Quasi-one-dimensional structures on the Si(1 1 1) surface induced by Ba adsorption

Ba-induced quasi-one-dimensional reconstructions of the Si(1 1 1) surface have been investigated by low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). While the 3 × ‘2’ surface shows double-periodicity along the stripes in STM images consistent with half-order streaks observed in LEED patterns, no sign of the double-periodicity along the chain direction was detected for the 5 × 1 surface. The 5× stripes in STM images show internal structures with multiple rows. The two rows comprising the boundaries of a 5× stripe in the filled-state STM image are found to have 3a × √3/2 spacing across the stripe. The observation of the successive 3× and 2× spacings between the boundary rows supports a structural model proposed for the Ba-induced 5 × 1 Si reconstruction composed of honeycomb chains and Seiwatz chains. The highest coverage 2 × 8 surface does not reveal a quasi-1D row structure in STM images.     

Irreversible structural transformation of Si(1 1 4)-2 × 1 induced by subsurface carbon

Using scanning tunneling microscopy (STM), it has been found that the reconstruction of Si(1 1 4) is transformed irreversibly from a 2 × 1 structure composed of dimer (D), rebonded atom (R), and tetramer (T) rows (phase A) to a different kind of 2 × 1 structure composed of D, T, and T rows (phase B) by C incorporation. It has been confirmed by high-resolution synchrotron core-level photoemission spectroscopy (PES) that such an irreversible structural transformation is due to stable subsurface C atoms. They induce anisotropic compressive stress on the surface, which results in insertion of Si dimers to an R row to form a T row.     

Structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) reconstructions

We have performed the structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) surfaces in the submonolayer regime utilizing low-energy electron diffraction and scanning tunneling microscopy (STM). The almost identical series of one-dimensional chain structures (e.g., 3 × 2/3 × 1, 5 × 1, 7 × 1, 9 × 1, and 2 × 1 phases) are found in order of increasing metal coverage for both adsorbed systems, however, only the Eu/Si system reveals the ‘√3’-like reconstruction before the 2 × 1 endpoint phase. The atomic models of chain structures are proposed and discussed. In particular, our results suggest the odd-order n×1 (n=5,7,9,…) intermediate reconstructions to incorporate the Seiwatz chains and honeycomb chains with the proportion of m:1, where . The statistical analysis of STM images is carried out to examine the correlation of atomic rows on Eu/Si and Yb/Si surfaces. It is found that Eu stabilizes more ordered row configuration compared to Yb, which can be explained in terms of indirect electronic interaction of atomic chains or/and different magnetic properties of adsorbed species.     

Atomic structure of Bi-dimer row selectively adsorbed on Si(5 5 12)-2 × 1 surface

In order to understand the atomic structure of nanostructures self-assembled on the template with one-dimensional symmetry, Bi/Si(5 5 12) system has been chosen and Bi-adsorption steps have been studied by STM. With Bi adsorption, the clean Si(5 5 12) is transformed to (3 3 7) terraces with disordered boundary due to mismatched periodicities between (3 3 7) and (5 5 12), and Bi-dimer rows are formed inside the (3 3 7) unit as follows: Initially, when Bi atoms are deposited at the adsorption temperature of about 450 °C, they selectively replace Si-dimers and Si-adatoms and form adsorbed Bi-dimers and Bi-adatoms, respectively. If additional Bi is supplied, the Bi-dimers adsorb on the Bi-dimers and Bi-adatoms in the first layer. These adsorbed dimers in the second layer are facing each other to form a Bi-dimer pair with relatively stable p³bonding. Finally, a single Bi-dimer adsorbs above the Bi-dimer pair in the second layer, at which point the Bi layer thickness saturates. It has been concluded that the Bi-dimer pair with stable p³ bonding is the composing element in the second layer and such site-selective adsorption is possible due to the substrate-strain relaxation through inserting Bi-buffer layer limited to specific sites of the substrate.     

Templated growth of quasi-one dimensional molecular structures on Si(1 1 1)-(4 × 1)-In surface

Self-assembly of quasi-one dimensional pentacene molecular chains are realized on Si(1 1 1) surface using the atomic chain structures of the well-defined Si(1 1 1)-(4 × 1)-In surface reconstruction as templates. It is determined that the molecules are adsorbed between two neighboring In chains with their long axis perpendicular to the chain direction. The molecular chains are grown with periodicity commensurate with the lattice constant in the In atomic chains. Our positive results suggest that this approach might be applied to grow organic hetero-nanostructures on specifically decorated semiconductor surfaces.     

