Oxidation reactions of the phosphinidene oxide ligand

The (H-DBU)+ salt of the anionic phosphinidene oxide complex [MoCp(CO)2{P(O)R*}]- (1) (DBU = 1,8-diazabicyclo[5.4.0]undec-7-ene; R* = 2,4,6-C6H2tBu3) reacts with different oxidizing agents, displaying a multisite activity located at the Mo and P atoms or at the Mo=P bond. Thus, reaction of 1 with [FeCp2]BF4 gives the dimer [Mo2Cp2(CO)4{P(O)R*}2], and reaction with bromine gives the phosphinous acid complex [MoBrCp{P(OH)(CH2CMe2C6H2tBu2}(CO)2], the latter arising from an unprecedented C-H bond addition to the oxide P=O moiety. In contrast, reaction of 1 with p-benzoquinone occurs at the P site to give the P,O-bound phosphonite complex [MoCp{kappa2-OP(OC6H4OH)R*}(CO)2]. Finally, oxygen or sulfur atoms are added to the Mo=P bond by reaction of 1 with Me2CO2 and S8 to give the novel dioxophosphorane or thiooxophosphorane complexes [MoCp(CO)2{kappa2-EP(O)R*}]- (E = O, S). The thiooxophosphorane anion is a good nucleophile and is methylated at either the S or O positions depending on the electrophile used (MeI or (Me3O)BF4) to give the isomers [MoCp{kappa2-(MeS)P(O)R*}(CO)2] and [MoCp{kappa2-SP(OMe)R*}(CO)2], both having novel organophosphorus ligands.     

Chemistry of heterometallic phenyl imido and phosphinidene clusters

Triruthenium imido cluster Ru₃(CO)₁₀(₃-NPh)⁽¹⁾ reacts with tungsten hydride LW(CO)₃H to afford heterometallic imido clusters LWRu₂(CO)₈(-H) (₃-NPh), L=Cp, (IIa); L=Cp*, (IIb), whereas the respective phosphinidene complexes LWRu₂(CO)₈(-H)(₃-PPh), L=Cp, (IXa); L=Cp*, (IXb), were generated via reaction of Ru₃(CO)₁₀(-H)(-PPh₂) with CpW(CO)₃H and with CP*W(CO)₃H followed by thermolysis in the presence of carbon monoxide. Their molecular structure, solution dynamics, and the subsequent reaction with hexafluoro-2-butyne are presented.     

Mixed nitrosyl/phosphinidene and nitrene/phosphinidene clusters of ruthenium

Reaction of the aminophosphinidene complex [Ru5(CO)15(mu 4-PNPri2)] 1 with [PPN][NO2] (PPN = Ph3P=N=PPh3) led to the mixed nitrosyl/phosphinidene cluster complex [PPN][Ru5(CO)13(mu-NO)(mu 4-PNPri2)] 2 which is transformed into the novel nitrene/phosphinidene cluster [Ru5(CO)10(mu-CO)2(mu 3-CO)(mu 4-NH)(mu 3-PNPri2)] 3 via treatment with triflic acid.     

Chemistry of trimethylene oxide

Summary The cis and trans modifications of 7-oxabicyclo[4.2.0]octane were prepared. The structures of both isomers were proved on the basis of infrared spectrum investigations and of derivatives obtained as a result of ring opening under the action of p-toluenesulfonic acid.     

Carbene- and carbyne-like behavior of the Mo-P multiple bond in a dimolybdenum complex inducing trigonal-pyramidal coordination of a phosphinidene ligand

The phosphinidene complex [Mo2Cp(micro-kappa1:kappa1,eta5-PC5H4)(CO)2(eta6-R*H)] (2; Cp = eta5-C5H5; R* = 2,4,6-C6H2tBu3) has substantially different Mo-P bonds and displays a high reactivity located at the short Mo-P bond. Sideways cycloaddition or addition processes are observed toward RCCR, HCl, and [Fe2(CO)9], to give respectively metallacyclobutene and arylphosphide-bridged and heterometallic phosphinidene-bridged derivatives, a behavior reminiscent of the nucleophilic mononuclear phosphinidene complexes (carbene-like behavior), which is in good agreement with the ground-state electronic structure of 2 derived from density functional theory calculations. However, the reaction of 2 with [Co2(CO)8] implies the addition of two cobalt fragments to its short Mo-P bond and thus reveals a carbyne-like behavior of compound 2. In most of the new products, the P atom displays an unprecedented trigonal-pyramidal-like environment, instead of the expected tetrahedral distribution of bonds.     

Computational study on the donor-adducts of phosphinidene complexes

The bonding of adducts between electron donors (D), such as NH₃ and PH₃, with phosphinidenes RP: (R = H, CH₃, NH₂, PH₂, PF₂) was examined using density functional theory calculations. The structures were optimized at the B3LYP/6-311++G⁷ level of theory. The main interest of this work is to find the appropriate donor that can stabilize the phosphinidene. Accordingly, the magnitude of bond strength correlates well with the difference in ionization potential (ΔIP) of the orbitals involved in the D?P interaction.     

