Cycloaddition between electron-deficient pi-systems, photochemical and radical-induced reactions: a novel, general, and stereoselective route to polyfunctionalized bridged bicyclo[2.2.2]octanes, bicyclo[3.3.0]octanes, bicyclo[4.2.0]octanes, and tricyclo[4.3.1.0(3,7)]decanes

A novel, general, and stereoselective route to functionalized bridged bicyclo[2.2.2]octanes, bicyclo[3.3.0]octanes, bicyclo[4.2.0]octanes, and tricyclo[4.3.1.0(3,7)]decanes has been described. Various functionalized and substituted bicyclo[2.2.2]octanes endowed with a beta,gamma-enone chromophore were synthesized via cycloaddition of in situ generated cyclohexa-2,4-dienones with electron-deficient 2pi partners and manipulation of the resulting adducts. Triplet sensitized irradiation of bridged bicyclooctenones led to synthesis of bicyclo[3.3.0]octanoids, whereas the direct irradiation furnished bicyclo[4.2.0]octanes in stereoselective fashion as a result of modulation of reactivity in excited states. Further, manipulation of the adducts led to appropriately appended and functionalized bicyclo[2.2.2]octanes that upon radical induced cyclization provided an efficient and stereoselective route to the tricyclo[4.3.1.0(3,7)]decane (isotwistane) framework of pupukeananes.     

Oxidative Dearomatization: Synthesis of Functionalized Bicyclo[2.2.2]octenones,Sigmatropic Shift in Excited State,and Radical-Induced Cleavage of Cyclopropane Ring

Synthesis of novel bicyclo[2.2.2]octenones endowed with a β,γ-enone system in which γ-carbon is substituted with an electron-withdrawing group from simple aromatics is described. Oxa-di-pi-methane reaction of bicyclo[2.2.2]octenones to functionalized bicyclo[3.3.0]octanes and their transformation to bicyclo[3.2.1]octane framework are also presented.     

Bicyclo[3.3.1]nonane and its derivatives—IV : Reactions of some carbonyl derivatives of bicyclo[3.3.1]nonane with diazomethane

The reaction of bicyclo[3.3.1]nonane-2,6-dione with diazomethane in situ does not lead to the homologous bicyclo[4.3.1]decane-2,7-dione, but mainly to tricyclo[4.4.0.0^2,9]decan-9-ol-5-one. The structure of the latter was confirmed by the proton NMR spectra measured with an addition of Eu(DPM)₃, A mixture of tricyclo[4,4.0.0^2,9]decan-9-ol-5-one and bicyclo[4.3.1]decane-2,7-dione results when solutions of diazomethane are used. The reaction of bicyclo[3.3.1]nonane-2,6-dione monoethyleneacetal with diazomethane in situ yields predominantly bicyclo[4.3.1]decane-2,7-dione. Under the same conditions bicyclo[3.3.1]nonan-2-one gives with diazomethane in situ only bicyclo[4.3.1]decan-2-one.     

Synthesis of 1,10-phenanthrolines fused with bicyclo[3.3.0]octane and bicyclo[3.3.1]nonane frameworks

Reactions of bicyclo[3.3.1]nonane-2,6-dione and bicyclo[3.3.0]octane-3,7-dione with 8-amino-7-quino-linecarbaldehyde under basic conditions led to fused nonplanar compounds with one or two 1,10-phenanthroline moieties. The novel heterocyclic systems bicyclo[3.3.1]nonano[2,3-b]bis[1,10]-phenanthroline, cis-bicyclo[3.3.0]octano[3,2-b:7,6-b']bis[1,10]phenanthroline, bicyclo[3.3.1]nona-no[2,3-b:6,7-b']bis[1,10]phenanthroline, and 8H-9,16-methanoindolo[2',3':5,6]cycloocta[1,2-b]bis-[1,10]-phenanthroline have been synthesized and characterized.     

Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings

Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings are prepared from 1,4-bis(carboethoxy)bicyclo[2.2.2]octane, 1,4-bis(hydroxymethyl)bicyclo[2.2.2]-octane and the 1,5-disubstituted bicyclo[3.2.2]nonane analogs. These polyesters are compared to the related polymers containing 1,4-phenylene and trans-1,4-cyclohexylene rings in terms of their melting point, thermal stabilities and oxidative stabilities. The lower symmetry of the bicyclo[3.2.2]nonane ring produces lower-melting polymers than the other ring systems. The remaining three rings are approximately equivalent in their effect on the melting point of a polymer provided that no more than one bicyclo[2.2.2]octane ring is present per polymer repeat unit. Two such rings produce a highermelting polymer than any other combination. Both the thermal and oxidative stabilities of the polyesters is improved by the presence of the bicyclo rings. This is attributed to the rings providing an approximation of a ladder polymer.     

