Interface formation between compatible polymers as determined by neutron reflectometry: PMMA and PVC

Initial stages of interdiffusion at the interface between two films of poly(methylmethacrylate) (PMMA) and poly(vinyl chloride) (PVC) have been determined by neutron reflectometry. Experiments are performed at temperatures between the glass transition temperatures of the homopolymers. PMMA chains are thus not mobile, but are dissolving in PVC. The growth of the interface width with time follows a power law, which depends on temperature, and the position of the interface moves in the direction of the immobile component. With a PVC film on top, the enrichment of PMMA at the free surface is observed at later times.     

相容的聚甲基丙烯酸甲酯/[C12 MIM][PF6]离子液体体系在超临界CO2中的发泡性能

通过快速卸压法, 以超临界CO2为物理发泡剂, 研究了相容的聚甲基丙烯酸甲酯(PMMA)/1-n-十二烷基-3-甲基咪唑六氟磷酸盐([C12 MIM][PF6])离子液体(IL)复合体系的发泡性能. 加入IL后, PMMA对CO2的吸收量增加; 复合体系的玻璃化转变温度(Tg)随IL含量的增加而降低. IL对PMMA发泡行为的影响取决于发泡条件. 在较低温度和压力下, 纯PMMA无法发泡, IL的加入可促进泡孔形成; 提高温度和压力, 纯PMMA可以发泡, IL的加入在提高泡孔尺寸的同时使泡孔仍然保持尺寸分布均匀的微米级结构.     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] by incorporation of carbon dioxide into epoxide polymer and the miscibility behavior of its blends with poly(methyl methacrylate) or poly(vinyl chloride)

This study was related to the investigation of the chemical fixation of carbon dioxide to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer‐to‐polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] [poly(DOMA‐co‐EA)] from poly(glycidyl methacrylate‐co‐ethyl acrylate) [poly(GMA‐co‐EA)] and CO₂, quaternary ammonium salts showed good catalytic activity. The films of poly(DOMA‐co‐EA) with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) blends were cast from N,N′‐dimethylformamide solution. The miscibility of the blends of poly(DOMA‐co‐EA) with PMMA or PVC have been investigated both by DSC and visual inspection of the blends. The optical clarity test and DSC analysis showed that poly(DOMA‐co‐EA) containing blends were miscible over the whole composition range. The miscibility behaviors were discussed in terms of Fourier transform infrared spectra and interaction parameters based on the binary interaction model. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1472–1480, 2001     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.     

The asymmetrical orientational behavior of compatible blends of PMMA and PVC

The orientation and relaxation behavior of compatible blends of poly(methyl methacrylate) (PMMA) and poly(vinyl chloride) (PVC) was investigated. The deformation was performed at 9 K above the glass transition temperature. Based on birefringence and IR-dichroic measurements, it was found that the orientation of PMMA is strongly increased in the blends as compared to pure PMMA at identical draw ratios.The orientation of PVC, on the other hand, is not changed by blending. The results are discussed in terms of friction coefficients and their enhancement by molecular interactions.Dedicated to Prof. E. W. Fischer on the occasion of his 665th birthday     

Luminescent PMMA Films and PMMA@SiO2 Nanoparticles with Embedded Ln3+ Complexes for Highly Sensitive Optical Thermometers in the Physiological Temperature Range**

In recent years, luminescent materials doped with Ln³⁺ ions have attracted much attention for their application as optical thermometers based on both downshifting and upconversion processes. This study presents research done on the development of highly sensitive optical thermometers in the physiological temperature range based on poly(methyl methacrylate) (PMMA) films doped with two series of visible Ln³⁺ complexes (Ln³⁺=Tb³⁺, Eu³⁺, and Sm³⁺) and SiO₂ nanoparticles (NPs) coated with these PMMA films. The best performing PMMA film doped with Tb³⁺ and Eu³⁺ complexes was the PMMA[TbEuL₁tppo]1 film (L₁=4,4,4-trifluoro-1-phenyl-1,3-butadionate; tppo=triphenylphosphine oxide), which showed good temperature sensing of S_r=4.21 % K⁻¹ at 313 K, whereas for the PMMA films doped with Tb³⁺ and Sm³⁺ complexes the best performing was the PMMA[TbSmL₂tppo]3 film (L₂=4,4,4-trifluoro-1-(4-chlorophenyl)-1,3-butadionate), with S_r=3.64 % K⁻¹ at 313 K. Additionally, SiO₂ NPs coated with the best performing films from each of the series of PMMA films (Tb–Eu and Tb–Sm) and their temperature-sensing properties were studied in water, showing excellent performance in the physiological temperature range (PMMA[TbEuL₁tppo]1@SiO₂: S_r=3.84 % °C at 20 °C; PMMA[TbSmL₂tppo]3@SiO₂: S_r=3.27 % °C at 20 °C) and the toxicity of these nanoparticles on human cells was studied, showing that they were nontoxic.     

