Alloy formation in the Au{1 1 1}/Ni system - An investigation with scanning tunnelling microscopy and medium energy ion scattering

Using the techniques of scanning tunnelling microscopy (STM) and medium energy ion scattering (MEIS), we examine the growth and annealing behaviour of ultrathin Ni films on Au{1 1 1} at 300 K. As has been shown previously, submonolayer growth of Ni on Au{1 1 1} is strongly influenced by the presence of the herringbone reconstruction with two-dimensional clusters nucleating at herringbone elbows. Second layer growth commences prior to the completion of the monolayer. After multiple layers have been deposited, the surface morphology retains a similar cluster-like appearance. Annealing produces surfaces exhibiting long range Moiré structures and, at higher temperature, triangular misfit dislocations. We use MEIS to examine the composition and structure of these surface alloy phases and conclude that in each case, they consist of an essentially pure Au surface layer on a bimetallic second layer.     

Herringbone and triangular patterns of dislocations in Ag, Au, and AgAu alloy films on Ru(0 0 0 1)

We have studied the dislocation structures that occur in films of Ag, Au, and Ag_0.5Au_0.5 alloy on a Ru(0 0 0 1) substrate. Monolayer (ML) films form herringbone phases while films two or more layers thick contain triangular patterns of dislocations. We use scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED) to determine how the film composition affects the structure and periodicity of these ordered structures. One layer of Ag forms two different herringbone phases depending on the exact Ag coverage and temperature. Low-energy electron microscopy (LEEM) establishes that a reversible, first-order phase transition occurs between these two phases at a certain temperature. We critically compare our 1 ML Ag structures to conflicting results from an X-ray scattering study [H. Zajonz et al., Phys. Rev. B 67 (2003) 155417]. Unlike Ag, the herringbone phases of Au and AgAu alloy are independent of the exact film coverage. For two layer films in all three systems, none of the dislocations in the triangular networks thread into the second film layer. In all three systems, the in-plane atomic spacing of the second film layer is nearly the same as in the bulk. Film composition does, however, affect the details of the two layer structures. Ag and Au films form interconnected networks of dislocations, which we refer to as “trigons.” In 2 ML AgAu alloy, the dislocations form a different triangular network that shares features of both trigon and moiré structures. Yet another well-ordered structure, with square symmetry, forms at the boundaries of translational trigon domains in 2 ML Ag films but not in Au films.     

Electrochemical Au deposition on stepped Si(1 1 1)-H surfaces: 3D versus 2D growth studied by AFM and X-ray diffraction

In order to grow magnetic layers on silicon substrates, a non-magnetic buffer layer is often needed to avoid silicide formation and to reproduce the perpendicular magnetic anisotropy obtained on metal single crystals, as in the case of Co on Au(1 1 1) and Pt(1 1 1). In this context, we have studied the electrochemical growth of Au buffer layers, and show that it is possible to obtain different film morphologies on hydrogen-terminated vicinal Si(1 1 1) surfaces by varying the electrochemical deposition parameters and solution composition. Two different morphologies have been obtained as observed by atomic force microscopy: continuous 2D Au films (chloride solution at pH 4), and films consisting in flat top 3D Au islands decorating the Si(1 1 1) step edges (cyanide solution at pH 14). X-ray diffraction measurements reveal that the gold layer and islands have Au(1 1 1) orientation and are in epitaxy with the Si(1 1 1) surface. In the case of islands, the lateral facets have also Au(1 1 1) orientation. Results are discussed within a model in which the breaking of the Si-H surface bonds plays a major role in the Au nucleation and growth mechanisms.     

Ag nanostructures on Au(7 8 8): A self-assembled superlattice of metallic quantum resonators

We have studied by scanning tunneling microscopy (STM) the effect of the reconstruction of a stepped Au(1 1 1) surface on the growth of silver sub-monolayer deposition. For narrow terraces, the reconstruction is disturbed and its pattern changes, Ag growth is therefore influenced. Thus growth of Ag on Au(7 8 8) vicinal surface can be controlled and leads to the formation of a highly ordered superlattice of nanostructures. Moreover, we show by tunneling conductance images that Ag islands exhibit electronic confinement effects of the Shockley surface state. Due to the homogeneity of their shapes and sizes, all the nanostructures of the self-assembled superlattice should exhibit similar electronic properties.     

