Determination of Free Fatty Acids by Diphasic-Two Dimensional TLC-Fluorescence Spectrodensitometry

Abstract

A sensitive method for the determination of fatty acids is presented. Free fatty acids (20pg-lμg), were first covalently reacted in a displacement reaction with a 70 μM solution of the fluorescent probe, 4-bromomethy 1–6, 7-dimethoxy-coumarin (Br- Mdmc) and the fluorescence-labelled fatty acid esters were separated in a diphasic-two dimensional high performance thin layer chromatographic system (diphasic-2D-TLC). This system consisted of a reversed phase C18 layer (2 × 10 cm) interfaced with a AgNO3-modified silica gel layer (10 × 10 cm). Aliquots of the reeaction mixture were streaked onto the C18 layer, and the plates developed in the first dimension using acetonitrile-acetone-methanol-water (60:20:10:10, v/v/v/v) (solvent 1) as the mobile phase. Development in this dimension gave separation based on the number of carbons. Following the first development, the plates were dried and the silica gel layer impregnated with a saturated solution of AgNO3 in methanol. The plates were then predeveloped in the second dimension in chloroform-ethyl acctate-acetonitrile (90:8:2, v/v/v) (solvent 2) to the plate interphase, and developed in solvent 2 in the second dimension. Development in the AgNO3-modified silica gel, allowed separation based on the number of double bonds. The fluorescent bands were scanned with a Shimadzu CS-9000 spectrodensitometer in the fluorescent mode, using 352 nm as the excitation wavelength and a cut-off filter at 400 nm. Baseline resolution was obtained for all 15 fatty acids tested. The lower linear detector response extended to 0.13 pmol. This method provids a sensitive means of analysis of fatty acids present in biological systems.     

Use of short-end injection capillary packed with a glycopeptide antibiotic stationary phase in electrochromatography and capillary liquid chromatography for the enantiomeric separation of hydroxy acids

A new chiral stationary phase (CSP) was prepared by reacting MDL 63,246 (Hepta-Tyr), a glycopeptide antibiotic belonging to the teicoplanin family, with 5-μm diol-silica particles. The CSP mixed with 5-μm amino silica particles (3:1) was packed into 75-μm fused-silica capillaries for only 6.6 cm and used for electrochromatographic experiments analyzing several hydroxy acid enantiomers. A reversed electroosmotic flow carried both analytes and mobile phase towards the anode in a short time (1–3 min), being baseline resolved all the studied analytes. In order to achieve the fastest enantiomeric resolution of the studied hydroxy acids, the effect of several experimental parameters such as mobile phase composition (organic modifier type and concentration, pH of the buffer and ionic strength), capillary temperature and applied voltage on enantioresolution factor, retention time, enantioselectivity were evaluated. The packed capillary column allowed the separation of mandelic acid enantiomers in less than 72 s with resolution factor R_s=2.18 applying a voltage of 30 kV and eluting with a mobile phase composed by 50 mM ammonium acetate (pH 6)–water–acetonitrile (1:4:5, v/v). The CSP was also tested in the capillary liquid chromatography mode resolving all the studied enantiomers applying 12 bar pressure to the mobile phase [50 mM ammonium acetate (pH 6)–water–methanol–acetonitrile, 1:4:2:3, v/v)], however, relatively long analysis times were observed (12–20 min).     

Stability indicating method for the determination of paracetamol in its pharmaceutical preparations by TLC densitometric method

Simple, sensitive and accurate thin layer procedure was described for a quantitative determination of paracetamol in its bulk powder and in its pharmaceutical dosage forms in the presence of its degradation product. The method consists of dissolving the drug in methanol and then spotting the solution on a thin layer of silica gel G254. Paracetamol was separated on silica gel using the mixture of the mobile phase, ethyl acetate: benzene: acetic acid in a ratio (1:1:0.05 v/v/v).Absorbance measurements (detection of reflectance) of the separated drug were carried out at 250 nm. Calibration curves were established in the concentration range of 5–20 mcg/spot for paracetamol. Quantitation is achieved by comparing the area under the peaks obtained from scanning the thin layer chromatographic plates in a spectrodensitometer. The method has been successfully applied to pharmaceutical preparations (capsules) and the results obtained were statistically compared with those obtained by applying the reference method.     

Simultaneous Determination of Tinidazole and Furazolidone in Suspension by HPTLC and HPLC

Abstract

High performance thin layer chromatographic (HPTLC) and high performance liquid chromatographic (HPLC) methods were developed for the simultaneous determination of Tinidazole and Furazolidone in suspension.