Grafting of Poly(Methyl Methacrylate) onto Poly(Vinyl Chloride) through Benzodithioate Groups

The synthesis and the characterization of poly (methyl methacrylate) (PMMA) grafted to poly(vinyl chloride) (PVC) through benzodithioate groups are studied. Unlike results generally obtained with conventional free-radical initiators for systems involving PVC and MMA, high conversions, and grafting efficiencies are achieved with azobis-isobutyronitrile. The paper describes the synthesis of p-vinylbenzodithioate-containing PVC and the dependence of the characteristics of PVC-g-PMMA on the composition of the reaction mixture. Characterization of the graft copolymers includes UV and IR spectroscopy, GPC, and microstructure analysis by removal of PMMA side chains by aminolysis of dithioesters groups. Intrinsic viscosity, glass transition temperature, and thermal sensitivity were investigated to confirm the grafted nature of the copolymer.     

2-[3-(Trifluoromethyl)phenyl]furo[3,2-b]pyrroles: synthesis and reactions

The synthesis and reactions of methyl 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole-5-carboxylate (1a) are described. Upon reaction with methyl iodide, benzyl chloride, or acetic anhydride, this compound gave N-substituted products 1b-d. By hydrolysis of compounds 1a-c, the corresponding acids 2a-c were formed, or by reaction with hydrazine-hydrate, the corresponding carbohydrazides 3a-c were formed. By heating 2-[3-(trifluoromethyl)phenly]-4H-furo[3,2-b]pyrrole-5-carboxylic acid (2a) in acetic anhydride, 4-acetyl-2-[3-(trifluoromethyl)phenyl]furo[3,2-b]pyrrole (4) was formed. By hydrolysis of 4, 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole (5a) was formed, and reactions with methyl iodide or benzyl chloride gave N-substituted products 5b-c. The reaction of 4 with dimethyl butynedioate gave substituted benzo[b]furan 6. Compound 3a reacted with triethyl orthoesters giving 7a-c, which afforded with phosphorus (V) sulphide the corresponding thiones 8a-c. The thiones 8a-c reacted with hydrazine hydrate to form hydrazine derivatives 9a-c. The reaction of triethyl orthoformiate with compounds 9a-c led to furo[2′,3′: 4,5]pyrrolo[1,2-d][1,2,4]triazolo[3,4-f][1,2,4]triazines 10a-c. Hydrazones 11a-c were formed from 3a-c and 5-[3-(trifluoromethyl)phenyl]furan-2-carboxaldehyde. The effect of microwave irradiation on some condensation reactions was compared with “classical” conditions. The results showed that microwave irradiation shortens the reaction time while affording comparable yields.     

Controlled Anionic Synthesis of Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate]

Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate] (poly(NCzMA)) with controlled molecular weight and narrow molecular weight distribution was successfully synthesized using (methyl methacryloyl)potassium (MMA) as a weak initiator in the presence of diethylzinc (Et₂Zn) in THF at –78°C. Et₂Zn acted both as an additive for the coordination with enolate anion and nitro group and as a scavenger to remove impurities. Block copolymers PMMA‐block‐poly(NCzMA)‐block‐PMMA and poly(NCzMA)‐block‐PS‐block‐poly(NCz‐MA), were also synthesized quantitatively (PMMA: poly(methyl methacrylate), PS: polystyrene). The results indicate that Et₂Zn can be used to synthesize the polymers of solid, nitro group‐containing methacrylate monomers by anionic polymerization in THF.     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐ 4‐yl)methyl methacrylate‐co‐styrene] by addition reaction of carbon dioxide and its compatibility with poly(methyl methacrylate) or poly(vinyl chloride)

