EuI2—RbI二元体系相图

用差热分析和Ｘ射线粉末衍射法研究了ＥｕＩ２－ＲｂＩ二元体系相图。表明该体系是一个有４个化合物生成的复杂低共熔体系，其中ＲｂＥｕ２Ｉ５和ＲｂＥｕＩ３为固液同组成化合物，Ｒｂ３ＥｕＩ５和Ｒｂ４ＥｕＩ６为固液异组成化合物。初步确定Ｒｂ３ＥｕＩ５为立方晶系：ａ＝１．０１２４（１）ｎｍ；Ｒｂ４ＥｕＩ６为四方晶系：ａ＝１．３７１９（５）ｎｍ，Ｃ＝０．６４５８（５）ｎｍ．     

金属性Zintl相化合物RE_3Cu_3Sb_4(RE=Nd,Sm,Tb,Dy,Ho)的合成、结构及成键特性

用电弧熔炼方法合成了化合物ＲＥ３Ｃｕ３Ｓｂ４（ＲＥ＝ Ｎｄ,Ｓｍ ,Ｔｂ,Ｄｙ,Ｈｏ）, 采用粉末Ｘ射线衍射方法测定了其晶体结构。化合物属立方晶系,Ｙ３Ａｕ３Ｓｂ４ 类型, 空间群Ｉ４３ｄ（Ｎｏ．２２０）,皮尔森玛ｃＩ４０。晶胞参数：Ｎｄ３Ｃｕ３Ｓｂ４ ：ａ＝０．９６７４９（１） ｎｍ, Ｖ＝０．９０５６１（３） ｎｍ３;Ｓｍ３Ｃｕ３Ｓｂ４：ａ＝ －０．９６１４５（１） ｎｍ ,Ｖ＝０．８８８７５（３） ｎｍ３ ;Ｔｂ３Ｃｕ３Ｓｂ４： ａ＝０．９５３６２（１） ｎｍ , Ｖ＝ ０．８６７２１（３）ｎｍ３;Ｄｙ３Ｃｕ３Ｓｂ４： ａ＝０．９５０８８（１） ｎｍ , Ｖ＝０．８５９７５（３） ｎｍ３;Ｈｏ３Ｃｕ３Ｓｂ４ ： ａ＝０．９４８８（２） ｎｍ , Ｖ＝０．８５４１（５） ｎｍ３。每个单胞中包含４ 个化合式量。此结构中,Ｃｕ 原子均处于Ｓｂ 原子所形成的配位四面体中心, 这些共价结合的配位四面体通过共顶最终联接形成三维ＣｕＳｂ 网络,稀土原子则散布在网络之间的空隙中。化合物电荷平衡结构式可表示为ＲＥ３＋３ Ｃｕ１＋３ Ｓｂ３－４ , 化合物具有导电性, 为金属性Ｚｉｎｔｌ 相。原子成键具有典型过渡性。原子的“配位数”遵从配位环境规律。化合物的     

两个异亚砂基乙酰丙酮—N—芳基亚胺Pd（Ⅱ）配合物的合成 …

合成了两个异亚硝基乙酰丙酮－Ｎ－芳基亚胺的Ｐｄ（Ⅱ）配合物,ＰｄＣｌ（Ｃ６Ｈ５－ＩＡＩ）（Ｃ６Ｈ５ＮＨ２）（１）和ＰｄＣｌ（ｐ－ＣＨ３Ｃ６Ｈ４－ＩＡＩ）（ｐ－ＣＨ３Ｃ６Ｈ４ＮＨ２）（２）,并测定了配合物１的晶体结构。配合物１晶体属正交晶系,空间群为Ｐｃａ２１,晶胞参数ａ＝１．８５８７（４）ｎｍ,ｂ＝０．９３８０（２）ｎｍ,ｃ＝２．１２３７（４）ｎｍ,Ｚ＝８,Ｆ（０００）＝１７６０,μ＝１．１６０ｍ     

