共查询到20条相似文献,搜索用时 15 毫秒
1.
The performance of a microprocessor-controlled polarograph with a pressurized mercury electrode system has been evaluated. For the technique of differential pulse polarography, the theory applying to the pressurized mercury electrode in the dropping mercury format is shown to be the same as for a conventional gravity-controlled mercury electrode system. At the short drop times used (0.2–0.4 s), faradaic distortion terms are shown to influence the shape of the observed differential pulse polarograms. A substantial decrease in sensitivity is also incurred in using these short drop times, compared with the longer ones generally employed in differential pulse polarography. Results for differential pulse anodic stripping conform to the usual expectations. 相似文献
2.
《Journal of Electroanalytical Chemistry》1986,198(1):27-35
Differential pulse anodic stripping voltammetry at the wall-jet electrode requires careful consideration of flow conditions in the plating and stripping steps as well as the electrochemical parameters such as modulation amplitude and clock period. A systematic appraisal of the various factors affecting the differential pulse stripping current is described. Although the stripping current depends on the stripping solution flow rate, the differential pulse mode is preferred to dc stripping because of its greater sensitivity and the abililty to obviate oxygen interference. 相似文献
3.
The electrochemical oxidation of a series of thils on the surface of a nickel oxide electrode is investigated in a flow-injection system. The background electrolyte is 0.1 M NaOH containing 5 × 10?65 M NiSO4 and the injected sample volume is 25 μl. The net peak current is observed at +0.46 V vs. SCE for thiols dissolved in pH 3.0 phthalate buffer. The upper limit of linearity extends to 10?3 M. The relative standard deviation for ten replicate measurements on 10?4 M ethanethiol is 1.6%. The lower limits of detection are between 3 × 10?5 and 2 × 10?4 M for a series of thiols. Peak shapes indicate that thiolate oxidation mediated by a higher oxide layer on the electrode rather than mass transport or adsorption / rearrangement is the rate-determining step. 相似文献
4.
The surface activity of xanthine (Xan) and xanthosine (Xano) at a hanging mercury drop electrode (HMDE) was studied using out-of-phase ac and cyclic dc voltammetry. The results show that Xan and Xano were strongly adsorbed and chemically interacted with the charged mercury surface, which is the prerequisite step for applying the cathodic adsorptive stripping voltammetric determination of such biologically important compounds. Differential pulse cathodic adsorptive stripping voltammetry (DPCASV) and square-wave cathodic adsorptive stripping voltammetry (SWCASV) were applied for the ultratrace determination of Xan and Xano compounds. Moreover, a rapid and sensitive controlled adsorptive accumulation of Cu(II) complexes of both compounds provided the basis of a direct stripping voltammetric determination of such compounds to submicromolar and nanomolar levels. Operational and solution conditions for the quantitative ultratrace determination of Xan and Xano were optimized in absence and presence of Cu(II). The calibration curve data were subjected to least-squares refinements. The effects of several types of inorganic and organic interfering species on the determination of Xan or Xano were considered. 相似文献
5.
A data-aquisition system for fast micro-electrode voltammetry is described. The computer-controlled system can be used at scan rates up to 10 000 V s?1. The response of the system was examined by monitoring fast electrochemical reactions. A heterogeneous rate constant of 1.1 cm s?1 was obtained for oxidation of ferrocene in acetonitrile. Oxidation of anthracene in acetonitrile was also studied; the enthalpy of activation was evaluated as 13 kJ mol?1 for the reaction of the anthracene radical cation with acetonitrile. 相似文献
6.
The behaviour of the copper complexes of glycyl-L-histidyl-glycine (GHG) was investigated using cyclic voltammetry and differential pulse voltammetry after their adsorptive accumulation on the surface of a hanging mercury drop electrode (HMDE). The nature of the observed cathodic and anodic peaks was established and optimum conditions were found for the differential pulse cathodic stripping voltammetric detemination of GHG at the 1 x 10(-8)M concentration level using adsorptive accumulation at -0.20 V vs. Ag/AgCl reference electrode and the cathodic stripping peak around -0.4 V (pH 8.3). This peak corresponds to the reduction of the Cu(I)-GHG complex formed at the HMDE surface as an intermediate in the reduction of Cu(II)-GHG to Cu(O)amalgam. 相似文献
7.
