Stereoselective synthesis of cis and trans 2-substituted 1-phenyl-3-azabicyclo[3.1.0]hexanes

The Stereoselective synthesis of cis and trans 2-methyl-1-phenyl-3-azabicyclo[3.1.0]hexanes and 1,2-diphen-yl-3-azabicyclo[3.1.0]hexanes from 2-oxo-1-phenyl-3-azabicyclo[3.1.0]hexane is described. The relative stereochemistry of the products was established by nuclear magnetic resonance and molecular modeling studies.     

Synthesis,including asymmetric synthesis,of 3-oxabicyclo[3.1.0]hexanes and bicyclo[3.1.0]hexanes by the 1,5-CH insertion of cyclopropylmagnesium carbenoids as the key reaction

The addition reactions of α,β-unsaturated carbonyl compounds with dichloromethyl p-tolyl sulfoxide in the presence of NaHMDS or LDA resulted in the formation of adducts, 1-chlorocyclopropyl p-tolyl sulfoxides bearing a carbonyl group at the 2-position, in almost quantitative yields. The carbonyl group of the adducts was transformed to various ether groups to give 1-chlorocyclopropyl p-tolyl sulfoxides bearing an ether functional group at the 2-position in short steps. Treatment of these products with i-PrMgCl at low temperature afforded cyclopropylmagnesium carbenoids via the sulfoxide-magnesium exchange reaction. 1,5-Carbon–hydrogen insertion (1,5-CH insertion) reaction of the generated magnesium carbenoid intermediates took place to give 3-oxabicyclo[3.1.0]hexanes or bicyclo[3.1.0]hexanes bearing an ether group at the 4-position in moderate to good yields. When this procedure was carried out starting with enantiopure dichloromethyl p-tolyl sulfoxide, enantiopure 3-oxabicyclo[3.1.0]hexanes were obtained in good overall yields. These procedures provide a good way for the synthesis, including asymmetric synthesis, of multisubstituted 3-oxabicyclo[3.1.0]hexanes and bicyclo[3.1.0]hexanes from α,β-unsaturated carbonyl compounds and dichloromethyl p-tolyl sulfoxide in short steps.     

Synthesis of bicyclo[3.1.0]hexanes functionalized at the tip of the cyclopropane ring. Application to the synthesis of carbocyclic nucleosides

[reaction: see text] A general synthetic strategy for the preparation of functionalized bicyclo[3.1.0]hexanes is described. The new approach employs a cross metathesis step designed to functionalize the appropriate terminal olefin of the bicyclo[3.1.0]hexane precursor and a carbene-mediated intramolecular cyclopropanation reaction on the corresponding diazo intermediate. This combined methodology allowed the diastereoselective introduction of chemically diverse substituents at the tip of the cyclopropane group, except in cases where the substituents consisted of electron-withdrawing groups where a competing [3 + 2] cycloaddition predominated.     

Stereoselective synthesis of 1-nitrobicyclo[3.1.0]hexanes and fused isoxazoline-N-oxides from primary nitro compounds

The one-step preparation of 1-nitrobicyclo[3.1.0]hexane and bicycloisoxazoline-N-oxide was readily achieved from conjugate adducts of nitro alkenes and allylmalonates by treatment with Ag(2)O and iodine under basic conditions. We observed that when a primary alkyl group was present at the β-position of the nitro group, bicyclo[3.1.0]hexane was preferentially formed, whereas if a secondary alkyl group occupied that position, isoxazoline-N-oxide was predominantly produced. High cis-selectivity was observed for the formation of cyclopentane units for both reactions. An iodomethyl adduct, considered an intermediate of the cyclization, was isolated, and its conversion to isoxazoline-N-oxide was successfully achieved. The isoxazoline-N-oxide underwent 1,3-dipolar cycloaddition with alkenes to yield tricycloheterocyclic compounds, which were readily converted to spirolactam in good yield by reductive cleavage of N-O bonds using Raney-Ni. On the other hand, 1,3-dipolar cycloaddition of the isoxazoline-N-oxide to terminal alkynes yielded tricyclic aziridines stereoselectively.     

Stereoselective synthesis of bicyclo[4.2.1]nonane skeletons by ring-closing metathesis: a new versatile methodology for the efficient assembly of functionalized cyclooctanoids

[reaction: see text] A new versatile methodology, resulting in a formal three-carbon ring expansion of cyclopentanones, for the efficient assembly of functionalized cyclooctanoids is described. The approach is based on the chemo-, regio-, and stereoselective alpha,gamma-difunctionalization of beta-ketoesters followed by ring-closing metathesis to form functionalized bicyclo[4.2.1]nonanes, precursors of the corresponding cyclooctanes, by selective ring cleavage of the one-carbon-atom bridge.     

Domino retro Diels-Alder/Diels-Alder reaction: an efficient protocol for the synthesis of highly functionalized bicyclo[2.2.2]octenones and bicyclo[2.2.2]octadienones

A novel and convenient approach, the domino retro Diels-Alder/Diels-Alder reaction sequence for highly stereo- and regioselective synthesis of various bicyclo[2.2.2]octenone and bicyclo[2.2.2]octadienone derivatives is presented. Thus, the masked o-benzoquinones (MOBs) 2a-e generated by the pyrolysis of the respective dimers 3a-e participated in this novel synthetic strategy with a variety of olefinic and acetylenic dienophiles at 220 degrees C to provide the title compounds in good to excellent yields.     

