Surfactant aggregation within room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

On the basis of the response of solvatochromic probes [Reichardt's betaine dye, pyrene, and 1,3-bis(1-pyrenyl)propane], we have investigated the aggregation behavior of common anionic, cationic, and nonionic surfactants when solubilized within a low-viscosity room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (emimTf2N). We observed possible aggregate formation by all nonionic surfactants included in the study (Brij-35, Brij-700, Tween-20, and Triton X-100), while no aggregation was observed for the cationic surfactant cetyltrimethylammonium bromide. The anionic surfactant sodium dodecyl sulfate does not appear to solubilize within emimTf2N at ambient conditions.     

Low-temperature heat capacity of room-temperature ionic liquid, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

Heat capacities of liquid, stable crystal, and liquid-quenched glass of a room-temperature ionic liquid (RTIL), 1-hexyl-3-methylimidazolium bis(trifluromethylsulfonyl)imide were measured between 5 and 310 K by adiabatic calorimetry. Heat capacity of the liquid at 298.15 K was determined for an IUPAC project as (631.6 +/- 0.5) J K(-1) mol(-1). Fusion was observed at T(fus) = 272.10 K for the stable crystalline phase, with enthalpy and entropy of fusion of 28.34 kJ mol(-1) and 104.2 J K(-1) mol(-1), respectively. The purity of the sample was estimated as 99.83 mol % by the fractional melting method. The liquid could be supercooled easily and the glass transition was observed around T(g) approximately 183 K, which was in agreement with the empirical relation, T(g) approximately ((2)/(3)) T(fus). The heat capacity of the liquid-quenched glass was larger than that of the crystal as a whole. In the lowest temperature region, however, the difference between the two showed a maximum around 6 K and a minimum around 15 K, at which the heat capacity of the glass was a little smaller than that of crystal.     

Anion conformation of low-viscosity room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(fluorosulfonyl) imide

Anion conformation of a low-viscosity room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(fluorosulfonyl) imide (EMI+FSI-) has been studied by Raman spectra and theoretical DFT calculations. Three strong Raman bands were found at 293, 328, and 360 cm(-1), which are ascribed to the FSI- ion. These Raman bands show significant temperature dependence, implying that two FSI- conformers coexist in equilibrium. This is supported by theoretical calculations that the FSI- ion is present as either C2 (trans) or C1 (cis) conformer; the former gives the global minimum, and the latter has a higher SCF energy of about 4 kJ mol(-1). Full geometry optimizations followed by normal frequency analyses show that the observed bands at 293, 328, and 360 cm(-1) are ascribed to the C2 conformer. The corresponding vibrations at 305, 320, and 353 cm(-1) were extracted according to deconvolution of the observed Raman bands in the range280-400 cm(-1 )and are ascribed to the C1 conformer. The enthalpy DeltaH degrees of conformational change from C2 to C1 was experimentally evaluated to be ca. 4.5 kJ mol(-1), which is in good agreement with the predicted value by theoretical calculations. The bis(trifluoromethanesulfonyl) imide anion (TFSI-) shows a conformational equilibrium between C1 and C2 analogues (DeltaH degrees = 3.5 kJ mol(-1)). However, the profile of the potential energy surface of the conformational change for FSI- (the F-S-N-S dihedral angle) is significantly different from that for TFSI- (the C-S-N-S dihedral angle).     

Physicochemical properties, structure, and conformations of 1-Butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C4mim]NTf2 ionic liquid

Thermodynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim]NTf2) ionic liquid have been studied by adiabatic calorimetry in the temperature range of 5 to 370 K. This compound has been found to form crystal, liquid, and glass. The temperature and enthalpy of fusion for [C(4)mim]NTf(2) have been determined to be T(fus) = 270.22 +/- 0.02 K and Delta(fus)H = 23.78 +/- 0.04 kJ.mol(-1), respectively. The heat capacity of crystalline [C(4)mim]NTf(2) in the T range of 205 to 255 K may vary by a few percent, subject to the procedure of the crystal preparation. The glass transition temperature for [C(4)mim]NTf(2) has been found to be T(g) = 181.5 +/- 0.1 K. On the basis of the results of DFT quantum chemical calculations, the experimental vibrational spectra, and the available literature data, thermodynamic properties of [C(4)mim]NTf(2) in the ideal-gas state have been calculated by the statistical thermodynamic methods. The entropy values for the gaseous compound obtained from the experimental data and the calculations are in satisfactory agreement.     

