Comparison of different capillary isoelectric focusing methods--use of "narrow pH cuts" of carrier ampholytes as original tools to improve resolution

Two capillary isoelectric focusing (CIEF) systems have first been optimized: one uses a bare silica capillary and 30% (v/v) of glycerol in the separation medium while the other uses a coated capillary and an aqueous background electrolyte. To perform permanent capillary coating, two neutral polymers have been compared: hydroxypropylcellulose (HPC) and polyvinylalcohol (PVA). HPC coating gave best results for electroosmotic flow (EOF) limitation on a wide pH range: as compared to a bare silica capillary, it allowed to decrease EOF by 96% at pH 7.2 after acidic and basic treatments, whereas PVA coating lead only to a 76% decrease. The glycerol CIEF system was more satisfying for the separation of model proteins classically used as pI markers. Finally, the use of "narrow pH cuts" of carrier ampholytes added to commercial ampholyte mixtures allowed increasing resolution up to a factor 2.4 at a chosen pH for the separation of pI markers and milk proteins.     

Cross-linked poly(vinyl alcohol) as permanent hydrophilic column coating for capillary electrophoresis.

A fast method for the generation of permanent hydrophilic capillary coatings for capillary electrophoresis (CE) is presented. Such interior coating is effected by treating the surface to be coated with a solution of glutaraldehyde as cross-linking agent followed by a solution of poly(vinyl alcohol) (PVA), which results in an immobilization of the polymer on the capillary surface. Applied for capillary zone electrophoresis (CZE) such capillaries coated with cross-linked PVA exhibit excellent separation performance of adsorptive analytes like basic proteins due to the reduction of analyte-wall interactions. The long-term stability of cross-linked PVA coatings could be proved in very long series of CZE separations. More than 1000 repetitive CE separations of basic proteins were performed with stable absolute migration times relative standard deviation (RSD > 1.2%) and without loss of separation efficiency. Cross-linked PVA coatings exhibit a suppressed electroosmotic flow and excellent stability over a wide pH range.     

Application of plasma-polymerized films for isoelectric focusing of proteins in a capillary electrophoresis chip

The first use of plasma polymerization technique to modify the surface of a glass chip for capillary isoelectric focusing (cIEF) of different proteins is reported. The electrophoresis separation channel was machined in Tempax glass chips with length 70 mm, 300 microm width and 100 microm depth. Acetonitrile and hexamethyldisiloxane monomers were used for plasma polymerization. In each case 100 nm plasma polymer films were coated onto the chip surface to reduce protein wall adsorption and minimize the electroosmotic flow. Applied voltages of 1000 V, 2000 V and 3000 V were used to separate mixtures of cytochrome c (pI 9.6), hemoglobin (pI 7.0) and phycocyanin (pI 4.65). Reproducible isoelectric focusing of each pI marker protein was observed in different coated capillaries at increasing concentration 2.22-5 microg microL(-1). Modification of the glass capillary with hydrophobic HMDS plasma polymerized films enabled rapid cIEF within 3 min. The separation efficiency of cytochrome c and phycocyanin in both acrylamide and HMDS coated capillaries corresponded to a plate number of 19600 which compares favourably with capillary electrophoresis of neurotransmitters with amperometric detection.     

pKa shift-associated effects in enantioseparations by cyclodextrin-mediated capillary zone electrophoresis.

Enantioselective migration of dansylated (Dns) amino acids in the presence of hydroxypropylated-beta-cyclodextrin under acidic conditions near the pI value of the analytes was investigated by means of capillary zone electrophoresis. Based on the migration data, the pH dependence of the complexation constants was evaluated, as well as the variation of the complex mobilities with pH. As a result of these data, the migration behavior in the pH region near the pI could be understood, which, in some instances, includes the reversal of migration order upon variation of selector concentration. The enantioselective pKa shifts upon complexation could be quantitated for the carboxylic and the amino group separately. pKa shifts were found in the order of 0.8 pI units, the differences between the enantiomers being up to 0.25 pH units. These data were in agreement with the pI shifts reported from isoelectric focusing experiments. The accurate determination of the pI values of the Dns amino acids makes it possible to calibrate the pI scale in isoelectric focusing in the presence of chiral selectors.     