The adsorption of iron phthalocyanine on graphite: A scanning tunnelling microscopy study

Different adsorption phases of iron phthalocyanine (FePc) on highly oriented pyrolitic graphite (HOPG) have been characterized by scanning tunnelling microscopy (STM). Evaporation of FePc onto the graphite (0 0 0 1) surface, kept at room temperature, results in the formation of three-dimensional molecular islands.After annealing to 400 °C different two-dimensional features are identified, depending on the initial coverage. At low doses, domains with well defined boundaries have been observed, within which molecules tend to organise in chains. At higher coverage, islands exhibiting well-ordered densely-packed square or hexagonal molecular arrangement have been resolved. For the adsorption structures corresponding to one monolayer islands our results show that the molecules adsorb with the molecular plane parallel to the surface. The high resolution STM images allow us to resolve the orientation of single molecules and subsequently we suggest that the molecular monolayer is stabilized by van der Waals interactions. The characterization of the observed Moiré contrast and a comparison with other similar systems underlines the importance of the central metal in the molecule-molecule and molecule-substrate interactions, which govern the molecular adsorption geometry.     

NaCl islands decorated with 2D or 3D 3,4,9,10-perylene-tetracarboxylic-dianhydride nanostructures

The formation of PTCDA (3,4,9,10-perylene-tetracarboxylic-dianhydride) nanostrutures on Au(1 1 1)-() covered with NaCl islands has been studied using scanning tunneling microscopy (STM). Atomically resolved STM images show that NaCl grows as (1 0 0)-terminated layers on Au(1 1 1)-(). Local atomic hexagonal packing has also been observed in the NaCl(1 0 0) layer. At submonolayer NaCl coverage, PTCDA forms two-dimensional islands on the Au(1 1 1) surface and nucleate preferentially at the NaCl island step edges. When the Au surface is fully covered with NaCl layers, PTCDA molecules form three-dimensional molecular clusters decorating the step edges of NaCl layers.     

Scanning tunneling microscopy study on a BC3 covered NbB2(0 0 0 1) surface

We have investigated a BC₃ covered NbB₂(0 0 0 1) surface using scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), and low energy electron diffraction (LEED). The STM images reveal characteristic features of a Moiré pattern reflecting an incommensurate relation of the BC₃ sheet with the substrate: bright protrusions with the periodicity of the substrate lattice are modulated in intensity with the periodicity of the BC₃ lattice. As a result, the surface exhibits nm-scale patchy regions with either the √3 × √3 or the 1 × 1 structure of the substrate. The two-dimensional Fourier transformation pattern of the STM image is consistent with the LEED pattern proving the epitaxial and incommensurate relationship between BC₃ surface sheet and substrate. No feature of a predicted superconducting gap was found in STS spectra measured at 5 K.     

The epitaxial growth of Pd electrodeposition on Au(1 0 0) studied by LEED and RHEED

The epitaxial growth of Pd adlayers electrochemically deposited onto Au(1 0 0) has been studied by LEED, RHEED and AES. For the first 6 ML, the Pd deposits grow pseudomorphically on Au(1 0 0) with a lateral expansion of 4.5% with respect to bulk Pd. The strain in the expanded commensurate (1 × 1) Pd layers on Au(1 0 0) begins to be relieved at the Pd coverage between 6 and 9 ML range by formation of a compressed Pd film with respect to Au(1 0 0) surface and the compression increases continuously with thickness. At ca. 20 ML Pd the lattice constant of the film approaches to the bulk Pd and three-dimensional Pd islands develop since around 30 ML coverage. No superstructure due to the Pd-Au surface alloy can be found for coverages from monolayer up to 30 ML Pd on Au(1 0 0). A c(2 × 2) phase has been observed on the Pd-deposited Au(1 0 0) electrodes, which is ascribed to an ordered Cl adlayers adsorbed on Pd adlayers rather than a Pd-Au surface alloy.     