A molecular dynamics investigation of the structural and dynamic properties of the ionic liquid 1-n-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide

Molecular dynamics simulations have been performed to investigate the structure and dynamics of the ionic liquid, 1-n-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C(4)mim][Tf(2)N]) in the temperature range of 283-460 K. Extensive analysis was carried out to characterize a number of structural and dynamic features. Transport properties were computed using a variety of equilibrium methods that employed the Green-Kubo and Einstein formulations. Nonequilibrium techniques were also used. In general, different methods mostly yielded consistent results, although some differences were observed. Computed self-diffusivities and ionic conductivities tended to be slightly lower than experimental values, while computed viscosities were significantly higher than experiment. Computed thermal conductivities agreed reasonably well with experimental data. Despite these discrepancies, the simulations capture the experimental temperature-dependent trends for all these transport properties. Single ion dynamics were studied by examining diffusional anisotropy, the self-part of the van Hove function, non-Gaussian parameters, and incoherent intermediate scattering functions. It is found that cations diffuse faster than anions and are more dynamically heterogeneous. A clear anisotropy is revealed in cation displacement, with the motion normal to the imidazolium ring plane being the most hindered and the motion along the alkyl chain in the plane of the ring being the most facile. Cations structurally relax faster than anions but they rotationally relax slower than anions. There is a pronounced temperature dependence to the rotational anisotropy of the cations, but only a weak temperature dependence for the anions. The ionic conductivity deviates from the Nernst-Einstein relation due to the correlated motion of cations and anions. The results suggest that the dynamical behavior of this and related ionic liquids is extremely complex and consists of many different modes with widely varying timescales, making the prediction of dynamical trends extremely difficult.     

Effect of ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide on the properties of poly(glycidyl methacrylate) based solid polymer electrolytes

A free standing polymer electrolytes films, containing poly(glycidyl methacrylate) (PGMA) as the polymer host, lithium perchlorate (LiClO₄), and ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [Bmim][TFSI] as a plasticizer was successfully prepared via the solution casting method. The XRD analysis revealed the amorphous nature of the electrolyte. ATR-FTIR and thermal studies confirmed the interaction and complexation between the polymer host and the ionic liquid. The maximum ionic conductivity of the solid polymer electrolyte was found at 2.56 × 10^–5 S cm^–1 by the addition of 60 wt % [Bmim][TFSI] at room temperature and increased up to 3.19 × 10^–4 S cm^–1 at 373 K, as well as exhibited a transition of temperature dependence of conductivity: Arrhenius-like behavior at low and high temperatures.     

Selective separation of uranium,zirconium and iodine from various fission products by 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide and phosphoramide-functionalized ionic liquid

In this work, a separation and purification process of U(VI), Zr(IV) and I₂ from various fission products in nitric acid solution by 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₄mim][NTf₂]) and dibutyl-3-(3-methylimidazolium)propylphosphoramide bis(trifluoromethanesulfonyl)imide-task specific ionic liquid (phosphoramide-TSIL) was investigated. The phosphoramide-TSIL was found to reduce ligand loss compared to dibutyl propylphosphoramidate by total organic carbon testing (TOC). The stripping of U(VI), Zr(IV) and I₂ could be achieved by guanidine carbonate solution, oxalic acid solution and sodium hydroxide solution, respectively. The phosphoramide-TSIL/[C₄mim][NTf₂] showed good irradiation stability and recyclability. Phosphoramide-TSIL has the potential to be applied for separation and purification in the actual radioactive environment.

Graphical abstract

     

Ion-Pair Formation of the Ionic Liquid 1-Ethyl-3-methylimidazolium bis(trifyl)imide in Low Dielectric Media

A proton nuclear magnetic resonance (¹H NMR) study of the ionic liquid, 1-ethyl-3-methylimidazolium bis(trifyl)imide, dilute in low dielectric constant solvent media is presented. Equilibrium species are directly observed in the ¹H NMR spectrum as two sets of resonance features, thus displaying unusually long lifetimes. In mixed solvent systems the species mole fractions are directly proportional to the bulk dielectric constant of the solution. The two sets of resonance features are assigned to the freely dissolved ions and ion-pair aggregates. The assignment is supported by measured spin lattice relaxation rates, and the observed temperature and concentration dependencies of the equilibrium. The thermodynamic quantities G _m , S _m , and H _m are also evaluated from the temperature-dependent data.     