Capillary zone electrophoresis for the analysis of glycoforms of cellobiohydrolase

Cellobiohydrolase (CBH) is an important enzyme for the conversion of lignocellulosic biomass to ethanol. This work separated the glycoforms of CBH possessing different numbers of neutral mannoses using capillary zone electrophoresis (CZE) in a 50 mM, pH 7.5 phosphate buffer. The method analysed CBH in an intact form using a polyacrylamide coated fused silica capillary without requiring additives or labelling of the enzyme. The migration time of the major peak was found to be 21.6±0.1 min (n=3) and the approach is suitable for testing of batch-to-batch consistency of CBH. Ease-of-use, automation and speed are the other benefits due to which the use of CZE for analysing glycoforms of CBH was concluded to be ideal.     

Labeling effects on the isoelectric point of green fluorescent protein.

We studied the effects of fluorescent labeling on the isoelectric points (pI values) of proteins using capillary isoelectric focusing with laser-induced fluorescence detection (cIEF-LIF). Specifically, we labeled green fluorescent protein (GFP) from the jellyfish Aequorea victoria with the fluorogenic dye 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ). cIEF-LIF was used to monitor the native fluorescence of GFP and showed pI changes in GFP's FQ-labeled products. Multiple labeling of GFP with FQ produced a series of products with pI values shifted towards a low pH. We verified cIEF-LIF results with traditional slab gel IEF. Our cIEF-LIF technique can routinely detect 10(-11) M of FQ-labeled protein, whereas traditional slab gel IEF with silver stain detection gives detection limits of 10(-7) M in the same samples.     

Improved capillary isoelectric focusing method for recombinant erythropoietin analysis

Human erythropoietin (EPO) is an endogenously produced glycoprotein, which plays a key role in the erythropoiesis process. Production of erythropoietin by recombinant DNA techniques has made possible its therapeutical use besides its misuse in sport competitions. The link between glycosylated form and protein activity makes necessary a method to analyze the glycoforms' distribution in the recombinant products. In this work, a capillary isoelectric focusing (cIEF) method is presented that allows the analysis of erythropoietin glycoforms. Besides, the cIEF method can be easily implemented in different laboratories. In order to get a feasible and precise cIEF method the following factors have been studied and optimized: (i) neutral coated capillaries, 27 cm long are employed, (ii) ampholytes in the pH range 2 to 10 are used, (iii) bovine beta-lactoglobulin A is chosen as internal standard, (iv) anolyte consisting of 91 mM H3PO4 in cIEF gel is made by weight and catholyte is prepared by titrating 20 mM NaOH with H3PO4 to pH 11.85-11.90, (v) sample is completely depleted of excipients and sodium chloride 10 mM final concentration is added, and (v) t(n)/t(I.S.) and (A(n) - A(I.S.))/A(I.S.), n being the recombinant EPO glycoform considered and I.S. the internal standard, are chosen as indexes to express migration time and area. As a result, a precise method to analyze erythropoietin by capillary isoelectric focusing is achieved with intra-assay RSD < or = 0.5% for index time and < or = 1.5% for index area and inter-sample, inter-anolyte, and inter-catholyte precision better than 3.4% for index time and RSD lower than 2.2% for index area.     

Protein separation by open tubular capillary electrochromatography employing a capillary coated with phenylalanine functionalized tentacle-type polymer under both cathodic and anodic electroosmotic flows

The use of a phenylalanine (Phe) functionalized tentacle-type polymer coated capillary column for protein separation by open tubular capillary electrochromatography (OTCEC) was demonstrated in this work. The tentacle-type stationary phase was prepared from silanized fused-silica capillaries of 50 microm I.D. by glycidyl methacrylate graft polymerization and subsequent Phe functionalization. Due to the amphoteric functional groups of the Phe bonded on the tentacle-type polymer stationary phase, protein separation in the prepared column can be performed under both cathodic and anodic electroosmotic flow (EOF) by varying the pH values of the mobile phase. Model proteins including ribonuclease A (RNase A), myoglobin, transferrin, insulin were baseline separated under cathodic EOF with a mobile phase of pH 8.8. Comparison between the separation result of the four proteins under conditions of OTCEC and capillary zone electrophoresis indicates that the migration behavior of the four proteins in the prepared column was the result of the interplay of chromatographic retention and electrophoretic migration. Besides, three basic proteins including RNase A, cytochrome c (Cyt-c) and lysozyme (Lys) were fully resolved under anodic EOF with an acidic running buffer (pH 2.5). The elution order was the same as the isoelectric point values of the proteins (RNase A相似文献   

Separation of phenotypically indistinguishable Candida species, C. orthopsilosis, C. metapsilosis and C. parapsilosis, by capillary electromigration techniques

