Effects of mercaptides on anionic polymerization. III. Polymerization of methyl methacrylate by thiophenoxides in polar aprotic solvents

Sodium thiophenoxide initiated the polymerization of methyl methacrylate in polar aprotic solvents (DMF, DMSO, HMPA). The active species that initiated the polymerization of the monomer was found by spectrophotometric measurements and by the sodium fusion method to be sodium thiophenoxide itself. The activation energy for the polymerization of the monomer in DMF solvent obtained was E = 3.4 kcal/mole below 30°C, and E = ?3.3 kcal/mole above the temperature. The phenomena were reasoned as the result of the formation of two active species: a solvent-separated ion pair and a contact ion pair. The effects of counterions on the reactivity of thiophenoxide increased with increasing electropositivity of the metals: Li < Na < K. Sodium phenoxide, the oxygen analog of thiophenoxide, was also found to initiate the polymerization of the monomer in the solvents. The relative reactivity of thiophenoxide to phenoxide for the monomer in HMPA at 30°C was thus determined: phenyl-SNa > phenyl-ONa. The relative effect of the polar aprotic solvents on the reactivity of thiophenoxide was also as follows: HMPA > DMF > DMSO. The kinetic studies were made by the graphical evaluation of rate constants. The following results were obtained for the monomer at 20°C in DMF solvent: K_p = 3.5 × 10² 1./mole-hr and K_t = 9.8 × 10^?2/hr.     

A differential scanning calorimeter study of the crystal forms and polymerization kinetics of 2,4-hexadiynyl-1,6-bis(p-toluenesulfonate)

The thermal properties of 2,4-hexadiynyl-1,6-bis(p-toluenesulfonate) have been explored by program temperature and isothermal differential calorimetry. The heat of fusion for the rapidly heated pure solid was 8254 cal/mole (34,540 J/mole) at 367.1°K (93.8°C). This amounts to an entropy change of 22.5 cal/mole °K (94.1 J/mole °K). The energy of activation for the thermal polymerizations was 18.97 kcal/mole (79.37 kJ/mole). The thermal polymerization appears to follow a solid–solid phase transition which proceeds by random homogeneous nucleation throughout the process. The kinetics were simple first order over 70% of the reaction. Programmed temperature studies indicate that during the first 10% of the polymerization a new high temperature (mp 375.4°K) solid phase is formed which acts as the monomer form during the bulk of the reaction.     

Equilibrium anionic polymerization of β-methoxypropionaldehyde

Anionic polymerization of β-methoxypropionaldehyde (MPA) was carried out in tetrahydrofuran (THF) by using benzophenone–monolithium complex as an initiator. An equilibrium between polymerization and depolymerization was observed at a temperature range of ?90 to ?70°C. From the temperature dependence of the equilibrium monomer concentration, thermodynamic parameters for the polymerization of MPA in THF were evaluated as follows: ΔH_ss = ?4.8 ± 0.2 kcal/mole, ΔH_SS = ?22.4 ± 1.3 cal/mole-deg, and (T_c)_ss = ?59°C. The thermodynamic change upon the conversion of liquid monomer to condensed polymer was computed from both the partial mixing energy of MPA with THF and the linear relationship between the equilibrium volume fraction of MPA monomer and that of the resulting polymer: ΔH_1c = ?4.7 ± 0.2 kcal/mole, ΔS_1c = ?19.5 ± 1.3 cal/mole-deg, and (T_c)_1c = ?35°C.     