REGaSi的合成、结构及Ga-Si成键网络

用电弧熔炼法合成了系列化合物ＲＥＧａＳｉ,采用粉末Ｘ射线衍射方法测定了化合物ＳｍＧａＳｉ的晶体结构,获得其晶体学及结构修正参数为;四方晶系,ＬａＰｔＳｉ类型,（１０９）Ｉ４１ｍｄ,Ｍｒ＝２５０．０,ａ＝０．４１３４（３）ｎｍ,ｃ＝１．４２２（２）ｎｍ,Ｖ＝０．２４３０（５）ｎｍ＾３,Ｚ＝４,Ｄｘ＝６．４６４ｇ．ｃｍ＾－３,Ｆ（０００）＝４２８,Ｔ＝２９６Ｋ。     

三（3－苯基－4－苯甲酰基异噁唑酮－5）－乙醇－水合铕三元配合物的合成、表征及晶体结构

合成了三（３－苯基－４－苯甲酰基异唑酮－５）－乙醇－水合铕的配合物。有关鉴定和元素分析结果表明：该配合物的分子式为［Ｅｕ（ＰＢＩ）３（Ｃ２Ｈ５ＯＨ）（Ｈ２Ｏ）］·Ｈ２Ｏ，其中３－苯基－４－苯甲酰基异唑酮－５简记为ＨＰＢＩ，是一种新型高酸度的β－双酮。用Ｘ射线单晶衍射法测定了［Ｅｕ（ＰＢＩ）３（Ｃ２Ｈ５ＯＨ）（Ｈ２Ｏ）］·Ｈ２Ｏ的晶体结构，结果表明，该晶体属单斜晶系，Ｐ２１／ａ空间群，晶胞参数：ａ＝１．５５８６（９）ｎｍ，ｂ＝２．１２９７（７）ｎｍ，ｃ＝１．６０４（１）ｎｍ，β＝１１７．９７（５）°，Ｖ＝４．７０３（９）ｎｍ３，Ｚ＝４．中心离子铕为八配位，其配位多面体为畸变的双帽三棱柱。配位的８个氧原子分别来自３个ＰＢＩ配体中的６个氧、１个溶剂化乙醇分子中的氧和１个水分子中的氧，Ｅｕ—Ｏ配位键平均键长０．２３９１（４）ｎｍ。晶体结构中还存在１个未配位的水分子。该水分子、配位水分子、乙醇分子与配体ＰＢＩ中的Ｎ原子之间均存在强的氢键作用。同一ＰＢＩ基团内配位氧之间的平均距离为０．２８０８ｎｍ。     

具有不同类型桥基的双核Cu(Ⅱ)-Schiff碱配合物的合成和晶体结构

合成了３个分别以Ｃ２Ｏ２－４（［Ｃｕ２（Ｌ１）２（ｏｘ）］，１），ＡｃＯ－（［Ｃｕ２（ＡｃＯ）（Ｌ２）２］ＢＦ４，２）和酚氧（［Ｃｕ２（Ｌ３）２］（ＣｌＯ４）２，３）为桥基的双核铜配合物，并测定了１的复配合物［Ｃｕ２（Ｌ１）２（ｏｘ）］·［Ｆｅ（ＯＨ）２（Ｈ２Ｏ）４］ＣｌＯ４·Ｈ２Ｏ（１′）及２和３的晶体结构．Ｘ射线衍射结果表明：１′，２和３分别属于Ｆｄｄｄ，Ｐ２１／ｃ和Ｐ２１／ｃ空间群．晶胞参数：［Ｃｕ２（Ｌ１）２（ｏｘ）］［Ｆｅ（ＯＨ）２（Ｈ２Ｏ）４］ＣｌＯ４·Ｈ２Ｏ，ａ＝２．４３９０（４）ｎｍ，ｂ＝３．０５３８（６）ｎｍ，ｃ＝１．８４９４（６）ｎｍ，α＝β＝γ＝９０．００°；２，ａ＝０．８４７（１）ｎｍ，ｂ＝２．６５４２（８）ｎｍ，ｃ＝１．４１００（６）ｎｍ，β＝９１．３４（６）°；３，ａ＝０．７６４６（３）ｎｍ，ｂ＝１．６９８３（３）ｎｍ，ｃ＝２．４４１７（３）ｎｍ，β＝９７．１１°     