In the HPTLC method the separation of Tinidazole and Furazolidone was carried out on silica gel 60F₂₅₄ HPTLC glass plate using chloroform:methanol:ammonia (9:1:0.1 v/v) as a mobile phase. Rf values obtained were 0.63 and 0.79 for Furazolidone and Tinidazole respectively. Densitometric evaluation was done at 335 nm. Linearity was obtained within the concentration range 10–50 μg/ml and 3.5–17.5 μg/ml for Tinidazole and Furazolidone respectively.

The second method is based on high performance liquid chromatography on a reversed phase column (μ Bondapak C₁₈) using a mobile phase comprised of water: acetonitrile: triethylamine (80:20:0.1 v/v) adjusted to pH = 3.0 with dil. phosphoric acid. Retention times were 5.24 and 7.82 min for Tinidazole and Furazolidone respectively at a flow rate of 1.5 ml/min. Detection was done at 335 nm. Linearity was obtained within the concentration range 30–180 μg/ml and 10.5–63 μg/ml for Tinidazole and Furazolidone resp.     

Ten marker compounds-based comparative study of green tea and guava leaf by HPTLC densitometry methods: antioxidant activity profiling

High-performance thin layer chromatography (HPTLC) method for the separation and quantitative determination of ten markers (catechins, flavonoids, and phenolics) in different extracts of green tea and guava leaf has been developed and the antioxidant activity profiles of the two plant extracts have been determined. Ten marker compounds have been resolved using silica gel 60 F(254) plates, toluene/acetone/formic acid (5:4:1 v/v/v) for markers 1-6, and toluene/ethyl acetate/formic acid/methanol (3:3:0.8:0.2 v/v/v/v) for markers 7-10 as the mobile phases. The high-performance thin layer chromatography densitometry was performed at wavelengths of 282 and 285 nm for the markers 1-6 and 7-10, respectively. Potent antioxidant activity and the presence of phenolics and flavan-3-ols has been observed for the guava leaf extracts suggestive of its use as an alternate economical source of antioxidants over green tea--the well-established food additive/nutraceutical agent.     

Validated HPLC and HPTLC Method for Simultaneous Quantitation of Amlodipine Besylate and Olmesartan Medoxomil in Bulk Drug and Formulation

Two methods are described for simultaneous determination of amlodipine besylate and olmesartan medoxomil in formulation. The first method was based on the HPTLC separation of two drugs on Merck HPTLC aluminium sheets of silica gel 60 F₂₅₄ using n-butanol: acetic acid: water (5:1:0.1, v/v/v) as the mobile phase. The second method was based on the HPLC separation of the two drugs on the RP-PerfectSil-100 ODS-3–C₁₈ column from MZ-Analysetechnik GmbH, Germany and acetonitrile/0.03 M ammonium acetate buffer (pH = 3) in a ratio of 55:45 as the mobile phase. Both methods have been applied to formulation without interference of excipients of formulation.     

Stability indicating reversed-phase high-performance liquid chromatographic and thin layer densitometric methods for the determination of ziprasidone in bulk powder and in pharmaceutical formulations

Two sensitive and reproducible methods were developed and validated for the determination of ziprasidone (ZIP) in the presence of its degradation products in pure form and in pharmaceutical formulations. The fi rst method was based on reversed-phase high-performance liquid chromatography (HPLC), on a Lichrosorb RP C(18) column using water:acetonitrile:phosphoric acid (76:24:0.5 v/v/v) as the mobile phase at a fl ow rate of 1.5 mL min(-1) at ambient temperature. Quantification was achieved with UV detection at 229 nm over a concentration range of 10-500 micro g mL(-1) with mean percentage recovery of 99.71 +/- 0.55. The method retained its accuracy in presence of up to 90% of ZIP degradation products. The second method was based on TLC separation of ZIP from its degradation products followed by densitometric measurement of the intact drug spot at 247 nm. The separation was carried out on aluminium sheet of silica gel 60 F(254) using choloroform:methanol:glacial acetic acid (75:5:4.5 v/v/v) as the mobile phase, over a concentration range of 1-10 micro g per spot and mean percentage recovery of 99.26 +/- 0.39. Both methods were applied successfully to laboratory prepared mixtures and pharmaceutical capsules.     