Radiation-induced polymerization of 1,1,2-trichlorobutadiene

The γ-ray-induced polymerization of 1,1,2-trichlorobutadiene, m.p. ?48.5°C., was investigated in the temperature range from +55 to ?196°C. In the liquid state, the following results were obtained: (1) the rate decreases with decrease of temperature (E_a = 8.0 kcal./mole); (2) the dose rate dependences of rate and of molecular weight are 0.49 and ?0.25, respectively; (3) the reaction is inhibited by DPPH; (4) the structure of the polymer is predominantly 1,4 units. It was concluded that the liquid-state polymerization proceeds by a radical mechanism, and the radical yield was found to be 19.7. In the solid state, the following results were obtained: (1) the rate is considerably higher than in the liquid state immediately above the melting point and gradually decreases with decrease of temperature (E_a = 0.34 kcal./mole); (2) the dependence of the rate on dose rate is unity while the molecular weight is independent of the dose rate; (3) the reaction rate is unaffected by DPPH and accelerated by dimethylformamide; (4) the structure of the polymer, 3,4 units, is completely different from that of the polymer obtained in the liquid-state polymerization. The solid-state polymerization is probably of a different nature and is not well elucidated.     

Radiation-induced ionic polymerization of isobutyl vinyl ether in bulk

The radiation-induced ionic polymerization of isobutyl vinyl ether was investigated under conditions where the monomer was dried with molecular sieves. The investigation covered the temperature range from ?16°C to 90°C, and the dose-rate range from 10¹⁵ to 10²⁰ eV/g-sec, using both γ-rays and electrons. A very high overall activation energy of 15.9 kcal/mole was found for the process below 30°C. Above 30°C, however, the value of the overall activation energy dropped to 4.9 kcal/mole, a phenomenon which is ascribed to the solvation of the propagating carbonium ion below 30°C. The dose-rate dependence of the rate of polymerization was found to be 0.58 over the entire dose-rate range investigated. The molecular weight of the polymer was found to be far less sensitive to trace amounts of water than the rate of polymerization. The molecular weight of the polymer depended strongly on the irradiation temperature, reaching a maximum value of about 120,000 at 35°C. It is shown that at temperatures above 20°C regenerative chain transfer processes play an important role in determining the molecular weight of the polymer.     

p-Chlorophenyldiazonium hexafluorophosphate as a catalyst in the polymerization of tetrahydrofuran and other cyclic ethers

p-Chlorophenyldiazonium hexafluorophosphate is shown to be a convenient and effective catalyst for initiating the polymerization of tetrahydrofuran (TH) and other cyclic ethers. The polymerizations apparently proceed without any significant termination or transfer reactions (i.e., “living” polymers result), and materials of very high molecular weight can be obtained. A mobile monomer-polymer equilibrium for THF was obtained during polymerization and equilibrium conversions were determined at a number of temperatures. The ceiling temperature derived from these data was 84°C., the heat of polymerization was ?4.58 kcal./mole and the corresponding entropy change was ? 17.7 cal./°C.-mole. Hydrocarbons are suitable inert solvents for these polymerizations, but concentrated solutions must be used at ambient temperatures in order to stay above the required equilibrium monomer conceiitration and also to dissolve the catalyst which is insoluble in hydrocarbons. It was shown that acyclic ethers act as transfer agents in these polymerizations and that transfer with consequent reduction of molecular weight continues even after monomer-polymer equilibrium is reached. Cyclic ethers do not act as transfer agents but only copolymerize. Trimethyl orthoformate was shown to be a particularly effective transfer agent; it resulted in a polymer with methoxy endgroups and produced methyl formate as a by-product. The data obtained are consistent with a mechanism involving initiation by hydrogen abstraction and polymerization via tertiary oxonium ions associated with PF^?₆ gegenions. This gegenion is thought to be responsible for the “living” nature of the system.     

Polymerization of styrene with the VOCL3–AlEt2Br catalyst system

The rate of polymerization with the VOCl₃–AlEt₂Br catalyst system at 30°C. in n-hexane reached a maximum at an Al/V molar ratio of 1.5. At this ratio, the rate of polymerization was first-order with respect to catalyst and second-order with respect to monomer concentrations. The apparent activation energy calculated was 6.4 kcal./mole. Diethylzine was found to act as a chain transfer agent. However, the molecular weights of polymers obtained were low. The possibility of bromide-containing catalyst sites acting in the termination reaction has been investigated. The average valence of vanadium is discussed in relation to molecular weights.     

