Electron-phonon interaction in a free standing beryllium monolayer

We report ab initio study of the electron-phonon coupling in a free standing Beryllium monolayer. The calculations were carried out using a linear-response approach in the plane-wave pseudopotential representation. The Eliashberg spectral function α²F(ω) and the electron-phonon coupling parameter λ are evaluated at the Fermi level. The obtained results show a large contribution to the electron-phonon coupling from the low-energy transverse mode scattering.     

Electron-phonon interaction and hole (electron) lifetimes on Be(0 0 0 1)

We report an ab initio study of electron-phonon interactions on the Be(0 0 0 1) surface. The calculations based on density-functional theory were carried out using a linear response approach in the plane-wave pseudopotential representation. The phonon-induced contribution to excited hole (electron) lifetime broadening is calculated for the zone center surface state. The obtained results show a rather strong momentum dependence.     

Electron-phonon contribution to hole linewidth of the surface state on Al(0 0 1)

We report an ab initio study of the electron-phonon interaction and its contribution to the excited hole linewidth of the surface state on Al(0 0 1). We have also evaluated the phonon-induced contribution to the linewidth of the occupied energy bands of Δ₁ symmetry in bulk Al. The calculations were carried out using a linear response approach in the plane-wave pseudopotential representation.     

CF interaction with Si(1 0 0)-(2 × 1): Molecular dynamics simulation

In this study, the interaction of CF with the clean Si(1 0 0)-(2 × 1) surface at normal incidence and room temperature was investigated using molecular dynamics simulation. Incident energies of 2, 12 and 50 eV were simulated. C atoms, arising from dissociation, preferentially react with Si to form Si-C bonds. A Si_xC_yF_z interfacial layer is formed, but no etching is observed. The interfacial layer thickness increases with increasing incident energy, mainly through enhanced penetration of the silicon lattice. Silicon carbide and fluorosilyl species are formed at 50 eV, which is in good agreement with available experimental data. The level of agreement between the simulated and experimental results is discussed.     

Gd adsorption on the Mo(2 1 1) surface

The adsorption of Gd thin layers on the Mo(2 1 1) face was investigated by using Auger electron spectroscopy (AES), low electron energy diffraction (LEED), scanning tunneling microscopy (STM), X-ray photoemission spectroscopy (XPS) and measurements of the work function changes (Δφ). It was found that at 300 K Gd does not form any dilute chain structures and from the very beginning of the adsorption process Gd forms a densely packed layer. The dilute p(4 × 1) chain structure was observed by LEED after annealing thin layers (θ < 1 ML) to temperatures above 770 K. STM images confirm the existence of the p(4 × 1) structure islands. The intermixing of the substrate and adsorbate atoms takes place.     

Diffusions of small clusters on Pt(1 1 1) and Cu(1 1 1) surfaces

Diffusions of small cluster Pt₆ on Pt(1 1 1) surface and Cu₆ on Cu(1 1 1) are studied by molecular dynamics simulation, respectively. The atomic interaction is modeled by the semiempirical potential. The results show that the diffusion processes in the two systems are far different. For example, on Pt(1 1 1) surface, the hopping of single atom and the shearing of two atoms of hexamer only occur on the adatom(s) adsorbed at B-step, while on Cu(1 1 1) surface they can appear on the adatom(s) either at A-step or B-step. To the concerted translation of the parallelogram hexamer, the anisotropy in the diffusion path is observed in the two systems, the mechanisms and then the preferential paths, however, are completely different. The reasons for these diffusion characteristics and differences are discussed.     

Kinetic length and step permeability on the Si(1 1 1) (1 × 1) surface

Information on the kinetic regime of step motion and step permeability on the Si(1 1 1) (1 × 1) surface has been obtained from observations of island decay that were made with low energy electron microscopy. Island area during decay exhibits the expected power law dependence on time, with exponent, α, that is a qualitative indicator of the kinetic regime. A new method is presented for determining the kinetic length quantitatively from measurements of the decay exponent in the symmetric island decay geometry on top of a larger concentric circular island. Using this approach, we determine the kinetic length on the Si(1 1 1) (1 × 1) surface at 1163 K to be d ∼ 75a, where a is the lattice constant. It is shown that this result locates step motion firmly in the diffusion limited regime. Mass conservation of decaying island stacks is also observed at this temperature, which indicates that steps are effectively impermeable in the context of diffusion limited step kinetics.     

Formate-induced destabilization of the Cu(1 1 0) surface

Scanning tunneling microscopy (STM) images show that adsorbed formate has a profound affect on the step edges of Cu(1 1 0) surfaces at room temperature. For low exposures, the presence of formate enhances step fluctuations as confirmed by a correlation function analysis. For formate coverages approaching 0.5 monolayers, drastic restructuring of step edges is observed. Quantum chemical calculations help to explain this behavior.     