Tl/Ge(1 0 0) system: Phase formation and phase transitions

Using scanning tunneling microscopy, phase formation and temperature-driven phase transitions in Tl/Ge(1 0 0) system have been studied. Evolution of Tl overlayer structure has been considered for three temperature ranges, including around room temperature (RT), high-temperature (HT) (350-450 K) and low-temperature (LT) (20-100 K) ranges. Upon RT growth, a 2 × 1-Tl phase develops in submonolayer range and is completed at around 1 ML of Tl. Cooling of the RT-deposited Tl overlayer results in formation of a set of various LT structures. These are 1D chains, 5 × 4-Tl and “stroked” phases observed in submonolayer range and a long-period c(12 × 14)-Tl phase developed at around 1 ML. All transitions between these RT and LT structures are reversible. At doses beyond 1 ML, RT deposition of Tl onto Ge(1 0 0) leads to the growth of second-layer Tl stripes, forming arrays with a 1 × 4 periodicity. Meanwhile, structure of the first layer also changes and it displays a set of various reconstructions, c(2 × 8), c(10 × 6) and c(10 × 7). All these structures remain unchanged upon cooling to LT. Growth at HT as well as heating of RT-deposited Tl overlayer irreversibly produces 3 × 2-Tl phase whose rows become decorated by second-layer Tl stripes at prolonged Tl deposition.     

Electronic structure of the Sb-induced Si(1 1 3)2 × 5 surface

The surface electronic structure of Sb/Si(1 1 3)2 × 5 was investigated by angle-resolved photoemission spectroscopy experiments. This reveals Sb/Si(1 1 3)2 × 5 to have three surface bands with anisotropic two-dimensional characteristics. The band widths of the surface bands along is larger than along . The number of surface bands of Sb/Si(1 1 3)2 × 5 and their band dispersions along and are quite analogous with those of Sb/Si(1 1 3)2 × 2 composed of Sb adatom and Si tetramer chains. The electronic structure analogy suggests that Sb/Si(1 1 3)2 × 5 and Sb/Si(1 1 3)2 × 2 have common building blocks such as Sb adatom and Si tetramer chains.     

An STM study of the Si(0 0 1) (2 × 7)-Gd, Dy surface

Both Gd and Dy induce two different reconstructions of the Si(0 0 1) surface with 2 × 4 and 2 × 7 unit cells. Detailed examination by scanning tunneling microscopy shows that the structure of both phases is essentially the same for both metals. Furthermore, the 2 × 7 unit cell contains structural subunits that are the same as the 2 × 4 structure. The similarities and differences between the two superstructures induced by the two metals are discussed.     

Study of buried Si(1 1 1)-5 × 2-Au by surface X-ray diffraction

The structure of buried Si(1 1 1)-5 × 2-Au capped with amorphous Si was investigated using surface X-ray diffraction. It was found that the 5 × 2 structural periodicity is kept under the amorphous Si from the in-plane measurement. Furthermore, the intensity variation along the fractional-order rod indicates that Au atoms are located almost on the same plane.     

Anomalous hybridization in the In-rich InAs(0 0 1) reconstruction

The surface bonding arrangement in nearly all the confirmed reconstructions of InAs(0 0 1) and GaAs(0 0 1) have only two types of hybridization present. Either the bonds are similar to those in the bulk and the surface atoms are sp³ hybridized or the surface atoms are in a tricoordinated bonding arrangement and are sp² hybridized. However, dicoordinated In atoms with sp hybridization are observed on the InAs(0 0 1), In-rich, room temperature and low temperature surfaces. Scanning tunneling microscopy (STM) images of the room temperature (300 K) InAs(0 0 1) surface reveal that the In-rich surface reconstruction consists of single-atom rows with areas of high electron density that are separated by ∼4.3 Å. The separation in electron density is consistent with rows of undimerized, sp hybridized, In atoms, denoted as the β3′(4 × 2) reconstruction. As the sample is cooled to 77 K, the reconstruction spontaneously changes. STM images of the low temperature surface reveal that the areas of high electron density are no longer separated by ∼4.3 Å but instead by ∼17 Å. In addition, the LEED pattern changes from a (4 × 2) pattern to a (4 × 4) pattern at 77 K. The 77 K reconstruction is consistent with two (4 × 2) subunit cells; one that contains In dimers on the row and another subunit cell that contains undimerized, sp hybridized, In atoms on the row. This combination of dimerized and undimerized subunit cells results in a new unit cell with (4 × 4) periodicity, denoted as the β3(4 × 4) reconstruction. Density functional theory (DFT) and STM simulations were used to confirm the experimental findings.     