Comparison of high performance TLC and HPLC for separation and quantification of chlorogenic acid in green coffee bean extracts

Two chromatographic methods, high-performance TLC (HPTLC) and HPLC, were developed and used for separation and quantitative determination of chlorogenic acid in green coffee bean extracts. For HPTLC silica gel Kieselgel 60 F 254 plates with ethyl acetate/dichlormethane/formic acid/acetic acid/water (100:25:10:10:11, v/v/v/v/v) as mobile phase were used. Densitometric determination of chlorogenic acid by HPTLC was performed at 330 nm. A gradient RP HPLC method was carried out at 330 nm. All necessary validation tests for both methods were developed for their comparison. There were no statistically significant differences between HPLC and HPTLC for quantitative determination of chlorogenic acid according to the test of equality of the means.     

Chromatographic determination of itopride hydrochloride in the presence of its degradation products

Two sensitive and reproducible methods are described for the quantitative determination of itopride hydrochloride (IH) in the presence of its degradation products. The first method is based on HPLC separation on a reversed phase Kromasil column [C18 (5-microm, 25 cm x 4.6 mm, ID)] at ambient temperature using a mobile phase consisting of methanol and water (70:30, v/v) adjusted to pH 4.0 with orthophosphoric acid with UV detection at 258 nm. The flow rate was 1.0 mL per min with an average operating pressure of 180 kg/cm2. The second method is based on HPTLC separation on silica gel 60 F254 using toluene:methanol:chloroform:10% ammonia (5.0:3.0:6.0:0.1, v/v/v/v) as mobile phase at 270 nm. The analysis of variance (ANOVA) and Student's t-test were applied to correlate the results of IH determination in dosage form by means of HPLC and HPTLC methods. The drug was subjected to acid and alkali hydrolysis, oxidation, dry heat, wet heat treatment, UV, and photodegradation. The proposed HPLC method was utilized to investigate the kinetics of the acidic, alkaline, and oxidative degradation processes at different temperatures and the apparent pseudo-first-order rate constant, half-life, and activation energy were calculated. In addition the pH-rate profile of degradation of IH in constant ionic strength buffer solutions in the pH range 2-11 was studied.     

Separation of R(+)-and S(-)-Benzyl-3-Tetrahydrofuroates Using Two Different Chiral Columns

Abstract

A chiral separation of N(+)-and S(-)-benzyl-3-tetrahydrofuroate (I) and p-nitrobenzyl-3-tetrahydrofuroate (II) using a Chiralcel OB^© (cellulose tribenzoate) column with a hexane/2-propanol (60:40 v/v) mobile phase is described. Enantiomeric purity of R(+)-I was evaluated using the same chromatographic conditions. I was also separated using a Chiralspher^© (polyamides bonded to silica gel) column with an ethanol/distilled water (50:50 v/v) mobile phase.     

A new HPTLC densitometric method for analysis of swertiamarin in Enicostemma littorale and commercial formulations

A high-performance thin layer chromatographic densitometric method for the analysis of swertiamarin in 60% methanolic extract of Enicostemma littorale and commercial formulations has been developed and validated in this study. Swertiamarin was separated on aluminium-backed silica gel 60 F??? plates using ethyl acetate : methanol : water (77 : 15 : 8)% v/v as the mobile phase. This system was found to give a compact spot of swertiamarin at R(f) value 0.36 ± 0.01. The limit of detection and limit of quantification were found to be 31.25 and 103.12 ng spot?1, respectively. The proposed method was employed with a high degree of precision and accuracy for the estimation of swertiamarin in methanolic extract of Enicostemma littorale and in commercial formulations.     

Thin Layer Chromatographic Screening of Coal Liquids

Abstract

Procedures are described for the thin layer chromatographic (TLC) analysis of coal-derived liquids. After solvent selection using Selectosol (1) radial TLC, a series of compounds typically found in coal liquids was used to demonstrate their elution behavior on silica gel. It was determined that unactivated (Brockman 4) silica plates series developed with isooctane/tetrahydrofuran (THF) (80:20, v/v) provided the best separation. The order of elution was saturate >hydroaromatic >polynuclear aromatic (PNA)>phenols ≥ nitrogen bases. The use of two-dimensional TLC with reverse phase and silica contiguous on the same plate (Whatman Multi-K) is discussed for the rapid separation and identification of coal liquid components. Trimethylsilyl ether derivatives were prepared of phenols and alcohols present in coal conversion products. This technique proved most useful in that the TMS-derivatives behaved similarly to their parent PNA, in order of elution, on silica plates using a moderately active mobile phase (isooctane: THF,80:20, v/v). TLC and the reactions described provide a semi-quantitative measure of the degree of hydrogenation of coal-derived liquids.     

