Ultrasound-assisted microwave preparation of Ag-doped CdS nanoparticles

Ag-doped CdS nanoparticles were synthesized by an ultrasound-assisted microwave synthesis method. The X-ray diffraction patterns reveal a structural evolution from cubic to hexagonal with increasing molar ratios of Ag⁺/Cd²⁺ from 0% to 5%. It shows that the Ag-doped hexagonal CdS nanoparticles are polycrystal. The X-ray photoelectron spectroscopy of the CdS nanoparticles doping with 5% Ag⁺ shows that the doped Ag in CdS is metallic. Simultaneously, the characteristic Raman peaks of the CdS nanoparticles enhance with increasing Ag⁺ concentrations. The photocatalytic activity of different Ag-doped samples show a reasonable change due to different ratios of Ag which doped into CdS.     

Cadmium (II) pyrrolidine dithiocarbamate complex as single source precursor for the preparation of CdS nanocrystals by microwave irradiation and conventional heating process

The complex of cadmium with pyrrolidine dithiocarbamate Cd(pdtc)₂ has been used as single source precursor for the synthesis of CdS nanoparticles. The formation of CdS nanostructures was achieved by thermal decomposition of the complex under microwave irradiation and conventional heating in presence of hexadecylamine. The CdS nanoparticles with disordered close-packed structure were obtained under microwave irradiation, whereas wurtzite hexagonal phase CdS nanorods were obtained by conventional heating method (up to 150 °C). Scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and high resolution transmission electron microscopy (HRTEM) studies also were carried out to study the structure and morphology of nanoparticles. The optical property of the CdS nanoparticles was studied by UV-visible and fluorescence emission spectral studies. Fluorescence measurements on the CdS nanoparticles show a strong emission spectrum with two sub bands that are attributed to band-edge and surface-defect emissions. The reduction of a suitable cadmium metal complex is considered to be one of the single pot methods to generate CdS semiconductor nanoparticles with different shapes and high yield.     

Synthesis and characterization of monodispersed CdS nanoparticles in SiO2 fibers by sol–gel method

Cadmium sulfide (CdS) has been synthesized by a sol–gel route in order to obtain chemically protected, stable nanoparticles. The CdS nanoparticles in the SiO₂ gel matrix were dried to form monoliths of 1 in. diameter. The TEOS:H₂O:HCl:C₂H₅OH and TEOS/Cd mole ratios were varied to obtain narrow size distributed CdS nanoparticles. The UV absorption measurements indicated sharp absorption at 260 and 350 nm for different precursor compositions. SiO₂ gel containing the CdS nanoparticles was spin coated onto substrates in order to monitor the surface morphology of the samples. Scanning electron microscope measurements revealed formation of CdS nanoparticles within the branches of gel-network. Depending upon the mole ratio of additives and drying method, fibers or monolithic tablets of CdS nanoparticles could be produced.     

核壳结构CdS/ZnS纳米微粒的制备与光学特性

用微乳液法制备CdS纳米微粒 ,以ZnS对其进行表面修饰 ,得到具有核壳结构的CdS/ZnS纳米微粒 .采用X射线衍射 (XRD)、透射电镜 (TEM )表征其结构、粒度和形貌 ,紫外 可见吸收光谱 (UV)、光致发光光谱(PL)表征其光学特性 .制得的CdS近似呈球形 ,直径为 3.3nm ;以XRD和UV证实了CdS/ZnS核壳结构的实现 .研究了不同ZnS壳层厚度对CdS纳米微粒光学性能的影响 ,UV谱表明随着壳层厚度的增加纳米微粒的吸收带边有轻微的红移 ,同时短波吸收增强 ;PL谱表明壳层ZnS的包覆可减少CdS纳米微粒的表面缺陷 ,带边直接复合发光的几率增大 ,具有合适的壳层厚度时发光效率大大提高 .     

尺寸相关的CdS纳米颗粒的拉曼散射特性

采用反胶束法,合成了具有不同尺寸的CdS纳米颗粒。利用透射电镜(TEM)和高分辨透射电镜(HR-TEM)以及紫外-可见光吸收谱(UV/vis)对这些纳米颗粒的结构特性进行了表征和分析。利用拉曼光谱仪测量了这些具有不同尺寸的CdS纳米颗粒的拉曼特性。研究结果表明：当纳米颗粒尺寸小于一定值时,拉曼峰出现了蓝移,大于一定值时出现了红移,这些不同的结果是与纳米颗粒的尺寸效应以及纳米颗粒结构中具有各向异性的电子－声子耦合作用有关。     

Synthesis and time-resolved photoluminescence spectroscopy of capped CdS nanocrystals

Here, we report the synthesis of colloidal CdS nanoparticles by capping with starch, phenol and pyridine. We also study the photophysical properties of CdS nanoparticles by steady state and time-resolved photoluminescence spectroscopy. The experimental results show that the relaxation of the excited state of CdS nanoparticles is composed of two different components. Our analysis suggests that the fast and slow components decay times of these capped CdS nanocrystals are due to trapping of carriers in surface state and e–h radiative recombination processes, respectively.     

