Ligand exchange in the complexone-porphyrin macrocycle system in reactions of copper(II) ethylenediaminetetraacetate with porphyrins and phthalocyanines

Complexation between 5,10,15,20-tetraphenylporphine H₂TPP and tetra(tert-butyl)phthalocyanine H₂(t-Bu)₄Pc with copper(II) ethylenediaminetetraacetate in DMSO was studied by spectrophotometry. The kinetic parameters of the reaction were calculated and the mechanism of ligand exchange in the complexone-porphyrin macrocycle system was proposed. The reactivities of H₂TPP and H₂(t-Bu)₄Pc in reactions with copper ethylenediaminetetraacetate and some other copper chelate complexes were compared.     

Extraction and spectrophotometric determination of cobalt(ii) with 2-thenoyltrifluoroacetone

The rapid extraction and simultaneous spectrophotometric determination of mg amounts of cobalt(II) by means of 2-thenoyltrifluoroacetone is described. The yellow cobalt(II)-TTA chelate solution in acetone-benzene obeys Beer's law at 430 mμ over the range 12 to 51 μg of cobalt(II) per ml. At pH 5.1–6.8 a single extraction with 0.15 M TTA in acetone is satisfactory. The system is stable for 96 h. Silver, zirconium, strontium, thorium, zinc, lead(II) and mercury(II) do not interfere.     

Spectrophotometric study of n,n'-bis(m-sulphobenzyl)dithio-oxamide as a reagent for nickel(II)

N,N'-Bis(m-sulphobenzyl) dithiooxamide forms a water-soluble intensely red chelate with nickel-(II) in buffered solutions at pH 10, A 1 Ni : 1R complex is obtained. The absorption maximum of the complex lies at 500 mμ, where the absorbance of (SB)₂DTO is negligible. The molar extinction coefficient is ca, 6962. Beer's law is obeyed over the range from 0.5 μg to 50 μg per ml.     

Novel mercury(II) complexes of meso-tetraphenylporphyrin and N-methylporphyrins

Treatment of meso-tetraphenylporphyrin, H₂TPP, with just over one equivalent of mercury(II) acetate in methylene chloride-THF gives mercury(II) meso-tetraphenylporphyrin, HgTPP. With excess of mercury(II) acetate, H₂TPP and HgTPP afford a novel dimetallic mononuclear porphyrin, AcOHgTPPHgOAc. In contrast, HgTPP reacts with mercury(II) chloride to give the chloro-analogue, ClHgTPPHgCl, but there is no reaction between H₂TPP and mercury(II) chloride. Demetallation of HgTPP in methylene chloride containing small amounts of hydrogen chloride proceeds via the dimetallic compound, ClHgTPPHgCl, to give free base HTPP. The reaction rate is dependent upon acid concentration suggesting that the rate determining step is protonation, but dilution causes no decrease in the rate; a mechanism which invokes the intermediacy of monohydrogen-meso-tetraphenylporphyrinatomercury(II) chloride, H(TPP)HgCl, in the formation of ClHgTPPHgCl and in its subsequent decomposition into H₂TPP, is proposed.N-Methylporphyrins react with mercury(II) acetate in methylene chloride-tetrahydrofuran to give the corresponding N-methylporphyrinatomercury(II) acetates, Me(P)HgOAc.     

Electrogenerated chemiluminescence. XVI. ECL of palladium and platinum α,β,γ,δ-tetraphenylporphyrin complexes

The electrochemistry of the Pt(II) and Pd(II) complexes with α,β,γ,δ-tetraphenylporphin (TPP) in dichloromethane solutions containing 0.1 M tetra-n-butylammonium perchlorate is characterized by one-electron transfers to form both oxidized and reduced species. The electron transfer reactions between these electrogenerated species lead to the emission of light. The radiating species has been identified as the lowest triplet state of the Pt(TPP) or Pd(TPP) by comparison with results of previous spectroscopic studies.     

