Instrumental neutron activation analysis applied to the determination of the chemical composition of metallic materials with study of interferences

Summary Instrumental neutron activation analysis was applied to evaluate the chemical composition of metallic materials, namely iron, steel, silicon and ferrosilicon certified reference materials. As, Co, Cr, Mn, Mo, Ni, V and W concentrations were analyzed in the iron and steel samples whereas 21 elements were determined in silicon and ferrosilicon samples. Accuracy and precision results of about 10% were achieved for most elements, indicating that the technique is suitable for the analysis of metallic materials. Interferences of Cr and Mn in V; Fe and Co in Mn; Co in Fe and Cr in Ti were quantified and only the last one was critical to the analysis of the materials employed in this work.     

Determination of impurities in nuclear fuel element components by neutron activation analysis

Neutron activation analysis methods for the determination of impurities in zirconium cladding material and uranium oxide are described. Detection limits for the elements Al, Cd, Cr, Co, Cu, Hf, Fe, Mn, Ni, W and U in zirconium are below that required by the ASTM B 352-79 standard. The method has been tested on the NIST SRM 360a Zircaloy-2 from which the elements Na, Mg, Al, Ca, V, Cr, Fe, Co, Ni, Cu, Eu and U have been detected. The values for Cr, Fe, Ni and Cu are compared with the certified values. A method for the pre-irradiation separation of the elements Mg, Na, Al, K, Sc, Ca, V, Mn, Cr, Fe, Co, Cu, Zn, Rb, Zr, Cd, Cs, REE and Hf from uranium has been developed. A neutron activation analysis method for the determination of those elements in uranium is described. The method is tested by the analysis of the IAEA reference sample SR-54/64. The elements Al, Mn, V, Cu, Cr, Co, Ni and Fe have been detected and the results compared with the certified values.     

Elektrolytische L?sungsherstellung zur Stahlanalyse mit der ICP-Spektrometrie

Zusammenfassung Die Lösungsherstellung für die Stahlanalyse mit der ICP-Spectrometrie erfolgt durch Elektrolyse in HCl. Zahlreiche Elemente (wie Al, Si, Mn, Cr, Ni, Co) können in unlegierten und niedriglegierten Stahlproben mit C-Gehalten unter 0.3% bestimmt werden.

---

Electrolytic preparation of solution for steel analysis by ICP spectrometry

Summary The preparation of solutions for steel analysis by ICP spectrometry is performed by electrolysis in HCl. Numerous elements (as Al, Si, Mn, Cr, Ni, Co) can be determined in unalloyed and low-alloy steel with C-contents of less than 0.3%.

     

Simultanbestimmung von Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co und As in St?hlen mit ICP-AES

Summary A universal method for quantitative analysis of twelve elements in low-alloy steels is described. The samples are digested in a mixture of sulfuric-/nitric acid/ammonium peroxodisulfate. Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co, As are determined in solution by ICP-AES. The procedure was tested with NBS and BCS reference samples. The analytical results are in good agreement with the certified values. With slight modifications, the method is applicable to the analysis of high-alloy steel samples.     

Multielemental Analysis of Human Serum by Dynamic Reaction Cell–Inductively Coupled Plasma Mass Spectrometry

The selection of the most suitable dilution methods for determination of trace elements in human serum using inductively coupled plasma mass spectrometry is reported. The trace elements were Al, V, Cr, Fe, Mn, Co, Cu, Zn, As, Cd, Sn, Tl, and Pb. The performance of various dilution methods was assessed by precision, linearity, detection limits, quantification limits, fortified recoveries, and the analysis of reference materials. The results demonstrate that diluted solution containing only nitric acid is most suitable for As, Cr, Mn, and Co in serum. Dilute solutions containing nitric acid and Triton X-100 were most appropriate for Cu, Zn, Cd, and Tl. The optimum conditions for Al, V, Mn, Fe, Cr, Co, Sn, and Pb used tetra-n-butylammonium hydroxide, Triton X-100, and ethylenediamine tetraacetic acid.     