Preparation,characterization and magneto-optical investigations of electrodeposited Co/Au films

Au/Co(4–8 ML)/Au single magnetic layers and Au(8 ML)/Co(4 ML)/Au(8 ML)/Co(8 ML)/Au bilayer were sequentially grown by electrodeposition on an Au(1 1 1) buffer layer electrodeposited on Si(1 1 1). The technique used in this work provides full control on the structure and the chemical composition of the different layers (no alloying) as well as on the chemistry at interfaces. scanning tunneling microscopy (STM) and atomic force microscopy (AFM) imaging and X-ray diffraction measurements show that atomically flat continuous Co(0 0 0 1) layers (4–8 ML) can be grown in epitaxy with the Au(1 1 1) substrate and that the 2 nm-thick spacer is also a continuous Au(1 1 1) layer. The Co ultrathin layers (4 and 8 ML) exhibit perpendicular magnetic anisotropy. The lateral magnetic homogeneity and magnetization reversal process have been investigated by scanning magneto-optical Kerr effect (MOKE) magnetometry and global Kerr microscopy. The correlation between magnetization switching behaviour in each layer of the Co-bilayer stack has been evidenced from in-depth sensitive MOKE measurements and microscopy. The strong coupling observed between the two Co layers is attributed to magnetostatic interaction at domain wall boundaries.     

Growth of Pt thin films on WSe2

The morphology and structure of Pt deposited on a WSe₂(0 0 0 1) van der Waals surface have been investigated by reflection high energy electron diffraction and scanning tunneling microscopy. At room temperature, the initial growth is characterized by the formation of three-dimensional fcc Pt islands with (1 1 1) orientation. In contrast, at higher temperatures of about 450 °C the formation of a novel chemically ordered Pt-Se alloy is observed. Based on the diffraction patterns, a tetragonal DO₂₂-type structure of a Pt₃Se compound is suggested. With increasing Pt thickness, this chemically ordered alloy disappears and an additional superstructure occurs, which is accompanied by the coalescence of the islands. The observed superstructure is attributed to a strong Se diffusion towards the growth surface, forming most likely a PtSe₂ alloy with the CdI₂-type layered structure on the top surface. Due to the lateral lattice mismatch between the Pt(1 1 1) layers and the PtSe₂(1 1 1) top layer, a Moiré pattern with a period of 1.1 nm is created, which might be used as a long-range atomic pattern for further nanostructure growth.     

Growth and thermal stability of ultra-thin Ag and Au layers on Mo(1 1 1) surface

The influence of temperature on the growth process of ultra-thin Ag and Au layers on the Mo(1 1 1) surface was investigated. At 300 K growth of the Stranski-Krastanov type was found for Ag; for Au growth of the monolayer plus simultaneous multilayers type was found, where a base layer is one physical layer. The first three geometrical adsorbed layers for Ag are thermally stable. For annealed Au layers triangle features with base side length from 15 to 35 Å were formed for θ < 6 monolayer (ML), and for θ > 6 ML part of the Au formed a flat adlayer with Au atoms grouped in equilateral triangles with side length 7 Å. The presence of Au layers does not cause faceting, layers are not smooth which could be caused by the fact that Au does not wets the substrate. For Ag thick layers reversible wetting/non-wetting transition was observed at 600 K. Ag layers on Mo(1 1 1) surface did not lead to faceting.     

Electronic properties of Au nano-particles supported on stoichiometric and reduced TiO2(1 1 0) substrates

Growth modes and electronic properties were analyzed for Au nano-particles grown on stoichiometric and reduced TiO₂(1 1 0) substrates by medium energy ion scattering (MEIS) and photoelectron spectroscopy(PES) using synchrotron-radiation-light. Initially, two-dimensional islands (2D) with a height of one and two atomic layers grow and higher coverage increases the islands height to form three-dimensional (3D) islands for the stoichiometric TiO₂(1 1 0) substrate. In contrast, 3D islands start to grow from initial stage with a small Au coverage (?0.1 ML, 1 ML = 1.39 × 10¹⁵  atoms/cm²: Au(1 1 1)) probably due to O-vacancies acting as a nucleation site. Above 0.7 ML, all the islands become 3D ones taking a shape of a partial sphere and the Au clusters change to metal for both substrates. We observed the Au 4f and Ti 3p core level shifts together with the valence band spectra. The Ti 3p peak for the O-deficient surface shifts to higher binding energy by 0.25 ± 0.05 eV compared to that for the stoichiometric surface, indicating downward band bending by an electron charge transfer from an O-vacancy induced surface state band to n-type TiO₂ substrate. Higher binding energy shifts of Au 4f peaks observed for both substrates reveal an electron charge transfer from Au to TiO₂ substrates. The work functions of Au nano-particles supported on the stoichiometric and reduced TiO₂ substrates were also determined as a function of Au coverage and explained clearly by the above surface and interface dipoles.     

