久效磷分子印迹聚合物分子识别特性的光谱研究

采用分子印迹技术合成了对有机磷农药久效磷有高度选择性的聚合物,通过1H NMR和紫外光谱研究了印迹聚合物的结合机理和识别特性。结果表明,该聚合物通过协同氢键作用形成1∶2型氢键配合物专一地结合久效磷。聚合物红外光谱研究表明,聚合物表面存在可与印迹分子相互作用的官能团。     

分子印迹材料选择性截留卷烟烟气中芳胺的研究

采用分子印迹技术合成了一种对1-萘胺有高度选择性的分子印迹聚合物材料。应用固相萃取吸附试验研究了该聚合物对1-萘胺及其结构类似物的选择特性,表明印迹聚合物材料对4种芳胺类物质表现出良好的选择性结合能力。将所制备的印迹聚合物按不同剂量添加到卷烟嘴棒中,考察其对卷烟烟气中芳胺的截留效果。结果显示,该分子印迹材料能选择性截留卷烟烟气中的1-萘胺、2-萘胺、3-氨基联苯和4-氨基联苯等烟气有害成分;当印迹聚合物添加量为50mg时,卷烟烟气中芳胺的降低率达到30%。     

甲胺磷分子印迹聚合物的结合机理及其分子识别特性的光谱学研究

采用分子自组装印迹技术合成了一种新的对甲胺磷农药分子有高度选择性的分子印迹聚合物。在预聚合阶段,通过1H NMR,FTIR和UV光谱法研究了分子印迹聚合物的形成机理。结果表明模板分子和功能单体通过协同氢键作用形成1∶2型氢键配合物,配合物稳定常数K＝2.894×106 L2·mol-2,稳定性好。运用红外光谱法研究了印迹聚合物对模板分子的特异性识别作用,进一步表明印迹聚合物通过协同氢键作用特异性地识别模板分子。     

甲基对硫磷分子印迹聚合物光谱研究

以甲基对硫磷为模板分子,分别以甲基丙烯酸、丙烯酰胺和4-乙烯基吡啶为功能单体,合成了三种分子印迹聚合物。利用紫外光谱研究了甲基对硫磷与不同功能单体间作用力的大小,表明4-乙烯基吡啶与甲基对硫磷间的作用力明显强于另外两种单体。红外光谱研究表明4-乙烯基吡啶可以同模板分子的P—O—C和—NO₂部位发生反应,并形成稳定的共价化合物,而另外两种单体仅在P—O—C部位与模板分子缔合。此外,由三种分子印迹聚合物的红外光谱图可以看出,在聚合物表面确实存在着可与模板分子相互作用的官能团。     

类特异性分子印迹聚合物微球的识别机理及其光谱学研究

以氯磺隆为模板分子,甲基丙烯酸二乙氨基乙酯为功能单体,三甲氧基丙烷三甲基丙烯酸酯为交联剂,乙腈为致孔剂,在60℃温度下,采用热引发沉淀聚合方法制备了一种能同时吸附氯磺隆、噻吩磺隆、单嘧磺隆的类特异性分子印迹微球,并运用紫外光谱、红外光谱法等手段对其识别机理进行研究。结果表明,该聚合物微球对氯磺隆及其分子结构类似物噻吩磺隆、单嘧磺隆具有类特异性吸附能力,同时揭示了分子印迹微球是通过氢键作用特异性地识别模板分子及其类似物。     

乙酰甲胺磷分子印迹聚合物识别特性的光谱研究

用紫外及红外分光光度法研究了印迹分子和单体之间的作用力,结果表明随着甲胺磷浓度的增加,紫外吸收曲线的最大吸收波长发生红移,说明两者之间存在氢键作用力;经红外光谱分析进一步表明乙酰甲胺磷的—NH和PO可以和甲基丙烯酸的—COOH之间有氢键作用。采用悬浮聚合法制备乙酰甲胺磷分子印迹聚合物微球,除去印迹分子的聚合物留下了对印迹分子特异识别的结合位点。此聚合物可用来做吸附填料,分离富集环境样品中的乙酰甲胺磷。     