At the current state of laboratory diagnostics, methods for fast identification of phenotypically indistinguishable species are difficult or inaccurate. An example is represented by Candida parapsilosis, which is the second most common yeast species isolated from bloodstream infections. C. parapsilosis comprises a complex of three genetically distinct groups. Genotypes II and III have been designated as the separate species Candida orthopsilosis and Candida metapsilosis, phenotypically indistinguishable. The considerable genetic variability of these newly described yeasts species has caused difficulties in the development of molecular techniques for their precise identification. Similarly, the detection of biofilm formation, which is considered as an important yeast virulence factor, is accompanied by difficulties. In this study we optimize the first precise and reproducible method for the separation and possible identification of C. orthopsilosis, C. metapsilosis and C. parapsilosis as well as the detection of their ability to form biofilm. The method is based on capillary isoelectric focusing and capillary electrophoresis with UV detection. In capillary isoelectric focusing, very narrow pH gradients were established. With such gradients, differences in isoelectric points of biofilm-negative and biofilm-positive species calculated from the migration times of the selected pI markers were below 0.03 pI units. In the capillary zone electrophoresis narrow zones of the cells of Candida species were detected with sufficient resolution. The values of the isoelectric point and the migration velocities of the examined species were independent on the origin of the tested strains. Capillary isoelectric focusing was examined also for the separation and detection of the cultivated biofilm-negative C. parapsilosis in the blood serum.     

全柱成像毛细管等电聚焦电泳分析蛋白质药物电荷异质性

评价了cIEF-WCID检测多肽与蛋白质药物等电点的应用效果。测定标准多肽的等电点,验证了cIEF-WCID具有高的准确度和良好的重复性(相对标准偏差0.50%)。人血红蛋白的4种主要异构体实现了基线分离;甘赖胰岛素的重复测试均只检出单一特征峰(p I 5.95±0.01);比较重组人生长激素原液和成品,等电点特征峰比例差异明显,且成品有新特征峰出现;对比进口及国产贝伐单抗,发现厂家1、3与原研药基本一致,厂家1的主成分迁移规律与原研药高度一致,厂家2的重链C末端K缺失、N末端焦谷氨酸环化或脱酰胺修饰影响了电荷异质性;通过考察尿素浓度、电解质范围和聚焦时间,优化了检测重组人促卵泡素等电点条件:2 mol/L尿素,两性电解质pH 2.5~5.0与pH 3.0~10.0按1∶1混合,聚焦电压1 000 V(1 min)~1 800 V(4 min)~2 200 V(1 min)。cIEF-WCID可快速、准确测定具有电荷异质性的蛋白类药物等电点,分辨率和重复性好,尤其是可以跟踪聚焦过程中样本的迁移特征,特别适合蛋白类药物复杂电荷异质性的检测。     

General experimental aspects of the use of isoelectric buffers in capillary electrophoresis.

Four acidic, isoelectric buffers, for peptide and protein separations, have been recently described and adopted in capillary zone electrophoresis: cysteic acid [Cys-A, isoelectric point (pI) 1.85], iminodiacetic acid (IDA, pI 2.23), aspartic acid (Asp, pI 2.77) and glutamic acid (Glu, pI 3.22). These four buffers allow to explore an acidic portion of the titration curves of macroions, covering about 1.6 pH units (from pH 1.85 to ca. 3.45), thus permitting resolution of compounds having coincident titration curves at a given pH value. Given the rather acidic pI values of these buffers, their long-term stability has been investigated, by monitoring pH and conductivity changes upon increasing storage times. When dissolved in plain water, all four buffers appear to give constant pH and conductivity readings up to 15 days; after that, the conductivity keeps steadily increasing in a similar fashion. The same parameters, when the same buffers are dissolved in 6 M urea, appear to be stable for only one week, with the conductivity progressively augmenting after this period. A similar behaviour is exhibited by histidine (pI 7.70), a neutral, isoelectric buffer adopted for separation of DNA fragments. By mass spectrometry, Cys-A shows minute amounts (ca. 1%) of a degradation product after ageing for 3 weeks; in the same time period, Glu is extensively degraded (20%). No degradation species could be detected in IDA and Asp solutions. It is additionally shown that the acidic buffers are not quite stationary in the electric field, but can be transported at progressively higher rates (according to the pI value) from the cathodic to the anodic vessel. This is due to the fact that, at their respective pI values, a fraction of the amphotere has to be negatively charged in order to provide counterions to the excess of protons due to bulk water dissociation. Guidelines are given for the proper use and storage of such buffers.     