Equilibrium cyclotrimerization of ether oxygen-substituted aliphatic aldehydes

This article describes the equilibrium cyclotrimerization of β-methoxypropionaldehyde (MPA), 4,7-dioxaoctanal (DOA), and n-octanal (OA) initiated by boron trifluoride etherate in toluene at a temperature range of ?10 to 25°C. The enthalpy and entropy changes corresponding to the conversion of 1 mole of the monomers to 1/3 mole of their cyclic trimers in toluene solution, at the initial monomer concentration of 1 mole/liter, were evaluated as follows: ΔH_ss = ?5.9 ± 0.3 kcal/mole and ΔS_ss = ?19.1 ± 1.3 cal/mole deg for the MPA system; ΔH_ss = ?7.4 ± 0.4 kcal/mole and ΔS_ss = ?24.1 ± 1.7 cal/mole deg for the DOA system; ΔH_ss = ?6.1 ± 0.4 kcal/mole and ΔS_ss = ?21.2 ± 1.5 cal/mole deg for the OA system. The comparison of these values with those in their polymerization indicates that the cyclotrimerization of aldehydes is thermodynamically of greater advantage than their polymerization. The effects of long and polar substituents are discussed from the view-point of the intermolecular interactions by the polar groups in monomers and their cyclic trimers.     

Equilibrium anionic polymerization of 4,7-dioxaoctanal and n-octanal

Equilibrium anionic polymerization of 4,7-dioxaoctanal (DOA) and n-octanal (OA) was carried out in tetrahydrofuran in the temperature range of ?90 to ?68°C, and thermodynamic parameters were evaluated as follows: ΔH_ss = ?4.0 ± 0.1 kcal/mole, ΔS_ss = ?18.4 ± 0.5 cal/mole-deg, and T_c,ss = ?56°C for the DOA system; ΔH_sc = ?3.4 ± 0.1 kcal/mole, ΔS_sc = ?15.7 ± 0.4 cal/mole-deg, and T_c,sc = ?59°C for the OA system. Comparison of these values with those in the cases of β-methoxypropionaldehyde and n-valeraldehyde made it clear that the aliphatic aldehyde having a longer alkyl group polymerizes with smaller changes of enthalpy and entropy and that the polar-substituted aldehydes have higher polymerizability than the corresponding unsubstituted aliphatic aldehydes in the temperature range studied. These effects of substituents are interpreted from the viewpoint of the intermolecular interactions of polar groups in monomers and their polymers.     

Radiation-induced polymerization of hexafluoropropylene at high temperature and pressure

The radiation-induced polymerization of hexafluoropropylene was studied in the pressure and temperature ranges of 4,500–15,000 atm. and 100–230°C., respectively. Retardation was a serious problem; data thought to apply to the unretarded polymerization are summarized below. At 1,500 rad/hr. the polymerization rate was 15%/hr. at 230°C. and 15,000 atm. The activation enthalpy and volume are 9.5 kcal./mole and ?10 cc./mole, respectively. The rate varies as the square root of the radiation intensity. The largest intrinsic viscosity of the polymer is 2.0 dl./g.; values increase with temperature and pressure. At 130°C. and 10,000 atm. the intrinsic viscosity was the same at two radiation intensities.     

Polymerization of Acrylonitrile Initiated by 1,4-Dimethyl-1,4-bis(p-nitrophenyl)-2-tetrazene

The polymerization of acrylonitrile (AN) initiated by 1,4-dimethyl-1,4-bis(p-nitrophenyl)-2-tetrazene (Ie) was studied in dimethylformamide (DMF) at high temperature. The polymerization proceeds by a radical mechanism. The rate of polymerization is proportional to [Ie]^0.64 and [AN]^1.36. The overall activation energy for the polymerization is 21.5 kcal/mole within the temperature range of 115-130°C. The chain transfer of Ie was also undertaken over the temperature range of 120-135°C. The activation parameters for the decomposition of Ie at 120°C are k_d = 2.78 × 10^?6 sec^?1, ΔH^? = 40.8 kcal/mole, and ΔS^? = 19.5 cal/mole-deg, respectively.     