Thermal degradation behaviour of some metal chelate polymer compounds with bis(bidentate) ligand by TG/DTG/DTA

Seven novel divalent transitional metal chelate polymers compounds (commonly known as chelate compounds or metal coordination complexes or polymer complexes) have been characterized by thermogravimetry (TG), differential thermal gravimetry (DTG) and differential thermal analysis (DTA) methods. Thermal decomposition behaviour of Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) polymers with terphthaoyl-bis(p-methoxyphenylcarbamide) has been investigated by thermogravimetric analysis (TGA) at heating rate 10 °C min^?1 under nitrogen atmosphere. TG/DTA of chelate compounds were shown to be a stable compound against thermal decomposition which was measured on the basis of final decomposing temperature, but it is observed in some curves that decomposition takes place at low temperature due to the lattice water, which is always placed at outer coordination sphere of the central metal ion. The presence of both lattice and coordinated water were noteworthy investigated in Co(II), Ni(II) and Cu(II) chelate polymer compounds, whereas lattice water found in Zn(II), Cd(II) and Hg(II). However, Mn(II) showed only coordinated water. Thermal stabilities for release of lattice water, coordinated water and organic moiety that occur in sequential decomposition of chelate compounds are explained on the basis of ionic size effect and electronegativity. The processes of thermal degradation taking place in seven chelate polymers were studied comparatively by TG/DTG/DTA curves which indicating the difference in the thermal decomposition. Coats–Redfern integral method is used to determine the kinetic parameters for the successive steps in the decomposition sequence of TG curves. Scanning electron microscope images of some chelate polymers were shown in previous publication revealed that particle sizes of chelate polymers were found to be of nanomaterial level therefore, resulting chelate compounds might be called as nanomaterial.     

Spectrophotometric determination of cadmium with uramyldiacetic acid

A procedure for the determination of cadmium(II) by uv spectrophotometry is proposed. This metal reacts at pH 6 with uramyldiacetic acid (UDA) to give a complex with a maximal absorbance at 265 nm and follows Beer's law in the range 0.12–3.6 μg Cd(II)/ml, the optimal interval being from 0.6 to 3.3 μg Cd(II)/ml. The sensitivity is 0.011 μg cm^?2. Through this study the stoichiometry of the chelate compound, interfering elements, and the reproducibility of the method were evaluated. The method has been applied to the determination of cadmium in biological samples and a white metal.     

Study on the Solid Phase Extraction of Hg(II)‐ABR Chelate with C18 Disks and its Application to the Determination of Mercury in Tobacco and Tobacco Additives

A highly sensitive, selective and rapid method for the determination of mercury based on the rapid reaction of mercury(II) with 5‐(p‐aminobenzylidene)‐rhodanine (ABR) and the solid phase extraction of the colored chelate with C₁₈ disks has been developed. In the presence of pH = 3.5 sodium acetate‐acetic acid buffer solution and Emulsifier‐OP medium, ABR reacts with mercury(II) to form a red chelate of a molar ratio 1:2 (mercury to ABR). This chelate was enriched by the solid phase extraction with C₁₈ disks and eluted the retained chelate from the disks with dimethyl formamide (DMF). The enrichment factor of 50 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.16 × 10⁵ L.mol^?1.cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01?3 μg/mL in the measured solution. The relative standard deviation for eleven replicated samples of 0.01 μg/mL level is 1.83%. This method was applied to the determination of mercury in tobacco and tobacco additives with good results.     

An extraction-spectrophotometric determination of palladium with 4-(2-pyridylazo)resorcinol in the presence of diphenylguanidine

A new, sensitive spectrophotometric determination of palladium has been developed, based on the extraction of the red Pd(II) chelate with 4-(2-pyridylazo)resorcinol in the presence of N,N′-diphenylguanidine into n-butanol; the sensitivity of the method according to Sandell is S = 1.12 μg cm^?2, ?₅₃₀ = 9.4 × 10⁴ liters mol^?1 cm^?1, and palladium can be determined at concentrations from 0.21 to 1.91 μg ml^?1.     