Identification and quantitation of polymyxin B, framycetin, and dexamethasone in an ointment by using thin-layer chromatography with densitometry

A new thin-layer chromatographic-densitometric method has been developed for rapid identification and quantitative determination of polymyxin B, framycetin, and dexamethasone in a dental ointment. Silica gel 60 and F254 silica gel 60 plates were used for separating antibiotics and dexamethasone acetate, respectively. When determining framycetin and polymyxin B, chromatograms were developed by using 2 mobile phases, namely methanol and methanol-n-butanol-ammonia (25%)-chloroform (14 + 4 + 9 + 12, v/v/v/v/). The densitometric measurements were made at 550 nm after detection with 0.3% ninhydrin solution. Dexamethasone was determined by using the mobile phase cyclohexane-ethyl acetate (2 + 3, v/v) and ultraviolet densitometric recording at 245 nm. The results obtained for individual constituents with the chromatographic-densitometric method demonstrate similar accuracy, relative standard deviation values from 1.49 to 2.47%, and relative error values from 0.02 to 0.81% and are comparable to those obtained with the reference methods.     

Simultaneous HPTLC and RP-HPLC methods for determination of bumadizone in the presence of its alkaline-induced degradation product

Accurate, selective, sensitive and precise HPTLC‐densitometric and RP‐HPLC methods were developed and validated for determination of bumadizone calcium semi‐hydrate in the presence of its alkaline‐induced degradation product and in pharmaceutical formulation. Method A uses HPTLC‐densitometry, depending on separation and quantitation of bumadizone and its alkaline‐induced degradation product on TLC silica gel 60 F₂₅₄ plates, using hexane–ethyl acetate–glacial acetic acid (8:2:0.2, v/v/v) as a mobile phase followed by densitometric measurement of the bands at 240 nm. Method B comprises RP‐HPLC separation of bumadizone and its alkaline‐induced degradation product using a mobile phase consisting of methanol–water–acetonitrile (20:30:50, v/v/v) on a Phenomenex C₁₈ column at a flow‐rate of 2 mL/min and UV detection at 235 nm. The proposed methods were successfully applied to the analysis of bumadizone either in bulk powder or in pharmaceutical formulation without interference from other dosage form additives, and the results were statistically compared with the established method. Copyright © 2011 John Wiley & Sons, Ltd.     

A simple TLC and HPTLC method for separation of selected steroid drugs

Chromatographic properties of five steroid drugs: cortisone, hydrocortisone, methylprednisolone, prednisolone and norgestrel have been studied by normal-, reversed-phase and hydrophilic neutral cyano-bonded silica stationary phase with five binary mobile phases (acetonitrile-water, acetonitrile-DMSO, acetonitrile-methanol, acetone-petroleum ether, acetone-water) in which the concentration of organic modifier was varied from 0 to 100% (v/v). This study reports the optimization of steroid hormones separation. Chromatographic retention data and possible retention mechanisms are discussed. Separation abilities of mobile and stationary phases were studied using the principal component analysis method. The best separation of methylprednisolone and prednisolone is with a chromatographic system included silica gel as stationary phase and mixture of acetonitrile and DMSO (10:90 v/v). These two anti-inflammatory drugs can be fast separated from norgestrel when CN is used as stationary phase and acetone and water (40:60 v/v) as mobile phase. The highest values of the parameter Δ(ΔG°) and alfa for cortisone and hydrocortisone was observed in case of using CN as stationary phase and water-acetonitryle (40:60 v/v) as mobile phase.      

表面活性剂流动相用于混合固定相薄层色谱

将表面活性剂流动相用于ＧＤＸ与硅胶Ｇ混合固定相薄层色谱,用表面活性剂、乙醇和水的混合流动相对一些水溶性食品染料及指示剂等进行了分离,得到满意的结果,可以部分代替非极性键合相薄板。     

RP-LC and HPTLC Methods for the Determination of Olmesartan Medoxomil and Hydrochlorothiazide in Combined Tablet Dosage Forms

Two new, rapid, precise, accurate and specific chromatographic methods were described for the simultaneous determination of olmesartan medoxomil and hydrochlorothiazide in combined tablet dosage forms. The first method was based on reversed phase liquid chromatography using an Eurosphere 100 RP C18 column (250 × 4.6 mm ID, 5 μm). The mobile phase was methanol–0.05% o-phosphoric acid (60:40 v/v) at a flow rate of 1.0 mL min^?1. Commercially available tablets and laboratory mixtures containing both drugs were assayed and detected using a UV detector at 270 nm. The second method involved silica gel 60 F₂₅₄ high performance thin layer chromatography and densitometric detection at 254 nm using acetonitrile–ethyl acetate–glacial acid (7:3:0.4 v/v/v) as the mobile phase. Calibration curves ranged between 200–600 and 125–375 ng spot^?1 for olmesartan and hydrochlorothiazide, respectively.     

