Non-dispersive systems in atomic fluorescence spectroscopy—III : Scattering by particles and its correction in practical analysis

In the determination of trace metals in sample solutions containing high concentrations of matrix material, the usefulness of the atomic fluorescence technique may be limited by the scatter signal from particulate matter in the flame. The nature and extent of this phenomenon are investigated and various methods of correction for it are discussed. These methods are applied in several practical analyses of high-purity metals, plant materials and soil samples.     

The determination of lead in blood by atomic fluorescence flame spectrometry

The use of atomic flame fluorescence for the direct determination of lead in diluted blood is described. The method is sensitive enough to determine the lead concentration in 20× diluted blood accurately and with a precision of better than 4% at a lead concentration level of 0.20 μg ml^-1. A special design of hollow cathode lamp is used, with an argon-hydrogen-oxygen flame. Sodium interference is compensated by addition to standards, and light scatter effects are eliminated by a simple filter. Linear response to lead concentration is obtained in the range 0–40 μg ml^-1.     

Trace gold determination by on-line preconcentration with flow injection atomic absorption spectrometry

A reverse-phase extraction column method has been employed as an on-line preconcentration technique for trace gold analysis by flame atomic absorption spectrometry. Di(methylheptyl)methyl phosphonate (DMHMP) loaded onto a macroporous resin was used as the immobilized phase. A thiourea-HCl solution was found successful in eluting the gold. The experimental parameters were optimized by Simplex Optimization, with 17 tests needed to obtain optimal conditions. Sensitivities of 5.2 mug/l. and 2.3 mug/l., with sample frequencies of 45/hr and 48/hr, were obtained by using single and dual-columns respectively. The recoveries for mixed composition samples were 93-110%.     

Magnetic solid-phase extraction to preconcentrate trace amounts of gold (III) using nickel ferrite magnetic nanoparticles

In this research, nickel ferrite (NiFe₂O₄) magnetic nanoparticles were synthesised by a simple method and applied as sorbent for magnetic solid-phase extraction of trace amounts of Au(III) from water samples. Detection in this technique was performed by flame atomic absorption spectrometry. The effects of sample pH, amount of sorbent, extraction time, desorption solvent and its volume on the extraction process were optimised. The effects of interfering ions on the recovery of the analyte were also evaluated in model solutions. The best results were obtained at pH 6.5 with 5 mL of eluent solution (0.1 mol L^?1 sodium thiosulphate) and an extraction time of 30 min. Under optimal conditions, the sorption capacity was 34.6 mg g^?1. Also, enhancement factor (for 100 mL of sample solution) was found to be 19.3. The calibration graph was linear in the range of 4.4–800.0 µg L^?1 gold concentration and the limit of detection was 1.32 µg L^?1. The relative standard deviation of the method (for n = 8) was 1.57%. The method was successfully applied to the extraction of Au(III) from water samples.     

Determination of Gold by Flame Atomic Absorption Spectrometry with Hollow Fiber Liquid Phase Microextraction Using Room Temperature Ionic Liquids

A novel method to preconcentrate gold was developed employing a synergistic enhancement of a room temperature ionic liquid combined with hollow fiber liquid phase micro-extraction with flame atomic absorption spectrometry detection. The method is based on the complexation of gold with dithizone. The formed hydrophobic complex was subsequently extracted into the lumen of a hollow fiber. The organic phase was siphoned into FAAS for the determination. A room temperature ionic liquid and dithizone were used the enhancement reagent and chelating reagent, respectively. The addition of a room temperature ionic liquid led to a five-fold improvement in the extraction of gold. The 1-octanol was immobilized in the pores of the polypropylene hollow fiber as the liquid membrane and was also used as the acceptor solution. Some parameters that influenced extraction and determination were evaluated in detail, such as concentrations of the ionic liquid and dithizone, pH of samples, stirring rates, extraction time, and interferences. Under optimized conditions, a detection limit of 0.9 ng mL^?1 and an enrichment factor of 130 were achieved. The relative standard deviation (RSD) was 3.7% for Au (40 ng mL^?1, n = 5). The proposed method was successfully applied to the determination of gold in certified reference environmental samples and ore samples with satisfactory results.     

