Direct determination of traces of silver in mercury by voltammetry at the hanging mercury drop electrode in acetonitrile medium

A direct method for the determination of silver in mercury is described. The sample of mercury is introduced into the container of the hanging mercury drop electrode and the anodic voltammograms are recorded in a 0.1 M lithium perchlorate solution in acetonitrile. The anodic peak of silver obtained under these conditions is well separated from the mercury dissolution current. The peak height is proportional to silver concentration over the wide range 2 × 10^?6 mol dm^?3 (1.6 × 10^?6%) to at least 2.0 × 10^?2 mol dm^?3. No prior separation is needed; the procedure requires less than 20 min. The diffusion coefficient of silver in mercury was determined at several temperatures. It was found that silver in mercury does not form intermetallic compounds with copper, lead, thallium, cadmium, tin and bismuth.     

Voltammetric and chronoamperometric investigation of germanium amalgams: Part I. Properties of the homogenous amalgam

Using cyclic voltammetry and chronoamperometry with several anodic steps the deposition and particularly the oxidation of germanium from a HMDE was investigated within pH range 4–12 at Ge (IV) concentrations ranging from 4×10^?7M to 1×10^?4M in the absence of ligands capable to form the complex compounds with Ge(IV) in a solution. It was found that the initially formed product of electrodeposition is a homogeneous, usually supersaturated amalgam. Germanium from this amalgam oxidizes at about 1 V (vs. mercury sulphate reference electrode) or after some induction period, the length of which depends on concentration of Ge(0) in mercury, it begins to crystallize forming heterogenous germanium amalgam. Germanium from this heterogenous amalgam oxidizes in a separate voltammetric peak at more positive potentials. The solubility of germanium in mercury was evaluated on the basis of the oxidation current of homogenous amalgam and the value obtained is equal to (2±0.5)×10^?7M i.e. (1.1±0.3)×10^?7 wt. %. Applying the Stevens and Shain method the diffusion coefficient of germanium in mercury was found to be (1.32±0.1)×10^?5 cm² s^?1.     

Construction and Application of Flow Enzymatic Biosensor Based of Silver Solid Amalgam Electrode for Determination of Sarcosine

In this paper, the flow amperometric enzymatic biosensor based on polished silver solid amalgam electrode for determination of sarcosine in model sample under flow injection analysis conditions is presented. The biosensor works on principle of electrochemical detection of oxygen decrease during enzymatic reaction which is directly proportional to the concentration of sarcosine in sample. The whole preparation process takes about 3 h. The RSD of repeatability of 10 consecutive measurements is 1.6 % (c_sarcosine=1.0×10^?4 mol dm^?3). Under optimal conditions the calibration dependence was linear in the range 7.5×10^?6–5.0×10^?4 mol dm^?3 and limit of detection was 2.0×10^?6 mol dm^?3.     

Flow-injection spectrophotometric determination of chloride with an on-line solid mercury(II) thiocyanate minicolumn and bromide with a silver thiocyanate minicolumn

Flow-injection spectrophotometric procedures are described for the determination of chloride and bromide using on-line solid mercury(II) thiocyanate and silver thiocyanate minicolumns, respectively. The linear response ranges for chloride and bromide are 0.28 × 10^?4?8.5 × 10^?4 M and 0.38 × 10^?4?2.4 × 10^?4 M, respectively. The sample throughput for both systems is 100 h^?1. The lifetime of the minicolumns is 50 and 200 injections, respectively.     

Polarographic determination of glycine with a dropping copper amalgam electrode

The anodic oxidation of a dropping copper amalgam electrode in presence of dilute solutions of glycine in 0.50 M NaClO₄ has been studied. An anodic wave at ?0.28V (SCE) is observed, yielded by diffusion of glycinate anion in the solution towards the electrode surface. The wave-heights increase with the glycinate concentration (function of glycine concentration and pH value) until the anodic oxidation is controlled by the metal diffusion into mercury. The effect of pH is interpreted by attributing it to the depolarizer effects at glycinate anion even though the zwitterion is present in much larger concentrations. The applicability of anodic oxidation of a dropping copper amalgam electrode in the determination of glycine in the range of concentrations 10^?4–10^?2M with a rigorous control of pH (8.0<pH<10.5) is shown. The standard deviation of the proposed method is 4.1% and the minimum concentration determinable is in the 1×10^?4M range.     