In vivo formation of Cu(DDC)2 complex induced by nanomedicine for mesothelioma chemotherapy

The copper(II) diethyldithiocarbamate (Cu(DDC)₂) complex exhibited excellent inhibition to cancer cells. The usual administration is intravenous injection for disulfram and oral for copper. A new strategy was reported to improve the administration efficiency of the Cu(DDC)₂ drug. Poly(lactide-co-glycolide) (PLGA) nanoparticles were used to trap disulfram and copper gluconate separately, the two types of drug loaded nanoparticles were injected in mesothelioma-bearing nude mice via intraperitoneal injection. The in vivo formation of Cu(DDC)₂ complex was induced by disulfiram and Cu²⁺ released from PLGA nanoparticles. This strategy avoided many obstacles in the use of Cu(DDC)₂ complex as chemotherapeutic and exhibited excellent anticancer activity to mesothelioma.     

Interaction of porphyrins with adenine and adenosine complexes. Effect of a metal nature

Reactions of complex formation of 5,10,15,20-tetraphenylporphine (H₂TPP) and tetra-tert-butylphthalocyanine (H₂(t-Bu)₄Pc) with adenine and adenosine complexes of d-metals in DMSO and ethanol are studied. It was found that H₂TPP reacts with Cu(II) and Hg(II) adeninates and adenosinates in DMSO, but does not react with Zn(II), Co(II), and Cd(II) adeninates and adenosinates (with both bridging and monodentate type of the ligand coordination). H₂(t-Bu)₄Pc enters the complex formation reaction with adeninates and adenosinates of all studied metals in DMSO at almost equal rates. The states of adenine and adenosine complexes of different d-metals in DMSO and ethanol are proposed on the basis of kinetic data obtained.     

Structure and behavior of organic analytical reagents : Heats and entropies of formation of several divalent metal chelates of 2- and 4-methyl-8-hydroxyquinoline1

The Calvin-Bjerrum titration technique for the determination of chelate formation constants has been applied to the Cu(II), Ni(II), Co(II), Zn(II) and Mn(II) chelates of 2- and 4-methyl-8-hydroxyquinoline. Measurements were made at several temperatures in order to evaluate ΔH and ΔS values of chelation. The results obtained were interpreted in terms of steric hindrance of the 2-methyl group. In all cases the heats of formation of the chelates of 2-methyl-8-hydroxyquinoline were remarkably morepositive than those for the corresponding chelates of 4-methyl-8-hydroxyquinoline. This large difference in the strengths of the metal-chelate bonds is apparently due to the hindrance of the methyl groups which prevent the close grouping of the two reagent molecules around the metal in chelates of 2-methyl-8-hydroxyquinoline. The lower bond strength in chelates of 2-methyl-8-hydroxy-quinoline is partially compensated by a relatively larger entropy of formation. This is attributed to decreased solvent chelate interaction caused by the shielding of the polar O, N, and metal atoms by the 2-methyl groups. The determination of chelate fortmation constants of 2-phenyl-8-hydroxyqumoline has been carried out to further extend our study of steric effects in metal chelates.     

DFT quantum-chemical calculations of molecular structures for template heteroligand (5757)macrocyclic M(II) chelates of 3<Emphasis Type="Italic">d</Emphasis> elements with a 16-membered macrocyclic ligand and Br<Superscript>–</Superscript> ions

The geometric parameters of Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Zn(II) (5757)macrocyclic complexes with the NSSN-coordination of the donor sites of the chelant, which can be generated in template processes in M(II)–N-methylthiocarbohydrazide–hexanedione-2,5 systems and in the subsequent reaction of the newly formed metal chelate with 1,2-di(bromomethyl)benzene, have been calculated by the OPBE/TZVP functional density theory (DFT) hybrid method using the Gaussian09 program package. The 5-membered chelate ring is strictly planar in none of the complexes,. In all complexes (except for the Co(II) complex), 5-membered chelate rings are identical to each other. Both 7-membered chelate rings generated by the template links have a pronounced non-coplanarity. The bond angles between M–Br bonds are not 180° in any one of the complexes studied, although approaching this value.     

