Reversed phase partition chromatographic separation of divalent copper with N-n-octylaniline on silica gel

A novel separation method was developed for the extraction and chromatographic separation of copper(II). The quantative extraction of 25.0–125.0 μg copper(II) has been observed from 0.05 to 0.25 mol/L of ascorbic acid at pH 9.0–12.0 with 0.087 mol/L N-n-octylaniline (liquid anion exchanger) coated on silica gel at a flow rate of 1.0 ml/min. The extracted metal ion has been recovered by eluting with 25.0 ml of 1.0 mol/L hydrochloric acid and determined spectrophotometrically by rubeanic acid method. The various influencing parameters viz. acid concentrations, reagent concentration, eluates effect of pH, and effect of flow rate on extraction were studied. The method is free from large number of interferences from cations and anions. A scheme for mutual separation of copper(II), gold(III) and bismuth(III) has been developed. Copper(II) has been separated from ayurvedic (Herbal) medicine and synthetic mixtures corresponding to alloy. The log–log plot of N-n-octylaniline concentration versus the distribution coefficient indicates that the probable extracted species is [.     

Determination of palladium, platinum and gold by first derivative spectrophotometry

Summary The application of first-derivative spectrometry to the simultaneous determination of palladium(II), platinum(IV) and gold(III) is described. Light absorption of stable chlorocomplexes formed in 1 mol/l hydrochloric acid provides the basis of their determinations. A difference in the derivative amplitudes between two first-derivative zero crossing points of one metal A is read, corrected for the contribution of metal B and used for quantitation of metal C. Palladium (0.48–20 g ml^–1), platinum (0.16–24 g ml^–1) and gold (0.32–24 g ml^–1) have been determined with good precision and accuracy without any separations. Results are also presented for the simultaneous determination of the three precious metals in the presence of several major constituents.     

Solvent extraction of thorium from nitric acid solutions using di-N-butyl sulfoxide (DBSO) in xylene

The extraction of thorium(IV) from nitric acid solutions by di-n-butyl sulfoxide (DBSO) in xylene has been investigated as a function of acid, extractant and the metal concentration. The effect of contact time and diverse ions on the extraction has been examined. Phosphate, fluoride, oxalate and perchlorate reduce the extraction to some extent. The extraction of other metal ions, especially impurities associated with thorium in ores, has been measured under optimised conditions selected for thorium extraction. Na(I), K(I), Ca(II), Sr(II), Mn(II), Fe(II), Ni(II), Zn(II), Pb(II), Al(III), Ti(IV) and Hf(IV) are not extracted. Among the stripping solutions employed for back-extraction, deionized water is found to be the best and more than 99% thorium can be back-extracted in three stages. The extracted species is supposed to be Th(NO₃)₄·2DBSO. The extraction is found to be almost independent of the thorium concentration in the range between 4.3·10^–4–4.3·10^–2M and inversely dependent upon the temperature. The values of thermodynamic functions H, G and S for extraction equilibrium have been evaluated to be –19.6±2.9 kJ·mole^–1, –18.1±2.0 kJ·mole^–1 and –5.0±2.9 J·mole^–1·K^–1, respectively.     

Propylene carbonate as a solvent for salting-out extraction and subsequent differential pulse polarography

Summary Selective and sensitive procedures are described for the direct differential pulse polarographic determination of antimony(III), indium(III) and cadmium(II) in propylene carbonate. This method was based on the salting-out extraction of their halide complexes into the solvent from acidic aqueous media. The extracted Sb(III), In(III) and Cd(II) complexes exhibit sharp differential pulse polarographic peaks at –0.21 V, –0.63 V and –0.72 V vs. SCE in salted-out propylene carbonate phases respectively. The lower limits of determination are 5.0g for Sb(III), 0.6g for In(III), and 0.2g for Cd(II) in 10 ml of the organic phase. A number of foreign ions are eliminated through both processes of solvent extraction and polarography using propylene carbonate.

---

Propylencarbonat als Lösungsmittel für die Fällungs-Extraktion und die nachfolgende Differential-Puls-Polarographie

Zusammenfassung Selektive und empfindliche Verfahren für die direkte Bestimmung von Sb(III), In(III) und Cd(II) in Propylencarbonat mit Hilfe der Differential-Puls-Polarographie wurden beschrieben. Die vorliegende Methode beruht auf der Fällungs-Extraktion der Halogenid-Komplexe aus wäßrig-saurem Medium in das Lösungsmittel. Die extrahierten Komplexe des Sb(III), In(III) und Cd(II) ergeben scharfe Peaks bei –0,21 V, –0,63 V und –0,72 V gegen die Kalomelelektrode in den betreffenden Propylencarbonat-Phasen. Die unteren Grenzen der Bestimmungen liegen bei 5,0g Sb, 0,6g In bzw. 0,2g Cd in 10 ml organischer Phase. Eine Anzahl Fremdionen wird durch die beiden Prozesse der Extraktion und der Polarographie in Propylencarbonat ausgeschaltet.

