Effect of in impurity on crystallization kinetics of (Se.7Te.3)100−xInx system

The effect of In impurity on the crystallization kinetics and the changes taking place in the structure of (Se₇Te₃) have been studied by DTA measurements at different heating rates (α=5 deg·min^?1, 10 deg·min^?1, 15 deg·min^?1 and 20 deg·min^?1). From the heating rate dependence of the values ofT _g,T _c andT _p, the glass transition activation energy (E _t) and the crystallization activation energy (E _c) have been obtained for different compositions of (Se₇Te₃)_100?xIn_x (0≤×≤20). The variation of viscosity as a function of temperature has been evaluated using Vogel-Tamman-Fulcher equation. The crystallization data are analysed using Kissinger's and Matusita's approach for nonisothermic crystallization. It has been found that for samples containing In=0, 10, 15, 20 at%, three dimensional nucleation is predominant whereas for samples containing In=5 at%, two dimensional nucleation is the dominant mechanism. The compositional dependence ofT _g and crystallization kinetics are discussed in terms of the modification of the structure of the Se?Te system.     

Temperature regulation for thermal analysis under microwave radiation

In a microwave study a program was designed for thermal regulation. This software allows different types of regulations: P, PI, PD or PID (proportional integration derivation). Results obtained with PID and PI regulation for different previous linear heating schedules (1 deg·s^?1 and 0.15 deg·s^?1) imposed on a polymer sample (DGEBA/3DCM) up to 280°C and more are reported. Mathematical resolution of thermal laws applied to the sample permits the regulation constants (T _i,T _d andG _s) to be linked to the physical features of the polymer. A method used to calculate: the reflexion constant of the wave on the polymer, ρ and the diminution factor, α is presented.     

Nucleation and crystal growth in Na2O · 2 CaO · 3 SiO2 glass: a DTA study

The non-isothermal devitrification of Na₂O · 2 CaO · 3 SiO₂ glass has been studied by differential thermal analysis in order to evaluate, from DTA curves, the temperature of maximum nucleation rate, T_m, and the activation energy values, E_c, for crystal growth.The temperature, T_m=580°C, is very close to the glass transition temperature, T_g=570°C, and the value of E_c=78 Kcal mole^?1 for the surface crystal growth is nearly the same as the value E_c=89 kcal mole^?1 for the bulk crystal growth; both are consistent with the activation energy for viscous flow. It is also pointed out that the nucleation rate—temperature curve and the crystallization rate—temperature curve are partially overlapped.     

Self-reactive rating of thermal runaway hazards on 18650 lithium-ion batteries

Vent sizing package 2 (VSP2) was used to measure the thermal hazard and runaway characteristics of 18650 lithium-ion batteries, which were manufactured by Sanyo Electric Co., Ltd. Runaway reaction behaviors of these batteries were obtained: 50% state of charge (SOC), and 100% SOC. The tests evaluated the thermal hazard characteristics, such as initial exothermic temperature (T ₀), self-heating rate (dT?dt ^?1), pressure-rise rate (dP?dt ^?1), pressure temperature profiles, maximum temperature, and pressure which were observed by adiabatic calorimetric methodology via VSP2 using customized test cells. The safety assessment of lithium-ion cells proved to be an important subject. The maximum self-heating rate (dT?dt ^?1)_max and the largest pressure-rise rate (dP?dt ^?1)_max of Sanyo 18650 lithium-ion battery of 100% SOC were measured to be 37,468.8???C?min^?1 and 10,845.6?psi?min^?1, respectively, and the maximum temperature was 733.1???C. Therefore, a runaway reaction is extremely serious when a lithium-ion battery is exothermic at 100% SOC. This result also demonstrated that the thermal VSP2 is an alternative method of thermal hazard assessment for battery safety research. Finally, self-reactive ratings on thermal hazards of 18650 lithium-ion batteries were studied and elucidated to a deeper extent.     

Dispersion of polymeric-coated–silica aerogel particles in unsaturated polyester composites: Effects on thermal-mechanical properties

The thermal-mechanical properties of unsaturated polyester (UP) composite were enhanced by the dispersion of silica aerogel (SA) with preserved pores. Low-cost SA was prepared from rice husk via the sol-gel process and ambient pressure drying. A new method was proposed to encapsulate the hydrophobic aerogel surface pores with hydrophilic polyvinyl alcohol (PVA) film using the fluidized-bed coating process. The dispersion of PVA-coated aerogel with preserved pores in the polyester matrix resulted in an increase of specific compressive strength (44.1?MPa?·?cm³?g^?1), thermal insulation (0.23?W?m^?1?K^?1), and thermal stability (T_onset?=?310°C), but decreased the glass transition temperature (T_g?=?260°C).     