Structural study of Co/Pd(1 1 1) and CO/Co/Pd(1 1 1) by surface X-ray absorption fine structure spectroscopy

The structure of the Co thin films on Pd(1 1 1) and the effect of the CO adsorption on Co thin films were studied by Co K-edge surface X-ray absorption fine structure (XAFS). The polarization dependences of the X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra indicate that Co thin films grow in the fcc stacking mode on Pd(1 1 1) up to 12 ML. The analysis of the nearest neighbor shell shows little mechanical strain at the interface, indicating that Co atom does not grow pseudomorphically on Pd(1 1 1). There is no alloy-like structure at the interface. CO adsorption causes no structural change of the Co thin films but modifies the Co surface electronic state. These structural studies provide deep insight in the magnetic property of the Co thin films on Pd(1 1 1).     

Hydrogen-induced metallization of the 3C-SiC(0 0 1)-(3 × 2) surface

A surprising metallization of the SiC(0 0 1)-(3 × 2) surface induced by hydrogen adsorption was discovered in recent experiments. The effect was ascribed to dangling bonds created on the third layer of the surface system by H adsorption and stabilized by steric hindrance. We have investigated the surface metallization by density functional calculations. Our total-energy minimizations show that dangling bonds on the third layer are very unstable. Instead, H adatoms form angular Si-H-Si bonds on the third layer after the asymmetric dimers on the top layer have been saturated by H forming monohydrides. The novel Si-H-Si bonds on the third layer give rise to a metallic surface, indeed. But the mechanism for metallization is very different from the one suggested originally. Likewise, H atoms can also occupy bridge positions in angular Si-H-Si bonds on the second layer and induce metallization, as well. In addition to monohydrides on the top-layer dimers, we have also investigated dihydride surfaces with additional H on the second and/or third layer. The dihydride surface structure with H adsorbed on both the second and third layers is energetically most favorable and is also metallic. In all three cases the new Si-H-Si bonds are the origin of the surface metallization while its nature is somewhat more intricate, as will be discussed.     

Theoretical and experimental studies of the structure and dynamics of the CaF2(1 1 1) surface

The structure and dynamics of the CaF₂(1 1 1) surface were investigated by means of low-energy electron diffraction (LEED) and molecular dynamics (MD) simulations at 300 K. LEED beam intensities were recorded as a function of electron energy and were analyzed with the tensor LEED approach. Positions as well as mean square amplitudes of the ions in the first layers were fitted to the experimental I(E) curves. According to both LEED and MD, the CaF₂(1 1 1) surface structure is similar to the bulk-terminated structure with only small relaxation of the outermost ions. Moreover, both methods show an enhancement of vibrational amplitudes in the outermost F-Ca-F triple layer.     

LCAO study of the Cu(1 1 0)-p(2 × 1)O surface

We have performed semi-empirical LCAO calculations of the electronic structure of the Cu(1 1 0)-p(2 × 1)O surface. This has been done accounting for the Cu-Cu interactions by means of a recently proposed set of parameters, which give very good results for the bulk as well as for the surfaces of lowest Miller indices. Furthermore, the O-O interactions, which have been neglected in the preceding similar studies, have been taken into account. The resulting surface bands are in very good agreement with the overall set of the available experimental data. Several issues concerning the physical properties of this surface are addressed in the present paper: the changes induced on the clean surface bands by the adsorption and the reconstruction; the arrangement of the Cu and O atoms in the added rows; the position of the p_y antibonding band of the oxygen. In particular, we have found that the latter has an energy of −0.2 eV at the point. This result confirms an experimental indication in the same direction previously reported by Courths et al. [R. Courths, S. Hüfner, P. Kemkes, G. Wiesen, Surf. Sci. 376 (1997) 43].     

Growth process and surface structure of MnSi on Si(1 1 1)

The solid-phase epitaxial growth process and surface structure of MnSi on Si(1 1 1) were investigated by coaxial impact-collision ion scattering spectroscopy (CAICISS) and atomic force microscopy (AFM). For the Si(1 1 1) sample deposited with 30 monolayers (ML) of Mn at room temperature, the intermixing of Mn and Si gradually started at 100 °C and reached equilibrium at approximately 400 °C. At this equilibrium state, the Mn atoms were transformed into crystalline MnSi film. Further annealing caused the desorption of Mn atoms. We identified the structure of MnSi as cubic B20 and the crystallographic orientation relationships as Si(1 1 1)//MnSi(1 1 1) and Si[]//MnSi[]. The MnSi(1 1 1) surface was found to have a dense Si terminating layer on its topmost surface. On the other hand, 3 ML of Mn deposited on Si(1 1 1) reacted with Si even at room temperature and formed a pseudomorphic structure. This structure was transformed into MnSi after annealing. A filmlike morphology with protrusions was observed for the sample with 30 ML of Mn, while island growth occurred for the sample with 3 ML of Mn.     