In this work, we describe an automated stripping analyzer operating on a hybrid flow-injection/sequential-injection (FIA/SIA) mode and utilizing a bismuth-film electrode (BiFE) as a flow-through sensor for on-line stripping voltammetry of trace metals. The instrument combines the advantages of FIA and SIA and is characterised by simplicity, low-cost, rapidity, versatility and low consumption of solutions. The proposed analytical flow methodology was applied to the determination of Cd(II) and Pb(II) by anodic stripping voltammetry (ASV) and of Ni(II) and Co(II) by adsorptive stripping voltammetry (AdSV). The steps of the rather complex experimental sequence (i.e. the bismuth-film formation, the analyte accumulation, the voltammetric stripping and the electrode cleaning/regeneration) were conducted on-line and the critical parameters related to the respective analytical procedures were investigated. In ASV, for a accumulation time of 180 s the limits of detection for Cd(II) and Pb(II) were 2 and 1 μg l−1, respectively (S/N = 3) and the relative standard deviations were 5.3% and 4.7%, respectively (n = 8). In AdSV, for a total sample volume of 1000 μl, the limits of detection for Ni(II) and Co(II) were 1 μg l−1 (S/N = 3) and the relative standard deviations were 5.5% and 6.2%, respectively (n = 8). The measurement frequency ranged between 15 and 20 stripping cycles h−1. The results indicate that the BiFE is well suited as a flow-through detector for on-line stripping analysis and, by virtue of its low toxicity, can serve as a viable alternative to mercury-based flow-through electrodes. 相似文献
8.
Summary The determinations of phenol is studied by means of a carbon paste electrode modified with 10% sepiolite using DPV. A 10 min preconcentration step was performed at pH 1.5 under open circuit conditions. Measurements were made in another cell by DPV with E=100 mV (sweep rate = 40 mV/s) in 0.02 mol/l KNO3 medium at pH 2. Detection limits (3 ) of 30 ng/ml were achieved for determinations in orange, lemon and cola drinks.
Phenolbestimmung durch Differentialpuls-Voltammetrie mit einer Sepiolit-modifizierten Kohlepaste-Elektrode相似文献
9.
Optimum conditions for the use of the bare glassy carbon electrode (GCE) are reported. Linear calibration graphs are obtained in the range 5 × 10-7–3.5 × 10-5 M copper(II). The detection limit for copper(II) is 5.9 × 10-9 M at pH 4.5 and 3.3 × 10-8 M at pH 6.5. 相似文献
10.
Differential pulse anodic-stripping voltammetry at a stationary mercury-film electrode with the solution stirred during the deposition step has been investigated. The sensitivity achieved by using such a simple set-up is similar to that obtained with a mercury-film rotating disk electrode. The effects of various experimental parameters on the peak current are described. Lead and cadmium were used as test systems, and gave detection limits of around 1 x 10(-10)M with 5-min deposition times. 相似文献
11.
Complexes of osmium tetroxide with nitrogen ligands were developed and used in our laboratory as probes of the DNA structure. Here, we show that the complex of osmium tetroxide with 2,2'-bipyridine (Os,bipy) can be used for modification and electrochemical detection of proteins at neutral pH. Salmon luteinizing hormone (SLH) containing two tryptophan (Trp) residues and human luteinizing hormone (HLH) containing one Trp were modified by Os,bipy and measured by differential pulse adsorptive stripping voltammetry (DPAdSV) at a hanging mercury drop electrode (HMDE). The intensity of the DPAdSV catalytic signals corresponded to the number of Trp residues in the peptide molecule. Decreasing pH of the background electrolyte from 6.6 to 3.8 led to the increase of DPAdSV signals, suggesting that at pH 3.8, the DPAdSV detection limit might be well below 1 ng/ml. Our results suggest that Os,bipy is potentially useful for chemical modification of proteins. 相似文献
12.
