边界扫描测试在数字电路自动测试系统中的研究与应用[BT)]

边界扫描测试是当前数字电路模块故障隔离的主要手段,但测试能力受到模块可测试性设计限制,其它方面作用也被忽略。文中对数字电路自动测试系统设计提出了边界扫描测试应用技术,包括系统自检测试,模块功能测试和模块故障隔离。在系统自检测试中应用边界扫描,提高了设备自检故障隔离精度;而对于模块功能测试,边界扫描测试技术提供了一种新的选择;在故障隔离中扩展和延伸应用边界扫描技术,突破了模块自身测试性的限制,提高了边界扫描测试的故障覆盖率和故障隔离精度。通过实际测试验证表明,该设计方法稳定可靠,同时提升了测试系统自身和模块的测试能力和隔离精度。     

Normal modes and quality factors of spherical dielectric resonators: I — shielded dielectric sphere

Electromagnetic theoretic analysis of shielded homogeneous and isotropic dielectric spheres has been made. Characteristic equations for the TE and TM modes have been derived. Dielectric spheres of radii of the order of μm size are found suitable for the optical frequency region whereas for the microwave region radii of the order of mm size are found suitable. Parameters suitable for their application in the optical and microwave frequency ranges have been used to compute the frequencies corresponding to the normal modes for the TE and TM modes. Expressions for the quality factors for realistic resonators, i.e., for a dielectric sphere with a non-zero conductivity and a metal shield with a finite conductivity have also been derived for the TE and TM modes. Computations of the quality factors have been made for resonators with parameters suitable for the optical and the microwave regions.     

Thermodynamic design data for double effect absorption heat pump systems using water-lithium chloride—cooling

In this paper, thermodynamic design data are investigated for the water-lithium chloride pair and a comparative study of the water-LiCl pair with the water-LiBr pair is given, for double-effect absorption cooling systems used for the computer simulation. The computer simulation is based on mass, material and heat balance equations for each part of the system. Coefficients of performance and flow ratios for effects of different operating temperatures are investigated. It is found that the cooling COP is higher for the water-LiCl pair than for the water-LiBr pair, and FR is lower for the water-LiCl pair than for the water-LiBr pair.     

Optimisation of damping treatments based on big bang–big crunch and modal strain energy methods

A cost-effective methodology is needed in various applications in order to optimise damping treatments for structures. Although some methods appear to be applicable for structures with relatively simple geometries, it is still difficult to utilise them for general structures. This paper presents an efficient approach for optimisation of passive damping treatments that can be applied to general structures. First, an optimisation procedure based on big bang–big crunch optimisation method is introduced and its effectiveness for damping optimisation is evaluated. Then, a procedure based on modal strain energy method is presented for the prediction of modal damping levels for structures with damping treatments and its performance is assessed. After that, for validation purposes, the proposed optimisation methodology is used to maximise modal damping for a single mode of a structure whose optimised configurations are known for the individual modes. Finally, the performance of the proposed optimisation procedure is demonstrated for the maximisation of damping levels for multiple modes at the same time and the applicability of the approach for general structures with passive damping treatments is demonstrated.     

Effects of the use of personal music players on amplitude modulation detection and frequency discrimination

Measures of auditory performance were compared for an experimental group who listened regularly to music via personal music players (PMP) and a control group who did not. Absolute thresholds were similar for the two groups for frequencies up to 2 kHz, but the experimental group had slightly but significantly higher thresholds at higher frequencies. Thresholds for the frequency discrimination of pure tones were measured for a sensation level (SL) of 20 dB and center frequencies of 0.25, 0.5, 1, 2, 3, 4, 5, 6, and 8 kHz. Thresholds were significantly higher (worse) for the experimental than for the control group for frequencies from 3 to 8 kHz, but not for lower frequencies. Thresholds for detecting sinusoidal amplitude modulation (AM) were measured for SLs of 10 and 20 dB, using four carrier frequencies 0.5, 3, 4, and 6 kHz, and three modulation frequencies 4, 16, and 50 Hz. Thresholds were significantly lower (better) for the experimental than for the control group for the 4- and 6-kHz carriers, but not for the other carriers. It is concluded that listening to music via PMP can have subtle effects on frequency discrimination and AM detection.     