The photosensitized rearrangement of aryl-substituted tricyclo[2.2.0.02,6]hexanes to bicyclo[3.1.0]hex-2-enes

The triplet sensitized irradiation of 3-allyl-diaryl-substituted cyclopropenes to bicyclo[3.1.0]hex-2-enes proceeds via an intramolecular [2+2]-cycloaddition followed by a subsequent rearrangement of the initially formed tricyclo[2.2.0.0^2,6]hexane skeleton.     

Stereochemical assignments of the 6-phenyl-2-oxabicyclo[3.1.0]hexanes

Preparation and stereochemical assignments of the 6-phenyl-2-oxabicyclo[3.1.0]hexanes are reported. The stereochemical assignments are based on chemical as well as nmr data.     

Unusual carbon shielding effects of cyclopropanes and double bonds in strained bicyclo[3.1.0]hexanes and cyclopentenes

Carbon-13 shieldings and one-bond ¹³C? H coupling constants of bicyclo[2.1.1]hexane, bicyclo[2.1.1]hex-2-ene, tricyclo[3.1.1.0^2,4]heptane and benzvalene are presented and compared to the data of related compounds. If a bicyclo[3.1.0]hexane system is part of a rigid skeleton, the cyclopropane ring exerts specific γ substituent effects of two kinds. In the case of the bicyclohexane boat form an upfield shift of the C-3 signal is observed and in the case of the chair form a downfield shift of 15–20 ppm. Compared to the corresponding cyclopentanes the double bond in strained cyclopentenes causes downfield shifts of the C-4 absorption. This effect increases with increasing strain, reaching a 45.9 ppm maximum in benzvalene. Hence it is the only known bicyclo[1.1.0]butane having a reversed order of carbon shieldings. The downfield shifts are explained by means of simple orbital interaction schemes.     

An atom-economic synthesis of bicyclo[3.1.0]hexanes by rhodium N-heterocyclic carbene-catalyzed diastereoselective tandem hetero-[5+2] cycloaddition/Claisen rearrangement reaction of vinylic oxiranes with alkynes

The first synthetic application of a vinylic oxirane as a heteroatom-containing five-atom component in transition-metal-catalyzed cycloaddition reactions is reported. A new, efficient, diastereoselective tandem intramolecular hetero-[5+2] cycloaddition/Claisen rearrangement of vinylic oxirane-alkyne substrates that uses a rhodium NHC complex and provides strategically novel, atom-economic, regiospecific, and diastereoselective access to [3.1.0] bicyclic products has been developed.     

Synthesis of the P-sulfide derivatives of 3-phosphabicyclo[3.1.0]hexanes and 1,2-dihydrophosphinines

Several 3-phosphabicyclo[3.1.0]hexane 3-oxides have been transformed into the corresponding sulfides by reaction with phosphorus pentasulfide. The 3-phenyl derivative could also be prepared by deoxygenation of the oxide followed by reaction with elemental sulfur. Opening of the cyclopropane ring in phosphabicyclohexane sulfides afforded mixtures of 3- and 5-methyl-1,2-dihydro-phosphinine-1-sulfides. Because of better yields, preparation of these products by thionation of the dihydrophosphinine oxides is more appropriate. The new phosphorus heterocycles have been characterized by ³¹P, ¹³C, and ¹H NMR and mass spectral data.     

Stereoselective synthesis of highly functionalized 1,5-oxa-bridged cyclooctenes via a 3-oxidopyrylium-cyclopropenone acetal cycloaddition [corrected

[reaction: see text] A [5C+2C] oxidopyrylium-cyclopropenone acetal cycloaddition followed by ring opening of the cyclopropane unit of the resulting adduct leads to highly substituted 1,5-oxa-bridged cyclooctenes containing up to four stereocenters. The protocol formally constitutes a [5C+3C] annulation process.     

One-pot two-component [3 + 2] cycloaddition/annulation protocol for the synthesis of highly functionalized thiophene derivatives

An efficient and experimentally rapid protocol for the synthesis of hitherto unreported 2,3-dicarboalkoxy-4-aroyl/heteroaroyl/alkanoyl thiophenes has been developed via 1-2 (C-S) and 3-4 (C-C) bond connections promoted by 4-dimethylaminopyridine (DMAP). Optimally, the reaction takes only 3-5 min when β-oxodithioester and dialkyl acetylenedicarboxylate are stirred in DCM at room temperature in the presence of DMAP. This method allows a clean and general synthesis of previously inaccessible and synthetically demanding thiophenes containing the ferrocenyl group. The speed, experimental ease, and high yields of this process are improvements over existing methods to access this important substructure.     

Novel synthesis of 3-azabicyclo[3.1.0]hexanes by unusual palladium(0)-catalyzed cyclopropanation of allenenes

Novel stereoselective synthesis of 3-azabicyclo[3.1.0]hexanes from allenenes is presented. Treatment of N-protected 4-alkyl-4-(N-allyl)amino allenes with allyl carbonate and a catalytic amount of Pd(2)(dba)(3).CHCl(3) in MeCN leads to stereoselective formation of the 3-azabicyclo[3.1.0]hexane framework in moderate to good yields. [reaction: see text]     

Dynamics of the degenerate rearrangement of bicyclo[3.1.0]hex-2-ene

Quasiclassical direct dynamics simulations are applied to a 4-fold degenerate rearrangement which yields a nonstatistical product distribution. The simulated product ratio agrees with experiment and is found to be entirely dynamically determined. Trajectory lifetimes are on the order of a low-frequency vibrational period. The interaction of reaction momentum with the geometric features of the potential surface produces selectivity despite a common energy barrier. A geometric model is described for qualitatively estimating much of the dynamically determined product ratio independently of trajectory calculations. The characteristics of this reaction are expected also to apply to others involving modestly stabilized diradical intermediates.