Effect of metal salts on polymerization. Part I. Polymerization of vinylpyridine initiated with cupric acetate

The polymerization of vinylpyridine initiated by cupric acetate has been studied. The rate of polymerization was greatly affected by the nature of the solvent. In general polar solvents increased the rate of polymerization. Polymerization was particularly rapid in water, acetone, and methanol. The initial rate of polymerization of 4-vinylpyridine (4-VP) in a methanol–pyridine mixture at 50°C. is R_p = 6.95 × 10^?6[Cu¹¹]^1/2 [4-VP]² l./mole-sec. The activation energy of initiation by cupric acetate is 5.4 ± 1.6 kcal./mole. Polymerization of 2-vinylpyridine and 2-methyl-5-vinylpyridine with the same initiator was much slower than that of 4-VP. Dependence of R_p on monomer structure and solvent is discussed. Kinetic and spectroscopic studies led to the conclusion that the polymerization of 4-VP is initiated by one electron transfer from the monomer to cupric acetate in a complex having the structure, (4-VP)₂Cu(CH₃COO)₂.     

Equilibrium concentration of trioxane in cationic polymerization

In the cationic polymerization of trioxane and tetraoxane near room temperature, the equilibrium trioxane concentration is not negligible during polymerization. In this work, tetraoxane was polymerized with BF₃ ? O(C₂H₅)₂ in various solvents and the equilibrium concentration of trioxane produced during the polymerization of tetraoxane and equilibrated with the growing polyoxymethylene chain was determined. The equilibrium trioxane concentrations were 0.05, 0.13, and 0.19 mole/l. in benzene, ethylene dichloride, and nitrobenzene at 30°C, respectively, and 0.20 mole/l. in thhylene dichloride at 50°C. The values in ethylene dichloride showed that the approximate values of ΔH_p and ΔS were ?4.2 kcal/mole and ?9.7 cal/mole-deg., respectively.     

Vinyl polymerization. Part 268. Polymerization of acrylonitrile initiated by the system of tetramethyl tetrazene and bromoacetic acid

The polymerization of acrylonitrile (AN) initiated by the system of tetramethyl tetrazene (TMT) and bromoacetic acid (BA) in dimethylformamide (DMF) was studied. The TMT–BA system could initiate the polymerization of AN more easily than TMT alone. The polymerization was confirmed to proceed through a radical mechanism. The initial rate of polymerization R_p was expressed by the equation: R_p = [TMT]^0.62-[BA]^0.5[AN]^1.5. The overall activation energy for the polymerization was estimated as 9.4 kcal/mole. In the absence of monomer, the reaction of TMT with BA in DMF was also studied kinetically by measuring the evolution of nitrogen gas. The reaction was first-order in TMT and first-order in BA; the rate data at 49°C were k₂ = 9.1 × 10^?2l./mole-sec., ΔH? = 17.0 kcal/mole, and ΔS? = ? 6.6 eu. In addition, the treatment of TMT with BA in benzene led to the formation of tetramethylhydrazine radical cation, which was identified by its ESR spectrum. On the other hand, the relatively strong interaction between TMT and DMF was observed by absorption spectrophotometry.     

Aqueous polymerization of methacrylamide

The aqueous polymerization of methacrylamide (I) initiated by KBrO₃–thioglycolic acid (TGA) has been studied at 30 ± 0.2°C in nitrogen. The rate is given by K[M]^1.19 [thioglycolic acid]¹ [KBrO₃]^0.53 for 10–15% conversion. Activation energy was found to be 53.96 kJ/mole (12.92 kcal/mole) in the investigated range of temperature 30–45°C. The role of addition of a series of aliphatic alcohols and some salts was also determined. The kinetics of polymerization was followed iodometrically.     