Structural and Thermodynamic Peculiarities of Core-Shell Particles at Fluid Interfaces from Triangular Lattice Models

A triangular lattice model for pattern formation by core-shell particles at fluid interfaces is introduced and studied for the particle to core diameter ratio equal to 3. Repulsion for overlapping shells and attraction at larger distances due to capillary forces are assumed. Ground states and thermodynamic properties are determined analytically and by Monte Carlo simulations for soft outer- and stiffer inner shells, with different decay rates of the interparticle repulsion. We find that thermodynamic properties are qualitatively the same for slow and for fast decay of the repulsive potential, but the ordered phases are stable for temperature ranges, depending strongly on the shape of the repulsive potential. More importantly, there are two types of patterns formed for fixed chemical potential—one for a slow and another one for a fast decay of the repulsion at small distances. In the first case, two different patterns—for example clusters or stripes—occur with the same probability for some range of the chemical potential. For a fixed concentration, an interface is formed between two ordered phases with the closest concentration, and the surface tension takes the same value for all stable interfaces. In the case of degeneracy, a stable interface cannot be formed for one out of four combinations of the coexisting phases, because of a larger surface tension. Our results show that by tuning the architecture of a thick polymeric shell, many different patterns can be obtained for a sufficiently low temperature.     

Search for chargino and neutralino production at \sqrt{s} = 181–184 GeV at LEP

A search for charginos and neutralinos, predicted by supersymmetric theories, has been performed using a data sample of 57 pb at centre-of-mass energies of 181–184 GeV taken with the OPAL detector at LEP. No evidence for chargino or neutralino production has been found. Upper limits on chargino and neutralino pair production (, ) cross-sections are obtained as a function of the chargino mass (), the lightest neutralino mass () and the second lightest neutralino mass (). For large chargino masses the limits have been improved with respect to the previous analyses at lower centre-of-mass energies. Exclusion regions at 95% confidence level (C.L.) of parameters of the Constrained Minimal Supersymmetric Standard Model are determined for the case of a large universal scalar mass, , implying heavy scalar fermions, and for the case of a small resulting in light scalar fermions and giving the worst-case limits. Within this framework and for GeV the 95% C.L. lower limits on for GeV are 90.0 and 90.2 GeV for and 35 respectively. These limits for all (the worst-case) are 69.1 and 65.2 GeV for and 35 respectively. Exclusion regions are also presented for neutralino masses, including an absolute lower limit at 95% C.L. for the mass of the lightest neutralino of 30.1 GeV for GeV (24.2 GeV for all ), with implications for experimental searches for the lightest neutralino as a dark matter candidate. Received: 19 August 1998 / Published online: 11 March 1999     

蛛丝和蚕丝化学元素X射线荧光光谱分析及其应用

采用X射线荧光光谱(XRF)方法研究蛛丝和蚕丝的化学元素组成,探讨成丝机制中金属离子的作用及生物丝性能优良的元素基础。XRF分析蚕丝中C含量是47.10%、O为29.92%、N是16.52%;金属元素包括：Ca含量0.166 2%、Mg含量0.104 0%和K含量0.039 5%,而Na,Zn,Ni,Fe和Cr是微量元素。Ca和Mg元素含量高,在桑蚕吐丝机制中起着重要的作用。在蛛丝中,主要的非金属元素是：C含量44.09%、O含量26.64%和N含量22.34%。高含量的N元素可能是蛛丝优异的刚性和韧性性能的元素基础。在蛛丝中,Na含量0.268 0%、K含量0.081 4%和Mg含量0.011 6%,而Ca,Zn,Fe,Cu和Cr则是微量元素。蛛丝中Na和K元素含量高,在蜘蛛吐丝机制中可能起重要作用。运用数学统计方法研究生物丝元素组成与XRF元素分析结果吻合。     

Tracing of interference fringes using average gray value and simultaneous row and column scan

An algorithm for computer tracing of interference fringes is reported. The method uses the average gray-level value for thresholding, row and column scans for determining the type of the scan and simultaneous row and column scan for tracing. The proposed method yield good result even for low-contrast and high-noise images. The program for the interferogram tracing was written using MATLAB6.     

Non-LTE spectral absorption coefficients for electronic band systems of diatomic molecules

Analytical expressions have been derived for the average non-LTE spectral absorption coefficients and the associated spontaneous spectral emission coefficients for electronic bands of anharmonic oscillators. Relatively simple differential expressions are provided for the important practical conditions under which the smeared-rotational-line approximation is applicable and for which individual rotational temperatures exist for the populations in each pair of the vibrational levels of interest. Further simplifications are given for the cases in which also vibrational temperatures exist for the populations of the two electronic states considered and in which the displacement of the band-heads from the band-centers can be neglected.     

Pressure and temperature derivatives of the isotropic polycrystalline shear modulus for 65 elements

Experimental values are tabulated for the temperature derivative of the isotropic polycrystalline shear modulus for 47 elements and for the pressure derivative for 39 elements. Equations are derived to estimate these derivatives, and the estimated values generally compare well with the experimental data. These equations have been used to determine pressure and temperature derivatives of the isotropic polycrystalline shear modulus for other elements for which no experimental data are available.     