13.
Butylated hydroxyanisole (BHA) and other tocopherols are shown to accumulate very strongly onto carbon paste, with the surface species retaining their characteristic electroactivity. This accumulation serves as a preconcentration step which improves the voltammetric measurement with respect to the sensitivity and selectivity. After 5-min preconcentration, a detection limit near 2 × 10?8 M BHA is obtained. Enhanced selectivity is achieved if the electrode is transferred into an electrolytic blank solution between the preconcentration and measurement steps. The accumulated analyte can then be quantified in the presence of a 103-fold amount of a solution species with similar redox potential. The differential pulse stripping response is evaluated with respect to concentration dependence, reproducibility, preconcentration period, detection limit, and other variables. The preconcentration/medium exchange approach is exploited for selective detection of BHA in a flow injection system. Applicability to various real samples is illustrated. 相似文献
14.
The application of subtractive mode differential pulse anodic stripping voltammetry (SDPASV) at a stationary mercury-coated glassy carbon electrode for the analysis of labile Zn(II), Cd(II), Pb(II) and Cu(II) is described. It is shown that the method has an improved sensitivity to Cu(II) owing to elimination of high background currents normally encountered in normal mode DPASV at the TFME. The sensitivity limits of the present method to Cd(II) and Cu(II) is estimated to be 0.025 and 0.067 ppb respectively, when a 2 min deposition time is used. It is suggested that the high sensitivity of the method coupled to the relative simplicity of the stationary electrodes could make the method useful in environmental and natural water studies. 相似文献
15.
建立了快速测定盐酸金霉素(CTC)的方法。通过NaBH4还原法制备纳米银(AgNPs)溶胶,并利用X射线衍射和紫外-可见光谱进行表征。将制备好的AgNPs滴涂到玻碳电极表面制备修饰电极(AgNPs/GCE),研究了CTC在AgNPs/GCE上的电化学行为及伏安法测定,优化了缓冲溶液和pH等检测条件。结果表明,CTC在pH 3.3的柠檬酸-NaOH-HCl缓冲溶液中检测效果最佳。CTC在AgNPs/GCE上发生2个电子和2个质子的不可逆电化学氧化反应,且反应受吸附控制。最佳条件下,CTC的氧化峰电流与其浓度呈现良好的线性关系,线性范围为0.5~100μmol/L,检出限为0.14μmol/L。该修饰电极可用于河水样品检测。 相似文献
16.
Pedro Hernandez Jose Vicente Lucas Hernandez 《Fresenius' Journal of Analytical Chemistry》1989,334(6):550-553
Summary A method is described for the determination of tetramethrin (neo-pynamin) by differential pulse voltammetry with a carbon paste electrode modified with 10% (w/w) sepiolite. Preconcentration was carried out under open circuit conditions in 0.01 mol/l acetic acid/potassium acetate medium at pH 5.3 over 10 min, recording the voltammogram in 0.01 mol/l of KH2PO4/K3PO4 at pH 12. This led to the appearance of a peak at –1.32 V against SCE at 40 mVs–1 and a pulse amplitude of 100 mV. Under these conditions determination limits of 45 ng ml–1 were achieved. The method was applied to the determination of tetramethrin in soil and water samples.
Bestimmung von Tetramethrin (Neo-Pynamin) durch Differential-Puls-Voltammetrie unter Verwendung einer mit Sepiolit modifizierten Kohlepaste-Elektrode相似文献
17.