We investigated the chemical fixation of carbon dioxide (CO ₂) to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer to polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl)methyl methacrylate‐co‐styrene] [poly(DOMA‐co‐St)] from the addition of CO ₂ to poly(glycidyl methacrylate‐co‐styrene) [poly(GMA‐co‐St)], quaternary ammonium salts showed good catalytic activity at mild reaction conditions. The CO ₂ addition reaction followed pseudo first‐order kinetics with the concentration of poly(GMA‐co‐St). In order to expand the applications of the CO ₂ fixed copolymer, polymer blends of this copolymer with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) were cast from N,N′‐dimethylformamide (DMF) solution. Miscibility of blends of poly(DOMA‐co‐St) with PMMA or PVC have been investigated both by differential scanning calorimetry (DSC) and visual inspection of the blends, and the blends were miscible over the whole composition ranges. The miscibility behaviors were also discussed in terms of FT‐IR spectra. Copyright © 2002 John Wiley & Sons, Ltd.     

Investigation of polymer miscibility by spectroscopic methods. III. Labeling of poly(vinyl chloride), poly(methyl methacrylate) and poly(styrene-co-acrylonitrile) with fluorescent chromophores for nonradiative energy transfer studies

Poly(vinyl chloride) (PVC) is generally recognized as miscible with s.poly(methyl methacrylate) (s.PMMA), poly(?-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) copolymer (SAN) containing 27 wt % AN. Nonradiative energy transfer (NRET) is a very sensitive technique in the investigation of the polymer miscibility. To compare by NRET the actual degree of miscibility of the PVC/s.PMMA, PVC/PCL, and PVC/SAN polymer pairs, each polymer is to be labeled with a fluorescent chromophore to an extent of 1 or 2 mol %. This paper reports efficient pathways to attach anthracene (acceptor) or naphthalene (donor) onto preformed PVC, s.PMMA, and SAN samples. All the attempts for grafting carbazole (donor) moieties have failed, as well as any labeling of PCL whatever the nature of the chromophore.     

The photolysis in polymer matrices of dyes containing a benzothioxanthene chromophore linked with a hindered amine

Novel dyes based on a benzothioxantheneimide chromophore covalently linked with a sterically hindered amine (HAS) were prepared and their light stability was tested in polymer matrices. The following dyes: 2-(2,2,6,6-tetramethyl-4-piperidyl)-thioxantheno[2,1,9-dej]isoquinoline-1,3-dione (BTXINH) and N-alkoxy derivative 2-(1-(1′-phenylethoxy)-2,2,6,6-tetramethyl-4-piperidyl)-thioxantheno[2,1,9-dej] isoquinoline-1,3-dione (BTXINOR) were prepared. For comparison the parent dye without HAS structural unit benzothioxanthene-3,4-dicarboxylic anhydride and the N-alkyl derivative 2-(1-dodecyl)-thioxantheno[2,1,9-dej]isoquinoline-1,3-dione (BTXID) and the stable nitroxyl radical 2-(1-oxo-2,2,6,6-tetramethyl-4-piperidyl)-thioxantheno[2,1,9-dej]isoquinoline-1,3-dione (BTXINO) were also tested. Their spectral properties, absorption and fluorescence have been examined in polystyrene (PS), poly(methyl methacrylate) (PMMA), poly(vinyl chloride) (PVC) and in isotactic polypropylene (PP). The light stability of these dyes and model compounds were examined in thin polymer films. The photolysis rate was monitored by UV spectroscopy and for all additives under study it was in the range 10⁻⁴–10⁻³ h⁻¹. The rate of decomposition was the lowest for the parent amine BTXINH in PMMA, PS and PVC. The rate constants of photolysis are about 10 times higher for all adducts and the lowest rate of decomposition in PP matrix was observed for BTXINOR. A distinct stabilization effect of HAS structural unit on the dye decomposition was not observed. The light stability of the dyes was more influenced by the selection of the polymer. The photolysis proceeds rather fast in PP, and moderately in PS and PVC compared to PMMA.     