Cloud point extraction and preconcentration of gold in geological matrices prior to flame atomic absorption determination

Brilliant green was used as a complexing agent in cloud point extraction (CPE) and applied for selective preconcentration of trace amounts of gold in geological matrices. The analyte in the initial aqueous solution was acidified with hydrochloric acid (0.1 M) and octylphenoxypolyethoxyethanol (Triton X-114) was added as a surfactant. After phase separation, based on the cloud point separation of the mixture, the surfactant rich phase was diluted with methanol and the analyte determined in the surfactant rich phase by flame atomic absorption spectrometry (FAAS). After optimization of the complexation and extraction conditions, a preconcentration factor of 31 was obtained for only 10 mL of sample. The analytical curve was linear in the range of 3–1000 ng mL⁻¹ and the limit of detection was 1.5 ng mL⁻¹. The proposed method was applied to the determination of gold in geological samples.     

Determination of Gold(III) by Simplified Room-Temperature Ionic Liquid Extraction with Flame Atomic Absorption Spectrometry

A new simplified extraction of gold(III) using a room-temperature ionic liquid prior to determination by flame atomic absorption spectrometry has been developed. The extraction method uses 1-butyl-3-methylimidazolium hexafluorophosphate without a chelating agent. The parameters of the extraction system were investigated in detail. Under the optimized conditions, a linear range of 0.19 to 38.20 µg · mL^?1, a limit of detection of 0.072 µg · mL^?1, an enrichment factor of 10.0, and an extraction capacity of 6.6 mg · g^?1 were obtained. The extraction mechanism and the selectivity of 1-butyl-3-methylimidazolium hexafluorophosphate for gold(III) were also investigated. The method was applied for the determination of gold(III) in water samples with satisfactory results.     

Effects of concentrated matrices on the determination of trace levels of platinum and gold in aqueous samples using solvent extraction—Zeeman effect graphite furnace atomic absorption spectrometry and inductively coupled plasma—mass spectrometry

Two methods of determining trace levels of platinum and gold in aqueous solutions with high concents of total dissolved solids were investigated. The first involves preconcentration and separation of the precious metals from the interfering matrix by solvent extraction, followed by graphite furnace atomic absorption spectrometry (GFAAS) with Zeeman effect background correction. The direct determination of Pt and Au in solutions of high ionic strength by GFAAS is not desirable because of interference between elements in the matrix and the analyte, increased imprecision of analysis, greatly increased background absorbance leading to increased detection limits and rapid deterioration of the graphite tube. All the extraction methods for gold examined in this study resulted in decreased imprecision, increased sensitivity and lower background absorbance compared with direct measurements on the aqueous solution. All techniques also exhibited good recoveries (> 8%) and reproducibilities (relative standard deviation < 10%). The highest sensitivities for gold extraction from distilled water were obtained for dibutyl sulfide (DBS)—toluene and the lowest for cyanide—dibutyl ketone. The degree of extraction of Au was, however, dependent on the composition of the solution, indicating that standard and sample matrices should be closely matched even when employing solvent extraction. Solvent extraction was generally less successful for Pt. In order to obtain an acceptable imprecision in the Pt extractions, it was found that the use of SnCl₂ as a labilizing agent is essential for most of the techniques investigated.The second method was direct measurement by inductively coupled plasma mass spectrometry (ICP—MS). ICP—MS offers the advantages of a very low detection limit (100 ng l^?1 or better) without preconcentration and a large dynamic range. However, severe matrix effects can occur in concentrated solutions. Whereas high concentrations in solution of both sodium perchlorate and sodium chloride decrease the sensitivity, the presence of sulfide and natural organic (fulvic) acid increase the sensitivity for Pt and Au by a factor of up to 4. Sulfate, on the other hand, decreases the sensitivity of ICP-MS for Pt. The method of standard additions or isotope dilution is recommended for routine use to circumvent this problem, especially when the nature of the matrix is unknown or cannot be easily matched in the standards.     