A spectrometric,separation and voltammetric study of the complexation reactions of bromazepam with iron(ii),copper(ii) and cobalt(ii)

Bromazepam, in the form of a cationic iron(II) chelate, can be determined spectrophotometrically at 588 nm with a limit of detection of ca. 10^-6 M. When this chelate is ion-paired with perchlorate, it can be extracted into organic solvents such as 1,2-dichloroethane and 4-methyl-2-pentanone, and determined by atomic absorption spectrometry with a limit of detection of 1.5 × 10^-5 M bromazepam at the iron resonance 248.3-nm line. Ion-pairs involving the Fe(II), Cu(II) and Co(II) chelates and perchlorate can be separated by h.p.l.c. using a C₁₈ reverse-phase column and a mobile phase of 4:1 water—methanol, with a u.v. detector at 242 nm. This approach allowed for the determination of iron(II) ions in aqueous solution with a limit of detection of 10^-8 M. The h.p.l.c. method could also be used to quantify bromazepam spiked in plasma in the concentration range 1–10 μg ml^-1, following extraction of bromazepam from plasma and subsequent formation of the iron(II) ion-pair. Copper(II) forms a labile chelate with bromazepam in pH 4.8 acetate buffer which, when subjected to differential pulse voltammetry at the hanging mercury drop electrode, gives rise to a catalytic phenomenon which can be utilised for the determination of bromazepam in the concentration range 10^-5–10^-9 M.     

铜(II)/明胶(酶解明胶)络合物的制备及其络合形态的探讨

许多金属元素对于生物体是必需的,Ｎａ、Ｋ、Ｍｇ、Ｃａ、Ｍｎ、Ｆｅ、Ｃｏ、Ｃｕ、Ｍｏ和Ｚｎ在人体中的含量约３％;各种金属离子在生物体中具有不同的作用,其功能是很复杂的．铜在生物体内主要是进行氧化还原反应,起输送氧气和电子载体的作用．如果人体内缺乏铜,则...     

An integrated reaction-retention and spectrophotometric detection flow system for the determination of nickel

An integrated flow-through photometric sensor for the determination of nickel in real samples of various origins has been developed. The sensor is based on the reaction of Ni(II) with 1-(2-pyridylazo)-2-naphthol (PAN) immobilized on a cationic resin which was placed in a flow-cell using a spectrophotometer tuned at 566 nm as detector. The Ni(II) ion from the sample injected into the carrrier stream (pH = 5.0) of a monochannel continuous flow system reacts with the immobilized chromogenic reagent to form a red chelate which remains on the active solid support and generates the analytical signal. When this reached its maximum value the Ni(II)-PAN chelate was destroyed using 1 M H₂SO₄ as eluents, leaving the sorbed PAN untouched. The response of the sensor was linear in the three concentration ranges assayed: 0.3–4.0, 0.1–1.6 and 0.05–0.8 μg mL^–1 for sample volumes of 100, 400 and 800 μL, respectively, and the R.S.D.(%) (n = 10) were 1.80(100 μL), 3.04(400 μL) and 2.29(800 μL). The sensor showed an excellent selectivity which could also be increased with a simple on-line modification to avoid interference from copper. It was applied to a variety of real samples with very good results in all cases.     

Preparation of New Photosensitive ZrO2 Gel Films Using Hydroxyl-Substituted Aromatic Ketones as Chemical Modification Reagents and their Patterning

ZrO₂ gel films were prepared from zirconium tetra-n-butoxide chemically modified with one of hydroxyl-substituted aromatic ketones and 1′-hydroxy-2′-acetonaphthone, by the sol-gel method. The obtained gel film showed an absorption band, characteristic of the π-π* transition of chelate ring, at around 410 nm. The band was shifted to longer wavelength region than those for the gel films using β-diketones. The reason is thought that the hydroxyl-substituted aromatic ketone has π-electron system to form the condensed chelate ring. The absorption band associated with the chelate ring gradually decreased in intensity with UV-irradiation using a high pressure mercury lamp. This indicates that the chelate ring dissociates by the UV-irradiation and that the gel film exhibits photosensitivity. Utilizing the photosensitivity, fine patterns (about 1 μm) could be fabricated by UV-irradiation through a mask and leaching.     