Solubility of carbon dioxide in the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

In this work, the phase behaviour of the binary system of carbon dioxide and the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf₂N]) has been studied experimentally. The equipment used for the experiments is the Cailletet set-up, based on visual observations of phase transitions of systems with constant overall composition. Results are reported for carbon dioxide concentrations ranging from 12.3 to 59.3 mol%, and within temperature and pressure ranges of 310–450 K and 0–15 MPa, respectively. The data reveal an extremely high capacity of the selected ionic liquid for dissolving CO₂ gas, for example, reaching up to about 60 mol% within the above-mentioned pressure and temperature range. Also, the solubility of CO₂ in the ionic liquid [emim][Tf₂N] is compared to the solubility of CO₂ in the ionic liquid [emim][PF₆], an ionic liquid that shares the same cation.     

Conformational equilibrium of bis(trifluoromethanesulfonyl) imide anion of a room-temperature ionic liquid: Raman spectroscopic study and DFT calculations

The structure of bis(trifluoromethanesulfonyl) imide (TFSI-) in the liquid state has been studied by means of Raman spectroscopy and DFT calculations. Raman spectra of 1-ethyl-3-methylimidazolium (EMI+) TFSI- show relatively strong bands arising from TFSI- at about 398 and 407 cm(-1). Interestingly, the 407 cm(-1) band, relative to the 398 cm(-1) one, is appreciably intensified with raising temperature, suggesting that an equilibrium is established between TFSI- conformers in the liquid state. According to DFT calculations followed by normal frequency analyses, two conformers of C2 and C1 symmetry, respectively, constitute global and local minima, with an energy difference 2.2-3.3 kJ mol(-1). The wagging omega-SO2 vibration appears at 396 and 430 cm(-1) for the C1 conformer and at 387 and 402 cm(-1) for the C2 one. Observed Raman spectra over the range 380-440 cm(-1) were deconvoluted to extract intrinsic bands of TFSI- conformers, and the enthalpy of conformational change from C2 to C1 was evaluated. The enthalpy value is in good agreement with that obtained by theoretical calculations. We thus conclude that a conformational equilibrium is established between the C1 and C2 conformers of TFSI- in the liquid EMI+TFSI-, and the C2 conformer is more favorable than the C1 one.     

Effect of temperature and water content on the shear viscosity of the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide as studied by atomistic simulations

Atomistic simulations are conducted to examine the dependence of the viscosity of 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide on temperature and water content. A nonequilibrium molecular dynamics procedure is utilized along with an established fixed charge force field. It is found that the simulations quantitatively capture the temperature dependence of the viscosity as well as the drop in viscosity that occurs with increasing water content. Using mixture viscosity models, we show that the relative drop in viscosity with water content is actually less than that that would be predicted for an ideal system. This finding is at odds with the popular notion that small amounts of water cause an unusually large drop in the viscosity of ionic liquids. The simulations suggest that, due to preferential association of water with anions and the formation of water clusters, the excess molar volume is negative. This means that dissolved water is actually less effective at lowering the viscosity of these mixtures when compared to a solute obeying ideal mixing behavior. The use of a nonequilibrium simulation technique enables diffusive behavior to be observed on the time scale of the simulations, and standard equilibrium molecular dynamics resulted in sub-diffusive behavior even over 2 ns of simulation time.     

Cathodic chloride extraction treatment of a late bronze-age artifact affected by bronze disease in room-temperature ionic-liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMI-TFSI)

This paper concentrates on a novel approach to the electrochemical treatment of bronze disease, based on the use of room-temperature ionic liquids (RTIL). In particular, we employed 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide as the electrolyte for the galvanostatic cathodic treatment of a late bronze-age artifact that had been exposed to marine environment during its history, dating back to ca. 1100 B.C. After an accurate metallographic and structural analysis of the as-found object—proving, among other findings, that bronze disease is essentially related to the presence of nantokite locked inside subsurface pits of typical equivalent diameter of several hundred micrometers, we subjected it to optimal electrochemical conditions, showing—on the basis of X-ray diffraction—that nantokite could be effectively removed and Cu(I) reduced to metallic Cu. Numerical computations in the full three-dimensional pit geometry, with realistic nonlinear electrochemical boundary conditions, provide the theoretical framework for the choice of RTIL—as opposed to aqueous solutions—and for the quantitative evaluation of Cl⁻ removal rates.     