Experimental and computational bridgehead C-H bond dissociation enthalpies

Bridgehead C-H bond dissociation enthalpies of 105.7 ± 2.0, 102.9 ± 1.7, and 102.4 ± 1.9 kcal mol(-1) for bicyclo[2.2.1]heptane, bicyclo[2.2.2]octane, and adamantane, respectively, were determined in the gas phase by making use of a thermodynamic cycle (i.e., BDE(R-H) = ΔH°(acid)(H-X) - IE(H(·)) + EA(X(·))). These results are in good accord with high-level G3 theory calculations, and the experimental values along with G3 predictions for bicyclo[1.1.1]pentane, bicyclo[2.1.1]hexane, bicyclo[3.1.1]heptane, and bicyclo[4.2.1]nonane were found to correlate with the flexibility of the ring system. Rare examples of alkyl anions in the gas phase are also provided.     

Carbon-13 chemical shifts of bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives

¹³C chemical shifts of more than fifty bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives (hydrocarbons, alcohols, ketones and esters) have been determined. The usefulness of ethyl derivatives for the assignment of close ¹³C chemical shifts in bicyclic methyl derivatives is shown both for the bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane series. Comparison of substituent effects on α-, β-, γ- and δ-carbons in both series of compounds shows remarkable differences in steric interactions. In contrast to the rigid bicyclo[2.2.1]heptane system, both chair and boat conformations can be predominant in the bicyclo[3.2.1]octane series with the conformationally flexible 6-membered ring.     

Bicyclanes—II On the preparation and halogenation of bicyclo[2,2,2]octane

In the presence of traces of acidic materials, Diels-Alder condensation of ethylene and cyclohexadiene-1,3 gives, besides the expected bicyclo[2,2,2]octene-2, the isomeric bicyclo[3,2,1] octene-2; the latter is formed through acid-catalysed rearrangement. Its structure was proved among other things by stepwise oxidative degradation to cyclopentane-cis-1,3-dicarboxylic acid.

Competitive halogenations of bicyclo[2,2,2]octane and cyclohexane showed that the methylene groups in the latter are somewhat more reactive. Reactivity ratios decreased at increasing temperatures.

The reactivity of the bridgehead positions in bicyclo-octane towards hydrogen removal is appreciably larger than that of the methylene groups, in contrast to the situation in bicyclo[2,2,1]-heptane. This is probably due to the greater flexibility of the bicyclo-octane skeleton permitting a near-planar configuration at the bridgehead. Some of the differences between the bicyclo[2,2,2]octane, bicyclo[2,2,1]heptane and cyclohexane systems are briefly discussed.     

Expeditious synthesis of N-bridged heterocycles via dipolar cycloaddition of pentafulvenes with 3-oxidopyridinium betaines

A new and highly versatile approach towards the synthesis of bicyclo[6.3.0]undecanes and bicyclo[5.3.0]decanes was accomplished. The methodology adopted involved [6+3] and [3+2] cycloaddition reactions of pentafulvenes with 3-oxidopyridinium betaines generated either by the action of a base on the pyridinium salt or thermally from pyridinium betaine dimer. These well-functionalized bicyclo[6.3.0]undecanes and bicyclo[5.3.0]decanes offer a wide range of synthetic options, which can be expected to translate into a variety of rapid and efficient synthesis of natural products.     

Rearrangement of a mesylate tropane intermediate in nucleophilic substitution reactions. Synthesis of aza-bicyclo[3.2.1]octane and aza-bicyclo[3.2.2]nonane ethers,imides, and amines

Nucleophilic substitution of 2beta-mesyloxymethyl-N-methyl-3beta-p-tolyl-tropane intermediate with alkoxides, metal imides, or amines was found to lead not only to the expected bicyclo[3.2.1]octane (tropane) ether, imide, and amine derivatives but also to unexpected bicyclo[3.2.2]nonane derivatives. When alkoxides were used as nucleophile, only the rearranged bicyclo[3.2.2]nonane structure was obtained, whereas the use of amines or imides as nucleophile afforded a mixture of the two structures. The bicyclo[3.2.2]nonane structure was assigned by NMR analysis.     

Determination de la configuration absolue de quelques derives du bicyclo[2.2.2]octane: Utilisation comparee de la regle des octants et de la methode d'horeau

A series of bicyclo[2.2.2]octane derivatives whose absolute configurations are known through chemical correlations with confirmed reference products (bicyclo[2.2.2]octanol, bicyclo[2.2.2]octene carboxylic acid) have been prepared.     

Electronic and Steric Structure of Thermal Isomerization Products of 1-Methyltricyclo[4.1.0.02,7]heptane Radical Cation

Distributions of the positive charge and unpaired electron in stable conformers of the thermal isomerization products of 1-methyltricyclo[4.1.0.02,7]heptane radical cation, having bicyclo[3.1.1]heptane, bicyclo[4.1.0]heptane, bicyclo[3.2.0]hept-6-ene, and 1,3-cycloheptadiene skeletons, were estimated by the PM3 semiempirical method.     