Determination of elements in SRM soil 2709a by neutron activation analysis

A combination of instrumental neutron activation analysis (INAA) and prompt gamma-ray activation analysis (PGAA) was used to value assign 35 elements in SRM soil 2709a (San Joaquin Soil). INAA with counting of short-lived radioisotopes was used for determination of Al, Au, Ca, Dy, K, Mg, Mn, Na, Ti, and V. Elements determined by INAA with counting of intermediate and long-lived radioisotopes included As, Ba, Ce, Co, Cr, Cs, Eu, Fe, Hf, La, Lu, Nd, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Yb, Zn, and Zr. Thermal neutron PGAA was used for the determination of H, B, Si, K, Ti, Mn, Fe, Cd and Gd. Expanded uncertainties were determined for all values reported.     

前列舒通胶囊中26种无机元素的分析

目的：明确造成前列舒通胶囊不同批次间差异的标志性无机元素,并进行安全性评价。方法：采用ICP-MS测定制剂中Al、As、B、Ba、Ca、Cd、Co、Cr、Cu、Fe、K、Mg、Mn、Mo、Na、Ni、Pb、Sb、Se、Sn、Sr、Ti、Tl、V、Zn和Hg元素含量并进行数据分析。运用主成分及综合评分结合聚类分析手段,确定制剂的特征性元素;进行元素含量和相关性分析,明确不同批次各元素的差异及元素之间的关系;以多元素含量为指标,绘制无机元素谱图。结果：19批样品中均未检测出Se、Mo、Sn、Sb、Tl和Hg,且Pb、Cd、As、Cu、Hg均符合限量标准,无机元素含量谱图趋势一致。主成分分析提取了4个主成分,确定元素B、K、Al、V、Cr、Ca、Ti、Na、Co和Mn可作为特征元素。主成分得分图将19批样品分为两类,聚类分析及综合评分结果与其一致,两类样品中各元素含量存在差异性。相关性分析中,明确了B与K、Al、Cr正相关,K与Cr、Co正相关,V与Cr、Mn正相关,Mn与Co正相关,Ca、Ti、Na两两正相关。结论：通过分析前列舒通胶囊中无机元素含量,确定了特征元素,为前列舒通胶囊质量全面控制研究提供科学依据。     

Simultaneous multi-element analysis of trace elements in soil samples by means of high-resolution inductively coupled plasma sector field mass spectrometry (SF-ICP-MS)

The potential of SF-ICP-MS for trace element analysis in complex environmental matrices such as soil solutions was investigated. Spectral interferences found in mass spectra of soil matrices are presented in detail. Furthermore, the influences of single components of the soil matrix on the signal intensity of selected elements were studied. Detection limits of different elements are presented with respect to the composition of the matrix. A fast and accurate method for quasi-simultaneous determination of Al, Si, P, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, As, Se, Sr, Mo, Cd, Sn, Hg and Pb in aqueous soil extracts was established.     

Major elements as possible factors of trace element urban pedochemical anomalies

The relationship between real total contents of the major elements Na, Mg, Al, Si, P, S, K, Ca, Ti, Fe and the trace elements Ag, As, B, Ba, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Sn, V, U, Zn in topsoil from the central part of Vilnius is analysed. The amounts of most elements were determined by energy-dispersive X-ray fluorescence, while amounts of Ag, B, Co were measured by optical atomic emission spectrophotometry. Two factors were distinguished according to major elements: anthropogenic (A) including Ca, Mg, Fe, P, S and clayey (C) including K, Al, Ti. Boron, Mn, Cr and U are significantly correlated with members of both factors, Sb with none of them and other trace elements either with all (Cu, Zn, Pb, Se, Ba, Ni, Co) or with separate (V, Ag, Sn, Mo, As) members of the A-factor. Only B, Mn, Cr, U (partly their additive index Z1) are influenced by the C-factor, while twelve other trace elements (also their additive index Z2) are influenced by the A-factor. The additive index Z of all 17 elements is also affected by the A-factor. Four groups of sites have been distinguished according to normal or higher contents of both factors. The majority of trace element anomalies are related to the sites affected by the A-factor.     

