Effects of the vibronic interaction on anisotropy of ESR parameters for three-coordinate complexes of univalent nickel

Vibronic interaction effects on anisotropy of ESR parameters for three-coordinate complexes of univalent nickel have been investigated. Analytical expressions in the first order of the perturbation theory were obtained for wave functions of the ground and excited doubly degenerate states having taken into account vibronic and spin-orbital interactions. Based on the assumption that the vibronic interaction prevails over spin-orbital, there were obtained the expressions for main components of the g-tensor and isotropic HFS constants with ligand cores which are consistent with experimental data for three-coordinate complexes of the composition [Ni(PPh₃)₃]BF₄ and [Ni(PCy₃)₃]BF₄.     

DFT calculations of EPR parameters in an ionic lattice of [M(CN)4](3-) (M = Ni, Pd, Fe, Ru, Os) complexes

The electronic g-tensor and hyperfine coupling constants were calculated for cyanide coordination complexes [M(CN)4]3- (M = Ni, Pd, Fe, Ru, Os) in KCl or NaCl host lattices through an embedded calculation approach using the Density Functional Theory and compared with previous experiments. For all tested complexes, the B3LYP functional is in good agreement with the experiments for the hyperfine coupling constants. For the electronic g-tensor calculations, performed using the coupled perturbed SCF theory, some discrepancies were found, and the best agreements with the experimental values were achieved by the B3LYP functional.     

Coordination of Lewis acid to eta(2)-enonepalladium(0) leading to continuous structure variation from eta(2)-olefin type to eta(3)-allyl type.

The reaction of alpha,beta-unsaturated carbonyl compounds, a palladium(0) complex, and Lewis acids led to the formation of a new class of complexes showing a wide variety of structures with eta(2)-type and eta(3)-type coordination of the carbonyl compounds. The reaction of Pd(PhCH=CHCOCH(3))(PPh(3))(2) with BF(3).OEt(2) or B(C(6)F(5))(3) quantitatively gave palladium complexes 1a,b having BX(3)-coordinated eta(2)-enonepalladium structure, as revealed by X-ray structure analysis of the B(C(6)F(5))(3) adduct 1b. On the other hand, the reaction of Pd(PhCH=CHCHO)(PPh(3))(2) with BF(3).OEt(2) or B(C(6)F(5))(3) gave distorted zwitterionic eta(3)-allylpalladium complexes 3a,b, where the Pd-carbonyl carbon distance in 3a (2.413(4) A) is much shorter than that (2.96(1) A) in 1b. The values of the P-P coupling constant and (13)C chemical shift for carbonyl carbon are useful criteria for predicting how the eta(3)-coordination mode contributes to the structure of the enone-palladium-Lewis acid system. Molecular orbital calculations on the series of model complexes suggest that orbital overlap in the highest occupied molecular orbital between the palladium and carbonyl carbon is enlarged by coordination of the Lewis acid to the carbonyl group. Palladium-catalyzed conjugate addition of R-M (R-M = AlMe(3), AlEt(3), ZnEt(2)) and its plausible reaction path are also reported.     

Electron attachment to Ni(PF(3))(4) and Pt(PF(3))(4)

An experimental study has been made of thermal electron attachment to the transition-metal trifluorophosphine complexes Ni(PF(3))(4) and Pt(PF(3))(4) using a flowing-afterglow Langmuir-probe apparatus. Both complexes are efficient at electron attachment, although the rate constants are somewhat less than collisional. The rate constant for electron attachment to Ni(PF(3))(4) is 1.9 x 10(-7) cm(3) s(-1) at room temperature, about a factor of 2 less than collisional. The activation energy is 39+/-5 meV for the attachment reaction. The rate constant for electron attachment to Pt(PF(3))(4) is 5.4 x 10(-8) cm(3) s(-1) at room temperature, and the activation energy is 84+/-8 meV. For both complexes, a PF(3) ligand is lost on electron attachment, and only the M(PF(3))(3)(-) ion is observed in the negative-ion mass spectrum. Density functional calculations were carried out on Ni(PF(3))(4) and various fragments in order to describe the thermochemistry of the attachment reaction.     

