氢化物发生–原子吸收光谱法测定铅粉中痕量砷、锑

建立氢化物发生–原子吸收光谱法联用测定铅粉中痕量砷、锑的方法。试样用稀硝酸溶解,用5%抗坏血酸溶液作为砷(Ⅴ)、锑(Ⅴ)的预还原剂,5%的硫脲溶液作为其它元素的掩蔽剂,选用1%硼氢化钠溶液作为还原剂,氢化物反应在10%盐酸介质中进行。在优化的试验条件下,砷、锑的质量浓度在0~20 ng/m L范围内与吸光度线性相关,相关系数r2分别为砷0.999 6,锑0.993 8,方法的检出限分别为砷0.40 ng/m L,锑0.75 ng/m L。砷、锑测定结果的相对标准偏差分别为4.96%,6.27%(n=6),铅粉样品加标回收率分别为砷87.6%,锑79.3%。该方法准确可靠,可用于测定铅粉中痕量砷、锑。     

双道氢化物发生-原子荧光光谱法同时测定核电用钢中痕量砷和锑

建立了双道氢化物发生-原子荧光光谱法同时测定核电用钢中痕量砷和锑的新方法。用王水溶解样品,以2.0 g/L L-半胱氨酸溶液作为预还原剂,在低酸度条件下实现对砷、锑的预还原。用20 g/L硼氢化钾溶液作为还原剂,氢化物发生反应在0.5 mol/L乙酸介质中进行。砷、锑的质量浓度在40μg/L范围与相应的荧光强度呈线性关系,方法的检出限(3s/k)分别为0.032μg/L和0.022μg/L。应用此方法同时测定了核电用钢及不锈钢标准样品中的砷锑含量,并与电感耦合等离子体原子发射光谱法的分析结果作了对比,测定值与标准样品的标准值相符,结果的相对标准偏差(n=8)均小于5.0%。     

氢化物发生中高浓度钴对砷锑铋测定的影响及消除

研究了高浓度钴对砷、锑、铋氢化物发生的影响,通过提高溶液酸度和加入大量的硫脲-抗坏血酸-盐酸羟胺作为还原掩蔽剂的办法消除高浓度基体对测定的影响,实现了氢化物发生原子荧光光谱法直接测定氧化钴中的痕量砷、锑、铋,无需基体分离或基体匹配,方法简便快速.检出限(S/N=3):砷0.29 μg/L,锑0.26 μg/L,铋0.24 μg/L;回收率为90% ～114%;样品分析相对标准偏差为2.1% ～9.8%(n=5).     

氢化物发生–原子荧光光谱法同时测定锌锭中砷和锑

建立用氢化物发生–原子荧光光度计同时测定锌锭样品中砷和锑含量的方法。采用硝酸一次溶样,加入酒石酸防止锑水解。加入硫脲–抗坏血酸混合溶液作为还原剂和掩蔽剂,消除干扰元素的影响,对实验条件进行了优化。砷和锑的负高压分别为220,200 V,灯电流分别为80,60 mA,还原剂为1%硼氢化钾溶液(含0.5%KOH),载流为10%盐酸溶液,还原时间为30 min。测定砷的线性范围为0~80 ng/mL,相关系数r=0.999 8,检出限为0.35μg/L,测定结果的相对标准偏差为3.18%(n=11);测定锑的线性范围为0~80 ng/mL,相关系数r=0.999 6,检出限为0.42μg/L,测定结果的相对标准偏差为4.32%(n=11),砷和锑的加标回收率在97.46%~100.30%之间。用该方法对标准样品进行测定,测定结果与标准值相符。该方法基体干扰少,灵敏度高,适合于锌锭中砷和锑的日常测定。     

共沉淀富集氢化物发生-原子荧光光谱法同时测定山药中砷和硒

建立了共沉淀富集氢化物发生-原子荧光光谱法同时测定山药中痕量砷、硒。考察了共沉淀剂种类、用量,pH值及硼氢化钾浓度的影响。在优化实验条件下,在0～40μg/L范围内,砷、硒的线性相关系数分别为0.994、0.9967,检出限分别为0.0007μg/L、0.0011μg/L,相对标准偏差砷为1.06%、硒为0.77%。该法用于山药中砷、硒的测定,其平均加入回收率分别为95.4%和90.6%。该方法样液用量少,操作简便,适用于食品中痕量砷、硒的测定。     

