离子液体中Au(111)和Pt(111)表面Ge欠电位沉积的现场STM研究

本文研究BMIPF₆离子液体中Au(111)和Pt(111)表面Ge的电沉积行为. 循环伏安法测试结果表明,在含0.1 mol·L^-1 GeCl₄的BMIPF₆溶液Au(111)和Pt(111)表面均有两个与Ge沉积过程相关的还原峰. 第一个还原峰包含了Ge⁴⁺还原成Ge²⁺及Ge的欠电位沉积,第二个还原峰对应Ge的本体沉积. 现场扫描隧道显微镜研究结果表明,Ge在Au(111)和Pt(111)表面均有两层欠电位沉积. 第一层欠电位沉积厚度约为0.25 nm、形貌平整、带有缝隙的亚单层结构. 第二层欠电位沉积形貌相对粗糙的点状团簇结构. 该欠电位沉积过程伴随表面合金化.     

Zinc underpotential deposition at Pt(111) and Pt(110) under the influence of boric acid and chloride anions

Zinc underpotential deposition (Zn UPD) was studied by cyclic voltammetry in solutions of various pH and composition, where the effects of the presence of boric acid or chloride in the solution were observed. We have found that the cyclic voltammograms of Zn UPD at Pt(111) were dependent on boric acid concentrations, zinc ion concentrations, and pH in acidic solutions. These suggest that the induced adsorption of borate by releasing of H⁺ is accompanied with Zn UPD. The preadsorbed chloride species on Pt(110) accelerate the UPD process by their removal just before the UPD, making the surface sites available for the process, and the UPD remains at identical electrode potentials, while the chloride ions do not take part in the induced adsorption on UPD Zn at Pt, as clearly found by the radiotracer method. These show that the anions play versatile roles in the process of adlayer formation by their different but essential chemical characteristics. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 6, pp. 745–751 The text was submitted by the authors in English.     

A.c. impedance behaviour of processes involving adsorption and reactivity of guanidonium-type cations at Pt(1 0 0) surface

The present paper reports a.c. impedance spectroscopic studies on adsorption of guanidonium (G⁺) and N,N-dimethylguanidonium (DMG⁺) resonant cations at Pt(1 0 0) single-crystal surface. The resulted information provided confirmation of the role of electrosorption of the above-mentioned molecule–ions through evaluation of the associated charge-transfer resistances and capacitances for the Pt(1 0 0) plane in 0.5 M H₂SO₄. These results also provided support for the interfacial ion-pairing mechanism that had been based on the voltammetric and in situ FTIR spectroscopic results published earlier.     

Synthesis and characterization of preferentially oriented (1 0 0) Pt nanowires

Two types of platinum deposits were obtained by potentiostatic deposition onto Ti substrates, namely platinum black (Pt B) and platinum nanowires (Pt NW) with the latter being achieved through a porous anodic aluminum oxide (AAO) membrane at the solution/substrate interface. Surface characterization of these deposits was performed using scanning electron microscopy (SEM) and cyclic voltammetry (CV) in sulphuric acid solution. Surface properties for Pt NW revealed a predominant presence of (1 0 0) crystallographic planes, not present in Pt B deposit grown in the same conditions. Also, Pt NW exhibits an increased resistance to electrochemically active surface area (EASA) loss upon potential cycling in acidic solution, as compared to Pt B.     

Structure-relationships in electrocatalysis: oxygen reduction and hydrogen oxidation reactions on Pt(111) and Pt(100) in solutions containing chloride ions

Kinetics of the oxygen reduction reaction (orr) and the hydrogen evolution–oxidation reactions (her/hor) were studied on the Pt(111) and Pt(100) surfaces in 0.05 M H₂SO₄ containing Cl⁻. The orr is strongly inhibited on the (100) surface modified by adsorbed Cl⁻ (Cl_ad), and it occurs as a 3.5e⁻ reduction via solution phase peroxide formation. In the hydrogen adsorption (H_upd) potential region, the orr is even more inhibited, and corresponds only to a 2 e⁻ reduction at the negative potential limit where the electrode is covered by one monolayer of H_upd and some (unknown) amount of Cl_ad. On the Pt(111)---Cl_ad surface, the orr is inhibited relatively little (in addition to that caused by strong bisulfate anion adsorption on this surface), and the reaction pathway is the same as in Cl⁻ free solution. The kinetics of the hor on Pt(111) are the same in pure solution and in a solution containing Cl⁻, since Cl_ad does not affect platinum sites required for the breaking of the H---H bond. A relatively large inhibition of the hor is observed on the (100) surface, implying that strongly adsorbed Cl_ad is present on the surface even near 0 V.     