Reactivity ratios of styrene and methyl methacrylate at 90°C

From the conversion–composition data of Gruber and Elias, the reactivity ratios of styrene (M₁) and methyl methacrylate (M₂) were calculated to be r₁ = 0.55 ± 0.02 and r₂ = 0.58 ± 0.06 at 90°C. The least-squares method was then used on these and literature values at other temperatures to obtain the Arrhenius expressions: In r₁ = 0.04736 – (235.45/T), and ln r₂ = 0.1183 – (285.36/T). Using literature values for the homopolymerization steps, A₁₁ = 2.2 × 10⁷l./mole-sec., E₁₁ = 7.8 kcal./mole, and A₂₂ = 0.51 × 10⁷ l./mole-sec.^?1, E₂₂ = 6.3 kcal./mole, activation energies and frequency factors were then calculated for the cross-polymerization steps: A₁₂ = 2.1 × 10⁷ l./mole-sec., E₁₂ = 7.3 kcal./mole, and A₂₁ = 0.45 × 10⁷ l./mole-sec., E₂₁ = 5.7 kcal./mole.     

Cyclopolymerization of isoprene with VCl4–AlEt2Br catalyst system

Isoprene was polymerized at 30°C with VCl₄–AlEt₂Br catalyst system in n-hexane. A linear dependence of rate of polymerization on the monomer and catalyst concentrations was found. The overall activation energy was 8.96 kcal/mole. Infrared spectra of polyisoprene showed the presence of cyclic structure, indicating a cationic mechanism of polymerization.     

Aqueous polymerization of acrylamide

The polymerization of acrylamide (I) initiated by a potassium bromate—thioglycollic acid (TGA) redox pair has been studied in aqueous media at 30°C in a nitrogen atmosphere. The reaction order related to the catalyst concentration (KBrO₃) was 0.501, which indicated a bimolecular mechanism for the termination reaction in the range of 1.0?3.0 × 10^?3 mole/liter. The polymerization rate varied linearly with monomer (I) concentration over the range of 1.0?5.0 × 10^?2 mole/liter. A typical behavior is observed, however, by changing the thioglycollic acid concentration. The initial rate of polymerization (Ri), as well as the maximum conversion, increases by increasing the temperature to 30°C, but the initial rate and the maximum conversion falls as the temperature rises above 30°C. The overall energy of activation is 6.218 kcal in the temperature range of 20–40°C. Water-miscible organic solvents, namely, CH₃OH and C₂H₅OH, depress the rate of polymerization.     

Effect of Rh(III) and Ru(II) complexes in the polymerization of vinyl monomers initiated by charge transfer mechanism

The initiation of polymerization of vinyl monomers such as methyl methacrylate (MMA) and methyl acrylate (MA) by a charge transfer complex formed between n-butylamine(nBA) and carbon tetrachloride (CCl₄) in dimethylsulfoxide (DMSO) at 30°C is slow. The effect of the dimethylsulfoxide complexes of Rh(III) and Ru(II) on the polymerization of MMA and MA in the presence of nBA, and CCl₄ in DMSO has been studied. The rate of polymerization and percent conversion of the MMA and MA at 30°C are evaluated at the critical concentration of the metal complexes. At the critical range of the metal complex concentrations, both R_p, and percent conversion of MMA and MA were found to be highest. However, above and below the critical concentrations, R_p and percent conversion of the monomers were found to decrease. A suitable mechanism for the polymerization has been proposed.     

Radiation-induced postpolymerization of trioxane in the solid state. II. Kinetic study of radiation-induced postpolymerization of trioxane in dry and high-vacuum system

A kinetic study of the radiation-induced postpolymerization of trioxane in the solid state has been made. Trioxane was purified by sublimation through Ag₂O and Na–K alloy in vacuo and was both irradiated and polymerized in a super-dry system under high vacuum. In the present study it was found that the initial rate of polymerization is larger than that reported previously. It is reasonably suggested that the postpolymerization of trioxane consists of two stages, i.e., a very large rate at the first stage and a relatively small one at the second stage. By using the kinetic scheme proposed previously kinetic parameters at the second stage were determined. It was found that trioxane can be postpolymerized even at a temperature below 30°C with good reproducibility and that the overall activation energy of the polymerization was less than 15 kcal/mole. No chain-transfer reaction seems to occur except at low temperatures. These results have been discussed in comparison with data reported previously.