直读光谱法测定铬不锈钢中的元素含量

研究了铬不锈钢中Al、C、Co、Cr、Mn、Mo、Ni、P、S、Si、Ti、V、W等13种元素的直读光谱分析方法。采用两套标准样品建立标准工作曲线。弥补了单套标准样品标准工作曲线的不足。用该方法对铬标准样品进行测定,测定结果与国标法测定结果基本一致,短期精密度和长期精密度分别小于2．92％和4．88％。     

全谱直流电弧发射光谱法同时测定钼样品中17种杂质元素

为了解决现有测定方法中样品前处理复杂、测定过程繁琐的问题,研究了直流电弧发射光谱法测定钼样品中Al、Bi、Ca、Cd、Co、Cr、Cu、Fe、Mg、Mn、Ni、Pb、Sb、Si、Sn、Ti、V等17种元素的方法。用石墨粉(98%)、碳酸钠(1%)和氟化钠(1%)作为光谱缓冲剂抑制基体元素蒸发、稳定弧焰、促进杂质元素的蒸发;采用样品装满电极后下压2 mm和滴加蔗糖乙醇水溶液(2%)的方式,防止喷溅的发生,稳定激发过程,减小基体干扰;对挥发难易程度不同的元素采用信号分段采集的方式,提高各元素信噪比。方法灵敏度高、分析速度快、操作简便,加标回收率为85%~120%,各元素分析精密度均小于15%。     

Determination of trace elements by inductively coupled plasma mass spectrometry of biomass and fuel oil reference materials using milligram sample sizes

Most of the analytical techniques used to quantify elements associated with solid samples suffer from high detection limits and cannot be used for trace elements in biomass samples, particularly when only 20 mg are available for analysis. Inductively coupled plasma mass spectrometry (ICP-MS) can achieve detection limits of parts-per-trillion with liquid sample introduction by solution nebulisation. This technique was therefore tested with two standard biomass reference materials: oriental tobacco leaves and cabbage leaves. Two preparations successfully used on coal standards were used to digest the solid samples: a total digestion method (wet ashing digestion) and a partial leaching (microwave extraction). The concentrations of up to seventeen elements (As, Ba, Be, Cd, Co, Cr, Cu, Ga, Mn, Mo, Ni, Pb, Sb, Se, Sn, V and Zn) were measured after the two preparations. The accuracy and sensitivity of the measurements improved when the dilution factor decreased from 5000 to 1000 and to 500. Since the proportion of mineral matter in biomass samples is small (5%), the microwave digestion extracted elements that are generally not completely extracted from coal samples (e.g. Sb). However, some trace element concentrations were below the limit of quantification after microwave extraction, even with a reduced dilution factor (As, Se and Mo) and could not be quantified. A fuel oil was also digested. The trace element concentrations were very low (between 28 and 0.1 microgram g(-1)) but acceptable results were obtained by applying a dilution factor of 100. Only six elements in the fuel oil (As, Ba, Co, Ni, Se and V) had certified or indicated values. Factors affecting the accuracy and sensitivity of the analyses are discussed. The reproducibility of analysis of the tobacco leaf standard was checked over a period of nine months by both digestion methods. The wet ashing method gave acceptable reproducibility for Ba, Cd, Co, Cu, Ga, Mn, Mo, Ni, Pb, V and Zn but poor precision for Cr, Se and Sn and showed evidence of residual chloride interference for As. The microwave extraction gave good reproducibility for As, Ba, Cd, Co, Cr, Cu, Mo, Ni and Zn but poor precision for Se and low recoveries for Ga, Mn, Sn and V. In spite of the small quantities of material analysed, it proved possible to determine the trace elements at levels down to 0.1 microgram g(-1) in the reference materials.     