Kinetics of underpotential deposition and nucleation of copper on the Pt(111) face in the presence of acetonitrile

The kinetics of underpotential deposition, three-dimensional nucleation, and growth of copper deposits at cathodic overpotentials on a Pt(111) electrode in solutions containing 0.5 M H₂SO₄, 10 mM CuSO₄, and 0–200 mM acetonitrile (AcN) is studied by the cyclic voltammetry, potentiostatic current transients, and scanning probe microscopy methods. At low volume concentrations of acetonitrile ([AcN] ≤ 4 mM), adsorbed acetonitrile molecules accelerate the formation of a co-adsorption lattice of copper adatoms with anions due to local electrostatic effects at the charged interface. At higher concentrations, the underpotential deposition process is hampered, but the desorption of copper adatoms occurs at potentials more positive than those at low acetonitrile concentrations. This effect is attributed to a stabilizing action of acetonitrile molecules situated on the layer of copper adatoms and, in part, on platinum. At [AcN] = 0.4–40 mM, adsorbed acetonitrile molecules accelerate the growth of the bulk copper deposit, but the nucleation stage is hindered. The dependence of the copper amount on the deposition potential at [AcN] = 40 mM exhibits a maximum at 0.15–0.17 V. This effect was previously observed in weakly acid solutions (pH 1.7–3.0) containing no acetonitrile. The maximum rate of the deposit growth corresponds to an optimum number of crystallites (which is not too great) and an optimum distance between the growing centers in conditions of mixed kinetics “diffusion + electron transfer.” A substantial number of complexes Cu(I)-AcN forms at high acetonitrile concentrations.     

Tetrakis(tetrahydrofuran-O)calcium-bis[pentacarbonyl(cyano)chromat(0)], -molybdat(0)] und -wolframat(0)]

Tetrakis(tetrahydrofuran- O )calcium bis[pentacarbonyl(cyano)chromate(0)], -molybdate(0)], and -tungstate(0)] The reaction of (THF)₂Ca[N(SiMe₃)₂]₂ with hexacarbonylchromium, -molybdenum, and -tungsten yields hexamethyldisiloxane and tetrakis(tetrahydrofuran-O)calcium bis[pentacarbonyl(cyano)chromate(0)] ( 1 ), -molybdate(0)] ( 2 ), and -tungstate(0)] ( 3 ), respectively. Compound 1 crystallizes in the centrosymmetric space group P 1, whereas the other two complexes 2 and 3 are isotypic (monoclinic, P2₁/n). In all these compounds the calcium atom is bonded to the nitrogen atoms of the cyano ligands and bent Ca–N–C fragments with angles of 158,3° ( 1 ), 161,2° ( 2 ), and 161,3° ( 3 ) are observed.     

New understanding of the nature of OH adsorption on Pt(1 1 1) electrodes

The adsorption of hydroxyl on Pt(1 1 1) single crystal electrodes from aqueous acidic solutions is carefully reinvestigated. The effect of small additions (10⁻⁸–10⁻⁵ M) of chloride and bisulphate anions on the OH adsorption region in perchloric acid solution has been studied. Two regions can be differentiated in the voltammetric profile, that behave differently after the addition of the foreign anion. The initial broad adsorption process is unaffected until the highest concentration is attained. However, the sharper peak at higher potentials is affected even at the lower anion concentration. Since mass transport limitations allow to discard the anion adsorption as the main process giving this peak, we propose that the two processes are due to the dissociative adsorption of two different kinds of water, that are affected by the anion in a different way. From this idea, a new model, based on the Frumkin adsorption isotherm, is proposed, which gives an excellent fit of the experimental results.     

Molecular orientation of CO adsorbed on clean and Al-modified Ru(0 0 0 1) surfaces

Chemisorption of CO on the bare and Al precovered Ru(0 0 0 1) surface as well as on the Al₂Ru surface alloy, was studied by means of angle-resolved photoelectron spectroscopy using unpolarised He II radiation. Whereas CO molecules stand upright on the clean Ru(0 0 0 1) surface, as deduced by applying the symmetry selection rules of photoemission, they adsorb in a tilted geometry on the Al-precovered Ru(0 0 0 1) surface. On an Al₂Ru surface alloy, produced by annealing the Al-covered Ru(0 0 0 1) surface up to 1100 K, the CO molecules are again found to stand upright, as on the clean Ru(0 0 0 1) surface. The Al atoms, incorporated into the topmost Ru layer, do not have a significant influence on the orientation of the axis of the CO molecules.     