“一锅法”合成离子液体1-乙基-3-甲基咪唑醋酸盐

以1-甲基咪唑,溴乙烷和乙酸铅为原料,采用"一锅法"合成了离子液体1-乙基-3-甲基咪唑醋酸盐,产率87%,其结构经UV,IR和元素分析确证。优化反应条件为:1-甲基咪唑100 mmol,n(溴乙烷):n(1-甲基咪唑):n(乙酸铅)=3.6:2.0:1.0,于60℃反应20 h。     

Formation of 1-Butyl-3-methylimidazolium Bis(2-ethyl-1-hexyl)sulfosuccinate Stabilized Water-in-1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide Microemulsion and the Effects of Additives

A new strategy is proposed here to formulate a bis(2-ethyl-1-hexyl)sulfosuccinate (AOT^?) stabilized water-in-ionic liquid microemulsion without any additives. Replacing the inorganic counter ion Na⁺ by the organic 1-butyl-3-methylimidazolium ([Bmim]⁺) ion greatly improves the solubility of AOT^? in hydrophobic 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Bmim]Tf₂N) (IL) and favors the formation of water-in-IL (W/IL) microdroplets. The existence of the W/IL microdroplets has been confirmed by dynamic light scattering, Fourier transform infrared absorption spectroscopy and ultraviolet–visible absorption spectroscopy. Also, presented for the first time are the effects of salts and alcohols on the microstructure and water solubilization capacity of the ternary H₂O/[Bmim]AOT/[Bmim]Tf₂N system. For inorganic salts, larger concentrations of the salt and higher charge density of the cation result in smaller microdroplet size and weak water solubilization capacity. For 1-hexanol, a high concentration of this alcohol results in small microdroplet size but high water solubilization capacity. Analyses indicate that the salts compress the electric double layers of W/IL microemulsions, decrease the size of the microdroplets and consequently reduce the water solubilization capacity; the alcohol, however, facilitates the aggregation of AOT^?, increases the number of W/IL microdroplets, and therefore improves the water solubilization capacity of the system.     

Confinement Effects on the Magnetic Ionic Liquid 1-Ethyl-3-methylimidazolium Tetrachloroferrate(III)

Confinement effects for the magnetoresponsive ionic liquid 1-ethyl-3-methylimidazolium tetrachloroferrate(III), [C₂mim]FeCl₄, are explored from thermal, spectroscopic, and magnetic points of view. Placing the ionic liquid inside SBA-15 mesoporous silica produces a significant impact on the material’s response to temperature, pressure, and magnetic fields. Isobaric thermal experiments show melting point reductions that depend on the pore diameter of the mesopores. The confinement-induced reductions in phase transition temperature follow the Gibbs–Thomson equation if a 1.60 nm non-freezable interfacial layer is postulated to exist along the pore wall. Isothermal pressure-dependent infrared spectroscopy reveals a similar modification to phase transition pressures, with the confined ionic liquid requiring higher pressures to trigger phase transformation than the unconfined system. Confinement also impedes ion transport as activation energies are elevated when the ionic liquid is placed inside the mesopores. Finally, the antiferromagnetic ordering that characterizes unconfined [C₂mim]FeCl₄ is suppressed when the ionic liquid is confined in 5.39-nm pores. Thus, confinement provides another avenue for manipulating the magnetic properties of this compound.     

Structure and dynamics of N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide ionic liquid from molecular dynamics simulations

Molecular dynamics (MD) simulations were performed on N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (mppy+TFSI-) from 303 to 393 K to improve understanding of the structure and ion transport of this ionic liquid. The density, ion self-diffusion coefficients, conductivity, and viscosity of mppy+TFSI- predicted from MD simulations are in good agreement with experimental measurements. The time-dependent shear modulus of the ionic liquids was calculated and compared with that for nonionic liquids. On average each mppy+ cation was found to be coordinated by four TFSI- anions. The angular distributions of N(TFSI-)-N(mppy+)-N(TFSI-) and N(mppy+)-N(TFSI-)-N(mppy+) exhibit a maximum at 80-90 degrees and a second maximum at 180 degrees . Correlation of ion motion was found to lower ionic conductivity by approximately one-third from the expected value based upon ion self-diffusion coefficients. Rotational motion of the cation and anion are anisotropic with the degree of anisotropy increasing with decreasing temperature. Electrostatic interactions are responsible for slowing down the dynamics of the ionic liquid by more than an order of magnitude and a dramatic decrease of the time-dependent shear modulus.     