Synthesis and Characterization of Poly(methyl methacrylate)-b-Polystyrene/TiO2 Nanocomposites Via Reversible Addition-Fragmentation Chain Transfer Polymerization

A diblock copolymer, poly(methyl methacrylate)-b-polystyrene (PMMA-b-PS), was grafted onto the surface of nano-titania (nano-TiO₂) successfully via reversible addition-fragmentation chain transfer (RAFT) polymerization. The surface of TiO₂ nanoparticles was modified initially by attaching dithioester groups to the surface using silane coupling agent 3-(chloropropyl)triethoxy silane and sodium ethyl xanthate. The polymerization of methyl methacrylate and styrene were then initiated and propagated on the TiO₂ surface by RAFT polymerization. The resulting composite nanoparticles were characterized by means of XPS, FT-IR, ¹H NMR and TGA. The results confirmed the successful grafting of poly(methyl methacrylate) (PMMA) and diblock copolymer chains onto the surface of TiO₂. The amount of PMMA grafted onto the TiO₂ surface increased with the polymerization time. Moreover, the kinetic studies revealed that the ln([M]₀/[M]), where [M]₀ is the initial and [M] is the time dependent monomer concentrations, increased linearly with the polymerization time, indicating the living characteristics of the RAFT polymerization.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-SILICA NANO-COMPOSITE

ABSTRACT

Transparent organic/pre-ceramic composite films of poly(methyl methacrylate) [PMMA] and perhydropolysilazane [PHPS] were synthesized by blending poly(methyl methacrylate-co-2-hydroxyethyl methacrylate) [P(MMA-co-HEMA)] random copolymers and PHPS. In the blend films, P(MMA-graft-PHPS) graft copolymers were formed, PMMA and PHPS were microscopically phase-separated in the solid state. Morphology of the microphase separation was investigated by transmission electron microscopy by changing HEMA content of the random copolymers and blend ratio of PHPS to HEMA. To convert PHPS to silica glass, the blend films were calcinated at 100°C. The morphology of the microphase separation of the films was not changed by the calcinations; the calcinated films were transparent. When the molar content of HEMA of P(MMA-co-HEMA) and the molar content of PHPS to HEMA in feed were 14.5% and 150%, respectively, the morphology was well ordered lamellae of PMMA and silica.     

Development and characterization of reactive extruded PVC/polyacrylate blends

This paper describes a method to obtain polymer blends by the absorption of a liquid solution of monomer, initiator, and a crosslinking agent in suspension type porous poly(vinyl chloride) (PVC) particles, forming a dry blend. These PVC/monomer dry blends are reactively polymerized in a twin‐screw extruder to obtain the in situ polymerization in a melt state of various blends: PVC/poly(methyl methacrylate) (PVC/PMMA), PVC/poly(vinyl acetate) (PVC/PVAc), PVC/poly(butyl acrylate) (PVC/PBA) and PVC/poly(ethylhexyl acrylate) (PVC/PEHA). Physical PVC/PMMA blends were produced, and the properties of those blends are compared to reactive blends of similar compositions. Owing to the high polymerization temperature (180°C), the polymers formed in this reactive polymerization process have low molecular weight. These short polymer chains plasticize the PVC phase reducing the melt viscosity, glass transition and the static modulus. Reactive blends of PVC/PMMA and PVC/PVAc are more compatible than the reactive PVC/PBA and PVC/PEHA blends. Reactive PVC/PMMA and PVC/PVAc blends are transparent, form single phase morphology, have single glass transition temperature (T_g), and show mechanical properties that are not inferior than that of neat PVC. Reactive PVC/PBA and PVC/PEHA blends are incompatible and two discrete phases are observed in each blend. However, those blends exhibit single glass transition owing to low content of the dispersed phase particles, which is probably too low to be detected by dynamic mechanical thermal analysis (DMTA) as a separate T_g value. The reactive PVC/PEHA show exceptional high elongation at break (～90%) owing to energy absorption optimized at this dispersed particle size (0.2–0.8 µm). Copyright © 2005 John Wiley & Sons, Ltd.     