Terminal phosphinidene formation via tantalaziridine complexes

Terminal, 4-coordinate phosphinidenes of Ta supported by bulky anilide ligands are prepared by an apparent reaction sequence involving metallaziridine phosphanide complexes.     

Monomeric phosphido and phosphinidene complexes of nickel

An unusual family of three-coordinate, d(8) and d(9) nickel phosphido and phosphinidene complexes containing the chelating 1,2-bis(di-tert-butylphosphino)ethane (dtbpe) ligand and a terminal PR(2)(-) or PR(2-) ligand have been prepared. The complexes (dtbpe)Ni[P(t-Bu)(2)] (2), [(dtbpe)Ni[=P(t-Bu)(2)](+)][PF(6)(-)] (3), [(dtbpe)Ni[=P(H)(dmp)](+)][PF(6)(-)] (5), and (dtbpe)Ni[=P(dmp)] (6) have been structurally characterized by single-crystal X-ray diffraction methods. The three-coordinate d(8) complexes exhibit Ni-P bond lengths and ligand geometries that indicate they participate in symmetry-allowed ligand-to-metal pi bonding involving phosphorus p-electrons and a metal-orbital of pi symmetry that lies in the Ni coordination plane. Compound 6 is a rare example of a late-transition-metal terminal phosphinidene complex.     

Bidentate phosphorus baskets by intramolecular phosphinidene addition

Intramolecular phosphinidene addition to the C==C bond of Mo-complexed, seven-membered phosphorus heterocycles affords three novel [(diphos)Mo(CO)(4)] complexes (18-20). The three bidentate phosphorus baskets differ in the composition of the seven-membered ring: one of the phosphorus atoms is flanked by CH(2), NCH(3), or O. The unsaturated tetrahydrophosphepine precursors are synthesized by either ring-closing metathesis (C and N derivatives) or by a cyclization sequence (O derivative). The crystal structures of the nitrogen- (19) and oxygen-containing (20) baskets have relatively small P-Mo-P angles of 76.240(13) degrees and 77.626(12) degrees , respectively, and complex 20 has slightly shortened Mo--P bond lengths.     

Reaction of a complexed phosphinidene with 2,4,6-tri-tert-butyl-1,3,5-triphosphabenzene

The terminal phosphinidene complex PhPW(CO)5 reacts with 2,4,6-tri-tert-butyl-1,3,5-triphosphabenzene to give two unexpected multicyclic organophosphorus compounds. One of them results from an initial 1,2-addition, followed by an intramolecular rearrangement. B3LYP/6-31G* calculations on simplified parent systems suggest that the reaction follows a unique concerted reaction pathway. The second, and major, product is a tetraphosphaquadricyclane derivative, which presumably results from an intramolecular [2+2] cycloaddition of an intermediate tetraphosphanorbornadiene complex. Single-crystal X-ray structures are presented for both products.     

Phosphepines: convenient access to phosphinidene complexes

Reaction of o-diethynylbenzene with transition metal-complexed primary phosphines gives in a single base-induced step stable phosphepine complexes as confirmed by X-ray data. At 75-80 degrees C these phosphepines undergo clean cheletropic elimination of naphthalene to give transient carbene-like phosphinidene complexes that can be trapped in high yield by alkenes, alkynes, and alcohols.     

3H-benzophosphepine complexes: versatile phosphinidene precursors

The synthesis of a variety of benzophosphepine complexes [R = Ph, t-Bu, Me; ML(n )()= W(CO)(5), Mo(CO)(5), Cr(CO)(5), Mn(CO)(2)Cp] by two successive hydrophosphinations of 1,2-diethynylbenzene is discussed in detail. The first hydrophosphination step proceeds at ambient temperature without additional promoters, and subsequent addition of base allows full conversion to benzophosphepines. Novel benzeno-1,4-diphosphinanes were isolated as side products. The benzophosphepine complexes themselves serve as convenient phosphinidene precursors at elevated, substituent-dependent temperatures (>55 degrees C). Kinetic and computational analyses support the proposal that the phosphepine-phosphanorcaradiene isomerization is the rate-determining step. In the absence of substrate, addition of the transient phosphinidene to another benzophosphepine molecule is observed, and addition to 1,2-diethynylbenzene furnishes a delicate bidentate diphosphirene complex.     