Factors Affecting the Performance of Capillary Isoelectric Focusing in Dynamically Coated Capillaries Using Polyethylene Oxide Polymer

Abstract

A simple, robust and reproducible capillary isoelectric focusing method using dynamically coated fused silica capillaries was developed. Simultaneous focusing and mobilization was successfully carried out using the hydrophilic polymer polyethylene oxide (PEO), which was added during sample preparation. The effects of preconditioning and anolyte and catholyte concentrations on the resolution and reproducibility of the method were optimized. Statistical screening of the significance of the effects of pressure, voltage, PEO concentration, and molecular weight on the efficiency of dynamic coating was carried out. Full-factorial design and analysis of variance (ANOVA) were used in order to determine the significance of each variable on the performance of the dynamic coat. Three response variables were selected to evaluate the method performance: migration time of a basic protein marker, migration time of an acidic protein marker, and difference in migration time between both markers. An empirically determined second order polynomial was employed to describe the relationship between the migration time and the isoelectric point under the experimental conditions studied in order to validate the method performance. The method was used under non-denaturing conditions to resolve a mixture of four standard proteins having isoelectric points covering a wide pH range (pH 3–11).     

Dynamic capillary coatings with zwitterionic surfactants for capillary isoelectric focusing

The use of surfactants as additives was demonstrated for the first time in capillary isoelectric focusing (CIEF) to dynamically modify the surfaces of bare fused silica capillaries. These surfactants were zwitterionic sulfobetaines: dodecyldimethyl (3-sulfopropyl) ammonium hydroxide (C12N3SO3), hexadecyldimethyl (3-sulfopropyl) ammonium hydroxide (C16N3SO3) and coco (amidopropyl)hydroxyldimethylsulfobetaine (Rewoteric AM CAS U). They were added directly to the protein-ampholyte mixture, and remained in the capillary during isoelectric focusing and mobilization. The C16N3SO3 and CAS U coatings were shown effective in CEF. Separation of seven IEF protein standards was obtained, with significantly improved resolution compared to that from an uncoated silica capillary. The effect of these surfactants on the electroosmotic flow (EOF) in CIEF was determined. CAS U was effective in suppressing the EOF at neutral and alkaline pH conditions, C16N3SO3 was effective in suppressing EOF at acidic and neutral pH conditions. C12N3SO3 however had little effect on the EOF. The pH gradients formed inside these surfactant coated capillaries were recta-linear at pH 6 to 9 (R2 approximately equal to 0.99). Reproducibility of migration time and peak area was determined. For all three coatings, the migration time standard deviations were less than 1.6 min, and the relative standard deviations of area were below 10%. The protein recovery in the CAS U-modified capillary was quantitative or near-quantitative for five of the seven proteins studied.     

毛细管等电聚焦分离蛋白质

采用均匀设计法进行未涂壁石英毛细管等电聚焦研究,考察两性电解质、甲基纤维素、四甲基乙二胺和牛磺酸几种组分对等电聚焦的影响,确定出了比较合适的浓度范围。当中性蛋白质迁移通过检测窗后,在进样端施加一低气压,从而使酸性蛋白质得到很好的分离,适用于较宽的ｐＩ范围。方法的重复性好,为蛋白质分离鉴定提供一种有力的工具。     

Extension of separation range in capillary isoelectric focusing for resolving highly basic biomolecules

The non-availability of commercial carrier ampholytes in the pH range greater than 11 has contributed to difficulties in focusing and resolving highly basic proteins/peptides using capillary isoelectric focusing (cIEF). Two different approaches, involving the use of N,N,N',N'-tetramethylethylenediamine (TEMED) and ampholyte 9-11, are investigated for their effects on the extension of separation range in cIEF. The addition of TEMED into pharmalyte 3-10 not only prevents the peptides/proteins from focusing in sections of the capillary beyond the detection point, but also extends the separation range to at least isoelectric point (pI) 12. The combination of ampholyte 9-11 with pharmalyte 3-10 surprisingly provides baseline resolution between bradykinin (pI 12) and cytochrome c (pI 10.3). The sample mixture, containing bradykinin, the high-pI protein calibration kit (pI 5.2-10.3), and cytochrome c digest, is employed to demonstrate the cIEF separation of proteins and peptides over a wide pH range of 3.7-12.     