Rayleigh light scattering in concentrated polymer solutions above the cloud point

Optical heterodyne scattering measurements are presented for concentrated solutions of unreticulated cis-polybutadiene as a function of temperature. For a heptane volume fraction ν, the second derivative of the free energy with respect to concentration varies approximately as ν^?2·9 (T-T_c), where T_c is the spinodal temperature.     

A study of the effect of purity on the use of nickel as a temperature standard for thermomagnetometry

Samples of nickel, varying by four orders of magnitude in their purity, were studied by thermomagnetometry (TM), to determine if the extrapolated end point (T _C ) changes.T _C is virtually identical for the 99.99 and 99.999% samples. Samples of less purity did show changes. Simultaneous DTA/TM can accurately defineT _C by comparing with the melting points of pure metals determined simultaneously. The melting points of lead and zinc bracket theT _C for nickel. They were added to the sample pan prior to TM of nickel. Experiments were performed at heating rates in the range from 1 to 20 deg·min^?1. It serves as a pilot study for the ICTAC Committee for Standardization to more accurately define the recommended values ofT _C .     

Thermal hazard evaluation of tert-butyl peroxide using non-isothermal and adiabatic calorimetric approaches

Tert-butyl peroxide (TBPO), is a typical organic peroxides (OPs),which is widely applied as initiator in poly-glycidyl methacrylate (PGMA) reaction, and is employed to provide a free-radical in frontal polymerization, and which has also caused many thermal runaway reactions and explosions worldwide. To find an unknown and insufficient hazard information for an energetic material, differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2) were employed to detect the fundamental thermokinetic parameters involving the exothermic onset temperature (T ₀), heat of decomposition (??H _d), temperature rise rate (dT · dt ^?1), time to maximum rate under adiabatic situation (TMR_ad), pressure rise rate (dP · dt ^?1), and maximum pressure (P _max), etc. The T ₀ was calculated to be 130?°C using DSC and VSP2. Activation energy (E _a) of TBPO was evaluated to be 136?kJ?mol^?1 by VSP2. In view of the loss prevention, calorimetric applications and model evaluation to integrate thermal hazard development are adequate means for inherently safer design.     

Biodegradable liquid crystalline aromatic/aliphatic copolyesters. Part I: Synthesis, characterization, and hydrolytic degradation of poly(butylene succinate-co-butylene terephthaloyldioxy dibenzoates)

To increase the thermal and mechanical properties of the aliphatic polyester poly(butylene succinate) (PBS), a series of potentially biodegradable liquid crystalline aromatic/aliphatic random copolyesters were prepared by melt polycondensation of new mesogenic monomers dimethyl 4,4′-(terephthaloyldioxy) dibenzoate (MTB), dimethyl succinate, and 1,4-butanediol. The synthesized copolyesters were characterized by means of proton nuclear magnetic resonance spectroscopy (¹H NMR), gel permeation chromatography (GPC), viscosity measurements, differential scanning calorimetry (DSC), thermogravimetry (TG), X-ray diffraction (XRD), polarizing light microscopy (PLM) and mechanical property measurements. The MTB content was varied so that the effects of the mesogen content on the thermal and mechanical properties, degradable behaviours and mesophase were examined. It was found that introducing the rigid rod mesogens could increase the thermal stability and the mechanical properties, while it reduced the melting temperature (T_m), the crystallization temperature (T_c), the degree of relative crystallinity (X_c) and the hydrolytic degradation rate. Only the homopolyester poly(butylenes terephthaloyldioxy dibenzoates) was able to show the schlieren texture characteristic of nematics.     

Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

Dynamic DSC,SAXS and WAXS on homogeneous ethylene-propylene and ethylene-octene copolymers with high comonomer contents