Synthesis of porphyrin dimers fused with a benzene unit

Bicyclo[2.2.2]octadiene-connected pyrrolo-porphyrins have been prepared by an inverse-type [3+1] porphyrin synthesis of a bicyclo[2.2.2]octadiene-fused dipyrrole with a tripyrrane dicarbaldehyde. Another [3+1] porphyrin synthesis of pyrrole-connected porphyrins with the same or other tripyrrane dicarbaldehydes gave bicyclo[2.2.2]octadiene-bridged diporphyrins, the central metals and/or peripheral substituents of which were different. Thermal decomposition of the bicyclo[2.2.2]octadiene skeleton to a benzene moiety gave pi-system-fused porphyrin dimers in a highly pure form.     

Non‐empirical calculations of NMR indirect carbon‐carbon coupling constants. Part 5: Bridged bicycloalkanes

All possible J(C,C) of the bicarbocyclic frameworks together with J(C,H) and J(H,H) at bridgeheads in the series of six bridged bicycloalkanes, bicyclo[1.1.0]butane, bicyclo[2.1.0]pentane, bicyclo[3.1.0]hexane, bicyclo[2.2.0]hexane, bicyclo[3.2.0]heptane and bicyclo[3.3.0]octane, were calculated at the SOPPA level with correlation consistent Dunning sets cc‐pVTZ‐Cs augmented with inner core s‐functions and locally dense Sauer sets aug‐cc‐pVTZ‐J augmented with tight s‐functions and rationalized in terms of the multipath coupling mechanism and hybridization effects explaining many interesting structural trends. Copyright © 2003 John Wiley & Sons, Ltd.     

Herstellung der reinen,bicyclischen Olefine Bicyclo[4.2.1]non-2-en,Bicyclo[4.2.1]non-3-en und Bicyclo[4.2.1]non-7-en

Synthesis of the pure, bicyclic olefines Bicyclo[4.2.1]non-2-ene, Bicyclo[4.2.1]non-3-ene and Bicyclo[4.2.1]non-7-ene The synthesis of the olefines bicyclo[4.2.1]non-2-ene ( 3 ), bicyclo[4.2.1]non-3-ene ( 4 ) and bicyclo[4.2.1]non-7-ene ( 5 ) of high ‘certified’ purity from one common precursor ( 7 ) is described.     

Mass spectral skeletal and hydrogen rearrangements in some bicyclic ketones

The mass spectra of bicyclic ketones bicyclo[4.2.1]nonan-9-one, bicyclo[5.2.1]decan-10-one, bicyclo[4.3.1]decan-10-one and bicyclo[5.3.1]undecan-11-one specifically deuterated in positions both adjacent and nonadjacent to the carbonyl carbon have been investigated. The fragmentation and rearrangement processes predominating appear to be dictated by the inherent strain in the molecules. An unusual tendency for fragment ions to recyclize is supported by deuterium labeling results, high resolution mass measurements, metastable studies and comparison with model compounds. The mass spectra of the bicyclic ketones under investigation are considerably more complex than those of acyclic ketones.     

Mo(CO)6- and [Rh(CO)2Cl]2-catalyzed allenic cyclocarbonylation reactions of alkynones: efficient access to bicyclic dienediones

Allenyl alkynones are efficiently transformed into fused bicyclic dienediones via cyclocarbonylation reaction conditions. Mo(CO)6/DMSO reaction conditions result in the formation of a bicyclo[3.3.0]octenone ring system, and the [Rh(CO)2Cl]2-catalyzed reaction affords bicyclo[4.3.0]nonenone and bicyclo[5.3.0]decenone scaffolds.     

Useful enantioselective bicyclization reactions using an N-protonated chiral oxazaborolidine as catalyst

[reaction: see text] Nine examples are reported of enantioselective [4 + 2] cycloaddition reactions of achiral, acyclic substrates to form chiral bicyclo[4.3.0]nonane or bicyclo[4.4.0]decane derivatives.     

Oxabicyclo[3.2.1]octane derivatives as highly reactive dienophiles: synthesis of bicyclo[5.n.0] systems

[reaction: see text] We have developed highly versatile, homochiral oxabicyclo[3.2.1]octadiene building blocks for the synthesis of natural products. We have found that these bridged alkenes undergo exceptionally facile Diels-Alder reactions and react faster than several well studied bicyclo[2.2.1]heptene dienophiles. The reaction proceeds with high levels of stereochemical control and in very good to excellent yields, providing access to bicyclo[5.4.0]undecane and bicyclo[5.3.0]decane systems. This reactivity is attributed to strain and homoconjugation effects.     

[1.1.1]Propellane: Reaction with free radicals

[1.1.1]Propellane is more reactive towards free radicals than bicyclo[1.1.0]butane, and much more reactive than bicyclo[2.1.0]pentane. Therefore, the reactivity is not determined by strain energy relief or the HOMO energy. The addition of acetaldehyde is unique in that a 1:2 adduct is formed. A number of other additions are described, and provide convenient routes to 1,3-disubstituted bicyclo[1.1.1]pentanes.