Photoinduced two-dimensional gratings based on dye-doped cholesteric liquid crystal films

This work elucidates photoinduced two-dimensional (2D) gratings in dye-doped cholesteric liquid crystal films. The helical pitch is increased by green-beam-induced trans-cis isomerization and a concomitant thermal effect. Two-dimensional gratings appear when the green beam is turned off. Grating formation results from elastic instability caused by restored strain arising from helical pitch reduction. Grating lifetime increases as green beam intensity increases and declines under irradiation with a strong red beam. Variation in grating spacing with green intensity with various pitches is also examined.     

Dynamics of biphotonic intensity holographic gratings based on dye-doped liquid crystal films

The dynamics of biphotonic intensity holographic gratings (BIHGs) based on dye-doped liquid crystal (DDLC) films, including optical and thermal effects, are studied. Experimental results indicate that the formation of a BIHG involves bulk reorientation and surface adsorption. The former yields a transient biphotonic grating; the latter results in a persistent biphotonic grating. Additionally, the dynamic behaviours of the biphotonic diffraction signals are different from those of a conventional one-photonic diffraction signal, and depend on the intensity(polarization) of the green(red) pump-beam. The effect of ambient temperature on the diffraction efficiency of a BIHG is also studied: a higher ambient temperature prevents more dye molecules from being adsorbed on the substrate.     

New developments in the dye-doped polymer dispersed liquid crystals gratings: A review

In this study, the dye-doped polymer dispersed liquid crystals (PDLC) gratings techniques performed by the various research groups or being developed are briefly reviewed. Especially, the electrically switched diffraction and holographic gratings, have attained much attention by various research groups working in the PDLC-related display studies. The fabrication methodologies used for such grating texture, include like the conventional dye-doped PDLC grating, Azo-dye doped PDLC gratings, and lasing techniques etc., adopted for dye-doped PDLC gratings. The useful features and characteristics of their fabrication process of such gratings are discussed. Finally, some of the future perspectives on this particular research field are presented.     

Ferroelectric liquid crystal composites based on the porous stretched polyethylene films

Electro-optically active polymer–liquid crystal composites based on ferroelectric liquid crystals and stretched porous polyethylene films were developed. The alignment of ferroelectric liquid crystals incorporated into the porous polyethylene films with average porous diameter of around 200 nm was observed and studied. It was shown experimentally that these samples containing ferroelectric liquid crystals are flexible electro-optical films exhibiting a saturation electric field near 2·10⁷ Vm^?1 and a response time of about 30 μs under the action of the saturation field. A simple theoretical model of ferroelectric liquid crystal molecules' complete reorientation in electric fields inside pores of the films has been proposed and confirmed experimentally.     

Instabilities of nematic liquid crystal films

We discuss instabilities exhibited by free surface nematic liquid crystal (NLC) films of nanoscale thickness deposited on solid substrates, with a focus on surface instabilities that lead to dewetting. Such instabilities have been discussed extensively; however, there is still no consensus regarding the interpretation of experimental results, appropriate modeling approaches, or instability mechanisms. Instabilities of thin NLC free surface films are related to a wider class of problems involving dewetting of non-Newtonian fluids. For nanoscale films, the substrate–film interaction, often modeled by a suitable disjoining pressure, becomes relevant. For NLCs, one can extend the formulation to include the elastic energy of the NLC film, leading to an ‘effective’ disjoining pressure, playing an important role in instability development. Focusing on thin film modeling within the framework of the long-wave asymptotic model, we discuss various instability mechanisms and outline problems where new research is needed.     