Organotransition-Metal Complexes of Multidentate Ligands 3. The Unexpected Derivatives of Bis(3,5-Dimethylpyrazol-1-YL)Methanetetracarbonylmolybdenlim(0) and-Tungsten(0) Complexes

Thermolysis of (H₂CPz′₂)M(CO)₄ (H₂CPz′₂ = bis(3,5-dimethylpyrazol-1-yl)methane; M=Mo, W) in 1,2-dimethoxyethane did not give the expected 16-electron complexes, (H₂CPz′₂)M(CO)₃, but gave dinuclear compounds, [(H₂CPz′₂)M(CO)₃]₂, probably containing two linear carbonyl bridges and no metal-metal interactions. The dimers reacted with CH₃CN to give mononuclear compounds, (H₂CPz′₂)M(CO)₃(NCCH₃), identical to the substitution products between (H₂CPz′₂)M(CO)₄ and CH₃CN.     

Density-functional study for the NOx (x = 1, 2) dissociation mechanism on the Cu(1 1 1) surface

Spin-polarized density functional theory calculation is employed to study the adsorption and dissociation of NO₂ molecule on Cu(1 1 1) surface. It is shown that the most favorable adsorption structure is the NO₂ (T,T-O-,O′-nitrito) configuration which has an adsorption energy of −1.49 eV. The barriers for step-wise NO₂ dissociation reaction, NO_2(g) → N_(a) + 2O_(a), are 1.05 (for O–N–O bond activation), and 2.08 eV (for N–O bond activation), respectively, and the entire process is 0.6 eV exothermic. The energetics of single N–O dissociation with and without the presence of N atom or O atom on the surface are also calculated. The results indicate that in the presence of O atom on Cu(1 1 1) surface would raise the N–O dissociation barrier, whereas in the presence of N atom decrease it. The interaction nature between adsorbates and substrate is analyzed by the local density of states (LDOS) calculation.     

The chemistry of (1-azabuta-1,3-diene)tricarbonyliron(0) complexes

In this review, an overview of synthetic and structural aspects of 1-azabuta-1,3-diene complexes of iron is given and the reactivity of these complexes is discussed with regard to inorganic, organometallic, organic and stereochemical aspects of their chemistry. Their application in the synthesis of organic and organometallic target compounds, or as transfer reagents of the tricarbonlyiron(0) moiety is demonstrated.     

A many-body theory of the Ti M2,3-VV Auger-photoelectron coincidence spectroscopy (APECS) spectrum of TiO2(1 1 0)

We calculated the Ti M_2,3-VV Auger-photoelectron coincidence spectroscopy spectrum of TiO₂(1 1 0) by a many-body theory. The spectral main line is governed by the DOS of the two O 2p holes living longer than the Ti ∣cd²L²〉 → ∣L²〉 super Coster-Kronig (sCK) decay. The two O 2p holes are created by the charge transfer core-hole screening at the Ti atomic site. Here c and L are the Ti 3p hole and the ligand O 2p hole, respectively. Analysis of the spectrum shows that the two (or three) CT O 2p holes in the π bonding states are localized, whereas those in the σ bonding states are delocalized. The three localized CT O 2p (π) holes in ∣cd³L³〉 in Ti M_2,3 main line (or satellite) of TiO₂(1 1 0) live longer than the Ti ∣cd³L³〉 → ∣d¹L³〉 sCK decay so that the Coulomb repulsion from the surrounding Ti ions gives the O⁺ ion desorption from the surface.     

Cyclic Voltammetry and Structural Studies of Nitric Oxide Monolayers Adsorbed on Pt(111)

The structural analysis of the adsorption of NO monolayers on Pt(111) from solution has been explored by cyclic voltammetry (CV) and X‐ray photoelectron spectroscopy (XPS) techniques. The monolayers were formed from acid solutions saturated with NO gas as well and from nitrite solutions in sulfuric acid. Results by both techniques indicate a maximum coverage of 0.2 monolayers as well as the presence of NO molecularly adsorbed on the surface with different orientations. The voltammetric oxidation of NO gives rise to two peaks separated in the voltammogram by 50 mV. This value is in agreement with the theoretical value of 9 kJ corresponding to the difference between different adsorption sites. A mechanism for the surface mediated oxidation process from adsorbed NO to NO₂ under potential control is proposed.     