Excited-state properties of Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF, PPh(3), py)

The photophysical properties of Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF = tetrahydrofuran, PPh(3) = triphenylphosphine, py = pyridine) were explored upon excitation with visible light. Time-resolved absorption shows that all the complexes possess a long-lived transient (3.5-5.0 micros) assigned as an electronic excited state of the molecules, and they exhibit an optical transition at approximately 760 nm whose position is independent of axial ligand. No emission from the Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF, PPh(3), py) systems was detected, but energy transfer from Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) to the (3)pipi excited state of perylene is observed. Electron transfer from Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) to 4,4'-dimethyl viologen (MV(2+)) and chloro-p-benzoquinone (Cl-BQ) takes place with quenching rate constants (k(q)) of 8.0 x 10(6) and 1.2 x 10(6) M(-1) s(-1) in methanol, respectively. A k(q) value of 2 x 10(8) M(-1) s(-1) was measured for the quenching of the excited state of Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) by O(2) in methanol. The observations are consistent with the production of an excited state with excited-state energy, E(00), between 1.34 and 1.77 eV.     

Preparation and reactivity of penta- and tetracoordinate platinum(II) hydride complexes with P(OEt)3 and PPh(OEt)2 phosphite ligands

The pentacoordinate [PtH{P(OEt)3}4]BF4 (1) hydride complex was prepared by allowing the tetrakis(phosphite) Pt{P(OEt)3}4 to react with HBF4.Et2O at -80 degrees C. Depending on the nature of the acid used, however, the protonation of the related Pt{PPh(OEt)2}4 complex yielded the pentacoordinate [PtH{PPh(OEt)2}4]BF4 (3) or the tetracoordinate [PtH{PPh(OEt)2}3]Y (4) [Y = BF4- (a), CF3SO3- (b), Cl- (c)] derivatives. Neutral PtHClP2 (7,8) [P = P(OEt)3, PPh(OEt)2] hydride complexes were prepared by allowing PtCl2P2 to react with NaBH4 in CH3CN. The tetrakis(phosphite)[Pt{P(OEt)3}4](BF4)2 (2) derivative was also synthesised and then characterised spectroscopically and by an X-ray crystal structure determination. Reactivity with aryldiazonium cations of all the hydrides was investigated and found to proceed only with the PtHClP2 complex to yield the aryldiazene [PtCl(ArN=NH)P2]BF4[P = PPh(OEt)2] derivative. The hydrazine [PtCl(NH2NH2){PPh(OEt)2}2]BPh4 complex was also prepared by allowing PtHClP2 to react first with AgCF3SO3 and then with hydrazine.     

Structures and kinetic stabilities of the possible complexes of mononuclear Ni and (N2)x (x = 1-4)

Ab initio and density functional theory (DFT) methods have been applied to study the structures and kinetic stabilities of the possible products of the reactions of mononuclear nickel with (N(2))(x) (x = 1-4). Energy analyses show that end-on bound Ni(N(2))(x) (x = 1-4) complexes are preferred to side-on and N(4) bound ones. Several decomposition and isomerization pathways for Ni(N(2))(x) (x = 2-4) were investigated at the B3LYP/6-31G level of theory. The present study suggests that besides the four experimentally assigned complexes (NiN(2) (C(infinity)(v)), Ni(N(2))(2) (D(infinity)(h)), Ni(N(3))(2) (D(3)(h)), and Ni(N(2))(4) (T(d))), another two complexes (Ni(N(2))(4) (C(2)(v)) and Ni(N(2))(4) (D(4)(d))) are likely to be kinetically stable, while other complexes may be kinetically unstable with barrier heights of less than 30 kcal/mol. The present study also suggests that side-on bound N(2) ligand is ready to transform into the end-on bound one, while N(4) ligand is hard to transform into side-on or end-on bound N(2) ligand.     

Ni(P(Ph)2N(C6H4X)2)2]2+ complexes as electrocatalysts for H2 production: effect of substituents, acids, and water on catalytic rates

A series of mononuclear nickel(II) bis(diphosphine) complexes [Ni(P(Ph)(2)N(C6H4X)(2))(2)](BF(4))(2) (P(Ph)(2)N(C6H4X)(2) = 1,5-di(para-X-phenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane; X = OMe, Me, CH(2)P(O)(OEt)(2), Br, and CF(3)) have been synthesized and characterized. X-ray diffraction studies reveal that [Ni(P(Ph)(2)N(C6H4Me)(2))(2)](BF(4))(2) and [Ni(P(Ph)(2)N(C6H4OMe)(2))(2)](BF(4))(2) are tetracoordinate with distorted square planar geometries. The Ni(II/I) and Ni(I/0) redox couples of each complex are electrochemically reversible in acetonitrile with potentials that are increasingly cathodic as the electron-donating character of X is increased. Each of these complexes is an efficient electrocatalyst for hydrogen production at the potential of the Ni(II/I) couple. The catalytic rates generally increase as the electron-donating character of X is decreased, and this electronic effect results in the favorable but unusual situation of obtaining higher catalytic rates as overpotentials are decreased. Catalytic studies using acids with a range of pK(a) values reveal that turnover frequencies do not correlate with substrate acid pK(a) values but are highly dependent on the acid structure, with this effect being related to substrate size. Addition of water is shown to dramatically increase catalytic rates for all catalysts. With [Ni(P(Ph)(2)N(C6H4CH2P(O)(OEt)2)(2))(2)](BF(4))(2) using [(DMF)H](+)OTf(-) as the acid and with added water, a turnover frequency of 1850 s(-1) was obtained.     