Comparison of novel pyridine-functionalized mesoporous silicas for Au(III) extraction from natural samples

A technique for solid-phase extraction utilizing pyridine-functionalized nanoporous silica (MCM-41, MCM-48 and SBA-15) was developed for the determination of gold in different samples using flame atomic absorption spectrometry. The effects of concentration and volume of eluent, pH of the solution, flow rate of extraction, sample volume and of potentially interfering ions on the efficiency of preconcentration and recovery was investigated. The limit of detection is lower than 45 pg mL^?1. Under optimal conditions, the accuracy and precision (RSD%) of the method were calculated to be >99.5% and <0.7% for the two MCMs (41 and 48) and >89.5%, and <1.5% for SBA-15, respectively. The SPE technique was used to determine the concentration of gold in natural and industrial wastewater with satisfactory results.

Multisyringe flow-injection system for total inorganic arsenic determination by hydride generation-atomic fluorescence spectrometry

A software-controlled time-based multisyringe flow-injection system for total inorganic arsenic determination by hydride generation atomic fluorescence spectrometry (HGAFS) has been developed. By using a multisyringe burette coupled with one multiport selection valve, the time-based injection provides precise known volumes of sample, a reducing sodium tetrahydroborate solution and a pre-reducing solution which are dispensed into a gas-liquid separation cell. An argon flow delivers the arsine into the flame of an atomic fluorescence spectrometer. A hydrogen flow has been used to support the flame.Linear calibration graphs for arsenic concentrations between 0.25 and 12 μg l⁻¹ were obtained. The detection limit of the proposed technique (3σ_b/S) was 0.07 μg l⁻¹. A sample throughput of 36 samples/h (108 injections) has been achieved. The proposed technique has been validated by means of reference solid and water materials with good agreement with the certified values. This method was compared with those reported in previous sequential injection analysis (SIA) and flow-injection analysis (FIA) systems. The proposed method offers a number of advantages in front the usual AFS applications, which are mainly a higher sampling frequency and a significant reduction in reagent consumption.     

Laser spectroscopy for atmospheric chemistry: selected applications involving the fluorescence technique

The application of laser-based techniques to the study of different problems related to atmospheric chemistry is well established. Among the various laser spectroscopic methods, the focus here is directed towards selected applications of the laser photofragmentation and fluorescence techniques, which are used to investigate the complex chemistry of tropospheric sulphur species, with particular emphasis on the oxidation of dimethyl sulphide (DMS) and the consequent formation of sulphuric acid, and to the possibility of detecting with very high sensitivity and selectivity a particular element (e.g., gold) in size-segregated aerosol particles in view of its possible release as a tracer in the atmosphere. The atomic fluorescence technique is also applied to the real time detection of lead in a miniature air-acetylene flame, in which monodisperse aerosol particle are introduced.     

Laser spectroscopy for atmospheric chemistry: selected applications involving the fluorescence technique

The application of laser-based techniques to the study of different problems related to atmospheric chemistry is well established. Among the various laser spectroscopic methods, the focus here is directed towards selected applications of the laser photofragmentation and fluorescence techniques, which are used to investigate the complex chemistry of tropospheric sulphur species, with particular emphasis on the oxidation of dimethyl sulphide (DMS) and the consequent formation of sulphuric acid, and to the possibility of detecting with very high sensitivity and selectivity a particular element (e.g., gold) in size-segregated aerosol particles in view of its possible release as a tracer in the atmosphere. The atomic fluorescence technique is also applied to the real time detection of lead in a miniature air-acetylene flame, in which monodisperse aerosol particle are introduced.     

Antimony determination and speciation by multisyringe flow injection analysis with hydride generation-atomic fluorescence detection

