Method of determining the volume and shear characteristics of elastico-viscous hereditary media from uniaxial-tension (compression) experiments

A method is proposed for determining the elastic constants — instantaneous modulus of elasticity, Poisson's ratio, shear modulus, bulk modulus, and the shear and volume influence functions — the shear creep kernel, the shear creep rate kernel, and the corresponding relaxation kernels from the data of creep or relaxation tests.Moscow. Translated from Mekhanika Polimerov, No. 4, pp. 754–758, July–August, 1969.     

Viscoelastic characteristics of the interaction between structures and soils

The shear coefficients of a body relative to the soil and the shear creep and relaxation kernels are determined from the data of creep and relaxation tests.Urazbaev Institute of Mechanics and Earthquake Resistance of Structures, Academy of Sciences of the SSR, Tashkent. Translated from Mekhanika Polimerov, No. 2, pp. 207–211, March–April, 1973.     

Some relationships between the specific functions and constants of visoelastic media

It is proved that the shear, lateral creep, and relaxation functions can be expressed in an elementary way by the longitudinal creep and relaxation functions and the elasticity modulus of the bulk.I. M. Gubkin Moscow Institute of Petrochemical and Gas Industry. Translated from Mekhanika Polimerov, No. 5, pp. 810–814, September–October, 1973.     

An axisymmetric problem of viscoelasticity

The problem of a long hollow viscoelastic cylinder, enclosed in an elastic shell and loaded by internal pressure, is considered. Two cases are investigated: 1) the shear and volume relaxation kernels are proportional; 2) the shear and volume creep kernels are proportional. Resolving integral equations with singular kernels of a nondifference type are obtained and a method of solution is proposed. The convergence of the method is proved.Lomonosov Moscow State University. Translated from Mekhanika Polimerov, No. 5, pp. 798–805, September–October, 1969.     

Effect of relaxation parameters on the behavior of rigid polymers in pure shear

The authors have investigated the effect of the relaxation parameters of a rigid polymer corresponding to the individual terms of the relaxation spectrum on the nature of the theoretical curves calculated for creep, strain relaxation and loading at constant strain rate in pure shear on the assumption that the stress-strain relation is described by the generalized Maxwell equation.Institute of Chemical Physics, Academy of Sciences of the USSR, Moscow. Translated from Mekhanika Polimerov, No. 3, pp. 431–436, May–June, 1969.     

Mechanical properties of a hollow-fiber glass-reinforced plastic

The strength and elastic properties of a hollow-fiber glass-reinforced plastic are investigated together with the effect of temperature, and long-time and cyclic loading on its mechanical characteristics. The instantaneous moduli of elasticity and the creep kernel parameters are obtained on the basis of the creep diagrams.Translated from Mekhanika Polimerov, No. 2, pp. 341–345, March–April, 1971.     

Shear creep of orthogonally reinforced spherofibrous composites

Our previous theory for the viscoelasticity of spheroplastics and two-phase structural models was used to construct stress creep and relaxation operators for shear of orthogonally reinforced spherofibrous composites. The operators were constructed using the Volterra principle, Rabotnov's fraction exponential kernels, and approximate analytical relationships for the integral composite characteristics. Operators were taken incorporating data on the rheonomic characteristics of the composite, components with hybrid, hollow, and other fiber types. Approximate formulas were obtained for operators convenient for studying stress creep and relaxation in elements of three-dimensional structures.A. A. Blagonravov Mechanical Engineering Institute, Russian Academy of Sciences, Moscow. Translated from Mekhanika Kompozitnykh Materialov, Vol. 32, No. 6, pp. 770–779, November–December, 1996.     

Thermomechanical and optical properties of Makrolon

The thermomechanical and optical properties, short-time creep, recovery, vibrocreep, and the relaxation behavior of Makrolon have been experimentally investigated.Mekhanika Polimerov, Vol. 3, No. 1, pp. 46–53, 1967     

Determination of regular discrete relaxation spectra from the viscoelastic functions

A procedure for determining regular discrete relaxation spectra from the viscoelastic functions is presented as a generalization of a previously proposed procedure for determining the conditional rheological characteristics in a piecewise-exponential approximation of the experimental creep, relaxation, and – curves. The calculated data are in good agreement with the experimental results.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 5, pp. 801–807, September–October, 1971.     

Creep and long-time strength of oriented glass-reinforced plastics in interlaminar shear

The creep and long-time strength in interlaminar shear and the creep in compression in the direction of the reinforcement have been experimentally investigated for certain types of oriented glass-reinforced plastics. The specimens in the interlaminar creep tests took the form of short beams loaded in bending. The experimental creep data for shear and compression are well described by the hereditary theory with a kernel of the Abel type (shear) or in the form of a Rabotnov function (compression). If the stresses are constant in time, good agreement with experiment is also given by Findley's form of the aging theory. A deformation criterion of interlaminar shear strength is also obtained. The experimental curves and values of the creep and long-time strength constants are presented.Translated from Mekhanika Polimerov, No. 6, pp. 1003–1012, November–December, 1971.     

Static and vibrational creep of a fabric-reinforced plastic in shear in the plane of the reinforcement

The results of a comparative experimental investigation of the short-term static and vibrational creep of a fabric-reinforced plastic in shear in the plane of the reinforcement are presented. The experimental procedure is described in detail. It is shown that on the investigated ranges of temperature, stress, and amplitude-frequency parameters the effect of an additional vibrational load on the creep process is unimportant.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 4, pp. 605–610, July–August, 1971.     

