首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Coherent terahertz radiation in a widely step-tunable range of 72.3–2706 μm (0.11–4.15 THz) has been generated in GaAs crystal by difference-frequency generation using one CO2 laser with dual-wavelength output. The peak power of THz pulse reaches 35 W at the wavelength of 236.3 μm, which corresponds to a pulse energy of 2.1 μJ. An average power of 10 μW has been achieved when working repetitively. This efficient terahertz radiation source is more compact and widely tunable than other THz sources pumped by CO2 laser.  相似文献   

2.
The dependence of the characteristic X-ray radiation yield from CaF2 crystal on the formed microchannel depth under highly intensive (I ∼ 3 × 1015 W/cm2) laser pulses with different contrast was obtained. The maximum of the characteristic X-ray radiation yield at these experimental conditions corresponded to the microchannel depth of 30–50 μm. The efficiency of the laser radiation conversion to the characteristic X-ray radiation increased from 6 × 10−8 for the surface up to 10−7 in the microchannel. The dependence of the characteristic X-ray radiation yield on the viewing angle showed that the source of X-ray radiation was located near the surface inside the microchannel.  相似文献   

3.
We have achieved intracavity parametric conversion of the radiation from a laser based on Nd:YVO4 with high-power diode pumping. An LiF2- crystal was used as the passive Q-switch for the Nd:YVO4 laser. We have shown that by using an active element in the master laser with a passive region, we can form pulsed laser beams at a wavelength of 1.57 μm with peak power 3.2 kW and repetition rates up to 80 kHz, with beam quality parameter 1.4–1.8. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 1, pp. 5–8, January–February, 2006.  相似文献   

4.
Fabrication of patterned materials in ferroelectric LiNbO3 and LiTaO3 crystals using femtosecond laser micromachining is presented and discussed. Damage feature sizes in the 10–100 μm range were achieved using 800-nm, 50-fs (FWHM) ultra-fast laser pulses with energies ranging from 10 μJ up to 350 μJ. Fabrication of polaritonic devices such as waveguides, resonators, focusing reflectors, diffractive and dispersive elements, photonic band gap materials, and other microstructures is demonstrated. PACS 77.84.Dy; 42.62.Cf; 71.36.+c  相似文献   

5.
Yb2O3 polycrystals with a size of up to 10 mm are synthesized using the sintering and melting of the ultrapure Yb2O3 powders by the CO2-laser radiation with the power P L ≤ 100 W at the wavelength λ = 10.6 μm at the melting point T m = 2703 K, forming due to surface tension in melt, and crystallization in air. The analysis of the polycrystal microstructure using the methods of optical and electron microscopy and X- ray diffractometry shows that perfect oxide crystallites are formed in the course of crystallization after melting-through. The transformation of the luminescence and selective heat radiation (SHR) spectra of the Yb2O3 polycrystals is studied under the resonant excitation at λ ≈ 975 nm using a laser diode and the laser heating at the wavelength λ = 10.6 μm. When the resonant excitation power of the Yb3+ ions increases from 0.15 to 4.5 W, the Stokes luminescence of the Yb2O3 polycrystals is sequentially transformed into SHR and the thermal radiation of the crystal lattice. The transformation of the emission spectra of the Yb2O3 polycrystals with an increase in the laser heating intensity by about four orders of magnitude can be represented as the low-temperature heat radiation, spectral burst of the thermodynamically nonequilibrium SHR of the Yb3+ ions, and the high-temperature radiation of the crystal lattice. The temperature dependence of the luminescence spectra and SHR of the Yb2O3 polycrystals on the intensity of the laser and laser-thermal excitation and the concentration quenching of the Yb3+ luminescence in oxides indicate the key role of the interaction of the f-electron shell of the Yb3+ ions with the natural oscillations of the crystal lattice in the processes of the multiphonon excitation and nonradiative (multiphonon) and radiative (vibronic) relaxation.  相似文献   

6.
Photoacoustic spectroscopy (PAS) is one of the important branches of spectroscopy, which enables one to detect light-induced heat production following the absorption of pulsed radiation by the sample. As2S3, As2Se3 and GeSe2 exhibit a wide variety of photo-induced phenomena that enable them to be used as optical imaging or storage medium and various electronic devices, including electro-optic information storage devices and optical mass memories. Therefore, accurate measurement of thermal properties of semiconducting films is necessary to study the memory density. The thermal conductivity of thin films of As2S3 (thickness 100 μm and 80 μm), As2Se3 (thickness 100 μm and 80 μm) and GeSe2 (thickness 120 μm and 100 μm) has been measured using PAS technique. Our result shows that the thermal conductivity of thicker films is larger than the thinner films. This can be explained by the thermal resistance effect between the film and the surface of the substrate.   相似文献   