     

Rapid extraction of copper(II) with 2-thenoyltrifluoroacetone direct colorimetric determination in the organic phase

Summary The chelating agent, 2-thenoyltrifluoroacetone has been employed for rapid extraction and colorimetric determination of milligram amounts of copper(II) in one operation. At pH 2.4–6.0 copper(II) is extracted quantitatively from an aqueous solution by TTA-benzene in a single extraction. The green-coloured copper(II)-TTA chelate solution in benzene obeysBeer's law at 430 m over the range of 16–180g copper per millilitre. The coloured system is stable for 143 hours. It can tolerate silver, mercury(II), bismuth (<5 mg) and small amounts (<100 mg) of citrate and tartrate, whereas cobalt(II), nickel(II), iron(III), aluminium(III), cerium(IV), thorium and zirconium seriously interfere. The proposed method is reproducible to within ±1.4%.     

Sorption of hafnium on hydrous titanium oxide using radiotracer technique

The sorption of hafnium on hydrous titanium oxide (TiO₂·1.94 H₂O) has been studied in detail. Maximum sorption of hafnium can be achieved from a pH 7 buffer solution containing boric acid and sodium hydroxide using 50 mg of the oxide after 30 minutes shaking. The value ofk _d, the rate constant of intraparticle transport for hafnium sorption, from 0.01M hydrochloric and perchloric acid and pH 7 buffer solutions has been found to be 17 mmole·g^–1·min^–2. The kinetics of hafnium sorption follows Lagergren equation in 0.01M HCl solution only. The values of the overall rate constantK=6.33·10^–2 min^–1 and of the rate constant for sorptionk ₁=6.32·10^–2 min^–1 and desorptionk ₂=2.28·10^–5 min^–1 have been evaluated using linear regression analysis. The value of correlation factor() is 0.9824. The influence of hafnium concentration on its sorption has been examined from 4.55·10^–5 to 9.01·10^–4 M from pH 7 buffer solution. The sorption data followed only the Langmuir sorption isotherm. The saturation capacity of 9.52 mmole·g^–1 and of a constant related to sorption energy have been estimated to be 2917 dm³·mole^–1. Among all the additional anions and cations tested only citrate ions reduce the sorption significantly. Under optimal experimental conditions selected for hafnium sorption, As(III), Sn(V), Co(II), Se(IV) and Eu(III) have shown higher sorption whereas Mn(II), Ag(I) and Sc(III) are sorbed to a lesser extent. It can be concluded that a titanium oxide bed can be used for the preconcentration and removal of hafnium and other metal ions showing higher sorption from their very dilute solutions. The oxide can also be employed for the decontamination of radioactive liquid waste and for pollution abatement studies.     

Simultaneous determination of iron(III) and cobalt(II) withN-phenylcinnamohydroxamic acid and thiocyanate by extraction and spectrophotometry

Simple, precise, sensitive, and highly selective methods for the separate determination of iron(III) and cobalt(II) and for the simultaneous determination of both metal ions are described. Iron(III) and cobalt(II) react with thiocyanate in the presence ofN-phenylcinnamohydroxamic acid (PCHA) to form pinkish red and blue coloured complexes, respectively. Both the iron(III) and cobalt(II) complexes having stoichiometric composition of 122 (FeSCN^–PCHA) and 14 (CoSCN^–), respectively, are quantitatively extractable into ethylacetate from 0.5–1.5 M hydrochloric acid solutions. The spectra of iron(III) and cobalt(II) complexes in the visible region exhibit absorption maxima at 495 and 625 nm, respectively. The coloured systems obey Beer's law in the concentration range of 0.2–4.0g/ml of iron and 2–40g/ml of cobalt. The effects of foreign ions and of various experimental parameters were studied to establish the optimum conditions for the extraction and determination of iron and cobalt. The methods have been applied successfully to the analysis of blood, vitamin B₁₂, and standard steels for iron and cobalt.     

A selective and sensitive spot-test for gold

Summary A new spot test for gold has been developed, based on the oxidation of colourless phenolphthalin to red phenolphthalein in alkaline medium. The sensitivity is 0.2g of gold on a spot-plate and 0.15g on filter paper. Ce(IV) interferes seriously, and Pt(IV) at high concentrations, but Pd(II), Cu(II), Fe(III), Cr(III), Ni(II), UO₂(II), ClO₄ ^–, CrO₄ ^2–, BrO₃ ^–, IO₃ ^–, MoO₄ ^2–, and WO₄ ^2– do not.