Eu- and Yb-induced reconstructions on a vicinal Si(1 0 0) surface

Early stages of rare-earth metal (Yb and Eu) growth on a vicinal, single-domain Si(1 0 0)2 × 1 surface have been studied in the coverage range of 0.1-0.3 monolayer (ML) by low energy electron diffraction, scanning tunneling microscopy, and synchrotron radiation photoemission spectroscopy. We show that Yb induces the 2 × 3 periodicity in the whole range of coverage studied. The 2 × 3 reconstruction coexists with the local 3 × 2/4 × 2 structure at about 0.2 ML of Yb. In contrast, Eu forms the 3 × 2 periodicity at 0.1-0.2 ML, whereas this structure is converted into the 2 × 3 phase at about 0.3 ML. The atomic arrangement and electronic properties of these reconstructions and the adsorbate-mediated modification of surface morphology are investigated.     

Bimodal growth of manganese silicide on Si(1 0 0)

Two different growth modes of manganese silicide are observed on Si(1 0 0) with scanning tunneling microscopy. 1.0 and 1.5 monolayer Mn are deposited at room temperature on the Si(1 0 0)-(2 × 1) substrate. The as-grown Mn film is unstructured. Annealing temperatures between room temperature and 450 °C lead to small unstructured clusters of Mn or Mn_xSi_y. Upon annealing at 450 °C and 480 °C, Mn reacts chemically with the Si substrate and forms silicide islands. The dimer rows of the substrate become visible again. Two distinct island shapes are found and identified as MnSi and Mn₅Si₃.     

Array of double Au-Ag chains on the Si(5 5 7) surface

Using scanning tunneling microscopy we study the topographic properties of Ag structure on the Au induced, highly ordered Si(5 5 7) surface. Topography measurements show that a small amount of Ag (0.25 ML) deposited on that surface leads to considerable modifications of the one-dimensional structure induced by Au atoms. In particular, we observe two different chains on each terrace, which are identified as Si adatoms and Ag chain structures. The STM topography of those chains strongly depends on the bias voltage, indicating an important role of electronic effects in this system.     

Initial stages of the autocatalytic oxidation of the InAs(0 0 1)-(4 × 2)/c(8 × 2) surface by molecular oxygen

The initial stages of oxidation of the In-rich InAs(0 0 1)-(4 × 2)/c(8 × 2) surface by molecular oxygen (O₂) were studied using scanning tunneling microscopy (STM) and density functional theory (DFT). It was shown that the O₂ dissociatively chemisorbs along the rows in the [1 1 0] direction on the InAs surface either by displacing the row-edge As atoms or by inserting between In atoms on the rows. The dissociative chemisorption is consistent with being autocatalytic: there is a high tendency to form oxygen chemisorption sites which grow in length along the rows in the [1 1 0] direction at preexisting oxygen chemisorption sites. The most common site size is about 21-24 Å in length at ∼25% ML coverage, representing 2-3 unit cell lengths in the [1 1 0] direction (the length of ∼5-6 In atoms on the row). The autocatalysis was confirmed by modeling the site distribution as non-Poisson. The autocatalysis and the low sticking probability (∼10⁻⁴) of O₂ on the InAs(0 0 1)-(4 × 2)/c(8 × 2) are consistent with activated dissociative chemisorption. The results show that is it critical to protect the InAs surface from oxygen during subsequent atomic layer deposition (ALD) or molecular beam epitaxy (MBE) oxide growth since oxygen will displace As atoms.     

Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

Vanadium nanoclusters on Si(1 1 1) 7 × 7 surface studied by scanning tunneling microscopy

The size distribution and shape transition of self-assembled vanadium silicide clusters on Si(1 1 1) 7 × 7 have been investigated by scanning tunneling microscopy. Nanoclusters were formed by submonolayer vanadium deposition at room temperature followed by subsequent annealing (solid phase epitaxy - SPE). At room temperature, initially V-nanoclusters are formed which occupy sites avoiding the corner hole parts of the unit cells in the Si(1 1 1) 7 × 7 surface. Upon annealing, strong metal-silicon reaction occur leading to the formation of vanadium silicide nanoclusters. As a function of temperature, both, flat (2D) and three dimensional (3D) clusters have been obtained. After annealing at temperatures around 900 K many faceted clusters are created, whereas at higher annealing temperature, around 1300 K, predominantly 3D clusters are formed. The size distribution of SPE grown clusters could be well controlled in the range of 3-10 nm. The cluster size depends on the annealing temperature as well as on the initial vanadium coverage. Based on high resolution STM images a structure model for one kind of vanadium disilicide clusters exposing atomically flat surfaces was proposed.     