Dinuclear Cu(I) complexes of 1,2,4,5-tetra(7-azaindolyl)benzene: persistent 3-coordinate geometry, luminescence, and reactivity

Five Cu(I) complexes [Cu2(ttab)(CH3CN)2][BF4]2 (1), [Cu(2)(ttab)(PPh3)2][BF4]2 (2), [Cu2(ttab)I2] (3), [Cu2(ttab)(I3)2] (4), and [Cu2(ttab)(I)BF4]n (5) with 1,2,4,5-tetra(7-azaindolyl)benzene (ttab) have been synthesized and characterized. The structures of compound 1, 2, 4, and 5 have been determined by single-crystal X-ray diffraction analyses, which established that 1, 2, and 4 are discrete dinuclear Cu2 compounds while compound 5 is a 1D coordination polymer with the I- ligand bridging two dinuclear Cu2 units. The ttab ligand in all four complexes adopts a 1,3-chelation mode. The Cu(I) center in all complexes is three-coordinate. Close contact between the Cu(I) center and the benzene ring in the ttab ligand was observed in all four structures, which is believed to play a role in stabilizing the three-coordinate geometry of the Cu(I) center. The crystals of 1, 2, and 5 contain channels in the lattice that host solvent molecules such as CH2Cl2 and toluene. Fluorescent measurements established that, in solution, compounds 1-3 display weak blue luminescence which originates from the ttab but is significantly red-shifted and has a much lower emission intensity, compared to the free ttab ligand. The application of compound 1 in C-N cross-coupling reactions was examined by using the reaction of phenyl halides with imidazole as a model system. For the reaction with phenyl iodide, 1 was found to be as effective a catalyst as the CuI/1,10-phenanthroline system. For the reaction with phenyl bromide, 1 is less effective than the CuI/1,10-phenanthroline system. Compound 1 reacts with O2 gas, as established by UV-vis spectra, but the oxidized products have not been characterized.     

Oxidative addition of the imidazolium cation to zerovalent Ni, Pd, and Pt: a combined density functional and experimental study

Oxidative addition of different imidazolium cations to zerovalent group 10 metals, to afford heterocyclic carbene complexes, has been investigated by both density functional theory (DFT) and experimental studies. The theoretical analysis shows that addition of imidazoliums to Pt(0) and Ni(0) is more exothermic than to Pd(0), and Ni(0) is predicted to react with a much lower barrier than either Pt(0) or Pd(0). Strongly basic supporting ligands on the metal, as well as cis-chelating ligands, increase the exothermicity of the reaction and also lower the activation barrier. The addition of 2-H imidazoliums is easier and more exothermic than addition of 2-alkylimidazoliums, and a halo-imidazolium is expected to further lower the barrier to oxidative addition and increase the exothermicity. The DFT results show that all three of the metals should be able to oxidatively add imidazolium cations under appropriate conditions. Experimental studies confirmed that oxidative addition is possible, and a number of Pt- and Pd-carbene complexes were prepared via oxidative addition of imidazolium salts to M(0) precursors. Most significantly, oxidative addition of 2-H azolium salts was found to readily occur, and the reaction of 1,3-dimethylimidazolium tetrafluoroborate with Pt(PPh(3))(2) and Pt(PCy(3))(2) affords [PtH(dmiy)(PPh(3))(2)]BF(4) (10) and [PtH(dmiy)(PCy(3))(2)]BF(4) (11), while reaction between 3,4-dimethylthiazolium tetrafluoroborate and Pt(PCy(3))(2) yields [PtH(dmty)(PCy(3))(2)]BF(4) (12) (dmiy = 1,3-dimethylimidazolin-2-ylidene, dmty = 3,4-dimethylthiazolin-2-ylidene). Addition of 2-iodo-1,3,4,5-tetramethylimidazolium tetrafluoroborate to Pt(PPh(3))(4) or Pd(dcype)(dba) yields [PtI(tmiy)(PPh(3))(2)]BF(4) (9) and [PdI(tmiy)(dcype)]BF(4) (14), respectively (tmiy = 1,3,4,5-tetramethylimidazolin-2-ylidene, dcype = 1,3-bis(dicyclohexylphosphino)ethane)). X-ray crystal structures are reported for complexes 9 and 11 (cis and trans). These studies clearly show for the first time that oxidative addition of imidazolium and thiazolium cations is possible, and the results are discussed in terms of the ramifications for catalysis in imidazolium-based ionic liquids with both carbene-based and non-carbene-based complexes.     