---

Zusammenfassung Eine neue Tüpfelreaktion für Gold wurde entwickelt, die auf der Oxydation des farblosen Phenolphthalins zu rotem Phenolphthalein in alkalischem Milieu beruht. Die Empfindlichkeit beträgt auf der Tüpfelplatte 0,2g Gold, auf Filterpapier 0,15g. Cer(IV) stört stark, Pt(IV) in hoher Konzentration; hingegen stören Pd(II), Cu(II), Fe(III), Cr(III), Ni(II), UO₂(II), ClO₄ ^–, CrO₄ ^2–, BrO₃ ^–, JO₃ ^–, MoO₄ ^2– und WO₄ ^2– nicht.

     

Ion-exchange separation and spectrophotometric determination of traces of gold

Summary A combined ion-exchange — spectrophotometric method has been developed for the separation and determination of traces of Au(III) in seven metal ions: Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Se(IV) and Cd(II). Au(III) is adsorbed selectively on a DEAE column from dilute chloride solution, while other metal ions pass through the column. Au(III) is recovered by elution with 1M hydrochloric acid. Traces of Au(III) in the effluent are determined by a new spectrophotometric method, which is based on the formation and extraction of Au(III) — azide — methylene blue complex. Separations of traces of Au(III) from 1000-fold of Pd(II) and Pt(IV) and 10000-fold of Hg(II) are also effected on a DEAE column in mixed methanol 1M hydrochloric acid medium (8 2). While Pd(II), Pt(IV) and Hg(II) are retained on the column, Au(III) adsorbs very weakly, so that the separations can be accomplished easily.

---

Zusammenfassung Eine mit Ionenaustausch kombinierte spektrophotometrische Methode zur Trennung und Bestimmung von Goldspuren neben sieben verschiedenen Metallionen wurde ausgearbeitet, nämlich neben Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Se(IV) und Cd(II). Das Gold wird an einer Säule aus Diäthylaminoäthylzellulose (DEAE) aus verdünnter Chloridlösung adsorbiert, wobei die anderen Metalle die Säule passieren. Durch Elution mit 1-m Salzsäure wird das Gold wieder gewonnen. Goldspuren im Effluenten werden mit Azid und Methylenblau komplex gebunden und so spektrophotometriert. Von der 1000fachen Menge Pd(II) und Pt(IV) sowie der 100000fachen Menge Hg(II) können Goldspuren auch aus Methanol + 1-m Salzsäure (12) mit einer DEAE-Säule abgetrennt werden. Während Pd(II), Pt(IV) und Hg(II) an der Säule festgehalten werden, wird Au(III) nur sehr schwach adsorbiert, so daß die Trennung leicht gelingt.

     

Tris(2-ethylhexyl)phosphate as an extractant for quadrivalent tin,with subsequent determination with pyrocatechol violet in alloy samples

The solvent extraction of tin(IV) from chloride media withtris(2-ethylhexyl)phosphate is presented. Tin(IV) is extracted quantitatively from 2.75–3.20 mol dm^–3 hydrochloric acid using 6.38–6.91 mol dm^–3 tris(2-ethyl-hexyl)phosphate dissolved in toluene as an extractant. After back-extraction of tin(IV) with water from thetris(2-ethylhexyl)phosphate phase, it is estimated spectrophotometrically following complexation with pyrocatechol violet. The recommended range for determination of tin(IV) is 10–100 g. The probable extracted species is SnCl₄·2TEHP. The method is applicable to the analysis of alloy samples with a detection limit of 0.4 g/ml (for 10 g of tin) and a relative standard deviation between 0.21–0.32%.     

Atomic absorption spectroscopic determination of arsenic in antimony compounds using solvent extraction and arsine generation

Summary An arsine generation-atomic absorption spectroscopic method for the determination of 0.04–4000 p. p. m. of arsenic in antimony compounds is described. The interference from antimony and other elements is eliminated by solvent extraction with benzene. The sample is dissolved in concentrated hydrochloric acid and reduced with titanium(III) chloride. Arsenic(III) is extracted into benzene from 10–12N hydrochloric acid at which concentration no antimony (III) is extracted; arsenic(III) is then back-extracted into water. Arsine is generated with potassium iodide, tin(II) chloride and zinc powder from 2.4N hydrochloric acid solution, and introduced to a nitrogen-hydrogen flame. The method has been tested with various antimony samples.