Surface segregation of poly(2-methoxyethyl acrylate) in a mixture with poly(methyl methacrylate)

Poly(2-methoxyethyl acrylate) (PMEA) exhibits excellent blood compatibility. To understand why such a surface functionality exists, the surface of PMEA should be characterized in detail, structurally and dynamically, under not only ambient conditions, but also in water. However, a thin film of PMEA supported on a solid substrate can be easily broken, namely it is dewetted. Our strategy to overcome this difficulty is to mix PMEA with poly(methyl methacrylate) (PMMA). Differential scanning calorimetry and cloud point measurements revealed that the PMEA/PMMA blend has a phase diagram with a lower critical solution temperature. The blend surface was also characterized by X-ray photoelectron spectroscopy in conjunction with microscopic observations. Although PMEA is preferentially segregated over PMMA at the blend surface due to its lower surface free energy, the extent of segregation in the as-prepared films was not sufficient to cover the surface. Annealing the blend film at an appropriate temperature, higher than the glass transition temperature and lower than the phase-separation temperature of the blend, enabled us to prepare a stable and flat surface that was perfectly covered with PMEA.     

Diastereoselective reaction of (1S,2S)-2-amino-1-(4-nitrophenyl)-1,3-propanediol with aromatic aldehydes. Synthesis of (1R,2R,4S,5S,8S)-2,8-diaryl-4-(4-nitrophenyl)-1-aza-3,7-dioxabicyclo[3.3.0]octanes

We have synthesized a series of (1R,2R,4S,5S,8S)-2,8-diaryl-4-(4-nitrophenyl)-1-aza-3,7-dioxabicyclo[3.3.0]octanes as a result of reaction of (1S,2S)-2-amino-1-(4-nitrophenyl)-1,3-propanediol with aromatic aldehydes. The structure of the compounds obtained was established on the basis of ¹H NMR data. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 757–763, May, 2006.     

Hydrogen ion-selective poly(vinyl chloride) membrane electrode based on a p-tert-butylcalix[4]arene-oxacrown-4

A hydrogen ion-selective poly(vinyl chloride) (PVC) membrane electrode was developed using p-tert-butylcalix[4]arene-oxacrown-4 as ionophore. Apart from the ionophore, plasticisers and lipophilic anions were blended, in various proportions, with PVC in tetrahydrofurane and mixtures so prepared were poured onto glass surfaces to form the membrane. 2-Nitrophenylpentylether has proved to be the best alternative as plasticiser and the lipophilic anions tried have turned out to have an adverse effect on the pH response. The electrode of the optimum characteristics had a composition of 2% p-tert-butylcalix[4]arene-oxacrown-4, 68.3% o-NPPE and 29.7% PVC. The electrode showed an apparent Nernstian response in the pH range 2-11 with a slope of 54.2±0.4 mV pH⁻¹ at 20±1 °C. It has a rapid potential-response to changes of pH, high ion selectivity towards lithium, sodium and potassium, and other characteristics comparable to those reported for the conventional pH glass membrane electrode. It appears to be a suitable potentiometric indicator electrode specifically for hydrofluoric acid solutions.     

Thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends

The aim of this work was to study the thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends. For that purpose, blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of diethyl-2-hexyl phthalate as plasticiser. Their miscibility was investigated by using differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Their thermo-oxidative degradation at 180 ± 1 °C was studied and the amount of HCl released from PVC was measured by a continuous potentiometric method. Degraded samples were characterised, after purification, by FTIR spectroscopy and UV-visible spectroscopy. The results showed that the two polymers are miscible up to 60 wt% of poly(methyl methacrylate) (PMMA). This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (CO) of PMMA and hydrogen (CHCl) groups of PVC as shown by FTIR analysis. On the other hand, PMMA exerted a stabilizing effect on the thermal degradation of PVC by reducing the zip dehydrochlorination, leading to the formation of shorter polyenes.     

DC Electrical Study of Modified PMMA,PVC and their Blend

Summary: Thin films of high molecular weight PMMA, PVC and their blend were prepared with solution cast method. Further they were modified by adding Camphor Sulphonic Acid (CSA) to them. DSC studies indicate single glass transition temperature (Tg) for unmodified as well as modified blends indicating the miscibility of polymers. FTIR studies show the interaction between CSA-PVC, CSA-PMMA, CSA-(PVC+PMMA) blend. The D.C. electrical study was carried out at various temperatures from room temperature (307 K) to 373 K. After modification the variation of DC conductivity (σ) is found to decrease in PVC and the PVC-PMMA blend whereas it is found to increase in PMMA with rise in temperature.