Relaxations in the 1 × 5 reconstruction of Pt(1 1 0)

Pt(1 1 0) is one of the most closely investigated metal surface structures because it displays a variety of “missing-row” reconstructions, which are only marginally stable. The ground state is usually found to have 1 × 2 translational symmetry, but a 1 × 3 form has also been seen. Between 1 × 2 and 1 × 3, a series of disordered structures has been recorded, which shows a slight preference for 1 × 5 periodicity. Under the preparation conditions used in this study, a stable 1 × 5 structure was found for Pt(1 1 0). Investigation by surface X-ray diffraction has led to a complete three-dimensional structure, which closely resembles an alternation of 1 × 2 and 1 × 3 unit cells. Pt(1 1 0) shows an interesting example of two “homometric” structures that are indistinguishable by diffraction, but are distinguishable by virtue of their subsurface relaxation pattern.     

Long range one-dimensional ordering of lead phthalocyanine monolayer on InSb(1 0 0) (4 × 2)/c(8 × 2)

Sub-monolayer and monolayer of lead phthalocyanine deposited on InSb(1 0 0) (4 × 2)/c(8 × 2) surface have been investigated by scanning tunneling microscopy and low energy electron diffraction. Molecules first adsorb on the indium rows of the (4 × 2)/c(8 × 2) structure in the [1 1 0] direction and diffuse at the surface in order to form two-dimensional islands. The molecule-substrate interaction stabilizes the PbPc molecules on the In rows. It weakens the interaction between molecules located in adjacent rows resulting in numerous gliding planes between the molecular chains, in the direction parallel to the rows. At monolayer completion, a long-range one-dimensional order is adopted by the molecules in the [1 1 0] direction.     

Dynamics of copper atoms on Si(1 1 1)-7 × 7 surfaces

This study investigated the dynamics of copper atoms adsorbed on Si(1 1 1)-7 × 7 surfaces between 300 K and 623 K using a variable-temperature scanning tunneling microscope (STM). The diffusion behavior of copper clusters containing up to ∼6 atoms into a particular half unit cell of the 7 × 7 reconstructed Si(1 1 1) surface was considered. The movements and the formation of copper clusters were tracked in detail. The activation energies and pre-exponential factors for various diffusion paths were estimated. Finally, the Cu-etching-Si process and the quasi-5 × 5 incommensurated phase of Cu/Si islands were discussed.     

Au-induced nanofaceting and the stoichiometry of the Si(7 7 5)-Au surface

The Au-induced changes in the surface morphology of a Si(1 1 1) sample miscut 8° towards have been measured using room temperature scanning tunneling microscopy and low energy electron diffraction. Au coverages of less than 0.06 ML up to 0.43 ML have been investigated. In all cases Au adsorption produces dramatic changes in surface morphology. The Au-induced surface exhibits nanofacets with orientations that depend critically on the amount of Au deposited. Below 0.32 ML, the restructured surface always includes (7 7 5)-Au nanofacets suggesting that the (7 7 5)-Au facet is energetically preferred on this surface. The (7 7 5)-Au facet is oriented 8.5° from [1 1 1] towards and is characterized by 1-d chains spaced 21.3 Å apart that run along the direction. By maximizing the surface area of the (7 7 5) facets and optimizing the associated diffraction pattern we determine that the (7 7 5)-Au reconstruction is optimized at 0.24 ML and corresponds to a stoichiometry of 1.5 Au atoms per 1 × 1 unit cell. We believe that the local Au coverage on the (7 7 5) facet is 0.24 ML, and that the deficit/extra of Au at any particular coverage is accommodated by non-(7 7 5) facets. For example at 0.06 ML the regions of step bunching observed on the clean surface are eliminated and Au-induced (7 7 5) and Au-free (1 1 1)7 × 7 facets are already visible. Up to 0.18 ML the non-(7 7 5) facet is Au free. Beyond 0.32 ML, the (7 7 5)-Au reconstruction is no longer stable and the extra Au is accommodated by the formation of higher angle facets with smaller chain spacings.