---

Zusammenfassung Für die Bestimmung von 0,04–4000 ppm Arsen in Antimonverbindungen wurde ein Verfahren zur Arsinbildung und Atomarabsorption entwickelt. Die Störung durch Antimon und andere Elemente wurde durch Extraktion mit Benzol beseitigt. Die Probe wird in konz. Salzsäure gelöst und mit Titan(III)chlorid reduziert. Arsen(III) wird aus 10–12N Salzsäure mit Benzol extrahiert, ohne daß Antimon(III) mitextrahiert wird; As(III) wird dann in Wasser rückextrahiert. Mit Kaliumjodid, Zinn(II)chlorid und Zinkpulver wird aus 2,4N salzsaurer Lösung Arsin entwickelt und in eine Stickstoff-Wasserstoff-Flamme geleitet. Das Verfahren wurde mit verschiedenen Antimonproben getestet.

     

Kinetics and mechanism of distribution of Am(III) and Eu(III) between thenoyltrifluoroacetone-triphenylarsine oxide mixture in chloroform and aqueous nitrate medium

The kinetics of distribution of Am(III) and Eu(III) between thenoyltrifluoroacetone (HTTA) and triphenylarsine oxide (Ph₃AsO) mixture in chloroform and aqueous nitrate medium has been investigated using a stirred Lewis cell at ionic strength of 0.1M. The effect of the concentration of HTTA, Ph₃AsO, H⁺ and NO ₃ ^– on the rate of distribution of Am(III) and Eu(III) was studied. The results were interpreted by reaction mechanisms where the rate-determining steps are the parallel reactions of Am(OH)²⁺ or Eu(OH)²⁺ with one HTTA molecule and one Ph₃AsO molecule in the aqueous medium. The values at 25 °C of the rate constantk _HLL (HL=HTTA andL=Ph₃AsO) are 1.6±0.3·10⁶M^–2·s^–1 and 2.3±±0.3·10⁸M^–2·s^–1 for Am(III) and Eu(III), respectively.     

Flow Analysis of Transition Metals by Thermal Lensing

The conditions for the flow determination of Al(III), Bi(III), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Nd(III), Ni(II), Pb(II), Pr(III), and Zn(II) by reaction with Xylenol Orange in aqueous solutions at pH 4.5 and the determination of Cd(II), Co(II), Cu(II), Fe(II), Ni(II), Pb(II), and Zn(II) by reaction with 4-(2-thiazolylazo)resorcinol in water–ethanol mixtures (5 : 1) at pH 5.0 using an injected sample volume of 80 L were proposed. The limits of detection were n × 10^–8–n × 10^–7 mol/L; the linearity ranges in the calibration graphs were of about three orders of magnitude; the relative standard deviation was of 3–7%.     

Extraktionsmethode zur Trennung kleiner Tellurmengen von Begleitelementen

Zusammenfassung Zur Trennung von Tellur aus Lösungen mit komplizierter Zusammensetzung wurde eine kombinierte Extraktionsmethode entwickelt. Die Extraktion von Eisen(III), Arsen(V), Antimon(V), Gold(III), Thallium(III), Wismut(III), Zinn(IV) und Selen(IV) erfolgt mit Diisopropyläther aus 8 M Salzsäure, wobei das gesamte Te(IV) in der wäßrigen Phase verbleibt. Diese wird dann mit Methylisobutylketon aus 4 M Salzsäure extrahiert, während in der wäßrigen Phase Kupfer(II), Aluminium(III), Silber(I), Nickel (II), Kobalt(II), Zink(II), Cadmium(II) und Blei(II) verbleiben. Die vollständige Abtrennung der Begleitelemente des Tellurs erfolgt durch zusätzliche Extraktion ihrer Kupferronate mit Methylisobutylketon bei pH 3–5. Das vorgeschlagene Extraktionsverfahren kann mit jeder bekannten Methode zur Bestimmung geringer Tellurmengen kombiniert werden.

---

Extraction method for the separation of small quantities of tellurium from accompanying elements

A new combined solvent extraction method is proposed for the separation of tellurium from solutions of complex composition. Iron(III), arsenic(V), antimony(V), gold(III), thallium(III)J bismuth(III), tin(IV) and selenium(IV) are extracted with diisopropyl ether from 8 M hydrochloric acid. Under these conditions tellurium(IV) is quantitatively retained in the aqueous phase. Subsequently tellurium(IV) is extracted from 4 M hydrochloric acid with methylisobutyl ketone, so that copper(II), aluminium(III), silver(I), nickel(II), cobalt(II), zink(II), cadmium(II) and lead(II) remain in. the aqueous phase. The complete separation of the accompanying elements is realized by an additional extraction of their cupferronates with methylisobutyl ketone at pH 3–5. The separation described can be combined with any known method for the determination of small amounts of tellurium(IV).

