Sodium ion-selective membrane electrode based on a new crown ether

A sodium ion-selective PVC membrane electrode based on di(o-methoxy)stilbenzo-24-crown-8 is reported. The electrode gives a near-Nernstian response in the range 9×10^?6–1×10^?2 M sodium ion and can be used in the pH range 5–8.5. Selectivity coefficients are 1.8×10^?1 (K⁺), 2.0×10^?4 (Li⁺) 2.5×10^?2 (NH⁺₄) and about 10^?4 for Mg²⁺, Ca²⁺ and Ba²⁺.     

Simultaneous determination of sodium and potassium in human urine or serum using coated-wire ion-selective electrodes based on bis(crown ether)s

Summary High-performance coated-wire ion-selective electrodes based on dodecylmethyl bis(12-crown-4) and bis(benzo-15-crown-5) are used for the simultaneous determination of Na⁺ and K⁺ in human urine or serum by means of the Gran's plot method. The results of the potentiometric determination for Na⁺ and K⁺ in human urine or serum are in good agreement with the values obtained by flame photometry.

---

Simultane Bestimmung von Natrium und Kalium in menschlichem Harn oder Serum unter Verwendung ionen-selektiver Elektroden aus Bis-Kronen-Ethern

Zusammenfassung Hochleistungsfähige ionen-selektive Elektroden auf der Basis von Dodecylmethyl-bis-(12-kronen-4)- und Bis-(benzo-15-kronen-5)-ether wurden für die simultane Bestimmung von Natrium und Kalium in menschlichem Harn bzw. Serum mit Hilfe von Gran's plot method verwendet. Die Ergebnisse der potentiometrischen Bestimmung stehen mit denen der Flammenphotometrie in guter Übereinstimmung.

     

Studies on bis(crown ether)-based ion-selective electrodes for the potentiometric determination of sodium and potassium in serum

Bis(crown ether)-based ion-selective electrodes for sodium and potassium are described, based on the bis[(12-crown-4)-2-ylmethyl]-2-dodecyl-2-methyl malonate sensor(I) for sodium and the bis[(benzo-15-crown-5)-15-ylmethyl] pimelate sensor(II) for potassium. The best results were obtained when the sensors were used in association with 2-nitrophenyl octyl ether as plasticising solvent mediator and potassium tetrakis(4-chlorophenyl)borate as anion excluder in poly(vinyl chloride) matrices. Electrode slopes were near-Nernstian, with detection limits of less than 10(-5) M. The electrode features are compared with those of a sodium glass membrane electrode, for sensor I, and with a valinomycin-based potassium electrode, for sensor II. The electrodes are also discussed in relation to others reported for sensors I and II and are shown to be superior. However, although the electrodes described offer promising alternatives to glass electrodes for sodium and valinomycin electrodes for potassium, data for sodium and potassium measurements in blood serum indicate a need for further research in order to improve the correlation with flame photometric measurements.     

Novel bis (crown ether)-based potassium sensor for biological applications

Based on structure-selectivity studies on bis-benzo-crown ether derivatives, 2,2-bis[3,4-(15-crown-5)-2-nitrophenylcarbamoxymethyl]tetradecane (BME-44) was designed and synthesized. The performance characteristics of this new, highly lipophilic ionophore of the group of bis-nitrobenzo-15-crown-5 derivatives with urethane linkage when used in liquid membrane electrodes are evaluated with special regard to the requirements of biological and clinical applications. Potentiometric steady-state and flow-through dynamic data are presented to prove the sensor capabilities for clinical and physiological potassium determinations.Dedicated to Professor W. Simon on the occasion of his 60th birthday     

Caesium-selective PVC membrane electrodes based on bis(crown ether)s

Caesium-selective PVC membrane electrodes based on bis(crown ether)s containing benzo-18-crown-6 moieties were prepared using two kinds of plasticizers. Selectivity coefficients for various interfering monovalent ions were determined by the mixed solution method, and were found to relfect the complexing property and extractability of the bis-(benzo-18-crown-6)s. The electrochemical selectivity was also compared with that of the corresponding monocyclic analog and valinomycin.     