Characterization of antithrombin III from human plasma by two-dimensional gel electrophoresis and capillary electrophoretic methods

The isoforms distribution of the glycoprotein antithrombin III (ATIII) derived from human plasma was investigated by means of isoelectric focusing (IEF) in polyacrylamide gels with immobilized pH gradients (IPG) and two-dimensional gel electrophoresis (2-DE) as well as capillary electrophoretic methods. It turned out that the presence of high concentrations of chaotropics (urea, thiourea) and zwitterionic detergents (3-[(3-cholamidepropyl)dimethylammonio]-1-propanesulfonate (CHAPS)) was decisive for attaining good resolution of the protein isoforms. Resolution by IPG-IEF was obtained with excellent reproducibility and pI differences down to 0.01 pH units could be distinguished. ATIII-alpha and ATIII-beta-fractions preseparated by heparin affinity chromatography showed an analogous but shifted spot pattern consisting each of one major and three minor isoforms. The main isoforms of ATIII-alpha and ATIII-beta exhibit pI values of 5.18 and 5.32, respectively, both values determined in the presence of high concentrations of urea. The pI difference of 0.14 pH units correspond to the effect of two sialic acids absent in ATIII-beta. The formation and occurrence of ATIII dimers and trimers turned out to be dependent on the sample preparation. The results obtained by 2-DE were compared with those of capillary zone electrophoresis (CZE) and capillary IEF (CIEF). Quantitative analysis regarding the CZE separated isoforms of plasma derived ATIII yielded a content of about 70% ATIII-alpha main isoform and about 6.6% of ATIII-beta. The pI values of ATIII determined by CIEF with internal calibration were in fair agreement with the pI values of the main isoforms achieved with 2-DE.     

Separation of carbohydrate-mediated microheterogeneity of recombinant human erythropoietin by free solution capillary electrophoresis. Effects of pH, buffer type and organic additives

Free solution capillary electrophoresis has been investigated as an alternative to isoelectric focusing for the separation of the glycoforms of recombinant human erythropoietin (r-HuEPO), a primary regulator of erythropoiesis. A systematic approach was used to study the effect of pH, buffer type and organic modifiers on the resolution of the microheterogeneity of erythropoietin. The main factors for improving the resolution were the regulation of the electroosmotic flow of the running buffer and the reduction of solute-wall interaction. The best resolution of the glycoforms of r-HuEPO was obtained with a mixed buffer pH 4.0 (100 mM acetate-phosphate, 10 h preequilibration time).     

Cycloaliphatic epoxy resin coating for capillary electrophoresis

Coating the interior surface of a fused-silica capillary with a polymeric material has long been used in capillary electrophoresis (CE) to reduce or eliminate electroosmotic flow and suppress adsorption. A cycloaliphatic epoxide-based resin was bonded to silane treated capillaries and crosslinked with a curing agent. The epoxy resin coating significantly reduced electroosmotic flow over a pH range of 3-10. This coating was sufficiently hydrophilic to suppress protein adsorption. The epoxy resin coated capillary was used to separate several acidic and basic proteins and peptides. Separation efficiencies greater than 400,000 theoretical plates were achieved. The relative standard deviations in migration times for proteins were <0.8%. Speed and simplicity are important advantages of the coating procedure compared to other published coating methods.     

新型共聚物涂层毛细管电泳柱及其分离蛋白质的研究

研究新型共聚物——ＺＢ系列表面键合剂在毛细管电泳中的应用。采用物理吸附的方法制备了ＺＢ－００４,ＺＢ－０１４,ＺＢ－０１６等３种涂层毛细管柱,在ｐＨ３～５范围内,３种涂层均能有效地降低管壁对蛋白质的吸附作用和电渗流,其中亲水性较弱的ＺＢ－００４涂层的分离性能最好。在ｐＨ＜５时,涂层具有较高的稳定性和良好的分析重复性,但在更高的ｐＨ值条件下,仍然存在着峰形畸变和电渗流迅速增加的现象。     

A family of high-buffering capacity diamino sulfate isoelectric buffers for pH-biased isoelectric trapping separations

pH-biased isoelectric trapping separations are hindered by the lack of suitable isoelectric buffers with pI values in the 5.8 < pI range. Two generic approaches are described here for the cost-effective synthesis of a family of diamino sulfate buffers that have high buffering capacities in their isoelectric state: the first approach relies on the sulfation of existing, commercially available diamino alcohol intermediates, the second approach calls for the synthesis of diamino alcohols from epichlorohydrin and widely available secondary amines, and subsequent sulfation of the new diamino alcohol. The diamino sulfate buffers are recovered in isoelectric state, in high purity. Four members of the family having pI values in the 5.8 < pI < 8.9 range have been synthesized, analytically characterized by capillary electrophoresis (CE), electrospray ionization-time of flight-mass spectrometry (ESI-TOF-MS), 1-D and 2-D nuclear magnetic resonance (NMR) spectroscopy, and X-ray crystallography. All four diamino sulfates have been successfully used as pH biasers in the receiving stream in preparative-scale pH-biased isoelectric trapping protein separations.