     

Evaluation of unsymmetrical dithiodiglycolamide as novel extractant for application in selective separation of palladium(II) from aqueous solutions

A novel unsymmetrical multidentate ligand namely; N,N'-dimetyl-N,N'-didecyldithiodiglycolamide (DMD³TDGA) was synthesized and used as agent for the selective extraction of palladium(II) from hydrochloric acid solutions. A systematic investigation was carried out on the extraction of Pd(II) using DMD³TDGA. The quantitative extraction of Pd(II) with DMD³TDGA in n-dodecane is observed at ~4 M HCl. The main extracted species of Pd(II) is PdC_l2. DMD³TDGA and IR spectra of the extracted species were investigated. The extraction of palladium(II) from various concentrations of hydrochloric acid solutions in the presence of metal ions, such as Pt(IV), Rh(III), Cr(II), Ni(II), Fe(III), Nd(III), Zr(II), and Mn(II) was carried. DMD³TDGA showed very high selectivity and extractability for Pd(II). Quantitative back extraction of Pd(II) was obtained in single contact using thiourea solution. The results obtained indicated that, excellent separation of Pd(II) from the investigated metal ions can be achieved. Five successive cycles of extraction/back-extraction, indicating excellent stability and re-utilization of this new extractant can be used for selective separation of Pd(II) from other elements in hydrochloric acid medium.     

A highly selective and sensitive method for identification of gold

Summary A highly sensitive method for detection of gold, almost free from interferences, is described. The reaction is performed on a short column of anion-exchange resin Dowex 1 X8 (100–200 mesh) in iodide form. To the test solution containing 0.13g/ml of gold(III) is added Sb-solution (weight ratio Au: Sb=1 200) and the mixture is then passed through the resin, followed by 1N NaOH. A crimson colour appearing within 2–3 min indicate gold. Many metal ions, including Pt-metals, Tl(I), Tl(III), Ir(IV), In (III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) do not interfere. In the presence of 50-fold excess of Ag(I) or Bi(III) there is no colour because of the formation of a precipitate on the resin.

---

Zusammenfassung Ein hochempfindliches und selektives Verfahren zum qualitativen Gold-nachweis wurde vorgeschlagen. Die Reaktion wird in einer 10 mm hohen Anionenaustauschersäule Dowex 1 X8 in Jodidform durchgeführt. Zu der aufgetragenen Probelösung fügt man Sb(III) und (V) (im Verhältnis Au: Sb= 1 200) und versetzt nachher auf der Säule mit 1-n NaOH. Nach einigen Minuten entsteht um die Harzkörner eine himbeerrote Färbung. Pt-Metalle, Tl(I), Tl(III), Ir(IV), In(III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) stören nicht; Ag(I) und Bi(III) stören gleichfalls nicht, solange sie in nicht mehr als 50facher Menge neben Gold vorliegen. Bei höheren Konzentrationen setzen sie sich als unlösliche Jodide um die Harzkörner ab und stören. Die Nachweisgrenze der Reaktion liegt bei 0,13g/ml.

     

Extraction of gold(III), palladium(II), and platinum(IV) by 1-[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-ylmethyl]-1<Emphasis Type="Italic">H</Emphasis>-1,2,4-triazole from hydrochloric acid solutions

The extraction of gold(III), palladium(II), and platinum(IV) with 1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl]-1H-1,2,4-triazole from hydrochloric acid solutions into toluene has been studied. The extraction follows the anion-exchange mechanism. The concentration constants and thermodynamic parameters of the extraction reaction have been calculated. The reagent is proposed for use in the extraction of the sum of precious metals.     

Reaction of acetyl chloride with triphenylarsine oxide

Conclusions The reaction of acetyl chloride with triphenylarsine oxide (21 molar ratio) in anhydrous toluene leads to formation of triphenylarsine dichloride and acetic anhydride.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1432–1434, June, 1970.     

Solvent extraction of gold(III) by octadecyldimethylbenzylammonium chloride (ODMBAC) from chloride solution

The mechanism of solvent extraction of gold(III) in hydrochloric acid media with quaternary ammonium salt octadecyl dimethyl benzyl ammonium chloride dissolved in chloroform was studied. The influences of temperature, NaCl and HCl concentraction on the extraction equilibrium were also investigated. The extraction reaction is exothermic (H° = -28.53±0.15 kJ/mol) and log K _ex = 5.47±0.04.