Molecular beam epitaxy of organic films investigated by high resolution low energy electron diffraction (SPA-LEED): 3,4,9,10-perylenetetracarboxylicacid-dianhydride (PTCDA) on Ag(1 1 1)

A detailed investigation of the multilayer growth of PTCDA on Ag(1 1 1) by high resolution LEED (SPA-LEED) is reported. The first two monolayers are closed and exhibit a structure, which is commensurate with respect to the underlying Ag(1 1 1) surface. The lattice parameters are close to those of the (1 0 2) plane of the β bulk phase of PTCDA, with deviations ?2%. The vertical stacking of the second layer with respect to the first monolayer (observed at 300 K) corresponds to that in the β bulk phase of PTCDA. At high growth temperatures (400 K), Stranski-Krastanov growth occurs from the third monolayer onward, and PTCDA clusters, preferentially with few well defined facets, grow. The structure of the clusters is that of the thermodynamically more stable α bulk phase of PTCDA. Contrary, at low growth temperatures (200 K), the growth proceeds in the Frank van der Merve mode, with several open layers. From slope selection there is evidence for an Ehrlich-Schwoebel barrier. The lateral packing of the PTCDA grown at low temperatures corresponds within error to that of the β bulk phase. The low temperature structure and morphology is meta-stable. Short annealing at 300 K flattens the PTCDA film, and prolonged annealing at 400 K causes the film to adapt the structure and morphology obtained directly at 400 K growth temperature. Presumably, the formation of layers with a β-phase-like lattice at low temperature is due to the better fit of the β phase, compared to the α phase lattice, to the underlying commensurate monolayer. However, at high growth temperatures, the thermodynamically more stable α phase grows, reducing the area of lattice misfit to the underlying commensurate first two layers by formation of clusters.     

Au island growth on a Si(1 1 1) vicinal surface

Au island nucleation and growth on a Si(1 1 1) 7 × 7 vicinal surface was studied by means of scanning tunneling microscopy. The surface was prepared to have a regular array of step bunches. Growth temperature and Au coverage were varied in the 255-430 °C substrate temperature range and from 1 to 7 monolayers, respectively. Two kinds of islands are observed on the surface: Au-Si reconstructed islands on the terraces and three-dimensional (3D) islands along the step bunches. Focusing on the latter, the dependence of island density, size and position on substrate temperature and on Au coverage is investigated. At 340 °C and above, hemispherical 3D islands nucleate systematically on the step edges.     

Nanogroove formation during homoepitaxial Au electrodeposition on reconstructed Au( 1 1 1)

In situ scanning tunneling microscopy (STM) studies of homoepitaxial electrodeposition on Au(1 1 1) from hydrochloric acid solution reveal an unusual deposit morphology in the potential regime of the Au surface reconstruction, where the deposited Au islands are separated by nanoscale grooves with preferred widths of 6 and 12 nm. The formation of these structures is attributed to a hindered coalescence of the islands, caused by elastic energy contributions of the reconstructed bottom of the grooves.     

Epitaxial structures of self-organized, standing-up pentacene thin films studied by LEEM and STM

Growth of pentacene (Pn) thin films has been studied in situ by means of low-energy electron microscopy (LEEM) and scanning tunneling microscopy (STM). A very low nucleation density of Pn grains has been observed on Bi(0 0 0 1)/Si(1 1 1) template, resulting in formation of large, monolayer-high Pn grains with diameter exceeding several hundreds of micrometers. We determined that formation of self-organized, standing-up Pn epitaxial layers was stabilized by a weak interaction between the substrate and Pn molecules and by the presence of the commensurate structure between the oblique Pn lattice and trigonal substrate surface lattice. The ‘point-on-line’ commensurability has been found along a-axis of Pn and one of the primitive vectors of substrate surface lattice. Strong ‘point-on-line’ commensurability in Pn/Bi(0 0 0 1)/Si(1 1 1) system resulted in a bulk-like epitaxial thin film growth, starting from the first layer. The presence of twins, often having a mirror line parallel to the direction of the ‘point-on-line’ matching, has been also detected using an asymmetric dark-field imaging mode in LEEM experiments, which, we believe, is the first LEEM demonstration of molecular tilt imaging.     

Co-induced nano-structures on Si(1 1 1) surface

The interaction of cobalt atoms with silicon (1 1 1) surface has been investigated by means of scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED). Besides the Co silicide islands, we have successfully distinguished two inequivalent Co-induced reconstructions on Si(1 1 1) surface. Our high-resolution STM images provide some structural properties of the two different derived phases. Both of the two phases seem to form islands with single domain. The new findings will help us to understand the early stage of Co silicide formations.     

Crystallization and surface morphology of Au/SiO2 thin films following furnace and flame annealing

A crystallization and surface evolution study of Au thin film on SiO₂ substrates following annealing at different temperatures above the eutectic point of the Au/Si system are reported. Samples were prepared by conventional evaporation of gold in a high vacuum (10⁻⁷ mbar) environment on substrates at room temperature. Thermal treatments were performed by both furnace and flame annealing techniques. Au thin films can be crystallized on SiO₂ substrates by both furnace and flame annealing. Annealing arranges the Au crystallites in the (1 1 1) plane direction and changes the morphology of the surface. Both, slow and rapid annealing result in a good background in the XRD spectra and hence clean and complete crystallization which depends more on the temperature than on the time of annealing. The epitaxial temperature for the Au/SiO₂ system decreases in the range of 350-400 °C. Furnace and flame annealing also form crystallized gold islands over the Au/SiO₂ surface. Relaxation at high temperatures of the strained Au layer, obtained after deposition, should be responsible for the initial stages of clusters formation. Gold nucleation sites may be formed at disordered points on the surface and they become islands when the temperature and time of annealing are increased. The growth rate of crystallites is highest around 360 °C. Above this temperature, the layer melts and gold diffuses from the substrate to the nucleation sites to increase the distance between islands and modify their shapes. Well above the eutectic temperature, the relaxed islands have hexagonally shaped borders. The mean crystallite diameters grow up to a maximum mean size of around 90 nm. The free activation energy for grain boundary migration above 360 °C is 0.2 eV. Therefore the type of the silicon substrate changes the mechanism of diffusion and growth of crystallites during annealing of the Au/Si system. Epitaxial Au(1 1 1) layers without formation of islands can be prepared by furnace annealing in the range of 300-310 °C and by flame annealing of a few seconds and up to 0.5 min.     

STM study of the initial stages of C60 adsorption on the Pt(1 1 0)-(1 × 2) surface

We have studied the initial stages of adsorption of C₆₀ on the Pt (1 1 0)-(1 × 2) surface by means of STM. At room temperature, fullerene molecules adsorb in the troughs between two adjacent Pt rows of the missing row reconstruction. Mobility over the terraces is negligible, denoting strong bonding with the surface, also testified by a well-defined orientation of fullerene monomers with respect to the substrate. Upon annealing at 750 K, molecular migration towards kinks and step edges occurs, where small islands nucleation begins. A commensurate registry with the substrate is maintained by small (5-10 molecules) C₆₀ aggregates, leading to expanded nearest-neighbour distances with respect to those found in hexagonal close packed fullerene ad-islands grown on other metallic substrates.     

A novel method for elimination of the gold-islands formed in the self-assembled monolayers of benzeneselenol on Au(1 1 1) surface

Molecular ordering of benzeneselenol (BSe) self-assembled monolayers (SAMs) on Au(1 1 1) substrates have been investigated by scanning tunnelling microscopy (STM) [1]. After short immersion time (10 min), elevated islands with height of 2.4 Å were found to cover the entire gold surface. On and among the islands, the STM results exhibited the formation of a highly ordered phase (α-phase) by BSe species. In the present study, a novel method is presented to completely eradicate the elevated gold-islands. The method depends on a repetitive STM scanning over the same part of the SAM at restricted tunnelling conditions. After almost 6 h of successive scanning, the surface becomes clean and free of the elevated islands. Moreover, this method was found to induce phase transformation into β-phase. The size of the ordered domains of the β-phase was found to exceed five times that of α-phase. Such a long-range ordering of the β-phase at room temperature has not been previously observed for any system on Au(1 1 1). After detailed analyses, the β-phase was found to have a 33.5% of lower packing density than that of α-phase.