XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

同步辐射光激励的二氧化硅薄膜刻蚀研究

利用热氧化法在硅晶片上生长SiO₂薄膜，结合光刻和磁控溅射技术在SiO₂薄膜表面制备接触型钴掩模，通过掩模方法在硅表面开展了同步辐射光激励的表面刻蚀研究，在室温下制备了SiO₂薄膜的刻蚀图样.实验结果表明：在同步辐射光照射下，通入SF₆气体可以有效地对SiO₂薄膜进行各向异性刻蚀，并在一定的气压范围内，刻蚀率随SF₆气体浓度的增加而增加，随样品温度的下降而升高；如果在同步辐射光照射下，用SF₆和O₂的混合气体作为反应气体，刻蚀过程将停止在SiO₂/Si界面，即不对硅刻蚀，实现了同步辐射对硅和二氧化硅两种材料的选择性刻蚀；另外，钴表现出强的抗刻蚀能力，是一种理想的同步辐射光掩模材料. 关键词： 同步辐射刻蚀 接触型钴掩模 二氧化硅薄膜     

Novel catalysts: Indium implanted SiO2 thin films

Interactions of Indium (In) and silicon (Si) atoms are known to catalyze certain organic chemical reactions with high efficiency. In an attempt of creating a material that manifests the interactions, In implanted SiO₂ thin films were prepared by ion beam injection and their catalytic abilities for organic chemical reactions were examined. It has been found that, with an injection energy of approximately 0.5 keV, a thin In film is formed on a SiO₂ substrate surface and the In implanted SiO₂ thin film can catalyze an organic chemical reaction. It has been also shown that there is an optimal ion dose for the highest catalytic ability in the film preparation process. Thin-film-type catalyzing materials such as the one proposed here may open a new way to enhance surface chemical reaction rates.     

Enhanced nonlinear optical absorption of Au/SiO2 nano-composite thin films

Nano metal-particle dispersed glasses are the attractive candidates for nonlinear optical material applications.Au/SiO 2 nano-composite thin films with 3 vol% to 65 vol% Au are prepared by inductively coupled plasma sputtering.Au particles as perfect spheres with diameters between 10 nm and 30 nm are uniformly dispersed in the SiO 2 matrix.Optical absorption peaks due to the surface plasmon resonance of Au particles are observed.The absorption property is enhanced with the increase of Au content,showing a maximum value in the films with 37 vol% Au.The absorption curves of the Au/SiO 2 thin films with 3 vol% to 37 vol% Au accord well with the theoretical optical absorption spectra obtained from Mie resonance theory.Increasing Au content over 37 vol% results in the partial connection of Au particles,whereby the intensity of the absorption peak is weakened and ultimately replaced by the optical absorption of the bulk.The band gap decreases with Au content increasing from 3 vol% to 37 vol % but increases as Au content further increases.     

Electroluminescence from Si／SiO2 films deposited on p—Si substrates

The structure of Au/Si/SiO₂/p-Si has been fabricated using the magnetron sputtering technique. It has a very good rectifying behaviour. Visible electroluminescence (EL) has been observed from the Au/Si/SiO₂/p-Si structure at a forward bias of 5V or larger. A broad band with one peak around 650－660 nm appears in all the EL spectra of the structure. The effects of the thickness of the Si layer in the Si/SiO₂ films and of the input electrical power on EL spectra are studied systematically.     

Chemical bath deposition of hausmannite Mn3O4 thin films

A low-temperature chemical bath deposition (CBD) technique has been used for the preparation of Mn₃O₄ thin films onto glass substrates. The kinetic behavior and the formation mechanism of the solid thin films from the aqueous solution have been investigated. Structure (X-ray diffraction and Raman), morphological (atom force microscope), and optical (UV-vis-NIR) characterizations of the deposited films are presented. The results indicated that the deposited Mn₃O₄ thin films of smooth surface with nanosized grains were well crystalline and the optical bandgap of the film was estimated to be 2.54 eV.     

CuInS2 thin films obtained through the annealing of chemically deposited In2S3-CuS thin films

In this work, we report the formation of CuInS₂ thin films on glass substrates by heating chemically deposited multilayers of copper sulfide (CuS) and indium sulfide (In₂S₃) at 300 and 350 °C in nitrogen atmosphere at 10 Torr. CIS thin films were prepared by varying the CuS layer thickness in the multilayers with indium sulfide. The XRD analysis showed that the crystallographic structure of the CuInS₂ (JCPDS 27-0159) is present on the deposited films. From the optical analysis it was estimated the band gap value for the CIS film (1.49 eV). The electrical conductivity varies from 3 × 10⁻⁸ to 3 Ω⁻¹ cm⁻¹ depending on the thickness of the CuS film. CIS films showed p-type conductivity.     

Synthesis and properties of silicon dioxide films prepared by pulsed laser deposition using ceramic SiO2 target

Silicon dioxide (SiO₂) thin films were deposited on BK7 substrates by pulsed laser deposition (PLD) method using ceramic SiO₂ targets (C-SiO₂-Ts), which was sintered by solid state sintering. The reason for using C-SiO₂-T instead of the silicon target is to reduce the oxygen-deficiency phenomenon in deposited SiO₂ thin films. The influence of substrate-temperatures, oxygen-pressures and oxygen-plasma-assistance on the properties of synthesized films was studied. X-ray diffraction, atomic force microscopy, ultraviolet–visible–near-infrared scanning spectrophotometry were used to characterize the crystallinity, morphology and optical properties of deposited films. Results show that the root-mean-square roughness of films increased with the increase of oxygen-pressure, substrate-temperature and with the employment of oxygen-plasma. The transmittance of films increased with the increase of oxygen-pressure and decreased with the increase of substrate-temperature and with the employment of oxygen-plasma. Stoichiometric SiO₂ thin film with high optical quality was synthesized at room-temperature and 20 Pa oxygen-pressure using C-SiO₂-T.     

MgB2 超薄膜的制备和性质研究

利用混合物理化学气相沉积法在6H-SiC(001)衬底上制备干净的MgB₂超导超薄膜.在本底气体压强、载气氢气流量等条件一定的情况下,改变B₂H₆流量及沉积时间,制备得到不同厚度的系列MgB₂超薄膜样品,并研究了超导转变温度T_c、剩余电阻率ρ_(42K)、上临界磁场H_c2等与膜厚的关系.该系列超薄膜沿c轴外延生长,随膜厚度的变小,T_c(0)降低,ρ_(42K)升高.膜在衬底上的生长遵循Volmer-Weber岛状生长模式.对于厚度为7.5 nm的MgB₂超薄膜,T_c(0) =32.8 K,ρ_(42K) =118 μΩcm,是迄今为止所观测到的厚度为7.5 nm的MgB₂超薄膜最高的T_c值;对于厚度为10 nm的MgB₂膜,T_c(0)=35.5 K,ρ_(42K)=17.7 μΩcm,上临界磁场μ₀H_c2估算为12 T左右,零磁场、4 K时的临界电流密度J_c=1.0×10⁷ A/cm²,是迄今为止10 nm厚MgB₂超薄膜的最高J_c值,且其表面连接性良好,均方根粗糙度为0.731 nm.这预示MgB₂超薄膜在超导纳米器件上具有广阔的应用前景. 关键词： 2超薄膜')" href="#">MgB₂超薄膜 薄膜生长 氢气流量 混合物理化学气相沉积     

Influence of patterning on the nucleation of Ge islands on Si and SiO2 surfaces

Surface patterning is expected to influence the nucleation site of deposited nanostructures. In the present study, clean Si and SiO₂ surfaces were patterned by a nanolithographic process using a Focused Ion Beam (FIB). Ge was evaporated in ultra high vacuum at 873 K on these substrates, resulting in the formation of island arrays. Based on scanning tunneling microscopy and atomic force microscopy images, a statistical analysis was performed in order to highlight the effect of patterning on the size distribution of islands compared to a non-patterned surface. We find that the self-organization mechanism on patterned substrates results in a very good arrangement and positioning of Ge nanostructures, depending on growth conditions and holes distance, both on Si and SiO₂ surfaces.     

Ag-Au合金/SiO$lt;sub$gt;2$lt;/sub$gt;复合薄膜的制备与表征

以AgNO₃,HAuCl₄和正硅酸乙酯为主要原料,利用溶胶-凝胶法和旋涂技术,通过热处理和紫外光辐射还原得到了不同n_Ag/n_Au（1∶0,2∶1,1∶2,0∶1）的Ag-Au合金/SiO₂复合薄膜.从扫描电子显微镜和X射线衍射谱的结果可以看出得到的薄膜均匀性好,复合薄膜中合金颗粒的尺寸为10 nm左右.利用紫外-可见分光光谱仪研究了复合薄膜的光吸收性能,结果表明,随着n_Ag/n_Au的降低,吸收峰的位置也由最初的Ag纳米粒子的等离子共振吸收峰430 nm附近,逐渐红移到Au纳米粒子的等离子共振吸收峰605和880 nm附近.从光吸收谱可以看出,n_Ag∶n_Au＝2∶1和1∶2的两个样品分别在515,730 nm附近和550,730 nm附近出现表面等离子共振吸收峰.这表明Au-Ag合金固溶体的形成. 关键词： 2')" href="#">Ag-Au合金/SiO₂ 紫外辐射 光吸收性能     

Oblique angle deposition of TiO2 thin films prepared by electron-beam evaporation

Optical, structural and photocatalytic properties of TiO₂ thin films obliquely deposited on quartz glass substrate using an electron-beam evaporation method were investigated. The photocatalytic activity of the films was evaluated by photodecomposition of methylene blue. An increase in incident deposition angle increased the porosity and surface roughness of the TiO₂ films. As a result, the photocatalytic activity was enhanced with incident deposition angle up to 60°. However, a further increase in incident deposition angle to 75° reduced the photocatalytic activity due to a lack of the crystalline phase.     

Study on morphology and photoluminescence of Au/SiO2 nanocomposite films

Au/SiO₂ nanocomposite films were fabricated on Si (111) substrates by radio frequency (RF) magnetron sputtering technique and annealing at different temperature for 20 min (mode A) and at 1000 °C for different annealing time (mode B). The nanocomposite films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and photoluminescence (PL). SEM results demonstrate that the size of Au crystallites in mode A first increases and then decreases, on increasing annealing temperature, according to the results of XRD spectra. Analysis of PL spectra in mode B shows that the intensity of the emission peak at 440 nm and 523 nm early increases and late decreases, with increasing annealing time at 1000 °C. The origin of the emission peak at around 440 nm was related to the size and quantity of Au particles and one of the emission peak at around 523 nm was related to the nanostructure of films in agreement with SEM imagines. Experimental results indicated that morphology, microstructure and luminescence of Au/SiO₂ nanocomposite films showed close affinity with annealing temperature and annealing time.     

Electron beam-physical vapor deposition of SiC/SiO2 high emissivity thin film

When heated by high-energy electron beam (EB), SiC can decompose into C and Si vapor. Subsequently, Si vapor reacts with metal oxide thin film on substrate surface and formats dense SiO₂ thin film at high substrate temperature. By means of the two reactions, SiC/SiO₂ composite thin film was prepared on the pre-oxidized 316 stainless steel (SS) substrate by electron beam-physical vapor deposition (EB-PVD) only using β-SiC target at 1000 °C. The thin film was examined by energy dispersive spectroscopy (EDS), grazing incidence X-ray asymmetry diffraction (GIAXD), scanning electron microscopy (SEM), atomic force microscopy (AFM), backscattered electron image (BSE), electron probe microanalysis (EPMA), X-ray photoelectron spectroscopy (XPS) and Fourier transformed infra-red (FT-IR) spectroscopy. The analysis results show that the thin film is mainly composed of imperfect nano-crystalline phases of 3C-SiC and SiO₂, especially, SiO₂ phase is nearly amorphous. Moreover, the smooth and dense thin film surface consists of nano-sized particles, and the interface between SiC/SiO₂ composite thin film and SS substrate is perfect. At last, the emissivity of SS substrate is improved by the SiC/SiO₂ composite thin film.     

Fabrication and characterization of Au/SiO2 nanocomposite films grown by radio-frequency cosputtering

Au/SiO₂ nanocomposite films were prepared on Si wafers by cosputtering of SiO₂ and gold wires. Au/Si atomic ratios in Au/SiO₂ nanocomposite films were varied from 0.53 to 0.92 by controlling the length of gold wire to study the evolution of the crystallization of gold, the size of Au/SiO₂ nanocomposite particles, and the optical properties of as-deposited Au/SiO₂ nanocomposite films. An X-ray photoelectron spectroscopy reveals that Au exists as a metallic phase in the bulk of SiO₂ matrix. Dome-shaped Au/SiO₂ nanocomposite particles and both Au (1 1 1) and (2 0 0) planes were observed in a field-emission scanning electron microscopy and X-ray diffraction studies respectively. With an ultraviolet-visible, absorption peaks of Au/SiO₂ nanocomposite films were observed at 525 nm.     

Electron behaviour in CH4／H2 gas mixture in electron-assisted chemical vapour deposition

The behaviour of electrons in CH_{4}/H_{2} gas mixture in electron-assisted chemical vapour deposition of diamond is investigated using Monte Carlo simulation. The electron drift velocity in gas mixture is obtained over a wide range of E/P (the ratio of the electric field to gas pressure) from 1500 to 300000 (V/m kPa^{-1}). The electron energy distribution and average energy under different gas pressure (0.1－20kPa) and CH_{4} concentration (0.5%－10.0%) are calculated. Their effects on the diamond growth are also discussed. It is believed that these results will be helpful to the selection of optimum experimental conditions for high quality diamond film deposition.     

The electrical properties of dielectric stacks of SiO2 and Al2O3 prepared by atomic layer deposition method

We produced dielectric stacks composed of ALD SiO₂ and ALD Al₂O₃, such as SiO₂/Al₂O₃, Al₂O₃/SiO₂, and SiO₂/Al₂O₃/SiO₂, and measured the leakage currents through the stacks in comparison with those of the single oxide layers. SiO₂/Al₂O₃ shows lowest leakage current for negative bias region below 6.4 V, and Al₂O₃/SiO₂ showed highest current under negative biases below 4.5 V. Two distinct electron conduction regimes are observed for Al₂O₃ and SiO₂/Al₂O₃. Poole-Frenkel emission is dominant at the high-voltage regime for both dielectrics, whereas the direct tunneling through the dielectric is dominant at the low-voltage regime. The calculated transition voltage between two regimes for SiO₂ (6.5 nm)/Al₂O₃ (12.6 nm) is −6.4 V, which agrees well with the experimental observation (−6.1 V). For the same EOT of entire dielectric stack, the transition voltage between two regimes decreases with thinner SiO₂ layer.     

Preparation and characterization of amine-functionalized SiO2/TiO2 films for formaldehyde degradation

This paper investigated the gaseous formaldehyde degradation by the amine-functionalized SiO₂/TiO₂ photocatalytic films for improving indoor air quality. The films were synthesized via the co-condensation reaction of methyltrimethoxysilane (MTMOS) and 3-aminopropyltrimethoxysilane (APTMS). The physicochemical properties of prepared photocatalysts were characterized with N₂ adsorption/desorption isotherms measurement, X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FT/IR). The effect of amine-functional groups and the ratio of MTMOS/APTMS precursors on the formaldehyde adsorption and photocatalytic degradation were investigated. The results showed that the formaldehyde adsorption and photocatalytic degradation of the APTMS-functionalized SiO₂/TiO₂ film was higher than that of SiO₂/TiO₂ film due to the surface adsorption on amine sites and the relatively high of the specific surface area of the APTMS-functionalized SiO₂/TiO₂ film (15 times higher than SiO₂/TiO₂). The enhancement of the formaldehyde degradation of the film can be attributed to the synergetic effect of adsorption and subsequent photocatalytic decomposition. The repeatability of photocatalytic film was also tested and the degradation efficiency was 91.0% of initial efficiency after seven cycles.     

Growth of ultra-thin TiO2 films by spray pyrolysis on different substrates

In the present study TiO₂ films were deposited by spray pyrolysis method onto ITO covered glass and Si (1 0 0) substrates. The spray solution containing titanium(IV) isopropoxide, acetylacetone and ethanol was sprayed at a substrate temperature of 450 °C employing 1-125 spray pulses (1 s spray and 30 s pause). According to AFM, continuous coverage of ITO and Si substrates with TiO₂ layer is formed by 5-10 and below 5 spray pulses, respectively. XPS studies revealed that TiO₂ film growth on Si substrate using up to 4 spray pulses follows 2D or layer-by-layer-growth. Above 4 spray pulses, 3D or island growth becomes dominant irrespective of the substrate. Only 50 spray pulses result in TiO₂ layer with the thickness more than XPS measurement escape depth as any signal from the substrate could not be detected. TiO₂ grain size remains 30 nm on ITO and increases from 10-20 nm to 50-100 nm on Si substrate with the number of spray pulses from 1 to 125.     

Multilayer growth of BaTiO3 thin films via pulsed laser deposition: An energy-dependent kinetic Monte Carlo simulation

An energy-dependent kinetic Monte Carlo approach was proposed to simulate the multilayer growth of BaTiO₃ thin films via pulsed laser deposition, in which the four steps, such as the deposition of atoms, the diffusion of adatoms, the bonding of adatoms, and the surface migration of adatoms, were considered. Distinguishing with the traditional solid-on-solid (SOS) model, the adatom bonding and the overhanging of atoms, according to the perovskite structure, were specially adopted to describe the ferroelectric thin film growth. The activation energy was considered from the interactions between the ions, which were calculated by Born-Mayer-Huggins (BMH) potential. From the simulation the relative curves of the each layer coverage and roughness vs total coverage were obtained by varying the parameter values of the incident kinetic energy, laser repetition rate and mean deposition rate. The relationship between growth modes and the different parameters was also acquired.