Investigations of CdS and Ag-CdS nanoparticles by X-ray photoelectron spectroscopy

In the present report, CdS and Ag-CdS nanoparticles were synthesized using cysteine as a capping agent. Surface properties CdS and Ag-CdS nanoparticles were studied by X-ray photoelectron spectroscopy (XPS). XPS study of CdS nanoparticles was carried out as a function of pH and for a refluxed sample at pH 11.2. Effect of dopant concentration on surface properties of Ag-CdS nanoparticles was also studied for as prepared samples as well as for annealed sample at 2% doping. Effect of pH, dopant concentration, and effect of particle size on different sulfur species present in the system was studied. Features of Cd 3d, S 2p and Ag 3d core level have been discussed in detail.     

表面修饰的CdS纳米荧光探针的研究

采用溶胶-凝胶法合成硫脲表面修饰的硫化镉纳米粒子[CdS/SC(NH₂)₂],研究硫脲的用量对其粒径的影响,用X射线粉末衍射、透射电子显微镜,红外光谱以及荧光光谱等手段进行了表征。并研究了小牛胸腺DNA的加入对该纳米粒子荧光光谱的影响。实验结果表明,硫脲的用量对该纳米粒子的粒径大小及发光特性有明显影响,随反应物中硫脲与镉离子的物质的量的比值增加,CdS/SC(NH₂)₂纳米粒子粒径变小,其发射波长蓝移,表现出明显的量子尺寸特性;小牛胸腺DNA的加入使CdS/SC(NH₂)₂纳米粒子的发射光谱强度减弱,实验推测该纳米粒子与小牛胸腺DNA存在静电相互作用, 该研究结果可望用于DNA的分析测定。     

利用Cd(OH)_2选择性包覆与光分解腐蚀缩小CdS纳米微粒的尺寸分布的研究

提出结合Ｃｄ（ＯＨ）２ 选择性包覆与光分解腐蚀法缩小ＣｄＳ纳米微粒的尺寸分布, 并通过对ＣｄＳ纳米微粒发射光谱的研究证实了这一设计思想． 以多聚磷酸钠（ＨＭＰ）为稳定剂合成ＣｄＳ纳米微粒, 再通过Ｃｄ２＋ 与ＯＨ－ 的选择性包覆在大粒径的ＣｄＳ纳米微粒表面形成一层Ｃｄ（ＯＨ）２, 然后溶液置于日光下辐照处理, 数天后, 未经包覆的小粒径ＣｄＳ纳米微粒被日光腐蚀分解, 溶液中只剩下被Ｃｄ（ＯＨ）２ 包覆的大粒径ＣｄＳ纳米微粒, 这样即可达到缩小ＣｄＳ纳米微粒尺寸分布的目的．     

CdS/ZnO纳米复合结构制备及荧光特性研究

为增强CdS纳米粒子的荧光强度,以及稳定性,研究了Cd,S不同质量比,有无稳定剂等条件下CdS纳米粒子的制备及荧光特性。在碱性条件下,利用水热法合成了CdS/ZnO的纳米复合结构,并对所有样品进行了XRD、荧光光谱和SEM表征。测试结果表明所制备的CdS纳米粒子和CdS/ZnO的纳米复合结构粒子成分单一且纯净;ZnO复合在CdS表面;在紫外光(328.5 nm)激发下,CdS/ZnO纳米复合结构的发射峰位于463 nm处,峰形窄而对称,CdS/ZnO纳米复合结构的荧光强度比CdS纳米粒子的荧光强度有显著增强,且CdS和ZnO物质量之比为1∶1条件下,荧光强度最高,其荧光效率比单一CdS纳米粒子高出11%。通过第一性原理计算结果表明,CdS能带结构中,Cd-4d,S-3p和Cd-5s能带分别由5条、3条和1条能级构成,对比不同轨道的分态密度强度,看出CdS的导带边主要由Cd-5s轨道贡献,而价带边主要由S-3p轨道贡献,能量在-7 eV附近的电子态主要由Cd-4d轨道贡献。而ZnO上价带主要由O-2p电子构成,靠近费米能级的价带区域则主要由Zn-3d电子贡献,在导带部分,主要来源于Zn-4s和O-2p电子。由于在两种材料的复合结构中Zn-3d电子的能级和S-3p电子的能级接近,存在着二型带阶结构使能带变窄,容易形成跃迁,减小电子-空穴的复合,从而促进复合结构荧光效率的提高。     