Synthesis and multitopic complex formation of a photochromic bis(crown ether) based on benzobis(thiazole)

2,7-Bis[2-(6,7,9,10,12,13,15,16-octahydro-5,8,11,14,17-pentaoxabenzocyclopentadecen-2-yl)vinyl]-benzo[1,2-d;3,4-d']bisthiazole, 2, with crown ether styryl moieties substituted on a heterocyclic core, was synthesized and its complex forming ability with several metal cations was evaluated in acetonitrile by absorption and fluorescence spectroscopy. The results are compared to those for the analogous ligand possessing a single crown ether styryl moiety. Selective binding of the metal cation at the heterocyclic core of both ligands was observed only for Hg2+. Alkali and alkaline earth cations bind selectively at the crown ether moieties. Stability constants and pure spectra of defined stoichiometry were determined with the use of HYPERQUAD, a least-squares fitting program, and the results were validated in one case by subjecting the titration spectral matrix to singular value decomposition with self-modeling (SVD-SM). The multitopic ligand 2 forms relatively strong 2:2 stoichiometric complexes with K+, among the alkali metal cations, and Ba2+, among the alkaline earth metal cations, and is a promising selective optical sensor for these ions.     

Synthesis of a symmetric cylindrical bis(crown ether) host and its complexation with paraquat

The first cylindrical host for paraquat derivatives was prepared and characterized by X-ray analysis. Its complex with paraquat has 1:2 stoichiometry. The complexation is statistical and strong as shown by proton NMR characterization, electrospray mass spectrometry, and X-ray analysis.     

Extraction of alkali metal picrates with poly- and bis(crown ether)s

Extraction of alkali metal picrates by new poly- and bis(crown ether)s containing benzo-15-crown-5 and benzo-18-crown-6 moieties was carried out with chloroform as water-immiscible solvent. The poly- and bis(crown ether)s were found to extract the picrates more effectively than the corresponding monocyclic crown ethers. In particular, poly- and bis(benzo-15-crown-5), and bis(benzo-18-crown-6) are remarkably effective extracting reagents for potassium and rubidium, and for caesium, respectively. Extraction equilibrium constants and the complexation constants in the chloroform phase were also evaluated and the contribution of the complexation constants to the extractability is discussed.     

A new beryllium ion-selective membrane electrode based on dibenzo(perhydrotriazino)aza-14-crown-4 ether

Beryllium(II) selective electrodes have been fabricated based on poly(vinyl chloride) (PVC) matrix membranes containing newly synthesized neutral carrier dibenzo(perhydrotriazino)aza-14-crown-4 ethers as ionophore. Best performance was exhibited by the membrane having a composition ionophore (IIa):PVC:sodium tetraphenylborate (NaTPB):tributyl phosphate (TBP) in the ratio (w/w; mg) of 5:30:3:65. This membrane worked well over a wide concentration range 7.6 × 10⁻⁶ to 1.0 × 10⁻¹ M of Be²⁺ with a Nernstian slope of 30.7 mV per decade of beryllium activity. The response time of the sensor is 15 s and the membrane can be used over a period of 4 months with good reproducibility. The proposed electrode works well in a wide pH range 3.0–9.0. It was successfully applied to the determination of beryllium in a mineral sample.     

Synthesis and properties of poly(ether imide)s based on a benzonorbornane bis(ether anhydride)

A novel bis(ether anhydride) monomer, 3,6‐bis(3,4‐dicarboxyphenoxy)benzonorbornane dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile with 3,6‐dihydroxybenzonorbornane in the presence of potassium carbonate, followed by the alkaline hydrolysis of the intermediate bis(ether dinitrile) and the cyclodehydration of the resulting bis(ether diacid). A series of poly(ether imide)s bearing pendant norbornane groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were 0.81–1.81 dL/g. The poly(ether imide) with m‐phenylenediamine as a diamine showed good organosolubility. Most of the cast poly(ether imide) films have had high tensile strengths and moduli. The glass‐transition temperatures of these poly(ether imide)s, except for those from rigid p‐phenylenediamine and benzidine, were recorded between 211 and 246 °C by differential scanning calorimetry. The softening temperatures of all the poly(ether imide) films stayed within 210–330 °C according to thermomechanical analysis. No polymers showed significant decomposition before 500 °C in a nitrogen or air atmosphere. A comparative study of the properties with the corresponding poly(ether imide)s without pendant substituents was also made. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1712–1725, 2002     

Synthesis,complexation, and photochemistry of benzobisthiazole-based bis(crown ether)

Benzobisthiazole-based bis(crown ether) was synthesized and its complexation with alkali and alkaline earth cations was studied. Photochemical transformations of the free ligand and its complexes with alkaline earth cations involve E,Z-photoisomerization and [2+2] photocycloaddition. Dedicated to Academician N. S. Zefirov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2056–2065, September, 2005.     