Glass-liquid transition, crystallization, and melting of a room temperature ionic liquid: thin films of 1-ethyl-3-methylimidazolium bis[trifluoromethanesulfonyl]imide studied with TOF-SIMS

To discuss the relationship between liquid, crystalline, and glassy states of ionic liquids, TOF-SIMS was used to analyze the glass-liquid transition, crystallization, and melting of 1-ethyl-3-methylimidazolium bis[trifluoromethanesulfonyl]imide ([emim][Tf(2)N]) at the molecular level at temperatures of 150-280 K. The [emim][Tf(2)N] molecules can be deposited thermally on a Ni(111) surface without decomposition. LiI was adsorbed onto the thin film in order to investigate the glass-liquid transition; it was incorporated in deeper layers at temperatures higher than 180 K. Crystallization of the film at around 200-220 K was identifiable from the abrupt increase in the [emim](+) yield, which probably results from the steric effect of the structured cations and anions forming anisotropic bonds in a specific layered structure. The glass-liquid transition and crystallization of [emim][Tf(2)N] differ significantly from those of water and alcohol in terms of the morphological change of the film and the interaction with adsorbed LiI. This behavior might be explained by the absence of a liquid-liquid phase transition for [emim][Tf(2)N]. The vapor-deposited thin films (2.5 and 5.0 monolayers) crystallize at around 200 K, but they melt gradually at temperatures considerably lower than the bulk melting point (ca. 260 K) because of the evolution of a quasi-liquid layer and the disappearance of a crystal template.     

Molecular dynamics simulation of the ionic liquid N-ethyl-N,N-dimethyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide

Thermodynamics, structure, and dynamics of an ionic liquid based on a quaternary ammonium salt with ether side chain, namely, N-ethyl-N,N-dimethyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide, MOENM2E TFSI, are investigated by molecular dynamics (MD) simulations. Average density and configurational energy of simulated MOENM2E TFSI are interpreted with models that take into account empirical ionic volumes. A throughout comparison of the equilibrium structure of MOENM2E TFSI with previous results for the more common ionic liquids based on imidazolium cations is provided. Several time correlation functions are used to reveal the microscopic dynamics of MOENM2E TFSI. Structural relaxation is discussed by the calculation of simultaneous space-time correlation functions. Temperature effects on transport coefficients (diffusion, conductivity, and viscosity) are investigated. The ratio between the actual conductivity and the estimate from ionic diffusion by the Nernst-Einstein equation indicates that correlated motion of neighboring ions in MOENM2E TFSI is similar to imidazolium ionic liquids. In line with experiment, Walden plot of conductivity and viscosity indicates that simulated MOENM2E TFSI should be classified as a poor ionic liquid.     

Rotational dynamics of a diatomic solute in the room-temperature ionic liquid 1-ethyl-3-methylimidazolium hexafluorophosphate

Reorientational time correlation functions C(l)(t)( identical withP(l)[cos theta(t)]) for a diatomic solute in 1-ethyl-3-methylimidazolium hexafluorophosphate (EMI(+)PF(6) (-)) are analyzed via molecular dynamics computer simulations, where <...> denotes an equilibrium ensemble average, P(l) the lth order Legendre polynomial and theta(t) the angle between the solute orientation at time t and its initial direction. Overall results are indicative of heterogeneous dynamics in EMI(+)PF(6) (-). For a small nondipolar solute, C(l)(t) are well-described as stretched exponential functions in wide time ranges. One striking feature is that after rapid initial relaxation, C(2)(t) decays more slowly than C(1)(t). As a result, the correlation time associated with the former is considerably longer than that with the latter. This is ascribed to solvent structural fluctuations, which allow large-amplitude solute rotations. As the solute size grows, relaxation of C(l)(t) approaches exponential decay.     

Homoleptic alkaline earth metal bis(trifluoromethanesulfonyl)imide complex compounds obtained from an ionic liquid

The first homoleptic alkaline earth bis(trifluoromethanesulfonyl)imide (Tf2N) complexes [mppyr]2[Ca(Tf2N)4], [mppyr]2[Sr(Tf2N)4], and [mppyr][Ba(Tf2N)3] were crystallized from a solution of the respective alkaline earth bis(trifluoromethanesulfonyl)imide and the ionic liquid [mppyr][Tf2N] (mppyr = 1,1-N-methyl-N-propylpyrrolidinium). In the calcium and strontium compounds, the alkaline earth metal (AE) is coordinated by four bidentately chelating Tf2N ligands to form isolated (distorted) square antiprismatic [AE(Tf2N)4]2- complexes which are separated by N-methyl-N-propylpyrrolidinium cations. In contrast, the barium compound, [mppyr][Ba(Tf2N)3], forms an extended structure. Here the alkaline earth cation is surrounded by six oxygen atoms belonging to three Tf2N- anions which coordinate in a bidentate chelating fashion. Three further oxygen atoms of the same ligands are linking the Ba2+ cations to infinite (infinity)(1)[Ba(Tf2N)3] chains.