CdS纳米粒子的微波法制备及其光谱特性研究

用微波法以硫代乙酰胺为硫源,成功合成了CdS纳米粒子。透射电子显微镜(TEM）对合成的CdS纳米粒子的表征结果为粒径约12 nm, 粒径分布较为均匀,分散性较好。研究了微波功率、pH值、反应时间等因素对其吸收光谱,荧光光谱和粒径的影响。结果表明,在微波功率为30％、初始反应pH 9.0、微波反应时间为25 min时,可合成质量较高的CdS纳米粒子。比较了以硫代乙酰胺、硫脲和硫化钠为硫源合成的CdS纳米粒子,结果表明,以硫代乙酰胺为硫源合成的CdS纳米粒子荧光带边发射强,缺陷发射弱,荧光性质较好;而以硫脲为硫源合成的CdS纳米粒子荧光边带发射弱;以硫化钠为硫源合成的CdS纳米粒子荧光以缺陷发射为主。铜离子在6.4～512 μg·L-1范围内对该纳米粒子荧光的猝灭呈现良好线性, 可用于痕量铜离子的测定。     

Synthesis and characterization of CdS/PVA nanocomposite films

A series CdS/PVA nanocomposite films with different amount of Cd salt have been prepared by means of the in situ synthesis method via the reaction of Cd²⁺-dispersed poly vinyl-alcohol (PVA) with H₂S. The as-prepared films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, photoluminescence (PL) spectra, Fourier transform infrared spectroscope (FTIR) and thermogravimetric analysis (TGA). The XRD results indicated the formation of CdS nanoparticles with hexagonal phase in the PVA matrix. The primary FTIR spectra of CdS/PVA nanocomposite in different processing stages have been discussed. The vibrational absorption peak of CdS bond at 405 cm⁻¹ was observed, which further testified the generation of CdS nanoparticles. The TGA results showed incorporation of CdS nanoparticles significantly altered the thermal properties of PVA matrix. The photoluminescence and UV-vis spectroscopy revealed that the CdS/PVA films showed quantum confinement effect.     

Growth kinetics and long-term stability of CdS nanoparticles in aqueous solution under ambient conditions

The ubiquity of naturally occurring nanoparticles in the aquatic environment is now widely accepted, but a better understanding of the conditions that promote their formation and persistence is needed. Using cadmium sulfide (CdS) as a model metal sulfide species, thiolate-capped CdS nanoparticles were prepared in the laboratory to evaluate how aquatic conditions influence metal sulfide nanoparticle growth and stability. This work examines CdS nanoparticle growth directly in aqueous solution at room temperature by utilizing the size-dependent spectroscopic properties of semiconductors detectable by UV/vis. CdS nanoparticle growth was governed by oriented attachment, a non-classical mechanism of crystallization in which small precursor nanoparticles coalesce to form larger nanoparticle products. Nanoparticle growth was slowed with increasing capping agent and decreasing ionic strength. In addition to examining the short-term (hours) growth of the nanoparticles, a long-term study was conducted in which cysteine-capped CdS nanoparticles were monitored over 3 weeks in solutions of various ionic strengths. The long-term study revealed an apparent shift from small nanoparticles to nanoparticles twice their original size, suggesting nanoparticle growth may continue through oriented attachment over longer time scales. High-ionic strength solutions resulted in salt-induced aggregation and eventual settling of nanoparticles within days, whereas low-ionic strength solutions were stable against settling over the course of the experiment. Sulfide recovery from cysteine-capped CdS nanoparticles as acid volatile sulfide was nearly quantitative after 2 weeks in fully oxygenated water, demonstrating significantly slowed oxidation of sulfide when complexed to Cd(II) within CdS nanoparticles. The nanoparticles were also shown to be resistant to oxidation by Fe(III) (hydr)oxide. This study illustrates that aggregation, rather than chemical oxidation, is likely more important to the lifetime of many metal sulfide nanoparticles in the aquatic environment.     

Preparation and characterization of polymer-capped CdS nanocrystals

Poly(vinyl pyrrolidone) (PVP)-capped CdS nanoparticles were prepared with CS₂ as the sulfur source through the hydrothermal process. The obtained nanoparticles were characterized by X-ray diffraction, transmission electron microscopic, ultraviolet–visible and fluorescence spectroscopy. The capped CdS nanoparticles showed remarkable stability and significantly enhanced luminescence property compared with that of the noncapped ones. We attributed this observation to the surface passivation of the CdS nanoparticles by the PVP molecules.     