A new analytical procedure for determination of inorganic antimony and speciation of antimony(III) and antimony(V) is presented. For this purpose, a software-controlled time-based multisyringe flow injection system, which contains a multisyringe burette provided with a multi-port selection valve, was developed. Hydride generation-atomic fluorescence spectrometry was used as a detection technique. A 0.3% (w/v) reducing sodium tetrahydroborate solution, hydrochloric acid (2 M), an antimony solution and a pre-reducing solution of 10% (w/v) KI and 0.3% (w/v) ascorbic acid are dispensed simultaneously into a gas-liquid separation cell with further propulsion of the reaction product into the flame of an atomic fluorescence spectrometer using argon flow. A hydrogen flow was employed to support the flame.The linear range and the detection limit (3s_b/S) of the proposed technique were 0.2-5.6 μg l⁻¹ and 0.08 μg l⁻¹, respectively. A sample throughput of 18 samples per hour (corresponding to 80 injections per hour) was achieved. The relative standard deviation for 18 independent measurements was 4.6%. This technique was validated by means of reference solid and water materials with good agreement with the certified values. Satisfactory results for speciation of Sb(III) and Sb(V) by means of the developed technique were obtained.     

Electrospun Nylon-66/5-(4-dimethylaminobenzyliden) rhodanine composite nanofibres for solid phase extraction of palladium ions from wastewater samples

In the present work, a simple procedure is presented for the extraction and determination of pre-concentrated trace amounts of palladium ions through solid phase extraction (SPE) and flame atomic absorption spectrophotometry. This process was performed using Nylon-66/5-(4-dimethylaminobenzylidene) rhodanine composite nanofibres. These nanofibres were produced under optimised conditions via two-axial electrospinning technique and characterised by scanning electron microscopy and Fourier-transform infrared spectroscopy. The effect of experimental parameters including solution pH, the type and volume of eluent and contact time was investigated in extraction and desorption process. Under the optimised conditions, good linearity in the range of 0.07–8 μg L^?1 and low detection limit of 0.015 μg L^?1 were obtained. High enrichment factor of 187.5 and good relative standard deviation of ±2.2% at 5 μg L^?1 of palladium had been achieved. The sorbent capacity for palladium adsorption was obtained 27 mg palladium per gram of nanofibres. So, the SPE was successfully applied to pre-concentrate and determine Pd(II) ions with flame atomic absorption spectrophotometer in real samples.     

An investigation of atom collection phenomena in the atomic absorption spectrometry of copper

Analyte collection within a premixed air—acetylene flame for atomic absorption spectometric measurements is described. Copper species of the aspirated solution are collected for fixed periods of time on a water-cooled silica tube positioned within the flame, with the flame burning normally. At the end of a specified time, collection is stopped, the coolant water is quickly flushed out of the silica tube, and the copper species that evaporate into the analyzing radiation beam in the flame, and are atomized, are measured by atomic absorption at 324.8 nm. Aqueous and hydrochloric acid solutions were examined, and the effects of varying flame conditions, positions of the collector and signal measurement, etc., are discussed. A characteristic concentration of 0.0008 ppm was obtained for 0.01 ppm Cu²⁺ solution. With the same equipment in the absence of a collector tube, the value was 0.04 ppm. The presence of a 10,000-fold amount of Al³⁺ enhanced the sensitivity of the collection technique slightly.     

Solid phase extraction of gold by sorption on octadecyl silica membrane disks modified with pentathia-15-crown-5 and determination by AAS

A simple and selective method for rapid and efficient concentration and determination of μg l⁻¹ levels of Au(III) ions in aqueous solution using octadecyl silica membrane disks modified by pentathia-15-crown-5 and flame atomic absorption spectrometry is presented. The influence of flow rates of eluent and sample solution, amount of ligand, types and least amount of eluent for elution of Au from disks were investigated. Break through volume and limit of detection of the membrane disks modified by 5 mg of the thiacrown ether was found to be 2.0 l and 1.0 μg l⁻¹, respectively. The effects of various cationic interferences on percent recovery of gold were studied. The method was successfully applied for the determinations of gold in some pharmaceutical samples and for the recovery of trace Au³⁺ ions from synthetic and water samples.     

Double-walled carbon nanotubes as a solid phase extractor for separation-preconcentration of traces of gold from geological and water samples

In this work, a solid phase extraction method has been developed using a column filled with double-walled carbon nanotubes (DWNT) for preconcentration-separation of gold(III) ions prior to their flame atomic absorption spectrometric determination. Gold(III) ions were quantitatively recovered on DWNT in 1.0?mol?L^?1 HCl. The influences of the analytical conditions including eluent type, sample volume, etc. on the recoveries of gold(III) ions were examined. The effects of concomitant ions were also investigated. The detection limits for gold(III) based on 3σ was calculated as 1.5?µg?L^?1. The procedure presented in this paper was applied to the gold content of a number of water, geological and anodic slime samples with successful results.     