Assembly of coordination nanostructures via ligand derivatization of oxide surfaces

A scheme is presented for the construction of coordination nanostructures on oxide surfaces (glass, Si/SiO2, quartz), based on application of epoxy-terminated monolayers as anchors for covalent grafting of ligands. Two ligands bearing amine groups were reacted with epoxysilane monolayers on oxide surfaces, providing ligand-terminated substrates. The ligands employed were (i) a pyridine moiety, used for subsequent binding of cobalt tetraphenylporphine (CoTPP), and (ii) deferoxamine (DFX), which contains hydroxamic acid moieties, used for subsequent construction of various Zr4+-based coordination layers. The results suggest that a dense ligand layer was obtained in both cases, allowing the formation of coordination overlayers on the oxide surfaces. The growth of coordinated layers was similar to analogous overlayers assembled on Au substrates, indicating that high ligand coverage is achieved by the epoxy-amine surface reaction. Epoxy-based functionalization of oxide substrates is a mild and efficient method for preparing high-quality coordination overlayers. Moreover, the method makes use of commercially available silane and amine reactants, providing the basis for wide application.     

Reactivity of electrophilic terminal phosphinidene complexes toward phosphorus ylides

Stabilised phosphorus ylides react with transient terminal phosphinidene complexes [RP---W(CO)₅] (R=Ph, Me) to give products resulting from a formal insertion of P into a C---H bond via an initial nucleophilic attack of the ylidic carbon.     

Metal-template-directed synthesis of diphosphorus compounds through intramolecular phosphinidene additions

Heating the nonchelating cis-bis-7-phosphanorbornadiene-[Mo(CO)4] complex (13) results in the thermal decomposition of one of the 7-phosphanorbornadiene groups. The phosphinidene thus generated adds intramolecularly to a C=C bond of the other ligand to give the novel diphosphorus complex 14. This reaction constitutes a metal-template-directed synthesis. Likewise, the intramolecular phosphinidene addition to the C=C bond of a Mo-phospholene ligand affords the diphos complex 18. Its crystal structure exhibits an extremely small P-Mo-P bite-angle for a five-membered chelate ring. The similar intramolecular 1,2-addition to a C=C bond of a phosphole ligand gives a highly strained, unstable intermediate product. Scission of its P-Mo bond generates a free coordination site, which is then occupied by either CO or a phosphole to yield complexes 22 and 23, respectively. The analogous intermolecular addition of [PhPW(CO)5] to a [phosphole-W(CO)5] complex gives the di-[W(CO)5] complexed adduct 28. The directing effect of the metal on the intra- and intermolecular additions is discussed.     

Role of ligand to control the mechanism of nitric oxide reduction of copper(II) complexes and ligand nitrosation

The nitric oxide reactivity of two copper(II) complexes, 1 and 2 with ligands L(1) and L(2), respectively, [L(1) = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane, L(2) = 5,5,7-trimethyl-[1,4]-diazepane] have been studied. The copper(II) center in complex 1 was found to be unreactive toward nitric oxide in pure acetonitrile; however, it displayed reduction in methanol solvent in presence of base. The copper(II) center in 2, in acetonitrile solvent, on exposure to nitric oxide has been found to be reduced to copper(I). The same reduction was observed in methanol, also, in case of complex 2. In case of complex 1, presumably, the attack of nitric oxide on the deprotonated amine is the first step, followed by electron transfer to the copper(II) center to afford the reduction. Alternatively, first NO coordination to the Cu(II) followed by NO(+) migration to the secondary amine is the most probable in case of complex 2. The observation of the transient intermediate in UV-visible and FT-IR spectroscopy prior to reduction in case of complex 2 also supports this possibility. In both cases, the reduction resulted into N-nitrosation; in 1, only mononitrosation was observed whereas complex 2 afforded dinitrosation as major product along with a minor amount of mononitrosation. Thus, it is evident from the present study that the macrocyclic ligands prefer the deprotonation pathway leading to mononitrosation; whereas nonmacrocyclic ones prefer the [Cu(II)-NO] intermediate pathway resulting into nitrosation at all the available sites of the ligand as major product.     

Synthesis and coordination properties of new preorganized ligand on the triphenylphosphine oxide platform

Tris(2-cyanomethoxyphenyl)phosphine oxide was synthesized by the reaction of tris-(2-hydroxyphenyl)phosphine oxide with chloroacetonitrile. Its coordination properties were studied for the complexation with neodymium(iii) and copper(ii) nitrates using vibrational spectroscopy, NMR, and quantum chemical calculations.     

Electrochemical approaches to generation of phosphinidene complexes of tungsten pentacarbonyl

An alternative approach to synthesis of electrophilic terminal phosphinidene complexes of tungsten pentacarbonyl with various substituents at the phosphorus atom has been developed. The approach is based on the reaction of the electrochemically generated tungsten pentacarbonyl ion with trivalent phosphorus acyl chlorides. Electrochemical reduction of ethyldichlorophosphines in the presence of α-diimines is a one-step process that forms 1,3,2-diazaphospholenes containing an exocyclic P-C bond.     

Palladium-catalyzed Suzuki couplings using a novel diaminophosphine oxide as ligand

A novel diaminophosphine oxide was synthesized and applied as ligand in palladium-catalyzed Suzuki couplings reaction of aryl bromides and chlorides.The coupling reaction proceeded smoothly at mild conditions using 2 mol%Pd₂（dba）₃ in the presence of BuOK.