Tuning the lasing wavelength of dye-doped chiral nematic liquid crystal by fluid flow

The influence of hydrodynamic flow on the lasing wavelength and stability of the laser emission average power of a dye-doped chiral liquid crystalline (DDCLC) structure is studied. Multiple lasing peaks at equidistant wavelengths are observed, which are originating from multiple domains that are induced by the hydrodynamic flow of the DDCLC. A simultaneous blue shift over 4 nm for all lasing peaks is observed after increasing the flow velocity to 0.3 mm/s for cells with a thickness of 10 μm. It is observed that the CLC flow dramatically increases the stability of the laser emission compared to conventional cells because dye bleaching and LC molecular reorientation due to pumping beam is reduced.     

Simultaneous control of haze and transmittance using a dye-doped cholesteric liquid crystal cell

We propose a light shutter device using dye-doped cholesteric liquid crystals for a high-visibility see-through display. In the focal-conic state, the proposed device can perfectly block the background image through simultaneous use of light scattering and absorption effects in a single-layered structure. By switching the proposed device placed at the backside of a see-through display, we can choose transparent or high-visibility display modes in a see-through display.     

Spontaneous polarization and electro-optic behaviour of a ferroelectric liquid crystal cell fabricated with polyimide Langmuir-Blodgett films

The spontaneous polarization and electro-optic response of ferroelectric liquid crystals (FLCs) were investigated in a cell fabricated with a polyimide alignment layer coated by the Langmuir-Blodgett method. The surface properties of the cured polyimide layers were monitored by contact angle measurement, and by FTIR spectroscopy and AFM for the orientation and surface roughness, respectively. The apparent spontaneous polarization of an FLC determined in a practical sandwich-cell depended on various conditions such as cell thickness, cooling rate from the smectic A to chiral smectic C phase, and deposition pressure. Electro-optic response and decay times of FLCs were also measured. Furthermore, the ions in the FLC mixture reduced the magnitude of the effective electric field, but had no effect at high frequency.     

Liquid crystal orientation by holographic phase gratings recorded on photosensitive Langmuir-Blodgett films

Holographic gratings were recorded on photosensitive Langmuir-Blodgett films characterized by UV spectroscopy, birefringence measurements and atomic force microscopy. Different polarizations of Ar laser writing beams create particular patterns of chromophore orientation in the diffraction spots. The gratings were shown to orient a nematic liquid crystal with the director parallel to the axes of the chromophores predetermined by film irradiation. In the case of the sp grating (recorded with laser beams polarized perpendicular to each other), two equivalent easy directions for the liquid crystal orientations at 90degree with respect to each other were observed; that is a quasi-bistable anchoring interface had been prepared. Measurements of the pretilt angles theta1s and anchoring energy Ws of 5CB on different holographic gratings show that this orientation technique is very promising for display technology.     

Molecular simulation of liquid crystal sensor based on competitive inclusion effect

With the progressive understanding of liquid crystal materials that rely on the interface interactions, optical properties of liquid crystal are attracting attention as a detector for chemicals and biomolecules. In this work, a recently reported liquid crystal sensing system based on the competitive inclusion effect of β-cyclodextrin (β-CD) was studied. Quantum mechanical calculations were applied to study different β-CD inclusion complexes of methyl blue (MB), 4-cyano-4′-pentyl biphenyl (5CB), sodium dodecyl sulfonate (SDS), dopamine (DA) and their inclusion processes. The work shows that DA cannot be an analyte for the liquid crystal sensor as it could not compete for the cavity of β-CD with SDS. However, MB molecule can push SDS out of the β-CD cavity so as to induce the change in optical appearance when MB forms a 1:2 inclusion complex. The simulated absorption spectrum is in agreement with experiment results, implying that MB molecule may exist in both 1:1 and 1:2 inclusion complexes in the system of liquid crystal sensor.     