Influence of the angle between two crown ether moieties on supramolecular copolymerization of bis(crown ether)s and bisparaquat homoditopic monomers

Bis(crown ether) homoditopic monomers containing two bis(p-phenylene)-34-crown-10 moieties with different angles(180° for monomer 3,120°for monomer 4,and 60°for monomer 5) and a complementary bisparaquat homoditopic monomer(7) were designed and synthesized.The three bis(crown ether) monomers could organize into linear supramolecular polymers in concentrated solutions in CHCl3/CH3CN with the bisparaquat monomer 7,as demonstrated by 1 H NMR and viscosity studies. The pseudorotaxanes or supramolecular polymers...     

Ion pair cooperative binding of potassium salts by new rhenium(I) bipyridine crown ether receptors

The new rhenium(I) bipyridine crown ether receptors 1-4 have been prepared and their ion pair recognition properties examined. The crystal structure of [1.KCl](2).2H(2)O demonstrates that potassium is coordinated by benzo-18-crown-6 and chloride is hydrogen bonded to the amide groups. Receptor 3 extracts solid KCl and KOAc into chloroform via ion pair complexation. NMR and emission titration studies with receptors 1-4 and KCl/KOAc show that cobound potassium enhances anion binding strength by electrostatic and conformational effects. Significant cooperative interactions are observed between the anion and cation sites for host 4 in CH(3)CN. This molecule coordinates potassium to form a 1:1 intramolecular sandwich complex, which preorganizes the host for acetate binding.     

Solvent extraction of alkaline earth metal picrates with poly- and bis(crown ether)s

Summary Solvent extraction of alkaline earth metal picrates with poly- and bis(crown ether)s containing benzo-15-crown-5- and benzo-18-crown-6 moieties was carried out in a water-chloroform system. The poly- and bis(crown ether)s showed larger extractability for the metal picrates than the corresponding monocyclic crown ethers. Especially, poly- and bis(benzo-15-crown-5), and bis(benzo-18-crown-6) were found to have relatively high extractability and selectivity for Ba²⁺ and Sr²⁺, respectively.

---

Lösungsmittelextraktion von Erdalkalipikraten mit Hilfe von Poly- und Bis-Kronenethern

Zusammenfassung Poly- und Bis-Kronenether mit Benzo-15-krone-5- und Benzo-18-krone-6-Einheiten wurden zur Extraktion von Erdalkalipikraten im Wasser-Chloroform-System verwendet. Die genannten Ether zeigten eine bessere Extraktionsfähigkeit für die Pikrate als die entsprechenden monocyclischen Kronenether. Im Falle von Ba²⁺ und Sr²⁺ ergab sich eine besonders gute Extrahierbarkeit und Selektivität mit Poly- und Bis(benzo-15-krone-5)- und Bis(benzo-18-krone-6)-Ethern.

     

Use of a crown ether-heteropoly acid precipitate as a potassium ion-selective membrane electrode

Summary A Potassium ion-selective electrode based on dibenzo-18-crown-6-tungstophosphoric acid precipitate membrane is prepared and conditions for the best functioning have been investigated. The working concentration and pH-range of the electrode is 2.0×10^–2 to 1.3×10^–6 mol/l and 2.9–6.5, respectively. The selectivity coefficient values for a large number of cations are quite low except for caesium and ammonium ions. The electrode can tolerate non-aqueous content upto 20%.

---

Kaliumion-sensitive Membranelektrode auf Basis von Kronenether-Heteropolysäure

     

Taco grande: a dumbbell bis(crown ether)/paraquat [3](taco complex)

The first paraquat-based [3](taco complex) was successfully prepared from a linear bis(crown ether) host and paraquat as shown by proton NMR characterization and X-ray analysis. It has a dumbbell shape in the solid state. The two crown ether binding sites are independent of each other during their complexation in solution.     

A triptycene-based bis(crown ether) host: complexation with both paraquat derivatives and dibenzylammonium salts

[reaction: see text] A novel triptycene-based bis(crown ether) host (1) incorporating two dibenzo-24-crown-8 ether moieties has been synthesized. It can form not only a new bis[2]pseudorotaxane with dibenzylammonium salts but also stable clip-shaped complexes with paraquat derivatives. Moreover, the complexation process between 1 and the two classes of guests can be chemically controlled.