Analysis of nonlinear polymer creep

The relaxation properties of polyethylene are analyzed. The nonlinear time-dependent stress-strain relations and the creep and relaxation equations are obtained from the experimental creep data. The analysis is based on an appropriate variant of the nonlinear memory theory with singular functions whose parameters, together with the modulus of elasticity, are determined by the method described in [1].Moscow. Translated from Mekhanika Polimerov, No. 3, pp. 410–414, May–June, 1969.     

Influence of temperature and humidity on the creep of polymer materials

Conclusions By analyzing the results of the original creep tests under shear and tensile conditions subject to various temperatures and humidities, and also analyzing some control experiments involving simultaneous shear and tensile strain, we have shown that the displacement function of the relaxation spectrum expressing the maintenance of the temperature-humidity-time analogy is independent of the form of the stressed state in the range of linear viscoelasticity for a Poisson coefficient close to 0.5.For Communication 2 see [2].Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 4, pp. 627–632, July–August, 1976.     

Relaxation and optical properties of cured epoxy resin

Epoxy resin cured with methyltetrahydrophthalic and maleic anhydrides has been tested in relaxation, creep, and compression at constant strain rate. The constants characterizing the relaxation properties and the approximate limits of the spectrum of most probable relaxation times have been determined; it is shown that the mechanical properties can be described by means of equations with two relaxation times. The residual optical effect has also been investigated. A linear relationship between the high-elastic strains and the path difference in the birefringent state is preserved at temperatures below the glass transition region.Read at Moscow State University polymer mechanics seminar.Moscow. Translated from Mekhanika Polimerov, No. 1, pp. 15–23, January–February, 1970.     

Nonlinear creep of a glass fabric-reinforced plastic in several complex states of stress

Tensile, compressive, torsional, and combined creep tests have been performed on tubular specimens of a glass fabric-reinforced plastic. The sign of the normal stress has been found to have an important influence on the development of the shear creep strains. The rheological parameters of the material necessary for approximating the test curves have been determined and the results of the calculations compared with experiment.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 212–218, March–April, 1973.     

Experimental determination of the transverse shear modulus of a wound glass-reinforced plastic in creep

It is proposed to determine the interlayer shear modulus in creep starting from the results of bending tests on simply supported beams with a concentrated load. It is assumed that the increase in deflection with time is caused by interlayer creep. The data of creep tests on wound glass-reinforced plastic beams are presented and used to determine the long-time interlayer shear modulus.Leningrad. Translated from Mekhanika Polimerov, Vol. 5, No. 2, pp. 370–372, March–April, 1969.     

Investigation of the relaxation process in polycarbonate film

The temperature relaxation of polycarbonate film and the accompanying change in the birefringence path difference are considered. It is shown that at a temperature of about 170°C intense crystallization takes place in the film. The deformation modulus is a function of the density of the network and its degree of orientation. The variation of these parameters with the stretch ratio and temperature is determined experimentally. The creep of polycarbonate film is considered and correlated with the curves representing the fall in the number of chains of the molecular network in pure relaxation.Mendeleev All-Union Scientific-Research Institute of Metrology, Leningrad. Translated from Mekhanika Polimerov, No. 1, pp. 72–76, January–February, 1973.     

Intensity of the relaxation processes in statically loaded,highly oriented synthetic fibers

An experimental study of the stress relaxation and creep of a series of synthetic fibers has revealed a reduction in the intensity of these processes as the tensile strain increases. On the basis of a comparison of the relations obtained and the results of previous studies of loaded oriented polymers using small-angle x-ray scattering and NMR techniques it is suggested that the observed effect is attributable to orientational ordering of the through macromolecules in the amorphous regions of the fiber. It is also concluded that in oriented polymers at strains considerably below breaking values the elementary relaxation events are physical (and not mechanochemical) in nature.Kirov Leningrad Institute of the Textile and Light Industries. Translated from Mekhanika Polimerov, No. 1, pp. 154–157, January–February, 1973.     

Evaluation of integral operators of viscoelasticity

A method of calculating the integral operators of viscoelasticity from arbitrary continuous functions is proposed for the case where the relaxation (creep) function is given in tabulated or graphic form. The problem of constructing the creep function from an experimentally known relaxation function is solved.Moscow Institute of Electronic Machine Building. Translated from Mekhanika Polimerov, No. 6, pp. 1115–1117, November–December, 1973.     

Creep of fluoroplastic under the joint action of tension and hydrostatic pressure

Conclusions 1. The effect of hydrostatic pressure on the creep of Teflon has been investigated under isothermal conditions. The applicability of the principle of reduced variables for reduction of creep curves with respect to pressure has been shown.2. It has been ascertained that in the pressure region from atmospheric to 1600 kgf/cm² there are two subregions, which are separated by a transition at a pressure of 700–800 kgf/cm². It has been shown that in these subregions the occurrence of relaxation processes has different characters.3. A direct measurement of the free volume of Teflon has been made in the temperature range from 40 to 120°C. A sharp increase in free volume in the region of the temperature transition has been shown.Leningrad Technological Institute of the Refrigeration Industry. Okhtinsk Scientific and Industrial Union "Plastpolimer," Leningrad. Translated from Mekhanika Polimerov, No. 3, pp. 434–438, May–June, 1977.