5‐ferrocenylisoxazoline‐3‐yl)benzene as an efficient non‐phosphorus ligand under copper‐free conditions are presented. The main advantages over previous methodologies include low catalyst loading (0.2 mol% Pd(OAc)₂ and 0.4 mol% ferrocenyl bisoxazoline ligand are sufficient for these coupling reactions), less problematic reaction medium (water–dimethylformamide) and more convenient operation (no requirement for nitrogen protection).     

Nickel-catalyzed synthesis of phosphonium salts

The nickel-catalyzed synthesis of phosphonium salts from aryl halides and triphenylphosphine is reported.The formation of phosphonium salts occurs by the oxidative addition reaction of Ni[P(C₆H₅)₃]₃ on the aryl halides and reaction of the coordinated aryl groups with triphenylphosphine.The influence of substituents on the aromatic nucleus is studied.