Electrochemical Study of Moroxydine and its Voltammetric Determination with a Silver Amalgam Film Electrode

Moroxydine (Mor.) is an antiviral agent of biguanide structure. The paper presents a new silver amalgam film electrode (Hg(Ag)FE) for determination of Mor. in phosphate buffer, pH 6.2 (LOD=4×10^?9 mol L^?1, LOQ= 1×10^?8 mol L^?1) and in spiked urine using square wave adsorptive stripping voltammetry. It was found that the compound can act as an electrocatalyst not only at hanging mercury drop electrode but also at the Hg(Ag)FE. The electrode mechanism is connected with the hydrogen evolution reaction catalyzed by moroxydine. Adsorption of moroxydine at the mercury electrode was studied and special arrangements of molecules enabling electron transfer of the protonated form of moroxydine is suggested.     

The electrochemical stripping determination of tin in aqueous and nonaqueous media after its extraction

The anodic stripping voltammetric and chronopotentiometric determination of tin(IV) in aqueous and nonaqueous medium after its extraction using the rotating disc electrode made of glassy carbon with the mercury film was studied. The optimum composition of nonaqueous medium for the determination of tin is 0.2 M NaBr+5×10^?5M Hg²⁺ in 20 ml of the extract +30 ml of methanol. Tin(IV) was determined by anodic stripping voltammetry or chronopotentiometry down to the concentration 10^?7M. The selective determination of tin was studied. 10^?6M of tin(IV) was determined with an error ±4–5% even in the presence of metals: Co²⁺, Ni²⁺, Cd²⁺, Zn²⁺ (5×10^?3M), Ag⁺ and Pb²⁺ (5×10^?4M), Cu²⁺ (1.5×10^?4M), Sb³⁺ and Bi³⁺ (5×10^?5M).     

The cathodic stripping voltammetric determination of traces of iodide with a hanging copper amalgam drop electrode

A hanging copper amalgam drop electrode (HCADE) is used for the determination of traces of iodide by cathodic stripping voltammetry. The cathodic stripping peak of copper(I) iodide from the HCADE is better defined than that of mercury(I) iodide from a hanging mercury drop electrode. Optimum conditions and interferences are reported. With a 3-min deposition time at ?0.1 V vs. SCE, the calibration plot is linear up to 2 × 10^?6 mol dm^?3 iodide. The detection limit for iodide with the HCADE under voltammetric conditions is 4 × 10^?8 mol dm^?3; this is lowered to 8 × 10^?9 mol dm^?3 by using the differential pulse stripping technique.     

Silver based mercury film electrode: Part II. The influence of aging of electrode on the electrode processes of various metal ions

The cyclic voltammetric behaviour of 8 metal ions at solid silver amalgam electrodes prepared by aging of a thin silver based mercury film electrode (SBMFE) and by deposition of silver and mercury on platinum were investigated. It was established that such electrodes behave in relation to some metals (Pb, Bi, Sn) similarly as silver electrodes i.e. the cyclic curves obtained with these electrodes at concentration 10^?3M range show a prepeak-postpeak system corresponding to deposition and dissolution of the monolayer of deposit. On the other hand under the same conditions no prepeaks were observed for cadmium, zinc and thallium. In all cases investigated the heights of anodic stripping peaks were lower on curves obtained with aged SBMFE than on those obtained with fresh SBMFE having a mercury layer 1 μm thick.     

Determination of gold in geological samples by x-ray fluorescence spectrometry after extraction with tributyl phosphate

The behaviour of gold and elements impeding its x-ray fluorescence spectrometric (XRF) determination, namely zinc, lead and arsenic, was studied during their extraction from hydrochloric acid, nitric acid, and aqua regia solutions using tributyl phosphate as a solid extractant [SE(TBP)]. Extraction of gold from pulps after aqua regia leaching was found to be the most favourable approach for the quantitative and selective recovery of gold. The gold distribution ratio, D_Au, is ca. 10⁴ ml g^?1. For extraction from hydrochloric acid solutions the D_Au value also exceeds 10⁴ in the whole range of gold concentrations studied (10^?8?10^?4 M), but it decreases substantially with increasing extraction temperature, from 5 × 10⁵ ml g^?1 at 20°C to 9 × 10³ ml g^?1 at 70°C. An anomalously high distribution ratio of lead, D_Pb ≈ 10³ ml g^?1, was observed during extraction from hydrochloric solutions in the presence of chlorine. This could be explained by the formation of the chloro complexes of lead(IV). An XRF method for the determination of gold in natural samples was developed, which includes back-extraction of gold from SE(TBP) using a hot 0.025 M thiourea solution, providing a thin sample layer for secondary XRF. For 25 g of sample material the limit of determination is 10 ng g^?1 (10^?6%). The accuracy of the technique was checked using different reference materials. The results agreed within 10%.     