Ethylene-propylene (EP) and ethylene-octene (EO) copolymers polymerized with the aid of homogeneous vanadium and metallocene catalysts were compared by DSC and time-resolved simultaneous SAXS-WAXS-DSC at scanning rates of 10 and 20°C min^?1 using synchrotron radiation. An EP copolymer with a density of 896 kg m^?3 (about 89 mol % ethylene) after compression moulding gave orthorhombic WAXS reflections. The crystallinity as a function of temperature [w ^c (T)] calculated from these reflections using the two-phase model was in good agreement withw ^c (T) calculated fromc _p measurements using DSC. Thec _p measurements also enabled calculation of the baselinec _p and the excessc _p. The SAXS measurements revealed a strong change in the long period in cooling and in heating. The SAXS invariant as a function of temperature showed a maximum in both cooling and heating, which could be explained from the opposing influences of the crystallinity and the electron density difference between the two phases. Two EO copolymers with densities of about 871 kg m^?3 (about 87 mol% ethylene) no longer showed any clear WAXS reflections, although DSC and SAXS measurements showed that these copolymers did crystallize. The similarity between the results led to the conclusion that the copolymers, though based on different catalyst systems — vanadium and metallocene — did not have strongly different sets of propagation probabilities of chain growth during polymerization. On the basis of a Monte Carlo simulation model of crystallization and morphology, based on detailed knowledge of the microchain structure, the difference between WAXS on the one hand and DSC and SAXS on the other could be explained as being due to loosely packed crystallized ethylene sequences in clusters. These do cause the density and the electron density of the cluster to increase (which is measurable by SAXS) and the enthalpy to decrease (which is measurable by DSC) but the clusters are too small and/or too imperfect to give constructive interference in the case of WAXS. Of an EP copolymer with an even lower ethylene content (about 69 mol %), the crystallization and melting processes could still be readily measured by DSC and SAXS, which proves that these techniques are eminently suitable for investigating the crystallization and melting behaviour of the copolymers studied.     

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with ? NCO terminals. Fourier transform infrared (FTIR), ¹³C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between ? NCO groups at the end of the PCL and ? OH (or ? COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (T_g), melting temperature (T_M), crystallizing temperature (T_c), melting enthalpy (ΔH_m), crystallizing enthalpy (ΔH_c), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004     

Synthesis and thermal characteristics of caesium oxalato-metallates of some rare earths

The title compounds were studied by thermogravimetry and differential thermal analysis in flowing dry air, in the temperature range 25–500°C, at a heating rate of 4 deg·min^?1. Thermal analysis revealed two principal effects: dehydration, with the probable formation of a monohydrate, and oxidation of the oxalate ion at around 400°C.     

Combustion curves of some Turkish lignites

In this study, combustion curves of twenty-five Turkish lignites were obtained through use of a differential thermal analyser. 20 mg lignite samples were heated at a constant rate of 10 deg·min^?1 in a 40 cc/min flow of air up to 1073 K and held for 10 minutes at this constant temperature. The combustion curves of the samples are compared and discussed.     

Non-isothermal crystallization kinetics of a Si–Ca–P–Mg bioactive glass

In this work, the crystallization process of a SiO₂–3CaO·P₂O₅–MgO glass was studied by non-isothermal measurements using differential thermal analysis carried out at various heating rates. X-ray diffraction at room and high temperature was used to identify and follow the evolution of crystalline phases with temperature. The activation energy associated with glass transition, (E _g), the activation energy for the crystallization of the primary crystalline phase (E _c), and the Avrami exponent (n) were determined under non-isothermal conditions using different equations, namely from Kissinger, Matusita & Sakka, and Osawa. A complex crystallization process was observed with associated activation energies reflecting the change of behavior during in situ crystal precipitation. It was found that the crystallization process was affected by the fraction of crystallization, (x), giving rise to decreasing activation energy values, E _c(x), with the increase of x. Values ranging from about 580 kJ mol^?1 for the lower crystallized volume fraction to about 480 kJ mol^?1 for volume fractions higher than 80 % were found. The Avrami exponents, calculated for the crystallization process at a constant heating rate of 10 °C min^?1, increased with the crystallized fraction, from 1.6 to 2, indicating that the number of nucleant sites is temperature dependent and that crystals grow as near needle-like structures.     

The vapour pressure,orthobaric volumes,and critical constants of tetramethylsilane

The vapour pressure and orthobaric molar volumes of tetramethylsilane have been messured from 373 K to the critical temperature, and the critical temperature (IPTS-68: T^{o = 448.64 K}), critical pressure (p^{c = 2821 kPa}), and critical molar volume (V_m^c = 361 cm³ mol^?1) have been determined.     

Thermal properties and kinetics of new-generation posterior bulk fill composite cured light-emitting diodes

In this study, the thermal behavior in terms of glass transition (T _g), degradation, and thermal stability of four commercial new-generation posterior bulk fill composites (Surefill SDR, Dentsply; Quixfill, Dentsply; Xtrabase, Voco; and Xtrafill, Voco) activated by light-emitting diodes (LEDs) was analyzed by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The activation energies (E _a) for the decomposition of the dental resins were calculated based on the Kissinger and Doyle kinetic models from the peaks of the endothermic curves obtained when the specimens were heated at four different temperatures (5, 10, 15, and 20 °C min^?1) during DSC. The results show that the Xtrabase composite displayed the highest T _g (120 °C at a 5 °C min^?1 heating rate) and E _a (157.64 kJ mol^?1) values associated with thermal degradation from the main chain of the polymer.     