7.
We report 12 new THz (far-infrared) laser lines from methanol (CH3OH), ranging from 58.1 μm (5.2 THz) to 624.6 μm (0.5 THz). A 13CO2 laser of wide tunability (110 MHz) has been used for optical pumping, allowing access to previously unexplored spectral regions. Optoacoustic absorption spectra were used as a guide to search for new THz laser lines, which have been characterized in wavelength, polarization, offset, relative intensity, and optimum operation pressure. For 20 laser lines previously observed, we have measured the absorption offset with respect to the 13CO2 laser line center. PACS 33.20.Ea; 33.20.Vq; 33.80.-b  相似文献   

8.
We investigated a simple and productive micromachining method of silica glass by ablation using a TEA CO2 laser (10.6 μm) with a spatial resolution down to sub-wavelength scale. The silica glass was irradiated by the TEA CO2 laser light through a copper grid mask with square apertures of 20×20 μm2 attached to the silica glass surface. After the irradiation, circular holes with a diameter of several μm were formed on the silica glass surface at the centers of the apertures due to the Fresnel diffraction effect. The minimum diameter of the holes was 3.4 μm. The characteristics of the micromachining are discussed based on the electric field distributions of the CO2 laser light under the mask using a three-dimensional full-wave electromagnetic field simulation.  相似文献   

9.
A three-laser heterodyne system was used to measure the frequencies of twelve previously observed far-infrared laser emissions from the partially deuterated methanol isotopologues 13CD3OH and CHD2OH. Two laser emissions, a 53.773 μm line from 13CD3OH and a 74.939 μm line from CHD2OH, have also been discovered and frequency measured. The CO2 pump laser offset frequency was measured with respect to its center frequency for twenty-four FIR laser emissions from CH3OH, 13CD3OH and CHD2OH. PACS 07.57.Hm; 42.55.Lt; 42.62.Eh  相似文献   

10.
The effect of resonator length on ZnGeP2 doubly resonant optical parametric oscillator was reported in this letter. With the employment of a Tm,Ho:GdVO4 laser as the pump source at 2.05 μm, we have found that there are obvious peaks of the output power when the resonator lengths are matched to the length of the pump source. The ZGP OPO can generate a maximum output power of 4.27 W at 3.80 μm signal and 4.45 μm idler when the resonator length matches that of the pump source.  相似文献   

11.
A method has been proposed to analyze the dynamics of interband two-photon absorption in a nonlinear medium excited by a sequence of picosecond laser pulses of variable intensity and continuous probe radiation. Induced absorption leading both to hysteresis in the dependence of the absorption on the intensity of laser pump radiation and to the opacity of crystals at the pump wavelength has been revealed in initially transparent ZnWO4 and PbWO4 crystals irradiated by a train of 523.5-nm pulses with a duration of 20 ps at pump intensities of 5 to 140 GW/cm2. The kinetics of an increase in absorption and its subsequent relaxation at a 523.5-nm picosecond excitation of the crystals have been measured with continuous 633-nm probe radiation. An exponential component of the increase in absorption with the time constant τ = 2−3.5 and 8–9.5 μs depending on the direction of the linear polarization of pump radiation has been revealed at 300 K in ZnWO4 and PbWO4 crystals, respectively. The absorption relaxation kinetics in the crystals are complicated and approach an exponential at a late stage with the constant τ = 40−130 and 12–80 ms for the ZnWO4 and PbWO4 crystals, respectively.  相似文献   

12.
We present a comparative analysis on the growth, the spectroscopic features, and the cw laser action of room-temperature Yb(5%):LiYF4 (YLF) and Yb(10%):KYF4 (KYF) crystals. Optical slope efficiencies of 33% and 52% have been demonstrated for Yb:YLF and Yb:KYF crystals, respectively. A remarkable wide wavelength tunability from 1.01 to 1.07 μm has been obtained for both laser crystals.  相似文献   

13.
Experimental data for cw lasing from a compact solid-state laser based on a neodymium-doped calcium-gallium-germanium-garnet crystal (Ca3Ga2Ge3O12:Nd3+) at a wavelength of 1.06 μm in the case of intense diode pumping are reported. The laser output reaches 0.7 W for a cavity 15 mm long and an active element 1 mm thick. It is shown that the output power is limited by a thermal lens placed in the active element.  相似文献   