Systematics of inner-shell photo-ionization X-ray lasers with constant pump rates

Population-rate equations are analytically solved for constant pump rates. Conditions for population inversions are developed for this simplified case. Numbers appropriate for inner-shell photo-ionization of magnesium and neon are used. These allow back-of-the envelope calculations for predicting lasing duration. Pump-rate thresholds are also given which permit lasing for the duration of the pumping. Blackbody-source temperatures associated with such pump rates are calculated. A method of using the solution of the small-signal population-rate equations to determine the saturated intensity when the lower lasing level has a decay channel is given. This method is applied to the case of constant pump rates. An analytic expression for the saturated intensity is developed for this case.     

Hamilton's equations for constrained dynamical systems

We derive expressions for the conjugate momenta and the Hamiltonian for classical dynamical systems subject to holonomic constraints. We give an algorithm for correcting deviations of the constraints arising in numerical solution of the equations of motion. We obtain an explicit expression for the momentum integral for constrained systems.     

New hyperbolic models of dusty gas flow

The paper presents hyperbolic models for dusty gas flow formulated for single- and multivelocity approximations with account for inter-fractional heat transfer. Characteristic analysis of equations for the model was performed. The Godunov method and linearized Riemann solver was applied for a solution on curvilinear mesh: the Prandtl?Meyer problem for air-droplet mixture was solved. The simulation results were compared with the self-similar solution.     

Ground State and Single Vortex for Bose-Einstein Condensates in Anisotropic Traps

For Bose-Einstein condensation of neutral atoms in anisotropic traps at zero temperature, we present simple analytical methods for computing the properties of ground state and single vortex of Bose-Einstein condensates, and compare those results to extensive numerical simulations. The critical angular velocity for production of vortices is calculated for both positive and negative scattering lengths a, and find an analytical expression for the large-N limit of the vortex critical angular velocity for a 〉0, and the critical number for condensate population approaches the point of collapse for a 〈 0, by using approximate variational method.     

Calculation of the luminescence of a finite volume with population inversion

Amplified luminescence is examined for a polished cylindrical rod. Nonlinear transport equations are used to examine the distribution of the emission along the rod and the mean density of the amplified luminescence. It is found that the probability of luminescence-induced transitions is of the same order as that for spontaneous transitions for a ruby rod. Calculations are presented for storage in a metastable level and for oscillation. Estimates are presented for the amplified luminescence from a cylinder with nonreflecting surfaces and also for a sphere.I am indebted to B. I. Stepanov for interest and valuable advice.     

Barnett kinetic coefficients in dense charged and neutral media

An approach based on the nonlinear response theory is proposed for determining nonlinear transport properties of nonideal multielement charged and neutral media. A version of this theory developed for describing these properties involves the comparison of phenomenological conservation equations for dense media in the Barnett approximation and microscopic equations for operators of dynamic variables. The Mori algorithm used for formulating the microscopic equations makes it possible to obtain these equations for non-ideal media in the form of generalized nonlinear Langevin equations. As a result, macroscopic expressions are derived for nonlinear kinetic coefficients in the second order in thermal perturbations (of temperature, mass velocity, etc.). The expressions for nonlinear and linearized Barnett kinetic coefficients are compared.     

Exact solution of a coagulation equation with a product kernel in the multicomponent case

In this paper, we obtain the general solution for the continuous Smoluchowski equation in the multicomponent case with a product kernel as a series expansion. The solution of the problem involves the Laplace transform in several dimensions. We obtain a nonlinear partial differential equation (PDE) of the advective kind generalizing the one previously given by other authors for the mono-component case.As in its relative mono-component case, gelation is produced at some point, the conditions for its occurrence being the same as those for the mono-component case, though substituting a sum of derivatives by a derivative in the Laplace transform field. We demonstrate that for a multicomponent particle size distribution (PSD) of multiplicative form, it is sufficient for one of the marginal PSDs to generate instantaneous gelation for the occurrence of instantaneous gelation in the multicomponent PSD.The general solution is applied to several specific cases, a discrete case that recovers a previously known solution, and another two continuous cases which can be used to check numerical methods designed to directly solve the Smoluchowski equation in more general cases.We have compared the solutions for the multicomponent PSD for constant, additive and product kernels and we conjecture about the relation existing between the functional forms for the solutions both in the mono-component and the multicomponent case.Finally, we have analysed the shape of the solutions for multicomponent PSD for constant, additive and product kernels for very small masses of components, obtaining a qualitatively different behaviour for the product kernel. This has effects in the mixing state of the sol phase as time passes.