AAO模板法制备CdS纳米微粒的SERS光谱研究

在自制的孔径约15nm多孔氧化铝模板上沉积银纳米粒子,然后用电化学方法在此衬底上沉积CdS纳米微粒。研究了CdS纳米阵列在457.5nm波长激光激发下的表面增强拉曼散射(SERS)性质。实验结果显示CdS的SERS信号有三个振动模式,分别对应1LO、2LO和3LO纵光学声子模,它们的强度随着作为SERS衬底的银纳米粒子高度的增加而增强,当银纳米粒子的长/径比(长度与直径的比值)达到4时,这种增强趋近饱和。最后对CdS纳米微粒光学声子模的增强机理进行了分析和讨论。     

CdS/ZnS core–shell nanoparticles in arachidic acid LB films

Core–shell CdS/ZnS nanoparticles in arachidic acid film were prepared through a novel Langmuir–Blodgett (LB) approach. Post-deposition treatment of the precursor LB multilayers of cadmium arachidate with H₂S gas followed by intercalation of Zn²⁺ ions and further sulfidation result in the formation of CdS/ZnS nanoparticles in the LB film. The formation of these nanoparticles and resulting changes in layered structures were studied by FTIR and X-ray reflection measurements. The optical properties were studied using UV–vis absorption and photoluminescence spectroscopy. A red-shift in the absorption spectrum and enhancement of CdS excitonic emission together with reduction of surface states emission suggest that after the intercalation step, a thin layer of ZnS surrounds the CdS nanoparticles, thus forming a core–shell structure. Subsequent to the second sulfidation, a further red-shift in absorption suggests the formation of a thicker ZnS coating on CdS. Electron diffraction of CdS nanoparticles coated with thicker ZnS showed the diffraction patterns of only ZnS, as expected for core–shell structures.     

CdS/PbS co-sensitized ZnO nanorods and its photovoltaic properties

Nanoparticles co-sensitized nanorods were designed and prepared by assembled CdS and PbS nanoparticles over ZnO nanorods using successive ionic layer adsorption and reaction (SILAR) method. The results showed that the uniform CdS and PdS nanoparticles could be deposited on the lateral and top of the ZnO nanorods when the precursor concentration was 0.05 M and 0.02 M, respectively. Solar cells based on CdS and PbS nanoparticles sensitized ZnO nanorods arrays were assembled successfully. A cell efficiency of 0.38% was obtained in ZnO/CdS/PbS in comparison with ZnO/PbS/CdS mainly due to the stepwise band edge structure constructed in this system except the coverage density of nanoparticles.     

金纳米粒子上CdS纳米半导体材料的制备

利用电极表面组装金纳米粒子为模板,通过循环扫描电化学沉积CdS,在电极表面构筑CdS@Au的核-壳纳米结构。结果表明,在实验条件下所得的CdS均属六方相,但CdS的型貌强烈依赖于电化学沉积扫描电位。金纳米粒子表面的CdS包裹层导致其表面等离子体共振红移,这与金属粒子周围介质折射系数的改变以及粒子内部电荷密度分布的变化密切相关。     

Controlling morphology and structure of nanocrystalline cadmium sulfide (CdS) by tailoring solvothermal processing parameters

Cadmium sulfide (CdS) with different morphologies was successfully prepared by solvothermal process by controlling the processing parameters, including nature of precursor and solvent, reaction temperature and process time. X-ray diffraction patterns revealed that, in all cases highly pure and crystallized CdS with hexagonal structure were obtained. In addition, it was found that the processing parameters influence on preferable growth direction of CdS nanostructures. Field emission scanning electron microscope analysis showed that CdS nanowires with different aspect ratios were obtained (depending upon the reaction temperature and process time) in presence of sulfur powder and ethylenediamine, whereas CdS nanoparticles were produced by sulfur powder and ethanolamine. Moreover, CdS nanorods were prepared using thiourea and ethylenediamine. Transmission electron microscope image confirmed that CdS nanowire with one of the highest aspect ratio reported in the literature (i.e., 255) was achieved using sulfur powder and ethylenediamine at 200 °C reaction temperature for 72 h process time. UV–Vis absorption spectra of CdS nanostructures prepared under different conditions displayed a blue shift relative to that of bulk CdS due to the quantum size effect.     

Photoluminescence and Energy Transfer Study of Eu3+ Codoped with CdS Nanoparticles in Silica Glass

The CdS nanoparticles along with Eu³⁺ ions were embedded in silica xerogel by sol gel technique. The samples were studied by TGA, DTA and fluorescence techniques. The result suggested that doping of CdS nanoparticles enhanced the luminescence properties of Eu³⁺ even in the gel stage itself and this avoids the need of heating gel at higher temperature. The effects of CdS nanoparticles on the Eu³⁺ luminescence were discussed.