The interaction of Fe on MgO(1 0 0) surfaces

The atomic interaction and magnetic properties of ultrathin Fe films grown on cleaved and polished MgO(1 0 0) surfaces were studied by conversion electron Mössbauer spectroscopy (CEMS). ⁵⁷Fe layers were deposited as probe atoms in different layer positions in 10 ML thick Fe films. Fe layers of different thicknesses were formed on polished and cleaved substrate surfaces at RT deposition. The analysis of the spectra showed no Fe-O^2- interaction in MgO/Fe interface. FeO phase formation was excluded. The Mössbauer spectrum of 5 ML ⁵⁷Fe sample showed enhanced internal magnetic field at 80 K. No interdiffusion of ⁵⁷Fe and ⁵⁶Fe atoms was observed between the layers at room temperature.     

Unoccupied band dispersion of Si(1 1 1):√3 × √3-Ag surface studied by time- and angle-resolved two-photon photoemission spectroscopy

Band dispersion and transient population of unoccupied electronic states on Si(1 1 1):√3 × √3-Ag surface have been studied by time-resolved (TR) and angle-resolved (AR) two-photon photoemission (2PPE) spectroscopy. The band dispersions originating from unoccupied electronic states have been identified from the comparison between AR-2PPE spectra and angle-resolved one-photon photoemission spectra with synchrotron radiation. A lifetime of unoccupied surface state has been determined from the TR-2PPE spectra.     

The surface stress of the (1 1 0) and (1 0 0) surfaces of rutile and the effect of water adsorbents

The surface stress on clean TiO₂ (1 1 0) and (1 0 0) surfaces, and those with four types of adsorbent - (i) molecularly adsorbed water, (ii) dissociatively adsorbed water, (iii) dissociatively adsorbed water at an oxygen vacancy, and (iv) adsorbed hydrogen - was investigated in the framework of density functional theory using a slab model. The calculations were intended to rationalize the effect of the artificially introduced stress that occurs in experimentally photoinduced hydrophilicity. Tensile stress was observed for a clean (1 1 0) surface, and a mixture of tensile and compressive stress for a clean (1 0 0) surface. The adsorbate-induced surface stresses were analyzed in terms of the sixfold coordinated character of the surface titanium atoms, hydrogen bonds between the adsorbents and the bridging oxygen atoms, and the change in electron density in the vicinity of the surface.     

Molecular dynamics study on surface structure and surface energy of rutile TiO2 (1 1 0)

The formula for surface energy was modified in accordance with the slab model of molecular dynamics (MDs) simulations, and MD simulations were performed to investigate the relaxed structure and surface energy of perfect and pit rutile TiO₂(1 1 0). Simulation results indicate that the slab with a surface more than four layers away from the fixed layer expresses well the surface characteristics of rutile TiO₂ (1 1 0) surface; and the surface energy of perfect rutile TiO₂ (1 1 0) surface converges to 1.801±0.001 J m⁻². The study on perfect and pit slab models proves the effectiveness of the modified formula for surface energy. Moreover, the surface energy of pit surface is higher than that of perfect surface and exhibits an upper-concave parabolic increase and a step-like increase with increasing the number of units deleted along [0 0 1] and [1 1 0], respectively. Therefore, in order to obtain a higher surface energy, the direction along which atoms are cut out should be chosen in accordance with the pit sizes: [] direction for a small pit size and [0 0 1] direction for a big pit size; or alternatively the odd units of atoms along [1 1 0] direction are removed.     

Structure and composition of the NiPd(1 1 0) surface

The NiPd(1 1 0) alloy surface was studied using low energy electron diffraction to measure the structure and composition of the first three atomic layers. The surface layer is highly enriched in Pd and has a significantly buckled structure. The second layer is also buckled, with displacements even larger than the surface layer. The second layer also exhibits intralayer segregation (chemical ordering), with alternate close-packed rows of atoms being Ni enriched and Pd enriched. The third layer has a structure and composition close to that of the bulk alloy. These results are compared with results for the other low index faces of NiPd, the extensive literature on NiPt alloy surfaces, and the growing body of theoretical literature for NiPd alloy surfaces.