A nafion/crown ether film electrode and its application in the anodic stripping voltammetric determination of traces of silver

Glassy carbon electrodes are modified by coating with dicyclohexyl-18-crown-6 in Nafion-117. The electrode is used for a very sensitive anodic stripping voltammetric determination of silver. High sensitivity is obtained owing to the release of crown molecules from the silver-crown complex during the deposition. The detection limit is 2×10^?12 M after electrodeposition for 30 min. The recommended supporting electrolyte is 4×10^?3–7×10^?3 M potassium chloride in 0.01 M nitric acid with a deposition potential of ?0.30 V vs. SCE and a linear potential scan. Three typical calibration graphs were linear over the range 2×10^?11–1×10^?8 M for deposition times of 30, 20 and 8 min, respectively. The silver content of reagent-grade ammonium nitrate was found to be 0.48×10^?4% with a relative standard deviation of 3.7% (n=7) for parallel determinations.     

Voltammetric Determination of Nitronaphthalenes at a Silver Solid Amalgam Electrode

Abstract

Electrodes based on amalgam materials were re-introduced in electroanalytical chemistry in the year 2000, partially as reaction to unsubstantiated public fears of liquid mercury. In this publication, the voltammetric behavior of 1-nitronaphthalene and 2-nitronaphthalene was investigated at a mercury meniscus-modified silver solid amalgam electrode. The reduction mechanism in mixed neutral buffer-methanol medium includes the four-electron reduction to hydroxylaminoderivative followed by a two-electron reduction to the amine in acidic medium, similarly to mercury electrodes. In alkaline media, both compounds show the splitting of the main four-electron reduction peak typical for mercury electrodes in two new ones, the first one corresponding to a one electron reduction of the nitroderivative to the nitro radical anion, which was confirmed by microcoulometry. Using optimized conditions (differential pulse voltammetry, Britton-Robinson buffer pH 7.0 – methanol (9:1) medium) the calibration dependences are linear in the range of 2·10^?7 (4·10^?7) to 1·10^?4 mol L^?1 for 1-nitronaphthalene (2-nitronaphthalene). After preconcentration of the analytes from drinking and river water samples using solid phase extraction the limit of determination was lowered to ～3·10^?8 mol L^?1.     

Intermetallic compounds and the determination of copper and zinc by anodic stripping voltammetry

The intermetallic CuZn compounds produced during the simultaneous deposition of copper and zinc at a preformed mercury film electrode were studied. Over a wide range of metal concentration ratios, the real concentrations of metals in the amalgam were calculated from the peak areas obtained by anodic stripping voltammetry. The results indicate the formation of CuZn (insoluble) and CuZn2 (soluble) compounds with K_so=5×10^?4 and β₂=100, respectively. The electrodeposition potential of ?0.85 V vs. SCE for the reduction of copper in presence of zinc is confirmed as correct.     

Sensitive and selective determination of mercury by differential pulse stripping voltammetry after accumulation of mercury vapour on a gold plated graphite electrode

 A selective and sensitive method is proposed for the determination of mercury by anodic stripping voltammetry after its preconcentration from the gas phase. Mercury from the sample solution is reduced to elemental Hg by SnCl₂ and volatilized by the bubbles of a carrier gas. The gas containing mercury vapour is dried and passed through a capillary onto a gold coated graphite electrode. An anodic stripping voltammogram is recorded from 0.1 mol/l HClO₄+3×10^-3 mol/l HCl solution. The calibration curve is linear from 1×10^-9 to 4×10^-8 mol/l Hg(NO₃)₂. The absolute detection limit is 0.46 ng Hg. The relative standard deviations for 4×10^-9 mol/l and 2×10^-8 mol/l Hg(NO₃)₂ are 9.8% and 6.1%, respectively (n=5). Received: 18 December 1995/Revised: 16 April 1996/Accepted: 20 April 1996     

A Novel Voltammetric Method for the Determination of Maleic Acid Using Silver Amalgam Paste Electrode

An efficient voltammetric method was developed for the determination of maleic acid at a silver amalgam paste electrode (AgA‐PE) in Britton–Robinson buffer pH 2.0. The experimental parameters, such as pH of Britton–Robinson buffer, type of the supporting electrolyte and activation of the electrode surface were optimized. Under the optimal conditions, a linear response was observed over the 2×10^?6–1×10^?4 mol L^?1 maleic acid concentration range, determination limit being 5×10^?7 mol L^?1. A highly stable response, with a relative standard deviation (RSD) of 1.6% for 45 repetitive measurements of 1×10^?4 mol L^?1 maleic acid showed that there was no apparent surface passivation indicating the suitability of the method. The method was successfully applied for direct determination of maleic acid in drinking and river water.     