磺胺二甲嘧啶分子印迹聚合物制备与光谱特性

本研究以磺胺二甲嘧啶为模板分子,甲基丙烯酸为功能单体,低温紫外引发聚合制备分子印迹聚合物,用紫外光谱法对磺胺二甲嘧啶与甲基丙烯酸的结合作用及磺胺二甲嘧啶印迹聚合物的静态吸附性能和选择性能进行研究,试验结果表明,溶液中的功能单体与印迹分子之间产生了结合作用;与空白印迹聚合物相比,以甲基丙烯酸为功能单体、磺胺二甲嘧啶为模板的分子印迹聚合物展现了较高的结合容量,与其他结构类似的底物磺胺异唑相比,磺胺二甲嘧啶分子印迹聚合物对磺胺二甲嘧啶模板分子显示出明显的选择性和特异性,静态分配系数K_D可达282.3 mg·mL-1,分离因子α可达3.9,并预测磺胺二甲嘧啶分子印迹聚合物结合机理。分析了甲基丙烯酸、二甲基丙烯酸乙二醇酯和磺胺二甲嘧啶分子印迹聚合物的红外谱图,研究结果表明制备的磺胺二甲嘧啶印迹聚合物中CC双键峰很小,并且功能键羧酸键没有明显变化,经交联聚合得到的聚合物确实存在可以同印迹分子相互作用的化学基团。     

1-氨基萘印迹聚合物分子识别特性的光谱学研究

采用分子自组装印迹技术合成了一种对1-氨基萘有高度选择性的分子印迹聚合物新材料。应用紫外光谱、红外光谱、X射线光电子能谱和1H核磁共振波谱等研究了印迹聚合物的结合位点和识别机理。结果表明模板分子与功能单体通过氢键作用形成1:1型配合物,配合物的稳定常数K=5.537×104L/mol。1-氨基萘分子氨基上的氮原子是质子接受体,功能单体甲基丙烯酸分子羧基上的氢原子是氢键的质子给予体,是与1-氨基萘形成氢键作用的选择性识别位点。利用平衡吸附试验研究了印迹聚合物的结合特性,表明印迹聚合物对1-氨基萘分子具有特异的识别性能。     

可天宁印迹聚合物分子识别特性的光谱与XPS研究

以可天宁(COT)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了一种新型的分子印迹聚合物。采用紫外光谱、X射线光电子能谱、红外光谱和1H NMR波谱研究了印迹聚合物的结合位点和识别机理。结果表明,该聚合物通过协同氢键作用形成1∶2型配合物,专一地结合可天宁分子。MAA分子羧基上的氢原子是氢键的质子给予体;COT分子吡啶环上的氮原子以及羰基上的氧原子是质子的接受体,是与MAA形成氢键作用的选择性识别位点。     

分子印迹聚合反应中致孔剂选择的紫外光谱分析

在制备分子印迹聚合物的过程中,模板分子与功能单体的结合程度直接影响到分子印迹聚合物的吸附性能,适宜的致孔剂对模板分子与功能单体之间的作用力影响巨大.采用紫外光谱分析法,研究了模板分子香兰素与功能单体丙烯酰胺(AM)在3种致孔剂乙腈、四氢呋喃和乙酸乙酯中相互作用力的大小.实验结果发现,香兰素与AM在乙腈致孔剂中,227nm处的紫外吸收峰发生蓝移,蓝移5nm,且吸收峰增强,表明两者之间发生较强的氢键作用力;而它们在另两种致孔剂中作用力很微弱.因此,加入功能单体后光谱改变越大分子间作用力越强,由此制备的分子印迹聚合物的吸附性能越好.     

A steered molecular dynamics study on the elastic behaviour of knotted polymer chains

In this paper the influence of a knot on the structure of a polymethylene （PM） strand in the tensile process is investigated by using the steered molecular dynamics （SMD） method. The gradual increasing of end-to-end distance, R, results in a tighter knot and a more stretched contour. That the break in a knotted rope almost invariably occurs at a point just outside the ＇entrance＇ to the knot, which has been shown in a good many experiments, is further theoretically verified in this paper through the calculation of some structural and thermodynamic parameters. Moreover, it is found that the analyses on bond length, torsion angle and strain energy can facilitate to the study of the localization and the size of a knot in the tensile process. The symmetries of torsion angles, bond lengths and bond angles in the knot result in the whole symmetry of the knot in microstructure, thereby adapting itself to the strain applied. Additionally, the statistical property of the force-dependent average knot size illuminates in detail the change in size of a knot with force f, and therefore the minimum size of the knot in the restriction of the potentials considered in this work for a PM chain is deduced. At the same time, the difference in response to uniaxial strain, between a knotted PM strand and an unknotted one is also investigated. The force-extension profile is easily obtained from the simulation. As expected, for a given f, the knotted chain has an R significantly smaller than that of an unknotted polymer. However, the scaled difference becomes less pronounced for larger values of N, and the results for longer chains approach those of the unknotted chains.     

Negative differential resistance in polymer molecular devices modulated with molecular length

We study the electronic transport properties of polymer molecular devices by applying first-principles method. The results show that the electronic transport properties depend on molecular length. Negative differential resistance can be observed and can be modulated with molecular length.     

共轭高聚物双分子链中激子生成的动力学研究

通过对耦合共轭高分子双链中激子生成的动力学研究,讨论了受到光激发后,激子在分子内或分子间生成的制约因素.激子的生成除了受分子链间耦合强度的制约,还受到光激发模式的影响.结果表明,激子既可以在分子内生成,也可以在耦合分子间生成.增大分子之间的相互作用强度,可以增大在分子之间生成激子的概率.     

Density-functional theory for polymer fluids with molecular weight polydispersity

We develop a density-functional theory for polydisperse polymer fluids satisfying the Schulz-Flory distribution. The resulting equations are remarkably simple and quickly solved, the computational effort scaling with the polydispersity index, rather than the average molecular weight. Equilibrium, or "living", polymers enter naturally as very polydisperse samples. We illustrate the importance of polydispersity on colloid stability by investigating interactions between adsorbing and nonadsorbing surfaces. Significant free energy barriers are present in monodisperse samples, but these diminish as the degree of polydispersity increases.     

A molecular dynamics study of ion migration in a doped electroactive polymer

Simulating the \hbox{BF}_{4}^{-} -doped poly(3-octylthiophene) lattice by molecular dynamics results in a structure in which dopant ions intercalate as a sandwich between thiophene rings on adjacent polymer chains. The ions occupy sites in channels parallel to the polymer main chain, which retains a high degree of planarity in contrast to the pristine (undoped) polymer. Even when lattice imperfections are created by expanding the cell, Coulomb forces ensure that the intercalation features containing the dopant channels are largely retained. On applying electric fields in the principal directions of the 'perfect lattice' it is found that the ions migrate most readily along the ion-channel directions (the lattice c axis), leaving the lattice undisturbed. Although higher electric fields cause dopant migration to occur perpendicular to the channel directions they destroy the intercalated lattice. In the reduced-order lattice regions substantial motion of the ions are predicted at a critical value of the lattice parameter.     

Role of molecular architecture on the vitrification of polymer thin films

We show that thin film star-shaped macromolecules exhibit significant differences in their average vitrification behavior, in both magnitude and thickness dependence, from their linear analogs. This behavior is dictated by a combination of their functionality and arm length. Additionally, the glass transition temperature at the free surface of a star-shaped molecule film may be higher than that of the interior, in contrast to their linear analogs where the opposite is true. These findings have implications for other properties, due largely to the origins, entropic, of this behavior.     

Distribution of molecularly imprinted polymer layers on macroporous silica gel particles by STEM and EDX

Using transmission electron microscopy (TEM) in parallel and scanning mode (STEM) combined with energy dispersive X-ray spectroscopy (EDX) the distribution of molecularly imprinted polymer layers covalently grafted on the inner and outer surface of macroporous silica gel particles was observed. The grafting was achieved using a special initiator system (iniferter) and applied on a well known model system producing molecularly imprinted layers with L-phenyl alanine analide (L-PA) as template. By staining the sample with RuO(4) before its embedment in epoxy resin and cutting ultra thin slices it was possible to identify the stained grafted polymer on the silica matrix by EDX. Based on this, complete particle slices could be investigated by visual means according to the presence or absence of grafted polymer and its layer homogeneity.     

Effect of molecular weight on conductivity of polymer electrolytes

The ionic conductivity, σ, of mixtures of poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfone)imide (LiTFSI) was measured as a function of molecular weight of the PEO chains, M, over the range 0.2-5000 kg/mol. Our data are consistent with an expression σ = σ₀ + K/M proposed by Shi and Vincent [Solid State Ionics 60 (1993)] where σ₀ and K are exponential and linear functions of inverse temperature respectively. Explicit expressions for σ₀ and K are provided.     

Electrochemical sensing for the detection of 2,4-dichlorophenoxy acetic acid using molecularly imprinted polymer membrane

Molecularly imprinted polymer (MIP) membranes were used to develop highly sensitive chemical sensors for the detection of herbicide 2,4-dichlorophenoxy acetic acid (2,4-d). The 2,4-d imprinted composite MIP membranes were prepared, and the characterization was done by UV-VIS spectrophotometer, Fourier transform infrared spectroscopy, and scanning electron microscopy, and the same were fitted in a new electrochemical sensor model. Membrane electroconductivity measurements were performed by applying a small-amplitude alternating voltage (20 mV) with a varying frequency from 20 Hz to 80 kHz generated by a low-frequency wave form generator. The measured changes in the membrane ionic/electric conductivity as a function of 2,4-d concentration was allowed to evaluate the recognition properties of the prepared membrane. This sensor is useful in detecting 2,4-d herbicide having concentration range 10^-3 M to 10^-6 M. The cross-selectivity of the sensor, reproducibility of results, and reusability of MIP membrane were examined and found remarkable and recommendable.