14.
We present a temperature-dependent Sellmeier equation for the extraordinary refractive index of 5 mol % MgO doped congruent lithium niobate. This equation is adapted for wavelengths in the range of 1.3–5 μm and temperatures between 40 °C and 200 °C. The calculation of the appropriate Sellmeier coefficients is based on the wavelengths of the signal and idler radiation measured for quasi-phase-matched optical parametric generators excited by 10-ns-long, 1064-nm pulses of a Q-switched Nd:YVO4 laser. PACS 42.65.Ky; 42.70.Mp; 42.65.Yj  相似文献   

15.
In this paper, we report a Tm (5.5 at %), Ho (0.55 at %):GdVO4 laser pumped by diode laser at 800 nm. To our best knowledge, it is the first time that the use of Tm (5.5 at %), Ho (0.55 at %):GdVO4 crystal among the similar experiments. We observed the influences of LD working temperature i.e. pump wavelength to 2 μm laser conversion efficiency. In the conditions of the continuous wave and 10 kHz acousto-optic Q-switch, high efficiency output of 2.05 μm laser was obtained. With the maximum pump power of 34.6, 13.9, and 13.6 W at 2.05 μm laser output was achieved respectively. Single laser pulse width was 25.6 ns in 10 kHz acousto-optic Q-switched condition.  相似文献   

16.
The power scaling capacity of a diode end-pumped Yb:KLu(WO4)2 laser, operating in the continuous-wave (cw) and passively Q-switched regimes, has been investigated. A cw output power of 11.5 W was achieved with an optical-to-optical efficiency of 41% with respect to the incident pump power, while the slope efficiency amounts to 60%. The passively Q-switchedoperation yielded an average output power of 4.3 W at the fundamental wavelength of 1031.7 nm, and 1.15 W of Raman radiation at 1139.3 nm. The total slope efficiency for Q-switched operation was 40%. The highest pulse energy, duration, and peak power were 170 μJ, 2.2 ns, and 77.3 kW for the fundamental radiation, and 51 μJ, 2.3 ns, and 22.2 kW for the Raman radiation. PACS 42.55.Rz; 42.55.Xi; 42.55.Ye  相似文献   

17.
We report a ZGP OPO system capable of producing >6 W at a signal wavelength of 3.80 μm and an idler wavelength of 4.45 μm. The pumping source is the Tm,Ho:GdVO4 laser operated at 2.049 μm with an M 2 of 1.07. The ZGP OPO generated a total combined output power of 6.1 W at signal wavelength and idler wavelength under pumping power of 18.3 W, and an M 2 of 1.7 for OPO output was obtained.  相似文献   

18.
The results of studying the characteristics of an intracavity laser spectrometer based on a polycrystalline Cr2+:ZnSe laser operating in a pulse-periodic regime with the pulse-repetition rate of 3 kHz and pulse duration of ∼50 ns are presented. Intracavity spectra of absorption of NH3 and CH4 gases in the vicinity of 2.35 μm are measured. The estimate of the spectrometer sensitivity is provided.  相似文献   

19.
High-power blue light was generated from a diode-side-pumped Q-switched 1319 nm Nd:YAG laser with a periodically poled, stoichiometric LiTaO3 (PPSLT) crystal. The PPSLT sample used in this experiment consists of two segments in series: the first segment has a period of 14.08 μm for the second harmonic generation (SHG) and the second segment has periods of around 4.6 μm for the generation of blue light by mixing fundamental and SH. An average power of 466 mW of a 440 nm blue light was obtained at the fundamental power of ∼5.4 W with a conversion efficiency of 8.6%. The output power fluctuated by 3% over a half-hour period. This result indicates that our scheme is a practical method to construct a reliable compact blue laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi  相似文献   

20.
We report a continuous-wave (CW) mid-infrared singly resonant optical parametric oscillator (SRO) based on periodically poled MgO-doped LiNbO3 (PPMgLN) pumped by a high power, single frequency fiber laser in master oscillator-power amplifier (MOPA) configuration at 1.064 μm. Using four-mirror ring OPO cavities, at the PPMgLN’s grating period of 30.5 μm and the temperature of 23°C, we achieved the maximum idler output power of 7.2 W at 3.4 μm when the pump power was 52.8 W. The total power-conversion efficiency from the pump to the idler in this experiment is about 13.6%, and corresponds to ∼44% of quantum-limited performance.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号