MALDI-Q-TOF mass spectrometric determination of gold and platinum in tissues using their diethyldithiocarbamate chelate complexes

A rapid determination method is presented for gold (Au³⁺) and platinum (Pt⁴⁺) in tissues using matrix-assisted laser desorption ionization quadrupole time-of-flight mass spectrometry (MALDI-Q-TOF-MS). Au and Pt ions in wet-ashed tissue solution were reacted with diethyldithiocarbamate (DDC), and the resulting chelate complex ions Au(DDC)₂ ⁺ and Pt(DDC)₃ ⁺ were detected by MALDI-Q-TOF-MS using α-cyano-4-hydroxycinnamic acid as a matrix. The limit of detection (LOD) was 0.8 ng/g tissue and the quantification range was 2–400 ng/g for Au, and the LOD was 6 ng/g tissue and the quantification range was 20–4,000 ng/g for Pt. The Pt levels detected by MALDI-Q-TOF-MS in several tissues of a patient overdosed with cisplatin were nearly the same as those detected by flow-injection electrospray ionization mass spectrometry. The LODs of Au and Pt were 0.04 pg per well (sample spot) and 0.3 pg per well, respectively. To our knowledge, this is the first attempt to quantify Au³⁺ and Pt⁴⁺ ions in tissues by MALDI-Q-TOF-MS.

Comparative IR study of nitric oxide reactions with sublimed layers of iron(II)- and ruthenium(II)-meso-tetraphenylporphyrinates

The interactions of nitric oxide gas with thin layers of Fe(II)(TPP) and Ru(II)(TPP), obtained by sublimation onto low-temperature substrate (77 K), has been investigated by means of IR spectroscopy (TPP = meso-tetraphenylporphyrinate). Only simple addition of NO to form Fe(TPP)(NO) is observed for the iron-porphyrin Fe(II)(TPP), while, in contrast, Ru(II)(TPP) promotes NO disproportionation to form the nitrosyl-nitrito complex Ru(TPP)(NO)(ONO) and N(2)O. Thin layers of Fe(TPP)(NO) are inert to further reaction with excess NO; however, the nitrosyl-nitro complex Fe(TPP)(NO)(NO(2)) is readily formed when traces of dioxygen are added to the NO atmosphere. When the NO(2) concentrations in the NO/NO(2) mixture are relatively high, the nitrato complex Fe(TPP)(NO(3)) is also formed. Spectral data are given indicating that moderate shifts in the nitrosyl stretching frequency of Fe(TPP)(NO) are due to crystal packing effects, rather than to the H-bonding of coordinated NO with protic contaminants suggested in an earlier publication. Removal of NO by exhaustive evacuation from layers containing Fe(TPP)(NO)(NO(2)) leads to formation of Fe(TPP)(NO) and Fe(TPP)(NO(3)).     

Positron lifetime diagnostics of β-diketonates of bivalent metals

Positron lifetime diagnostics was used to study manganese(II), cobalt(II), nickel(II), copper(II), and zinc(II) acetylacetonates, γ-chloro and γ-bromo chelate complexes of cobalt and nickel, and similar halo and nitro chelate complexes of copper. The dependences of the annihilation lifetime τ₂ on the metal nature and the stability constant of the metal chelate ring were established. The annihilation lifetime and intensity were found to depend not only on the electronic effect of the γ-substituent in the chelate ring but also on the structure of the complex. A comparison of the dependences of the frequencies of the C-O and M-O stretching vibrations on τ₂ revealed that a positron interacts simultaneously with the γ-carbon atoms and the O atoms of the chelate ring, whose accessibilities are determined by the structures of bis(chelates). The plots of the ionization potentials of the n-orbitals of the bis(chelates) vs. τ₂ were similar to the plots of the quenching rate constant of the benzophenone triplet vs. τ₂ in the presence of the bis(chelates).