Eu（β－NMA）_3PHEN的晶体结构及光谱研究

标题化合物Ｍ＝８４５．６９，三斜晶系，空间群，ａ＝１．１７１８（２）ｎｍ，ｂ＝１．５６７０（３）ｎｍ，ｃ＝１．０００２（２）ｎｍ，α＝９９．９７（１）°，β＝９０．１３（１）°，γ＝９８．３６（２）°，Ｖ＝１．７８８９（５）ｎｍ~３，Ｚ＝２，Ｆ（０００）＝８４８，Ｄ_ｘ＝１．５７ｇ·ｃｍ~３，λ（ＭｏＫα）＝０．０７１０６９ｎｍ，μ＝１８．０６ｃｍ~（－１），Ｔ＝２９５Ｋ，Ｒ＝０．０４０．中心Ｅｕ（Ⅲ）离子与周围６个氧和１对氮原子配位，配位多面体属四方反棱柱体，其点对称性为Ｃ_１。     

EuI2—KI二元系相图

用差热分析和Ｘ射线衍射的方法研究了ＥｕＩ２－ＫＩ二元体系在３＊１０＾－４Ｐａ压强下的低压相图。实测相图显示，该二元体系存在一个同份熔化化合物ＫＥｕ２Ｉ５和一个异份熔化化合物Ｋ４ＥｕＩ６，两个在相共晶点的温度和成分分别为７３７Ｋ，２０％ＫＩ和７１３Ｋ，６０％ＫＩ。Ｘ射线粉末衍射的结果表明，ＫＥｕ２Ｉ５的晶体结构参数与文献数据十分吻合。本文还讨论了实测相图的误差来源，并由相图计算出ＥｕＩ２的熔化热为２１０１２Ｊ．ｍｏｌ＾－１。     

四氢糠基环戊二烯稀土氯化物的合成及表征

报道了四氢糖基环戊烯基稀土氯化物的合成，用元素分析，红外光谱，质谱和核磁共振谱表征这类化合物的组成为（Ｃ４Ｈ７ＣＯＨ２Ｃ５Ｈ４）２ＬｎＣ１（Ｌｎ＝Ｎｄ，Ｇｄ，Ｄｙ，Ｅｒ），测定了（Ｃ４Ｈ７ＯＣＨ２Ｃ５Ｈ４）２ＤｙＣｌ的晶体结构属正交晶系，Ｐ２，２１２１空间群，晶胞参数：α＝１．１８０９（３）ｎｍ，ｂ＝１．２１４９（４）ｎｍ，ｃ＝１．３３７７（５）ｎｍ，ｚ＝４，Ｄｃ＝１．７２ｇ／ｃｍ＾３，Ｒ＝０．０     

[Li（THF）][t—BuCp）Yb（NPh2）3]的合成及晶体结构

合成了标题配合物（Ｌｉ（ＴＨＦ）４］［ｔ－ＢｕＣｐ）ＹｂＮｐｈ２）３］，经元素分析、红外光谱表征，并测定了其晶体结构。配合物正交晶系，Ｐｂｃａ空间群，晶体学参数ａ＝１．４５１５（５），ｂ＝２．２８３３（５），ｃ＝３．３５５４（６）ｎｍ；Ｖ＝１１．１２０９（５）ｎｍ＾３，Ｄｃ＝１．３１ｇ．ｃｍ＾－３；Ｆ（０００）＝４４．２３，Ｚ＝８。最后一致性因子Ｒ＝０．０４７，ＲＷ＝０．０４５，平均Ｙｂ－Ｎ键长是     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.