Synthesis of single-crystal silver slices with predominant (1 1 1) facet and their SERS effect

In this article, single-crystal silver slices with predominant (1 1 1) facet were synthesized at room temperature with chitosan by a facile, one-pot, and totally green method. XRD, UV-visible and infrared spectroscopy have been employed for identifying chitosan-protected silver nanoparticles (NPs), while SEM, TEM were used to confirm silver NPs orientation along the (1 1 1) direction to form various shapes such as hexagon, trapezium, triangle and so on. The results showed that chitosan, a novel environmentally benign and excellently biocompatible material, serves not only as a reducing agent but also as a stabilizer for the growth of anisotropic silver NPs. The single-crystal silver slices with major facet of (1 1 1) can be used as a surface-enhanced Raman scattering (SERS) substrate, and crystal violet (CV) as a Raman probe to evaluate its enhancement ability. It was found that the enhancement ability of the silver slices was remarkable.     

碱性介质中CO对甲醇在PtAu(111)和Pt(111)表面氧化生成甲酸的影响的第一性原理研究

采用密度泛函理论计算研究了碱性介质中甲醇在清洁的PtAu(111)和Pt(111)表面、及有CO存在的PtAu(111)和Pt(111)表面的氧化。计算结果表明,在碱性介质中,预吸附的CO促进了甲醇在PtAu(111)和Pt(111)表面氧化的每一步反应,这与其在Au(111)表面的作用相似。究其原因,是由于CO的吸附增强了OH的稳定性和碱性,从而增强了OH夺取氢原子的能力。     

Accurate determination of the CO coverage at saturation on a cyanide-modified Pt(1 1 1) electrode in cyanide-free 0.5 M H2SO4

We have used the CO charge-displacement method, in combination with a thermodynamic cycle, to obtain the double-layer correction necessary to determine accurately, using the charge in the corresponding CO-stripping voltammograms, the maximum amount of CO that can adsorb on a cyanide-modified Pt(1 1 1) electrode. The resulting CO coverage at saturation is θ_CO=0.25, and corresponds to a mixed CN–CO adlayer where some Pt atoms are still free and consequently can adsorb hydrogen. The hydrogen adsorption charge for the mixed adlayer, obtained from the corresponding cyclic voltammogram, agrees very well with that estimated from the CO and CN coverages, assuming that one hydrogen atom adsorbs on every free Pt atom. Taking into account these data, we propose a structural model for the mixed CN–CO adlayer on Pt(1 1 1).     

Experimental (solid + liquid) phase equilibria of (alkan-1-ol + benzonitrile), (amine + benzonitrile) binary mixtures,and (decan-1-ol + decylamine + benzonitrile) ternary mixtures

(Solid + liquid) phase diagrams, SLE have been determined for (octan-1-ol, or nonan-1-ol, or decan-1-ol, or undecan-1-ol + benzonitrile) and for (hexylamine, or octylamine, or decylamine, or 1,3-diaminopropane + benzonitrile) using a cryometric dynamic method at atmospheric pressure. Simple eutectic systems with complete immiscibility in the solid phase and complete miscibility on the liquid phase have been observed. The solubility decreases with an increase of the number of carbon atoms in the alkan-1-ol, or amine chain. The temperature of the eutectic points increases and shifts to lower alkan-1-ol, or amine mole fractions as the alkyl chain length of the alkan-1-ol, or amine increases. The higher intermolecular interaction was observed for the (alkan-1-ol + benzonitrile) systems.     

多孔聚乙酰苯胺纳米纤维载铂催化剂对甲醇的电催化氧化

采用简单的化学氧化聚合法制备了新型多孔结构的聚乙酰苯胺纳米纤维(np-PAANI), 并以此为载体在络合剂的存在下合成了Pt纳米微粒修饰的np-PAANI复合物膜电极C/np-PAANI/Pt. 样品的形貌和结构通过扫描电镜(SEM)、透射电镜(TEM)和X射线衍射(XRD)进行了表征. 在0.5 mol·L-1 CH3OH+0.5 mol·L-1 H2SO4混合溶液中考察了C/np-PAANI/Pt催化剂对甲醇的电催化氧化性能. 结果表明, 以np-PAANI负载的Pt催化剂对甲醇的电催化氧化活性和稳定性都比普通PAANI结构及石墨粉负载的Pt催化剂好很多.