Sensitive and selective determination of mercury by differential pulse stripping voltammetry after accumulation of mercury vapour on a gold plated graphite electrode

A selective and sensitive method is proposed for the determination of mercury by anodic stripping voltammetry after its preconcentration from the gas phase. Mercury from the sample solution is reduced to elemental Hg by SnCl₂ and volatilized by the bubbles of a carrier gas. The gas containing mercury vapour is dried and passed through a capillary onto a gold coated graphite electrode. An anodic stripping voltam-mogram is recorded from 0.1 mol/1 HClO₄ + 3 × 10⁻³ mol/1 HCl solution. The calibration curve is linear from 1 × 10⁻⁹ to 4 × 10⁻⁸ mol/1 Hg(NO₃)₂. The absolute detection limit is 0.46 ng Hg. The relative standard deviations for 4 × 10⁻⁹ mol/1 and 2 × 10⁻⁸ mol/1 Hg(NO₃)₂ are 9.8% and 6.1%, respectively n = 5).     

Application of Non‐Stop‐Flow Differential Pulse Voltammetry at a Tubular Detector of Silver Solid Amalgam for Electrochemical Determination of Lomustine (CCNU)

An application of the flow differential pulse voltammetry with tubular detector based on silver solid amalgam for determination of antineoplastic drug lomustine in pharmaceutical preparations is presented. The highest sensitivity was obtained in [0.10 mol dm^?3 MES; 2.00 mol dm^?3 NaCl; pH 6.0]:EtOH (9 : 1) with flow rate 0.50 mL min^?1, and the magnitude of the modulation amplitude ?0.070 V. The calibration dependence was linear in the range 1×10^?6–1 × 10^?4 mol dm^?3 (R²=0.999). The limit of detection was 1.5×10^?7 mol dm^?3. This method was successfully used for determination of lomustine in real samples of chemotherapy drug CeeNU Lomustine 40 mg.     

Anodic stripping voltammetry at a nickel-based mercury film electrode

The electrochemical properties of the nickel-based mercury film electrode (Ni-MFE) were investigated with respect to application of the electrode in the anodic stripping voltammetry (a.s.v.) of heavy metal ions. The hydrogen overpotential at the Ni-MFE is higher than those at MFEs based on other metals, and high enough to get quantitative a.s.v. peaks of lead and cadmium. The mercury film of the Ni-MFE is stable both mechanically and chemically; a.s.v. peaks at a Ni-MFE which had been used fifty times within 300 h after its preparation were identical with those at the freshly prepared electrode. With the Ni-MFE, 5 × 10^?10–10^?7 M lead(II) and 2 × 10^?10–10^?7 M cadmium(II) in the solution can be determined with relative standard deviations of 11 and 12%, respectively. These results are comparable to those obtained by a.s.v. at an in situ mercury-plated g]assy carbon electrode.     

Electrode Modified with Langmuir–Blodgett (LB) Film of Calixarenes for Preconcentration and Stripping Analysis of Hg(II)

A new type of current sensor, Langmuir–Blodgett (LB) film of calixarene on the surface of glassy carbon electrode (GCE) was prepared for determination of mercury by anodic stripping voltammetry (ASV). An anodic stripping peak was obtained at 0.15 V (vs. SCE) by scanning the potential from ?0.6 to +0.6 V. Compared with a bare GCE, the LB film coated electrode greatly improves the sensitivity of measuring mercury ion. The fabricated electrode in a 0.1 M H₂SO₄+0.01 M HCl solution shows a linear voltammetric response in the range of 0.07–40 μg L^?1 and detection limit of 0.04 μg L^?1 (ca. 2×10^?10 M). The high sensitivity, selectivity, and stability of this LB film modified electrode demonstrates its practical application for a simple, rapid and economical determination of Hg²⁺ in a water sample.     

Voltammetric Determination of Acibenzolar‐S‐Methyl Using a Renewable Silver Amalgam Film Electrode

Acibenzolar‐S‐methyl (ASM) is a novel fungicide applied for crop protection. A renewable silver amalgam film electrode was used for the determination of ASM in pH 3.4 Britton? Robinson buffer using square wave adsorptive stripping voltammetry (SW AdSV). The parameters of the method were optimized. The electroanalytical procedure made possible to determine ASM in the concentration range of 5×10^?8–3×10^?7 mol L^?1 (LOD=4.86×10^?9, LOQ=1.62×10^?8 mol L^?1). The effect of common interfering pesticides and heavy metal ions was checked. The validated method was applied in ASM determination in spiked water samples.