密闭罐溶样–氢化物发生–原子荧光光谱法测定中药中的汞和砷

建立了密闭罐溶样–氢化物发生–原子荧光光谱法测定中药中痕量汞和砷的分析方法。采用密闭罐溶解复杂基体中药样品,进行易挥发元素分析的样品前处理,技术简单,快速,能耗低。汞和砷的质量浓度分别在0~10μg/L和0~200μg/L范围内与荧光强度成线性关系,线性相关系数均大于0.99。汞、砷的检出限分别为0.014,0.086μg/L;测定结果的相对标准偏差不大于4.67%(n=5);加标回收率分别为99.0%~106.4%,95.2%~101.7%。该方法操作简便,可用于中药中汞、砷元素的质量控制。     

氢化物发生-双道原子荧光光谱法同时测定钢中砷和锑

建立了一种氢化物发生双道原子荧光光谱法同时测定钢中痕量砷和锑的方法．对实验条件进行了优化,在最佳工作条件下,砷和锑的检出限分别为0．012ng／g和0．034ng／g,RSD分别为1．24％和1．97％．将本法应用于钢中的砷和锑的测定,采用加标回收实验控制方法的准确性,砷的回收率为96％～98％,锑的回收率98％～102％．     

布洛芬注射液包材相容性研究中铅、镉、砷、锑的测定

建立中性硼硅玻璃包材加速试验后布洛芬注射液中铅、镉、砷、锑含量的检测方法。采用微波消解仪以硝酸分解样品,用石墨炉原子吸收光谱仪测定铅、镉含量,测定波长铅为283.3 nm,镉为228.8 nm,铅、镉分别在5.0~50.0,0.5~5.0μg/L范围内有良好的线性,相关系数分别为0.999 7,0.996 2,检出限分别为0.26,0.01μg/L,测定结果的相对标准偏差分别为1.06%,2.40%(n=6),加标回收率分别为100.2%~101.9%,97.1%~105.1%。用原子荧光光谱仪测定砷、锑含量,测定波长砷为193.7 nm,锑为217.6 nm,砷、锑在1~10μg/L范围内均有良好的线性,相关系数分别为0.999 9,0.999 5,检出限分别为0.03,0.01μg/L,测定结果的相对标准偏差分别为1.04%,2.65%(n=6),加标回收率分别为94.2%~96.5%,92.6%~96.5%。该测定方法快速,灵敏度高,适用于内包装材料加速试验后药品中重金属元素含量变化的研究。     

氢化物发生-原子荧光光谱法测定鹿茸中的总砷

研究了氢化物发生-原子荧光光谱法测定鹿茸中总砷的分析方法。采HNO3-HCl O4混合酸(V:V=8:1)消解样品,以2%HCl介质作为载流,样品酸度控制在10%时进行样品分析。方法的线性范围0~10μg/L,相关系数优于0.999,检出限0.04μg/L,相对标准偏差3.2%,加标回收率96.0%~102.0%。     

纳米Fe3O4分离富集-悬浮进样-氢化物发生原子荧光法测定砷形态

研究了以纳米Fe3O4为固相吸附剂对痕量无机砷形态的吸附与分离富集,建立了无需洗脱分离的悬浮进样-氢化物发生-原子荧光法测定砷形态的方法。选择的反应体系为0.64 g/L Fe3O4悬浮液-1.0%(m/V)NaBH4溶液-5.0%(V/V)HCl(pH 8),进样5.0 mL时,得到本方法的检出限为13.5 ng/L;As(Ⅲ)浓度在0.05～3.5μg/L范围内呈良好的线性关系;测定0.5μg/L As(Ⅲ)的精密度RSD=3.4%。用国家标准物质GBW10010(大米)验证了本方法测定砷的准确性,测定结果(0.101±0.010μg/g)与标准值(0.102±0.008μg/g)吻合。采用本方法测定了近海海水和雪水样品中的无机砷形态,并进行了加标回收实验。对As(Ⅲ)和As(Ⅴ)的加标回收率在95%～110%之间,结果令人满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.