A differential pulse voltammetric (DPV) procedure is proposed for the speciation of aluminium in natural waters using Pyrocatechol Violet chemically modified electrodes (PCV-CMEs). This novel speciation idea is based on the selective determination of different AlIII forms under two pH conditions. The labile monomeric Al fraction (mainly inorganic Al) is analysed at pH 4.8 (0.20 mol dm(-3) NaOAc-HOAc) and the total monomeric Al fraction is analysed at pH 8.5 (0.20 mol dm(-3) NH3.H2O-NH4Cl). The difference is thought to be caused by the weak competition ability of PCV to sequester AlIII from AlIII-natural organic matter complexes. This sensitive and simple speciation method has been applied successfully to aluminium speciation in natural waters sampled from different regions of China. Five fractions are measured directly or indirectly: (i) labile monomeric Al; (ii) total monomeric Al; (iii) acid reactive Al; (iv) non-labile monomeric Al; and (v) acid soluble Al. The results are in satisfactory agreement with those obtained by Driscoll's 8-hydroxyquinoline extraction-ion exchange method. 相似文献
18.
JIN Bao-Kang ZHANG Jian-Rong ZHANG Zu-XunDepartment of Chemistry Nanjing University Nanjing Jiangsu China 《中国化学》1996,14(4):338-347
An analytical expression describing voltammetric behaviors responses at microdisk electrode for various diffusion conditions and degrees of reversibility is reported in this paper. Results of theoretical calculation made it possible to use cyclic voltammetry to evaluate heterogeneous rate constants under intermediate diffusion conditions. At relatively low scan rate, the distortion of current-voltage can be reduced due to small iR drops and charging current. The effects of transfer coefficient, a, kinetic parameter, (=k0r/4D), and switching potential, s, on potential peak separation are discussed in detail. The relationship obtained in this paper between potential peak separation and \ is in good agreement with that in Ref. 14, whose authors have got their results by using digital simulation technique. After the experiment of Fe(CN)64- oxidation, k0 and a were obtained by the theory of this paper. The result agrees with that in Ref. 19. 相似文献
19.
The redox characteristics of the drug domperidone at a glassy-carbon electrode (GCE) in aqueous media were critically investigated
by differential-pulse voltammetry (DPV) and cyclic voltammetry (CV). In Britton–Robinson (BR) buffer of pH 2.6–10.3, an irreversible
and diffusion-controlled oxidation wave was developed. The dependence of the CV response of the developed anodic peak on the
sweep rate (ν) and on depolizer concentration was typical of an electrode-coupled chemical reaction mechanism (EC) in which an irreversible
first-order reaction is interposed between the charges. The values of the electron-transfer coefficient (α) involved in the rate-determining step calculated from the linear plots of E
p,a against ln (ν) in the pH range investigated were in the range 0.64 ± 0.05 confirming the irreversible nature of the oxidation peak. In
BR buffer of pH 7.6–8.4, a well defined oxidation wave was developed and the plot of peak current height of the DPV against
domperidone concentration at this peak potential was linear in the range 5.20 × 10−6 to 2.40 × 10−5 mol L−1 with lower limits of detection (LOD) and quantitation (LOQ) of 6.1 × 10−7 and 9.1 × 10−7 mol L−1, respectively. A relative standard deviation of 2.39% (n = 5) was obtained for 8.5 × 10−6 mol L−1 of the drug. These DPV procedures were successfully used for analysis of domperidone in the pure form (98.2 ± 3.1%), dosage
form (98.35 ± 2.9%), and in tap (97.0 ± 3.6%) and wastewater (95.0 ± 2.9%) samples. The method was validated by comparison
with standard titrimetric and HPLC methods. Acceptable error of less than 3.3 % was also achieved.
Figure In aqueous media at pH 7.6- 8.4, the DPV and cyclic voltammetry of the drug domperidone (I) at GCE showed an irreversible
and diffusion controlled oxidation wave. The values of the electron transfer coefficient (α) involved in the rate determining
step were found in the range 0.64± 0.05 confirming the irreversible nature of the peak. The analysis of the drug in pure form
and in wastewater samples was successfully achieved 相似文献