A contribution to the characterization of the aerosol sources in São Paulo

Fine and coarse particles in suspension in the atmosphere were collected on two Teflon filters with a dichotomous sampler. The concentration of Al, Br, Ca, Ce, Cl, Co, Cr, Fe, K, La, Mn, Na, P, Pb,, S, Sb, Sc, Se, Si, Sm, Th, V and Zn was determined by ED-XRF and INAA. The elemental concentration was analyzed by means of linear correlation coefficients, enrichment factors and principal factors analysis in order to identify the aerosol sources. The main sources of the aerosol particles were the marine ones, resuspended soil, fuel-oil combustion, phosphatic rocks, refuse incineration and residual high-temperature processes.     

高炉生铁化学分析用与光谱分析用国家标准样品的研制

在冶炼、铸造、加工等操作中采取多种工艺措施,研制了高炉生铁化学分析用与光谱分析用国家标准样品,对研制的标准样品进行严格的均匀性和稳定性检验.由国内8家具有资质的分析实验室参与协作定值.定值元素达19项(C,Si,Mn,P,S,Cr,Ni,Cu,Mo,V,Ti,Co,Als,Alt,As,Sb,Sn,Pb,Zn等).分析...     

Determination of 24 elements in four algae reference materials by neutron activation analysis and inductively coupled plasma mass spectrometry

Four algae reference materials, IAEA-391, 392, 393 and IAEA-140, prepared by the International Atomic Energy Agency for intercomparison under different preparation conditions were analyzed for 24 elements. Conventional neutron activation analysis (NAA) was used to determine Al, Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Sb, V and Zn and epithermal NAA using BN and Cd as shielding material for I, Br, As, Ni, Mo and Cd. Inductively coupled plasma mass spectrometry (ICP-MS) as a complementary and comparative method was applied to determine Pb, Sn, Ni, Sr, Rb, As, Co, Cr, Cu, Mn, V, Mo and Zn. Two analytical quality control standard reference materials IAEA-V-10 (hay powder) and IAEA-331 (spinach) were analyzed simultaneously with real samples. The results agree quite well with each other and with the certified values.     

Simultaneous multi-element analysis of trace elements in soil samples by means of high-resolution inductively coupled plasma sector field mass spectrometry (SF-ICP-MS)

The potential of SF-ICP-MS for trace element analysis in complex environmental matrices such as soil solutions was investigated. Spectral interferences found in mass spectra of soil matrices are presented in detail. Furthermore, the influences of single components of the soil matrix on the signal intensity of selected elements were studied. Detection limits of different elements are presented with respect to the composition of the matrix. A fast and accurate method for quasi-simultaneous determination of Al, Si, P, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, As, Se, Sr, Mo, Cd, Sn, Hg and Pb in aqueous soil extracts was established. Received: 3 January 2000 / Revised: 28 March 2000 / Accepted: 31 March 2000     

Chemical effect on total mass attenuation coefficients of V, Cr, Mn, Co and Ni

Detailed interpretation of data obtained from X-ray transmission measurements usually depends on the assumption that the contribution of each element is additive. This assumption yields the mixture rule for X-ray attenuation coefficients which is valid if molecular and chemical effects are negligible. We measured the total mass attenuation coefficients of V, Cr, Mn, Co and Ni in various their compounds. Absorption corrections were carried on data for ligands in the compounds. We found that V, Cr, Mn, Co and Ni have different total mass attenuation coefficients in the different compounds. We compared our results with theoretical values of Hubbell and Seltzer.     

Pure graphite as a reference material for the determination of trace elements — an interlaboratory collaborative study

Seven synthetic graphite powders of different grade of purity were analyzed by means of INAA, WDXRF, EDXRF, DC-OES directly and using ICP-MS, ICP-OES, ETAAS and FAAS in combination with various sample preparation techniques. On the basis of a statistical evaluation of the results obtained, for the trace elements Al, Ca, Cr, Cu, Fe, Mn and Ni, reference values were established and, for the elements As, Co, Mg, Mo, Pb, Sb, Si, Sr, Ti, V, Zn and Zr, informative values are given. The analyzed reference materials are commercially available.