Ruthenium tris(pyrazolyl)borate diazo complexes: preparation of aryldiazenido, aryldiazene, and hydrazine derivatives

Tris(pyrazolyl)borate aryldiazenido complexes [RuTpLL'(ArN(2))](BF(4))(2) (1-3) [Ar = C(6)H(5), 4-CH(3)C(6)H(4); Tp = hydridotris(pyrazolyl)borate; L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were prepared by allowing dihydrogen [RuTp(eta(2)-H(2))LL'](+) derivatives to react with aryldiazonium cations. Spectroscopic characterization (IR, (15)N NMR) using the (15)N-labeled derivatives strongly supports the presence of a linear [Ru]-NN-Ar aryldiazenido group. Hydrazine complexes [RuTp(RNHNH(2))LL']BPh(4) (4-6) [R = H, CH(3), C(6)H(5), 4-NO(2)C(6)H(4); L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were also prepared by reacting the [RuTp(eta(2)-H(2))LL'](+) cation with an excess of hydrazine. The complexes were characterized spectroscopically (IR and NMR) and by X-ray crystal structure determination of the [RuTp(CH(3)NHNH(2))[P(OEt)(3)](PPh(3))]BPh(4) (4d) derivative. Tris(pyrazolyl)borate aryldiazene complexes [RuTp(ArN=NH)LL']BPh(4) (7-9) (Ar = C(6)H(5), 4-CH(3)C(6)H(4)) were prepared following three different methods: (i). by allowing hydride species RuHTpLL' to react with aryldiazonium cations in CH(2)Cl(2); (ii). by treating aryldiazenido [RuTpLL'(ArN(2))](BF(4))(2) with LiBHEt(3) in CH(2)Cl(2); (iii). by oxidizing arylhydrazine [RuTp(ArNHNH(2))LL']BPh(4) complexes with Pb(OAc)(4) in CH(2)Cl(2) at -30 degrees C. Methyldiazene complexes [RuTp(CH(3)N=NH)LL']BPh(4) were also prepared by the oxidation of the corresponding methylhydrazine [RuTp(CH(3)NHNH(2))LL']BPh(4) with Pb(OAc)(4).     

Trans --> cis isomerization of trans-[(dppm)2Ru(H)(L)][BF4] (L = P(OR)3) complexes: preparation of cis-[(dppm)2Ru(eta2-H2)(L)][BF4]2

A series of new dicationic dihydrogen complexes of ruthenium of the type cis-[(dppm)(2)Ru(eta(2)-H(2))(L)][BF(4)](2) (dppm = Ph(2)PCH(2)PPh(2); L = P(OMe)(3), P(OEt)(3), PF(O(i)Pr)(2)) have been prepared by protonating the precursor hydride complexes cis-[(dppm)(2)Ru(H)(L)][BF(4)] (L = P(OMe)(3), P(OEt)(3), P(O(i)Pr)(3)) using HBF(4).Et(2)O. The cis-[(dppm)(2)Ru(H)(L)][BF(4)] complexes were obtained from the trans hydrides via an isomerization reaction that is acid-accelerated. This isomerization reaction gives mixtures of cis and trans hydride complexes, the ratios of which depend on the cone angles of the phosphite ligands: the greater the cone angle, the greater is the amount of the cis isomer. The eta(2)-H(2) ligand in the dihydrogen complexes is labile, and the loss of H(2) was found to be reversible. The protonation reactions of the starting hydrides with trans PMe(3) or PMe(2)Ph yield mixtures of the cis and the trans hydride complexes; further addition of the acid, however, give trans-[(dppm)(2)Ru(BF(4))Cl]. The roles of the bite angles of the dppm ligand as well as the steric and the electronic properties of the monodentate phosphorus ligands in this series of complexes are discussed. X-ray crystal structures of trans-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], cis-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], and cis-[(dppm)(2)Ru(H)(P(O(i)Pr)(3))][BF(4)] complexes have been determined.     

1H,1H,2H,2H-perfluoroalkyl-functionalization of Ni(II), Pd(II), and Pt(II) mono- and diphosphine complexes: minimizing the electronic consequences for the metal center

A series of fluorous derivatives of group 10 complexes MCl(2)(dppe) and [M(dppe)(2)](BF(4))(2) (M = Ni, Pd or Pt; dppe = 1,2-bis(diphenylphosphino)ethane) and cis-PtCl(2)(PPh(3))(2) was synthesized. The influence of para-(1H,1H,2H,2H-perfluoroalkyl)dimethylsilyl-functionalization of the phosphine phenyl groups of these complexes, as studied by NMR spectroscopy, cyclovoltammetry (CV), XPS analyses, as well as DFT calculations, points to a weak steric and no significant inductive electronic effect. The steric effect is most pronounced for M = Ni and leads in the case of NiCl(2)(1c) (3c) and [Ni(1c)(2)](BF(4))(2) (7c) (1c = [CH(2)P[C(6)H(4)(SiMe(2)CH(2)CH(2)C(6)F(13))-4](2)](2)) to a tetrahedral distortion from the expected square planar geometry. The solubility behavior of NiCl(2)[CH(2)P[C(6)H(4)(SiMe(3-b)(CH(2)CH(2)C(x)F(2x+1)b)-4](2)](2) (3: b = 1-3; x = 6, 8) in THF, toluene, and c-C(6)F(11)CF(3) was found to follow the same trends as those observed for the free fluorous ligands 1. A similar correlation between the partition coefficient (P) of complexes 3 and free 1 was observed in fluorous biphasic solvent systems, with a maximum value obtained for 3f (b = 3, x = 6, P = 23 in favor of the fluorous phase).     

Ni, Pd, Pt, and Ru complexes of phosphine-borate ligands

The species Cy(2)PHC(6)F(4)BF(C(6)F(5))(2) reacts with Pt(PPh(3))(4) to yield the new product cis-(PPh(3))(2)PtH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 1 via oxidative addition of the P-H bond of the phosphonium borate to Pt(0). The corresponding reaction with Pd(PPh(3))(4) affords the Pd analogue of 1, namely, cis-(PPh(3))(2)PdH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 3; while modification of the phosphonium borate gave the salt [(PPh(3))(3)PtH][(tBu(2)PC(6)F(4)BF(C(6)F(5))(2))] 2. Alternatively initial deprotonation of the phosphonium borate gave [tBu(3)PH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 4, [SIMesH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 5 which reacted with NiCl(2)(DME) yielding [BaseH](2)[trans-Cl(2)Ni(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 6, SIMes 7) or with PdCl(2)(PhCN)(2) to give [BaseH](2)[trans-Cl(2)Pd(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 8, SIMes 9). While [C(10)H(6)N(2)(Me)(4)H][tBu(2)PC(6)F(4)BF(C(6)F(5))(2)] 10 was also prepared. A third strategy for formation of a metal complex of anionic phosphine-borate derivatives was demonstrated in the reaction of (COD)PtMe(2) with the neutral phosphine-borane Mes(2)PC(6)F(4)B(C(6)F(5))(2) affording (COD)PtMe(Mes(2)PC(6)F(4)BMe(C(6)F(5))(2)) 11. Extension of this reactivity to tBu(2)PH(CH(2))(4)OB(C(6)F(5))(3)) was demonstrated in the reaction with Pt(PPh(3))(4) which yielded cis-(PPh(3))(2)PtH(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)) 12, while the reaction of [SIMesH][tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)] 13 with NiCl(2)(DME) and PdCl(2)(PhCN)(2) afforded the complexes [SIMesH](2)[trans-Cl(2)Ni(tBu(2)PC(4)H(8)OB(C(6)F(5))(3))(2)] 14 and [SIMesH](2)[trans-PdCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))(2)] 15, respectively, analogous to those prepared with 4 and 5. Finally, the reaction of 7 and 13with [(p-cymene)RuCl(2)](2) proceeds to give the new orange products [SIMesH][(p-cymene)RuCl(2)(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))] 16 and [SIMesH][(p-cymene)RuCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))] 17, respectively. Crystal structures of 1, 6, 10, 11, 12, and 16 are reported.     