Flame AAS/flame AES for trace determination in fresh and used lubricating oils with sample introduction by hydraulic high-pressure nebulization

In hydraulic high-pressure nebulization (HHPN) an aerosol is produced by means of an HPLC-pump and a special nebulization nozzle, applying a pressure of about 200 bar. This spray technique has been employed for sample introduction of mineral oil samples in flame atomic absorption/flame emission spectrometry. The determination of the trace elements Al, Cr, Cu, Fe, K, Na, Ni, Pb, Si and V has been investigated. Viscosity hardly acts upon the sensitivity of the determination, thereby avoiding a time consuming dilution of oil samples. By means of two interconnecting sampling valves a calibration method based on the standard addition technique can be performed which is both simple and easy to carry out. In samples of used oils, results for Cu and Pb equalled those of XRF-analysis. Regarding Fe traces, data obtained from AAS and XRF measurement correlate. In comparison with sample uptake by pneumatic nebulization, which is restricted to diluted oil samples, detection limits decrease by a factor of 2 to 4, indicating the dilution required in pneumatic nebulization.     

Determination of cadmium in rice and water by tungsten coil electrothermal vaporization-atomic fluorescence spectrometry and tungsten coil electrothermal atomic absorption spectrometry after cloud point extraction

In this work, the microsampling nature of tungsten coil electrothermal vaporization Ar/H₂ flame atomic fluorescence spectrometry (W-coil ETV-AFS) as well as tungsten coil electrothermal atomic absorption spectrometry (W-coil ET-AAS) was used with cloud point extraction (CPE) for the ultrasensitive determination of cadmium in rice and water samples. When the temperature of the extraction system is higher than the cloud point temperature of the selected surfactant Triton X-114, the complex of cadmium with dithizone can be quantitatively extracted into the surfactant-rich phase and subsequently separated from the bulk aqueous phase by centrifugation. The main factors affecting the CPE, such as concentration of Triton X-114 and dithizone, pH, equilibration temperature and incubation time, were optimized for the best extract efficiency. Under the optimal conditions, the limits of detection for cadmium by W-coil ETV-AFS and W-coil ET-AAS were 0.01 and 0.03 μg L⁻¹, with sensitivity enhancement factors of 152 and 93, respectively. The proposed methods were applied to the determination of cadmium in certified reference rice and water samples with analytical results in good agreement with certified values.     

The separation–preconcentration and determination of ultra-trace gold in water and solid samples by dispersive liquid–liquid microextraction using 4-ethyl-1(2-(4-(4-nitrophenyl)piperazin-1-yl)acetyl)thiosemicarbazide) as chelating agent and flame atomic absorption spectrometry

A selective separation and preconcentration method for the determination of gold ions in water and ore samples has been developed using dispersive liquid–liquid microextraction, followed by flame atomic absorption spectrometry. 4-Ethyl-1(2-(4-(4-nitrophenyl)piperazin-1-yl)acetyl)thiosemicarbazide) (NPPTSC) has been used for the first time as new chelating reagent. A mixture of ethanol (dispersive solvent) and carbon tetrachloride (extraction solvent) was used. Some parameters affecting the extraction procedure including the type and volume of the extracting and dispersive solvents, HNO₃ concentration, the chelating agent amount, volume of sample, and foreign ions have optimized. Also, the complex formation between gold ions and the ligand has been investigated in a methanol–water solution (1:1) using UV–visible spectrometry. The spectrophotometric titration data showed that of Au–NPPTSC complex composition was found to be 3:2. After optimizing the instrumental and experimental parameters, we achieved a detection limit of 1.5 µg L^?1, a preconcentration factor of 50, and a linear dynamic range of 10.0–400.0 µg L^?1. The relative standard deviation obtained 2.1% at 50 µg L^?1 for gold ions (n = 10). The proposed method was successfully performed for the determination of gold in certified reference material, environmental water, and ore samples.