Separation and determination of rofecoxib and its degradation products by TLC chromatography

A thin layer chromatography with densitometry method for the determination of rofecoxib and degradation products is described. The chromatographic separation was performed on silica gel TLC plates as a stationary phase and chloroform-acetone-toluene-glacial acetic acid (12: 5: 2: 0.1, v/v/v/v) as a mobile phase. Densitimetric detection was carried out at 256 nm. The method is of high sensitivity and low LOD and LOQ: from 0.35 μg/spot to 1.05 μg/spot. The recovery was satisfactory at 98.62%. In addition, the stability of rofecoxib in solutions was investigated, including an effect of solution pH, temperature and incubation time. The method is rapid, easy and selective, particularly for the analysis of rofecoxib formulations. The article is published in the original.     

Thin-layer chromatographic fingerprinting of the nonvolatile fraction extracted from the medicinal herb Cistus incanus L.

ABSTRACT

The aim of this study was to provide the first from-start-to-end thin-layer chromatographic method of fingerprinting the Cistus incanus L. raw herbal material, with a purpose to further use it for rapid screening, authentication, and quality control of the traded C. incanus L. herbs. To this effect, 12 different C. incanus L. samples purchased as herbal teas from a local market were extracted by means of the accelerated solvent extraction (ASE) with chemometrically optimized solvent extraction mixture and temperature (methanol–water, 27:73, v/v; 130°C), to derive the polar fraction from the plant samples. Then, the extracts were developed in two thin-layer chromatographic systems, both using the commercially precoated silica gel 60 chromatographic plates, yet two different mobile phases (mobile phase 1, ethyl acetate–formic acid–acetic acid–water, 100:11:11:13, v/v/v/v, and mobile phase 2, ethyl acetate–dichloromethane–formic acid–acetic acid–water, 100:10:10:10:11, v/v/v/v/v). The chromatograms were densitometrically scanned in the reflectance mode at the wavelength λ?=?366?nm to obtain fingerprints of the extracts derived from individual C. incanus L. samples. Mobile phase 2 performed slightly better, because with its use, the maximum number of 11 peaks could be seen in the respective fingerprints, whereas with mobile phase 1, the maximum number of 10 peaks only. Then an antioxidant potential of the investigated herbal extracts was assessed, making use of mobile phase 2 and the 0.20% methanol solution of 2,2-diphenyl picrylhydrazyl as a visualizing reagent. The resulting chromatograms were densitometrically scanned in the extinction mode at the wavelength λ?=?550?nm to obtain biological fingerprints of the extracts. Finally, chromatographic and biological fingerprints underwent a semiquantitative evaluation in terms of the contents of the extracted polar fraction and an overall antioxidant potential of the individual plant species.     

分散固相萃取-超高效液相色谱-串联质谱法测定奶粉中7种非选择性环氧化酶抑制药物

建立并优化了使用分散固相萃取-超高效液相色谱-串联质谱（dSPE-UPLC-MS/MS）检测奶粉中7种非选择性环氧化酶（COX）抑制药物残留的方法。样品用0.01 mol/L pH 2.5抗坏血酸溶液-乙腈-乙酸乙酯（2：5：5，v/v/v）溶液提取后，加入无水硫酸钠、十八烷基键合硅胶吸附剂（C₁₈-N）及NH₂-丙基乙二胺吸附剂（NH₂-PSA）组成的盐包进行净化。以Waters CORTECS UPLC C₁₈（100 mm×2.1 mm，1.6 μm）色谱柱分离，流动相为0.1%（体积分数）甲酸水溶液和0.1%（体积分数）甲酸乙腈，配合多反应监测（MRM）模式定性定量分析水杨酸、布洛芬、双氯芬酸钠、吲哚美辛、吡罗昔康、萘普生和保泰松7种成分。结果表明：7种化合物线性相关性良好，相关系数（r²）≥ 0.9957。高、中、低3个水平下，加标回收率为76.4%~89.8%。定量限为2~5 μg/kg。该方法前处理简单，回收率高，重现性好，可作为奶粉中7种非选择性COX抑制药物残留的有效检测方法。