Switchable polarisation-independent blue phase liquid crystal Fresnel lens based on phase-separated composite films

A simple method for fabricating a polarisation independent blue-phase liquid crystal Fresnel lens (BPLCFL) is demonstrated by utilising the photo-polymerisation-induced phase separation. The BPLC/polymer binary Fresnel zones is obtained well by periodic UV illumination with phase separation of the BPLC molecules and UV-curable pre-polymer mixture. The diffraction efficiency can be controlled when applying a uniform electric field which modulates the phase difference between even and odd Fresnel zones. Experimental results show that the maximum diffraction efficiency reaches 24.3%, which is close to the measured diffraction efficiency of the used Fresnel zone-plate mask of 25%. We also characterise the tunable lens performance at different applied voltages.     

Fast polarisation-insensitive optical shutter supported by backflow in dichroic dye-doped dual-frequency liquid crystal

This paper describes a novel implementation of a dual-frequency liquid crystal optical shutter of the guest–host type. The transmissive state of the filter is obtained by applying a low-frequency electric field that brings the dichroic dye in a homeotropic orientation. The light-absorbing state is realised by a twisted planar configuration for which the absorption is quasi-independent of the polarisation. Switching between the two states occurs in about 1 ms and the devices show no scattering for wavelengths inside or outside the absorption band of the dichroic dye. Simulations and experiments reveal how a twisted state is obtained through the backflow phenomenon.     

NMR polarization echoes in a nematic liquid crystal

We have modified the polarization echo (PE) sequence through the incorporation of Lee-Goldburg cross polarization steps to quench the 1H-1H dipolar dynamics. In this way, the 13C becomes an ideal local probe to inject and detect polarization in the proton system. This improvement made possible the observation of the local polarization P(00)(t) and polarization echoes in the interphenyl proton of the liquid crystal N-(4-methoxybenzylidene)-4-butylaniline. The decay of P(00)(t) was well fitted to an exponential law with a characteristic time tau(C) approximately 310 micros. The hierarchy of the intramolecular dipolar couplings determines a dynamical bottleneck that justifies the use of the Fermi Golden Rule to obtain a spectral density consistent with the structural parameters. The time evolution of P(00)(t) was reversed by the PE sequence generating echoes at the time expected by the scaling of the dipolar Hamiltonian. This indicates that the reversible 1H-1H dipolar interaction is the main contribution to the local polarization decrease and that the exponential decay for P(00)(t) does not imply irreversibility. The attenuation of the echoes follows a Gaussian law with a characteristic time tau(phi) approximately 527 micros. The shape and magnitude of the characteristic time of the PE decay suggest that it is dominated by the unperturbed homonuclear dipolar Hamiltonian. This means that tau(phi) is an intrinsic property of the dipolar coupled network and not of other degrees of freedom. In this case, one cannot unambiguously identify the mechanism that produces the decoherence of the dipolar order. This is because even weak interactions are able to break the fragile multiple coherences originated on the dipolar evolution, hindering its reversal. Other schemes to investigate these underlying mechanisms are proposed.     

Vertical alignment of liquid crystal on tocopherol-substituted polystyrene films

We synthesised a series of vitamin-based and renewable tocopherol-substituted polystyrene (PTOC#, # = 20, 40, 60, 80 and 100), where # is the molar content of tocopherol moiety, using polymer analogous reactions to investigate their liquid crystal (LC) alignment properties. In general, the LC cell fabricated using the polymer film having a higher molar content of tocopherol side group showed vertical LC alignment behaviour. The vertical alignment (VA) behaviour was well correlated with the surface energy value of these polymer films. For example, VA was observed when the surface energy values of the polymer were smaller than about 35.22 mJ/m² generated by the nonpolar tocopherol moiety having long and bulky carbon groups. Good electro-optical characteristics, such as voltage holding ratio and residual DC voltage, and aligning stabilities at 200°C and ultraviolet irradiation of 10 J/cm² were observed for the LC cells fabricated using PTOC100 as a LC alignment layer. Therefore, it was first found that the renewable tocopherol-based materials can produce an eco-friendly vertical LC alignment system.     