Thermal Behavior and Non-isothermal Decomposition Reaction Kinetics of NEPE Propellant with Ammonium Dinitramide

Thermal decomposition behavior and non‐isothermal decomposition reaction kinetics of nitrate ester plasticized polyether NEPE propellant containing ammonium dinitramide (ADN), which is one of the most important high energetic materials, were investigated by DSC, TG and DTG at 0.1 MPa. The results show that there are four exothermic peaks on DTG curves and four mass loss stages on TG curves at a heating rate of 2.5 K·min^?1 under 0.1 MPa, and nitric ester evaporates and decomposes in the first stage, ADN decomposes in the second stage, nitrocellulose and cyclotrimethylenetrinitramine (RDX) decompose in the third stage, and ammonium perchlorate decomposes in the fourth stage. It was also found that the thermal decomposition processes of the NEPE propellant with ADN mainly have two mass loss stages with an increase in the heating rate, that is the result of the decomposition heats of the first two processes overlap each other and the mass content of ammonium perchlorate is very little which is not displayed in the fourth stage at the heating rate of 5, 10, and 20 K·min^?1 probably. It was to be found that the exothermal peak temperatures increased with an increase in the heating rate. The reaction mechanism was random nucleation and then growth, and the process can be classified as chemical reaction. The kinetic equations of the main exothermal decomposition reaction can be expressed as: dα/dt=10^12.77(3/2)(1?α)[?ln(1?α)]^1/3 e^{?1.723×104/T}. The critical temperatures of the thermal explosion (T_be and T_bp) obtained from the onset temperature (T_e) and the peak temperature (T_p) on the condition of β→0 are 461.41 and 458.02 K, respectively. Activation entropy (ΔS^≠), activation enthalpy (ΔH^≠), and Gibbs free energy (ΔG^≠) of the decomposition reaction are ?7.02 J·mol^?1·K^?1, 126.19 kJ·mol^?1, and 129.31 kJ·mol^?1, respectively.     

Thermal hazard investigation of cumene hydroperoxide in the first oxidation tower

This article studies the thermokinetics and safety parameters of cumene hydroperoxide (CHP) manufactured in the first oxidation tower. Vent sizing package 2 (VSP2), an adiabatic calorimeter, was employed to determine reaction kinetics, the exothermic onset temperature (T ₀), reaction order (n), ignition runaway temperature (T _{C, I}), etc. The n value and activation energy (E _a) of 15?mass% CHP were calculated to be 0.5 and 120.2?kJ?mol^?1, respectively. The heat generation rate (Q _g) of 15?mass% CHP compared with hS (cooling rate)?=?6.7?J?min^?1?K^?1 of heat balance, the T _S,E and the critical extinction temperature (T _{C, E}) under 110?°C of ambient temperature (T _a) were calculated 111 and 207?°C, respectively. The Q _g of 15?mass% CHP compared with hS?=?0.3?J?min^?1?K^?1 of heat balance was applied to determine the T _{C, I} that was evaluated to be 116?°C. This article describes the best operating conditions when handling CHP, starting from the first oxidation tower.     

Nd3+/Yb3+离子共掺的氧化钛基上转换发光玻璃的热学和力学性能

利用气悬浮无容器技术制备出了Nd³⁺/Yb³⁺稀土离子共掺杂的TiO₂-La₂O₃-ZrO₂(TLZ)发光玻璃. 利用差热分析(DTA)技术研究了该类新型稀土掺杂TiO₂基上转换发光玻璃的热稳定性,主要包括玻璃化转变温度、析晶起始温度以及析晶峰值温度. 并采用两种热分析动力学计算方法得到TLZ玻璃的析晶活化能值和指前因子.本文还研究了TLZ 发光玻璃的力学性能,发现其维氏硬度大小为7.50 GPa,断裂韧性大于1.20 MPa·m^1/2. 此外,还对TLZ玻璃在808 nm激光激发下的上转换发光性能进行了研究,实验结果显示光谱中有三个强发射谱峰. 优异的上转换发光性能以及良好的热稳定性和机械性能表明,这类新材料在上转换器件的实际应用中具有很大的潜力.