Indium-induced superstructures formed on Si(1 1 0) surfaces

Si(1 1 0) surfaces covered with small amounts of In deposit and then annealed at high temperature were investigated by RHEED, and two kinds of superstructures with A = 3a and B = −a + 4b, and A = 3a − 2b and B = −2a + 4b as primitive translational vectors are reported to form on the surfaces.     

Electron-phonon interaction in magnesium: From the monolayer to the Mg(0 0 0 1) surface

We report ab initio study of the electron-phonon coupling in a free standing magnesium monolayer and at the Mg(0 0 0 1) surface. The calculations were carried out using a linear-response approach in the plane-wave pseudopotential representation. Eliashberg spectral function α²F(ω) averaged over electron states at the Fermi surface is presented for the monolayer while for the Mg(0 0 0 1) surface, we compute the electron-phonon spectral function α²F_k,i(ω) for surface states at the and points.     

para-Sexiphenyl thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O surfaces

We present a reflectance difference spectroscopy (RDS) study of para-sexiphenyl (p-6P) thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O substrates. The RDS spectra show pronounced anisotropies for p-6P films formed on both substrates at room temperature, demonstrating that the molecules are uniaxially aligned within the films. Based on the RD spectra and the evolution of the optical transitions with p-6P coverage the growth mode on both substrates could be identified. From the dominating RDS feature, assigned to the lowest energy HOMO-LUMO transition, the orientation of the molecular chain can be determined. On Cu(1 1 0), the p-6P molecular chains align in the direction, i.e., along the Cu atomic rows, whereas on the Cu(1 1 0)-(2 × 1)O surface, the molecules are oriented in the orthogonal [0 0 1] direction, i.e., along the “added” Cu-O rows of the Cu(1 1 0)-(2 × 1)O surface. The energetic position and line shape of the main RDS feature differs for the two substrates and varies with p-6P coverage. This fine structure is discussed in terms of different molecular conformations, adlayer structure and vibronic replicas.     

Magnetic anisotropy and electronic structure of iron films on W(1 1 0) by spin-polarized two-electron spectroscopy

Low-energy spin-polarized two-electron spectroscopy was applied to study the spin-dependent electronic structure of 3 ML and 50 ML epitaxial iron films grown on single crystal W(1 1 0). Such films are known to show an in-plane rotation of the easy magnetization axis between thicknesses [M. Donath, Journal of Physics: Condensed Matter 11 (48) (1999) 9421; D. Sander, Journal of Physics: Condensed Matter (20) (2004) R603, O. Fruchart, J.P. Nozieres, D. Givord, Journal of Magnetism and Magnetic Materials 207 (1999) 158, H.J. Elmers, U. Gradmann, Applied Physics A: Materials Science & Processing 51 (3) (1990) 255]. Momentum distributions of correlated electron pairs I(k₁, k₂) excited from the films by 25 eV primary electrons were measured for two opposite polarizations of the incident beam. Energy and momentum conservation laws in the electron scattering events allow the extraction of information on the spin-dependent Bloch spectral density function of the valence electrons in iron films. The observed difference in the electronic structure of these two films is most likely due to the different crystal structures of the films.     

Photoemission study of glycine adsorption on Cu/Au(1 1 1) interfaces

The adsorption of glycine on Au(1 1 1) pre-deposited with different amounts of Cu was investigated with both conventional X-ray photoelectron spectroscopy (XPS) and synchrotron-based photoemission. In the Cu submonolayer range, glycine physically adsorbs on the Cu/Au(1 1 1) surfaces in its zwitterionic form and completely desorbs at 350 K. The C 1s, O 1s and N 1s core level binding energies monotonically increase with Cu coverage. This indicates that, in the Cu submonolayer range, the admetal is alloyed with Au rather than forming overlayers on the Au(1 1 1) substrate, consistent with our recent experimental and theoretical results [X. Zhao, P. Liu, J. Hrbek, J.A. Rodriguez, M. Pérez, Surf. Sci. 592 (2005) 25]. Upon increasing the amount of deposited Cu over 1 ML, part of the glycine overlayer transforms from the zwitterionic form to the anionic form (NH₂CH₂COO⁻) and adsorbs chemically on the Cu/Au(1 1 1) surface with the N 1s binding energy shifted by −2.3 eV. When the amount of deposited Cu is at 3.0 or 6.0 ML, the intensity of the N 1s chemisorption peak increases with aging time at 300 K. It indicates that glycine adsorption induces Cu segregation from the subsurface region onto the top layer of the substrate. Judging from the initial N 1s peak intensities, it is concluded that 64% and 36% of the top layer are still occupied by Au atoms before glycine adsorption even when the amounts of deposited Cu are 3.0 and 6.0 ML, respectively. On the Au(1 1 1) surface pre-dosed with 6.0 ML of Cu, part of the chemisorbed glycine will desorb and part will decompose upon heating to 450-500 K. In addition, about 20% of the glycine exists in the neutral form when the glycine overlayer was dosed on Cu/Au(1 1 1) held at 100 K.     

A multi-scale Monte Carlo study of oxide structures on the Cu(1 0 0) surface

We present a multi-scale Monte Carlo study of the oxidation of the Cu(1 0 0) surface based on the Bortz-Kalos-Lebowitz model with the equilibrium energetics obtained from ab initio calculations. The radial and island size distribution functions are examined and Cu-O structures are analyzed at different temperatures and coverages. We concentrate on the coverages of 0.3 monolayer O or less, with variable sub-monolayer coverages of Cu. The results show that even though the ab initio calculations yield a higher barrier for O than for Cu adatom diffusion on Cu(1 0 0), the stability of Cu structures causes the O adatoms to be more mobile on the Cu(1 0 0) surface than the Cu adatoms. We are able to reproduce the c(2 × 2)-O domains seen in the experiments. However, we give an alternative explanation based on the repulsive interactions of O that, on one hand, cause the local ordering and, on the other hand, prohibits large well-ordered domains. We also give interpretation on the formation of the R45°-O reconstruction of Cu(1 0 0) above the O coverages of 0.3 monolayer based on the ab initio energetics.     

First principles study of the electronic and geometric structure of Cu(5 3 2)

Using density functional theory with the generalized gradient approximation and ultra-soft pseudo-potentials, we have calculated structural relaxations of the Cu(5 3 2) surface which contains steps and kinks. We find the relaxation pattern to oscillate dramatically for atoms in the first 10 layers before decaying rapidly in the bulk. The most striking feature is an outward expansion of the relative interlayer separation d₁₂ of 25%. We also find serious discrepancies with relaxation pattern and relaxation amplitudes calculated using embedded atom method potentials that may reflect the limitation of these potentials to accurately describe systems with complex geometries. Full potential calculations reveal a dispersionless surface state along a high symmetry direction in the surface Brillouin zone. Valence charge density along several planes show excess of charge around kink atom and the nature of bonding with other (5 3 2) atoms.     

Vertical bonding distances of PTCDA on Au(1 1 1) and Ag(1 1 1): Relation to the bonding type

The vertical bonding distance of 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA) above the Au(1 1 1) surface has been measured by the normal incidence X-ray standing wave (NIXSW) technique. The carbon skeleton of PTCDA has a vertical distance of D = (3.27 ± 0.02) Å to the Au(1 1 1) substrate. This distance corresponds very nearly to the sum of the van der Waals radii of carbon and gold, suggesting the adsorption to be a physisorptive one. In contrast, the PTCDA/Ag(1 1 1) interface which according to spectroscopic data follows the standard model of chemisorption very closely, shows a considerably smaller bonding distance of D = (2.86 ± 0.01) Å [A. Hauschild, K. Karki, B.C.C. Cowie, M. Rohlfing, F.S. Tautz, M. Sokolowski, Phys. Rev. Lett. 94 (2005) 036106, comment: Rurali et al., Phys. Lett. 95 (2005) 209205, reply: Phys. Rev. Lett. 95 (2005) 209206]. The different vertical adsorption heights of PTCDA on gold and silver are discussed in relation to the different bonding mechanisms on both noble metal surfaces.     

A refined structural analysis of the PTCDA monolayer on the reconstructed Au(1 1 1) surface—“Rigid or distorted carpet?”

The superstructures (H1 and H2) of perylenetetracarboxylicacid-dianhydride (PTCDA) monolayers on the reconstructed Au(1 1 1) surface reported by Mannsfeld et al. [S. Mannsfeld, M. Toerker, T. Schmitz-Hübsch, F. Sellam, T. Fritz, K. Leo, Org. Electron. 2 (2001) 121] are reinvestigated by high resolution low energy electron diffraction (SPALEED). The purpose of this investigation is to elucidate in detail the point-on-line (p-o-l) structural relation of the homogeneous adsorbate layer with respect to the three reconstruction domains of the Au(1 1 1) surface. For the H2 (non-equilibrium) structure, diffraction patterns without a spot splitting are found, indicating an almost perfect undisturbed overgrowth of the domain boundaries of the reconstruction. As a consequence, the superstructure does not follow strictly the p-o-l relation, but only in an averaged manner. Contrary for the H1 phase (equilibrium structure), a spot splitting is observed, which indicates that superstructure domains on different Au(1 1 1) reconstruction domains exhibit slightly different angular orientations, thus adopting p-o-l relations on all Au(1 1 1) reconstruction domains. The PTCDA layer on Au(1 1 1) may be thus considered as a rigid or distorted carpet, depending on the preparation conditions.     

Electrochemical scanning tunneling microscopy examination of the structures of benzenethiol molecules adsorbed on Au(1 0 0) and Pt(1 0 0) electrodes

In situ electrochemical scanning tunneling microscopy (STM) has been used to examine the structures of benzenethiol adlayers on Au(1 0 0) and Pt(1 0 0) electrodes in 0.1 M HClO₄, revealing the formation of well-ordered adlattices of Au(1 0 0)-(√2 × √5) between 0.2 and 0.9 V and Pt(1 0 0)-(√2 × √2)R45° between 0 and 0.5 V (versus reversible hydrogen electrode), respectively. The coverage of Au(1 0 0)-(√2 × √5) is 0.33, which is identical to those observed for upright alkanethiol admolecules on Au(1 1 1). In comparison, the coverage of Pt(1 0 0)-(√2 × √2)R45° - benzenethiol is 0.5, much higher than those of thiol molecules on gold surfaces. This result suggests that benzenethiol admolecules on Pt(1 0 0) could stand even more upright than those on Au(1 0 0). All benzenethiol admolecules were imaged by the STM as protrusions with equal corrugation heights, suggesting identical molecular registries on Au(1 0 0) and Pt(1 0 0) electrodes, respectively. Modulation of the potential of a benzenethiol-coated Au(1 0 0) electrode resulted in irreversible desorption of admolecules at E ? 0.1 V (vs. reversible hydrogen electrode) and oxidation of admolecules at E ? 0.9 V. In contrast, benzenethiol admolecule was not desorbed from Pt(1 0 0) at potentials as negative as the onset of hydrogen evolution. Raising the potential rendered deposition of more benzenethiol molecules before oxidation of admolecules commenced at E > 0.9 V.     

Photophysical characteristics of 4,4′-bis(N-carbazolyl)tolan derivatives and their application in organic light emitting diodes

4,4′-bis(N-carbazolyl)tolan (BCT) and 4,4′-bis[N-(3,6-di-t-butyl)carbazolyl]tolan (BCT-t-Bu) were synthesized as π-expanded analogs of 4,4′-bis(N-carbazolyl)biphenyl. Their photophysical characteristics both in solution and films were thoroughly investigated. Interestingly, the phosphorescence spectrum of BCT was significantly medium-dependent, and the emission maximum was red-shifted by 131 nm from 489 nm in solution at 77 K to 620 nm in a deposited film at 5 K, suggesting the presence of strong intermolecular interactions in the film. BCT and BCT-t-Bu were found to be useful as host materials for fluorescence-based organic light emitting diodes (OLEDs). However, their low triplet energy levels in films negated their potential to act as hosts in phosphorescence-based OLEDs.     

Comparative study of H2 adsorption on W(1 0 0)-c(2 × 2)Cu and W(1 0 0): Surface alloying effects

The interactions of H and H₂ with W(1 0 0)-c(2 × 2)Cu and W(1 0 0) have been investigated through density functional theory (DFT) calculations to elucidate the effect of Cu atoms on the reactivity of the alloy. Cu atoms do not alter the attraction towards top-W sites felt by H₂ molecules approaching the W(1 0 0) surface but make dissociation more difficult due to the rise of late activation barriers. This is mainly due to the strong decrease in the stability of the atomic adsorbed state on bridge sites, the most favourable ones for H adsorption on W(1 0 0). Still, our results show unambiguously that H₂ dissociative adsorption on perfect terraces of the W(1 0 0)-c(2 × 2)Cu surface is a non-activated process which is consistent with the high sticking probability found in molecular beam experiments at low energies.     

Adsorption energy and geometry of physisorbed organic molecules on Au(1 1 1) probed by surface-state photoemission

The modification of the Au(1 1 1) Shockley-type surface state by an adsorbed monolayer of large π-conjugated molecules was investigated by high-resolution angle-resolved photoelectron spectroscopy (ARPES). We determined binding energy, band mass, and Rashba-splitting and discuss the results in the context of rare-gas adsorption on noble metals. This comparison allows the determination of the bonding strength of the adsorbates, found to be physisorptive with derived binding energies per molecule of 2.0 eV for perylene-tetracarboxylic-dianhydride (PTCDA) and 1.5 eV for naphtalene-tetracarboxylic-dianhydride (NTCDA). We will also present a superstructure model for the NTCDA/Au(1 1 1) system, deduced from low energy electron diffraction images (LEED) in combination with substrate band-backfolding.     

In situ X-ray analysis of solid/electrolyte interfaces: electrodeposition of Cu and Co on Si(1 1 1):H and GaAs(0 0 1) and corrosion of Cu3Au(1 1 1)

Electrochemical deposition of Cu and Co in monolayer amounts on hydrogen terminated Si(1 1 1) was studied ex situ and in situ by X-ray techniques. The X-ray beam was found to have a strong effect on the deposit causing desorption under the beam. Cu deposition on GaAs(0 0 1) from UHV is compared with electrodeposited Cu on the same surface, elucidating similarities and differences of electrochemical and UHV deposition. Roughening due to corrosion of Cu₃Au(1 1 1) is observed by crystal truncation scattering. The observed behaviour of passivation of this surface is explained by the formation of Au clusters, increasingly covering the surface at higher oxidation potential.     

Anchoring sulphur-headgroup organic molecules at Cu(1 0 0): Tailoring the interface electronic states

Sulphur-headgroup organic molecules have been chemisorbed on Cu(1 0 0) as self-assembled monolayers (SAMs) in highly-ordered two-fold symmetry structures, and the electronic states induced at the interface have been measured by photoemission: a close similarity of the main interface states for methane-thiolate and mercaptobenzoxazole on Cu(1 0 0) in the same p(2 × 2)-phase is observed. The bonding states for methane-thiolate/Cu(1 0 0) in the p(2 × 2) and c(2 × 2) structures have been compared to ab-initio calculation of the total density of states (DOS) for the S/Cu(1 0 0) system in the same phases. The major role of the S-Cu bonding to determine the density of state evolution at the interface is brought to light. The observed differences in the two phases depend mainly on the charge distribution associated to the different molecular packing, with a minor role of the radical group.     

Growth mode and electronic structure of Au nano-clusters on NiO(0 0 1) and TiO2(1 1 0)

The growth mode and electronic structure of Au nano-clusters grown on NiO and TiO₂ were analyzed by reflection high-energy electron diffraction, a field-emission type scanning electron microscope, medium energy ion scattering and photoelectron spectroscopy. Au was deposited on clean NiO(0 0 1)-1 × 1 and TiO₂(1 1 0)-1 × 1 surfaces at room temperature with a Knudsen cell at a rate of 0.25-0.35 ML/min (1 ML = 1.39 × 10¹⁵ atoms/cm²:Au(1 1 1)). Initially two-dimensional (2D) islands with thickness of one Au-atom layer grow epitaxially on NiO(0 0 1) and then neighboring 2D-islands link each other to form three-dimensional (3D)-islands with the c-axis oriented to the [1 1 1] direction. The critical size to form 3D-islands is estimated to be about 5 nm². The shape of the 3D-islands is well approximated by a partial sphere with a diameter d and height h ranging from 2.0 to 11.8 nm and from 0.95 to 4.2 nm, respectively for Au coverage from 0.13 to 4.6 ML. The valence band spectra show that the Au/NiO and Au/TiO₂ surfaces have metallic characters for Au coverage above 0.9 ML. We observed Au 4f spectra and found no binding energy shift for Au/NiO but significant higher binding energy shifts for Au/TiO₂ due to an electron charge transfer from Au to TiO₂. The work function of Au/NiO(0 0 1) gradually increases with increase in Au coverage from 4.4 eV (NiO(0 0 1)) to 5.36 eV (Au(1 1 1)). In contrast, a small Au deposition(0.15 to 1.5 ML) on TiO₂(1 1 0) leads to reduction of the work function, which is correlated with an electron charge transfer from Au to TiO₂ substrate.     

Nonlinear optical absorption and fluorescence of phosphine-substituted bithiophenes in the violet-blue spectral region

The nonlinear optical absorptions of two 5,5′-bis(diphenylphosphino)-2,2′-bithiophene derivatives, Ph₂(X)P(C₄H₂S)₂P(X)Ph₂ (X = O, 1; S, 2), have been investigated by direct transmission measurement with both picosecond and nanosecond laser pulses from 420 nm to 480 nm. Saturated dichloromethane solutions of 1 and 2 exhibit strong nonlinear optical absorptions in this violet-blue spectral region with that of 2 being stronger at all wavelengths. In the picosecond regime, at 420 nm, the transmittance rapidly falls to 50% when the incident fluence is 0.22 J/cm² for 1 and 0.11 J/cm² for 2. Two-photon absorption appears to be the primary mechanism for this nonlinear absorption. The two-photon absorption coefficients β for 1 (2.1 cm/GW) and 2 (4.4 cm/GM) were obtained by fitting the measurement of transmittance as the function of incident beam intensity at 420 nm. These β values are comparable with some of the best results obtained for organic materials in the green, red and infrared spectral region. Both compounds also show fluorescence with an emission peak at 390 nm for 1 and 400 nm for 2. The fluorescence of 1 is considerably stronger than is that of 2. The combination of the wide band gap and strong fluorescence emission of 1 makes it a promising candidate as a host material for blue organic light emitting diodes.     

A density-functional study on the atomic geometry and adsorption of the Cu(1 0 0) c(2 × 2)/N Surface

In this work we have performed total-energy calculations on the geometric structure and adsorption properties of Cu(1 0 0) c(2 × 2)/N surface by using the density-functional theory and the projector-augmented wave method. It is concluded that nitrogen atom was adsorbed on a FFH site with a vertical distance of 0.2 Å towards from surface Cu layer. The bond length of the shortest Cu-N bonding is calculated to be 1.83 Å. Geometry optimization calculations exclude out the possibilities of adsorbate induced reconstruction mode suggested by Driver and Woodruff and the atop structural model. The calculated workfunction for this absorbate-adsorbent system is 4.63 eV which is quite close to that of a clean Cu(1 0 0) surface. The total-energy calculations showed that the average adsorption energy per nitrogen in the case of Cu(1 0 0) c(2 × 2)-N is about 4.88 eV with respect to an isolated N atom. The absorption of nitrogen on Cu(1 0 0) surface yields the hybridization between surface Cu atoms and N, and generates the localized surface states at −1.0 eV relative to Fermi energy E_F. The stretch mode of the adsorbed nitrogen at FFH site is about 30.8 meV. The present study provides a strong criterion to account for the local surface geometry in Cu(1 0 0) c(2 × 2)/N surface.     

Conformational isomers of stilbene on Si(1 0 0)

Stilbene (1,2-diphenylethylene) has shown an intriguing isomerisation behavior and may serve as a model system for “molecular switches” incorporating a CC double bond. To evaluate the possible use of such molecules as molecular switches on semiconductor surfaces, the adsorption of cis- and trans-stilbene on Si(1 0 0) has been investigated. Identification of both isomers is achieved by differences in adsorption geometry as revealed by NEXAFS, and differences in electronic structure in the occupied and unoccupied molecular orbitals. For both isomers, bonding takes place via the CC double bond to the Si dimer atoms allowing for free movement of the aromatic rings, a necessary prerequisite for photoinduced isomerisation on the surface. Our experimental results agree well with theoretical calculations.