Effect of substitution and planarity of the ligand on DNA/BSA interaction, free radical scavenging and cytotoxicity of diamagnetic Ni(II) complexes: a systematic investigation

Four new bivalent nickel hydrazone complexes have been synthesised from the reactions of [NiCl(2)(PPh(3))(2)] with H(2)L {L = dianion of the hydrazones derived from the condensation of salicylaldehyde or o-hydroxy acetophenone with p-toluic acid hydrazide (H(2)L(1)) (1), (H(2)L(2)) (2) and o-hydroxy acetophenone or o-hydroxy naphthaldehyde with benzhydrazide (H(2)L(3)) (3) and (H(2)L(4)) (4)} and formulated as [Ni(L(1))(PPh(3))] (5), [Ni(L(2))(PPh(3))] (6), [Ni(L(3))(PPh(3))] (7) and [Ni(L(4))(PPh(3))] (8). Structural characterization of complexes 5-8 were accomplished by using various physico-chemical techniques. In order to study the influence of substitution in the ligand and its planarity on the biological activity of complexes 5-8 containing them, suitable hydrazone ligands 1-4 have been selected in this study. Single crystal diffraction data of complexes 5, 7 and 8 proved the geometry of the complexes to be distorted square planar with a 1 : 1 ratio between the metal ion and the coordinated hydrazones. To provide more insight on the mode of action of complexes 5-8 under biological conditions, additional experiments involving their interaction with calf thymus DNA (CT DNA) and bovine serum albumin (BSA) were monitored by UV-visible and fluorescence titrations respectively. Further, the ligands 1-4 and corresponding nickel(ii) chelates 5-8 have been tested for their scavenging effect towards OH and O(2)(-) radicals. The effect of complexes 5-8 to arrest the growth of HeLa and Hep-2 tumour cell lines has been studied along with the cell viability against the non-cancerous NIH 3T3 cells under in vitro conditions.     

Azametallacycles from Ag(I)- or Cu(II)-promoted coupling reactions of dialkylcyanamides with oximes at Pt(II)

The dialkylcyanamide complexes cis-[PtCl(NCNR(2))(PPh(3))(2)][BF(4)] 1 and cis-[Pt(NCNR(2))(2)(PPh(3))(2)][BF(4)](2) 2 (R = Me or Et) have been prepared by treatment of a CH(2)Cl(2) solution of cis-[PtCl(2)(PPh(3))(2)] with the appropriate dialkylcyanamide and one or two equivalents of Ag[BF(4)], respectively. Compounds 2 can also be obtained from 1 by a similar procedure. Their reaction with oximes, HON=CR'R' ' (R'R' ' = Me(2) or C(4)H(8)), in CH(2)Cl(2) and in the presence of Ag[BF(4)] or Cu(CH(3)COO)(2), leads to the novel type of azametallacycles cis-[Pt(NH=C(ON=CR'R")-NR2)(PPh3)2][BF4]2 4 upon an unprecedented coupling of the organocyanamides with oximes, in a process that proceeds via the mixed oxime-organocyanamide species cis-[Pt(NCNR(2))(HON=CR'R' ')(PPh(3))(2)][BF(4)](2) 3, and is catalyzed by either Ag(+) or Cu(2+) which activate the ligating organocyanamide by Lewis acid addition to the amide group. In contrast, in the organonitrile complexes cis-[Pt(NCR)(2)(PPh(3))(2)][BF(4)](2) 5 (R = C(6)H(4)OMe-4 or Et), obtained in a similar way as 2 (but by using NCR instead of the cyanamide), the ligating NCR is not activated by the Lewis acid and does not couple with the oximes. The spectroscopic properties of those complexes are reported along with the molecular structures of 2b (R = Et), 4a1 (R = Me, R'R' ' = Me(2)), and 4b1 (R = Et, R'R' ' = Me(2)), as established by X-ray crystallography which indicates that in the former complex the amide-N-atoms are trigonal planar, whereas in the latter (4a1 and 4b1) the five-membered rings are planar with a localized N=C double bond (imine group derived from the cyanamide) and the exocyclic amide and alkylidene groups (in 4b1) are involved in two intramolecular H-bonds to the oxygen atom of the ring.     

Phosphine and phosphonite complexes of a ruthenium(II) porphyrin. 1. Synthesis,structure, and solution state studies

We have investigated the effect of complexation of different phosphorus ligands on the stability, solid state structure, and spectroscopic properties (NMR, IR, UV-vis) of a 5,15-diphenyl-substituted ruthenium porphyrin, (MeOH)Ru(II)(CO)(DPP) 2 [DPP = 5,15-bis(3',5'-di-tert-butyl)phenyl-2,8,12,18-tetraethyl-3,7,13,17-tetramethylporphyrin]. The ligands used are PPh(3), diphenyl(phenylacetenyl)phosphine (DPAP), bis(diphenylphosphino)acetylene (DPPA), tris(phenylacetenyl)phosphine [(PA)(3)P], and diethyl (phenylacetenyl)phosphonite [PAP(OEt)(2)]. The mono-phosphine complexes (PR(3))Ru(II)(CO)(DPP) are readily formed in solution in quantitative yields. The complexes display association constants ranging from 1.2 x 10(4) M(-1) for PPh(3) to 4.8 x 10(6) M(-1) for PAP(OEt)(2). The weak association of PPh(3) does not correlate with its pK(a), delta((31)P), or cone angle value and is attributed to steric effects. Due to their kinetic lability, which is shown by 2D NMR spectroscopy, and the weakening of the carbonyl ligand via a trans effect, the mono-phosphine complexes could not be isolated. IR spectroscopy gives the relative order of pi-acceptor strength as PPh(3) < DPAP, DPPA < (PA)(3)P < PAP(OEt)(2), whereas the relative order of the sigma-donor strength is PPh(3) < (PA)(3)P < DPAP, DPPA < PAP(OEt)(2), based on the calculated pK(a) values and on the (31)P((1)H) NMR chemical shifts of the ligands. The chemical shift differences in the (31)P9(1)H)) NMR spectra upon ligand binding display a linear correlation with the calculated pK(a) values of the protonated ligands HPR(3)(+); we propose that the pK(a), and probably other electronic properties, of a specific phosphorus ligand can be estimated on the basis of the chemical shift difference Deltadelta((31)P) upon complexation to a metalloporphyrin. The bis-phosphine complexes can be isolated in pure form by crystallization from CHCl(3)-MeOH solutions using excess ligand. Association of the second ligand is in the same order of magnitude as the first binding for the phosphines, but the second phosphonite binding is decreased by a factor of about 100. The solid state structures show only marginal differences in the geometrical parameters. The calculated and the crystallographic cone angles of the ligands generally do not match, apart from the values obtained for PAP(OEt)(2).     

Syntheses and structural analyses of variable-stoichiometric Au-Pt-Ni carbonyl/phosphine clusters, Pt3(Pt(1-x)Ni(x))(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 and Pt2(Pt(2-y)Ni(y))(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2, with ligation-induced site-specific Pt/Ni substitutional disorder within butterfly-based Pt3(Pt(1-x)Ni(x))Au2 and Pt2(Pt(2-y)Ni(y))Au2 core-geometries

In ongoing attempts of directed synthesis of high-nuclearity Au-Pt carbonyl/phosphine clusters with [Ni6(CO)12]2- used as reducing agent and CO source, we have isolated and characterized two new closely related variable-stoichiometric trimetallic clusters, Pt3(Pt(1-x)Ni(x))(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 (1) and Pt2(Pt(2-y)Ni(y))(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2). Their M4Au2 cores may be envisioned as substitutional disordered butterfly-based M4Au2 frameworks (M = Pt/Ni) formed by connections of the two basal M(B) atoms with both (Au-Au)-linked Au(PPh3) moieties. Based upon low-temperature CCD X-ray diffraction studies of eight crystals obtained from different samples, ligation-induced site-specific Pt/Ni substitutional disorder (involving formal insertion of Ni in place of Pt) in a given crystal was found to occur only at the one OC-attached basal M(B) site in 1 or at both OC-attached basal M(B) sites in 2 corresponding to a crystal composite of the Pt3(Pt(1-x)Ni(x))Au2 core in 1 or of the Pt2(Pt(2-y)Ni(y))Au2 core in 2; the Ph3P-attached M(B) site (M(B) = Pt) in 1 and two wingtip M(w) sites (M(w) = Pt) in 1 and 2 were not substitutionally disordered. The resulting variable stoichiometry of the M4Au2 core in 1 may be viewed as a crystal composite of two superimposed individual stereoisomers, Pt4(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 (1a) and Pt3Ni(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 (1b), in the averaged unit cell of a given crystal. Likewise, 2 represents the crystal-averaged composite of three individual stereoisomers, Pt4(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2a), Pt3Ni(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2b), and Pt2Ni2(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2c). Formal Ni substitution for Pt at only the basal M(B) site(s) in the four crystal composites each of 1 and 2 was found to vary widely from 17% to 79% Ni in 1 and from 21% to 95% Ni in 2. Nevertheless, reasonably close Pt/Ni occupancy factors were found within each of the four pairs of composite crystals selected from samples obtained from duplicate syntheses. Both 1 and 2 may be formally derived from the electronically equivalent classic butterfly Pt4(mu2-CO)5(PPh3)4 cluster by replacement of its bridging mu2-CO ligand spanning the basal M(B)-M(B) edge with two one-electron donating (Au-Au)-linked AuPPh3 moieties along with the substitution of a terminal CO in place of one or both M(B)-attached PPh3 ligands in 1 and 2, respectively; site-specific Pt/Ni substitutional disorder occurs only at the CO-attached M(B) sites. The variable-stoichiometric 1 and 2 re also electronically equivalent and geometrically related to the crystal-ordered butterfly-based Pt4(mu2-CO)4(PR3)4(mu3-HgX)2 clusters (R3 = Ph3, MePh2; X = CF3, Br, I).     