The complete morphological,electro-optical and dielectric study of dichroic dye-doped polymer-dispersed liquid crystal

Polymerisation-induced phase separation method was used to prepare dye-doped polymer-dispersed liquid crystal (DPDLC) films consisting of nematic liquid crystal, photo-curable pre-polymer and a dichroic dye. The change occurring on droplets morphology with the change in dye concentration and voltage was investigated by means of polarising optical microscope and scanning electron microscope. Electro-optic behaviour of these composite films in the presence of an externally applied AC electric field (0–100 V, 200 Hz) and temperature range 25–50°C was evaluated using He–Ne laser. The maximum absorbance of dye and effect of electric field on the absorbance of dye was studied using UV-Vis spectrophotometer. Dielectric relaxation spectroscopy was carried out in the frequency range 20 Hz–20 MHz and over the temperature range 25°C–90°C. Dielectric parameters such as distribution parameter, relaxation frequency, relaxation strength and relaxation time of these DPDLC films were calculated, and the modelling of experimental data was done using Debye and Cole–Cole method.     

Effects of alkyl chain length of monomer and dye-doped type on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Polymer-dispersed liquid crystal (PDLC) films containing a series of monomers with different alkyl chain lengths were prepared by nucleophile-initiated thiol-ene click reaction. The effect of alkyl chain length of monomers, dye and temperature on electro-optical properties of PDLC films was investigated. It was found that the alkyl chain length and polymerisation rate of monomers together determine the size of liquid crystal (LC) droplets, thus affecting the electro-optical properties of PDLC. In addition, the type and content of dyes could be optimised to obtain PDLC materials with better comprehensive properties for display.     

Supercritical fluid swelling of liquid crystal films

The influence of liquid and supercritical carbon dioxide and liquid propane on the structural properties of both ionic and nonionic surfactant-based liquid crystal films is discussed in this paper. Swelling of the films, measured using in situ small-angle neutron scattering (SANS), was found to be dependent on the solubility of the propane/carbon dioxide in the micelles of the respective liquid crystals. Additionally, under certain pressure conditions the structural properties of some of the films were observed to change, ultimately leading to a loss of order in the micellar arrays of the liquid crystals.     

Superior electro-optical performance in vertically aligned liquid crystal devices based on aluminum oxide films

We achieved vertically aligned (VA) liquid crystals (LCs) on aluminum oxide (Al₂O₃) films deposited via e-beam evaporation using a rubbing treatment. Uniform and vertical LC alignment was achieved and high thermal stability was obtained using these substrates. By analyzing measurements from optical retardations, we confirm that the LC orientation is adjustable using rubbing treatment. The superior electro-optical characteristics of the VA cells based on Al₂O₃ films are measured and compared with those based on polyimide layers, indicating that this approach will allow the fabrication of high-performance, advanced LC displays using a conventional rubbing process.     

Fluorescence behaviour of cyanobiphenyl liquid crystal molecules in liquid crystal/polymer composite films

The fluorescence behaviour of the liquid crystal, 4-cyano-4-pentylbiphenyl (5CB), in composite thin films prepared by the photopolymerization of 5CB/diacrylate mixtures, was investigated by means of three different excitation methods, in which the total-internal-reflection or surface-limited excitation method was used for analysis of the fluorescence from an ultra-thin interface layer ( 100nm) in contact with the substrate surface, whereas the fluorescence from the interior bulk was analysed by the through-film excitation method. It was found that intensity ratios of the monomer and excimer emissions of 5CB are significantly lower in the interface layer than in the interior bulk, depending upon photopolymerization conditions as well as upon the structures of the diacrylates used. Scanning electron microscopic observations and light-scattering measurements of some typical composite films showed possible relationships between morphological features and fluorescence characteristics depending upon the diacrylate structures and polymerization conditions. The different fluorescence behaviour has been discussed in terms of differences in mobility and/or aggregation degrees of 5CB molecules arising from dominant molecular interactions with the substrate and polymer surfaces.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .