夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响

惯性约束聚变频率转换系统中,大口径薄型KDP晶体的面形质量是影响频率转换效率能否达到设计要求的关键因素之一。针对45放置状态下口径为400 mm400 mm的三倍频KDP晶体,采用ANSYS有限元分析软件,建立了不同夹持方式和具有不同加工误差的KDP晶体模型和夹具模型,分析了加工误差对不同夹持方式下KDP晶体附加面形的影响,给出了不同加工误差和不同夹持情况下,KDP晶体附加面形的P-V值和RMS值。研究结果表明,夹持方式和加工误差是引起KDP晶体附加面形变化的重要因素,正面压条夹持方式即使在晶体和夹具存在加工误差时也可以较好地控制晶体的附加面形。     

夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响

惯性约束聚变频率转换系统中,大口径薄型KDP晶体的面形质量是影响频率转换效率能否达到设计要求的关键因素之一。针对45放置状态下口径为400 mm400 mm的三倍频KDP晶体,采用ANSYS有限元分析软件,建立了不同夹持方式和具有不同加工误差的KDP晶体模型和夹具模型,分析了加工误差对不同夹持方式下KDP晶体附加面形的影响,给出了不同加工误差和不同夹持情况下,KDP晶体附加面形的P-V值和RMS值。研究结果表明,夹持方式和加工误差是引起KDP晶体附加面形变化的重要因素,正面压条夹持方式即使在晶体和夹具存在加工误差时也可以较好地控制晶体的附加面形。     

加工误差引入的薄型KDP晶体附加面形

针对惯性约束聚变（ICF）驱动装置中口径为400 mm400 mm薄型频率转换KDP晶体在45放置状态下产生的附加面形问题,采用有限元分析软件ANSYS,建立了以实测数据为基础的大口径薄型KDP晶体的应变模型和有加工误差的夹具模型,仿真分析了KDP晶体的加工误差和夹具的加工误差对KDP晶体附加面形的影响, 给出了KDP晶体附加面形变化的P-V值和RMS值。在此基础上,通过对KDP晶体的加工误差及夹具支撑表面不同类型和不同大小加工误差的分析和比较,得出：KDP晶体边缘的加工误差和夹具支撑表面的凹型加工误差是引起较大附加面形的原因之一,KDP晶体的加工误差也会导致其面形变化不均匀,而夹具支撑表面的凸型、波浪形加工误差和压条表面的随机加工误差对KDP晶体附加面形的影响相对较小,且支撑表面的随机加工误差引起的附加面形变化介于其他两者之间。     

加工误差引入的薄型KDP晶体附加面形

针对惯性约束聚变（ICF）驱动装置中口径为400 mm400 mm薄型频率转换KDP晶体在45放置状态下产生的附加面形问题,采用有限元分析软件ANSYS,建立了以实测数据为基础的大口径薄型KDP晶体的应变模型和有加工误差的夹具模型,仿真分析了KDP晶体的加工误差和夹具的加工误差对KDP晶体附加面形的影响, 给出了KDP晶体附加面形变化的P-V值和RMS值。在此基础上,通过对KDP晶体的加工误差及夹具支撑表面不同类型和不同大小加工误差的分析和比较,得出:KDP晶体边缘的加工误差和夹具支撑表面的凹型加工误差是引起较大附加面形的原因之一,KDP晶体的加工误差也会导致其面形变化不均匀,而夹具支撑表面的凸型、波浪形加工误差和压条表面的随机加工误差对KDP晶体附加面形的影响相对较小,且支撑表面的随机加工误差引起的附加面形变化介于其他两者之间。     

夹持方式对频率转换KDP晶体面形的影响

 针对惯性约束聚变（ICF）系统中大口径超薄KDP晶体在不同夹持和不同姿态下的面形变化,采用有限元分析软件ANSYS,建立了大口径超薄KDP晶体在不同夹持和不同姿态下的应变模型及其边界条件的确定方法,计算了四周简支正面点力、四周固支正面压条、四周简支侧面点力、四周固支侧面压条4种夹持方式在30°和垂直姿态下大口径超薄KDP晶体的面形变化,并给出了面形变化的P-V值和RMS值。在此基础上,通过对不同夹持和不同姿态下KDP晶体面形变化的分析和比较,给出了四周固支正面压条是引起晶体面形变化相对较小的夹持方式的结论。     

夹持方式对频率转换KDP晶体面形的影响

针对惯性约束聚变（ICF）系统中大口径超薄KDP晶体在不同夹持和不同姿态下的面形变化,采用有限元分析软件ANSYS,建立了大口径超薄KDP晶体在不同夹持和不同姿态下的应变模型及其边界条件的确定方法,计算了四周简支正面点力、四周固支正面压条、四周简支侧面点力、四周固支侧面压条4种夹持方式在30°和垂直姿态下大口径超薄KDP晶体的面形变化,并给出了面形变化的P-V值和RMS值。在此基础上,通过对不同夹持和不同姿态下KDP晶体面形变化的分析和比较,给出了四周固支正面压条是引起晶体面形变化相对较小的夹持方式的结论。     

大口径KDP晶体折射率非均匀性检测

KDP晶体的折射率不均匀性将导致光束的空间分布存在不同程度的相位失配,从而使得三倍频系统的转换效率下降。为了得到KDP晶体折射率非均匀性的高精度检测结果,基于正交偏振干涉法,采用ZYGO MST大口径干涉仪,测量得到了大口径KDP晶体折射率非均匀性分布,其测量精度达到10-7,并通过实验研究了晶体面形对测量结果的影响。对晶体e光折射率非均匀性的高精度检测,为大口径晶体材料生长工艺、加工工艺等改进和提高提供了定量的检测依据。     

机械夹持状态下KDP晶体的热应力

从机械结构角度对机械夹持状态下吸收了高能激光束能量的磷酸二氢钾(KDP)晶体内部产生热应力的问题进行了研究。理论分析了KDP晶体吸收激光能量引起的温升,研究了机械夹持状态下KDP晶体内部热应力的生成机理。采用有限元方法对KDP晶体的温度分布和热应力分布进行了仿真计算,分析了夹持装置结构参数、预紧力、摩擦系数和弹性模量对热应力的影响。结果表明,夹持装置对KDP晶体的机械夹持作用是KDP晶体内部产生热应力的重要因素,热应力的大小与夹持装置的结构参数有关。     

KDP晶体相位匹配角理论预测模型及其验证分析

在高功率固体激光器的终端光学组件内, 大口径薄型KDP (KH₂PO₄)晶体的精密装配和校准是实现惯性约束核聚变的关键技术之一. 为了达到晶体在线安装高效高精度的要求, 需要测量高功率激光三次谐波转换效率达到最高时的晶体相位匹配角分布. 本文针对Ⅰ/Ⅱ类大口径薄型KDP晶体三次谐波转换的方式, 根据晶体的非线性光学属性获得了晶体不同位置相位匹配角之间的关系; 根据激光束在晶体内的传输路径分析得到了晶体面形、相位匹配角与激光三次谐波转换效率达到最高时 晶体最佳偏转角之间的相互关系. 在此基础上, 建立了Ⅰ/Ⅱ类KDP晶体相位匹配角的理论预测模型, 并利用实验进行了验证和分析. 实验结果表明, 晶体相位匹配角的预测值与实验值之差在10.0 μrad以内, 验证了Ⅰ/Ⅱ类KDP晶体相位匹配角理论预测模型的正确性, 为获得晶体全口径相位匹配角分布提供了简单、高效的预测方法.     

经纬仪主镜在支撑系统下的面形变化

为研究在重力作用下主镜支撑系统对经纬仪主镜处于不同工作角度时面形误差的影响,以600 mm口径主镜为研究对象,利用Abaqus软件分别建立了600 mm主镜在加工状态下和工作状态下的有限元支撑模型,并进行了重力变形分析,然后借助4D干涉仪对在不同支撑系统下的主镜进行相关的面形检测。实验结果表明,在吊带支撑系统和主镜室支撑系统下,主镜的自身面形误差RMS为16.18 nm和16.90 nm。利用有限元分析了理想状态的主镜在不同仰角工况下的面形误差,结合主镜自身的面形误差,计算得到了主镜面形误差在光轴由水平变化到竖直的过程中逐渐变大,其RMS最大为19.58 nm,表明该主镜室支撑系统具有良好支撑效果,可满足工程要求,同时也验证了主镜室支撑系统有限元理论模型的准确性。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.