Preparations, structures, and electrochemical studies of aryldiazene complexes of rhenium: syntheses of the first heterobinuclear and heterotrinuclear derivatives with bis(diazene) or bis(diazenido) bridging ligands

The mono- and binuclear aryldiazene complexes [Re(C6H5N=NH)(CO)5-nPn]BY4 (1-5) and [(Re(CO)5-nPn)2-(mu-HN=NAr-ArN=NH)](BY4)2 (6-12) [P = P(OEt)3, PPh(OEt)2, PPh2OEt; n = 1-4; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-(2-CH3)C6H3-C6H3(2-CH3), 4,4'-C6H4-CH2-C6H4; Y = F, Ph) were prepared by reacting the hydride species ReH(CO)5-nPn with the appropriate mono- and bis(aryldiazonium) cations. These compounds, as well as other prepared compounds, were characterized spectroscopically (IR; 1H, 31P, 13C, and 15N NMR data), and 1a was also characterized by an X-ray crystal structure determination. [Re(C6H5N=NH)(CO)(P(OEt)3)4]BPh4 (1a) crystallizes in space group P1 with a = 15.380(5) A, b = 13.037(5) A, c = 16.649(5) A, alpha = 90.33(5) degrees, beta = 91.2(1) degrees, gamma = 89.71(9) degrees, and Z = 2. The "diazene-diazonium" complexes [M(CO)3P2(HN=NAr-ArN identical to N)](BF4)2 (13-15, 17) [M = Re, Mn; P = PPh2OEt, PPh2OMe, PPh3; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4] and [Re(CO)4(PPh2OEt)(4,4'-HN=NC6H4-C6H4N identical to N)](BF4)2 (16b) were synthesized by allowing the hydrides MH(CO)3P2 or ReH(CO)4P to react with equimolar amounts of bis(aryldiazonium) cations under appropriate conditions. Reactions of diazene-diazonium complexes 13-17 with the metal hydrides M2H2P'4 and M2'H(CO)5-nP"n afforded the heterobinuclear bis(aryldiazene) derivatives [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2HP'4](BPh4)2 (ReFe, ReRu, ReOs, MnRu, MnOs) and [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2'(CO)5-nP"n](BPh4)2 (ReMn, MnRe) [M1 = Re, Mn; M2 = Fe, Ru, Os; M2' = Mn, Re; P = PPh2OEt, PPh2OMe; P',P" = P(OEt)3, PPh(OEt)2; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4; n = 1, 2]. The heterotrinuclear complexes [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)M(P(OEt)3)4(mu-4,4'-HN=NC6H4- C6H4N=NH)Mn(CO)3(PPh2OEt)2](BPh4)4 (M = Ru, Os) (ReRuMn, ReOsMn) were obtained by reacting the heterobinuclear complexes ReRu and ReOs with the appropriate diazene-diazonium cations. The heterobinuclear complex with a bis(aryldiazenido) bridging ligand [Mn(CO)2(PPh2OEt)2(mu-4,4'-N2C6H4-C6H4N2)Fe(P(OEt)3)4]BPh4 (MnFe) was prepared by deprotonating the bis(aryldiazene) compound [Mn(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)Fe(4- CH3C6H4CN)(P(OEt)3)4](BPh4)3. Finally, the binuclear compound [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N2)Fe(CO)2(P(OPh)3)2](BPh4)2 (ReFe) containing a diazene-diazenido bridging ligand was prepared by reacting [Re(CO)3(PPh2OEt)2(4,4'-HN=NC6H4-C6H4N identical to N)]+ with the FeH2(CO)2(P(OPh)3)2 hydride derivative. The electrochemical reduction of mono- and binuclear aryldiazene complexes of both rhenium (1-12) and the manganese, as well as heterobinuclear ReRu and MnRu complexes, was studied by means of cyclic voltammetry and digital simulation techniques. The electrochemical oxidation of the mono- and binuclear aryldiazenido compounds Mn(C6H5N2)(CO)2P2 and (Mn(CO)2P2)2(mu-4,4'-N2C6H4-C6H4N2) (P = PPh2OEt) was also examined. Electrochemical data show that, for binuclear compounds, the diazene bridging unit allows delocalization of electrons between the two different redox centers of the same molecule, whereas the two metal centers behave independently in the presence of the diazenido bridging unit.