Propagation offset characteristics of annular laser beams from confocal unstable resonators through the natural atmosphere

Based on the laser field from a positive confocal unstable resonator (ab initio), the propagation characteristics of the beam through atmosphere are investigated by means of fast Fourier transform (FFT), and it is assumed that the refractive index and absorption of atmosphere are only decided by the air molecules. Considering the thermal effects of the laser beam and wind velocity of air, we evaluate the beam offsets, beam spreading, and beam qualities of the laser field transmitting from the resonator through the natural atmosphere. Meanwhile, the far-field intensity distributions of the laser beam with various intensities in the atmosphere are obtained. It is shown that the far-field diffraction patterns are deformed due to absorption of air and wind velocity. β parameter and Strehl ratio, which are usually used for high-power lasers, are introduced to estimate the beam quality characteristics. With increasing the intensity of the beam, the far-field diagram patterns are outspreaded, the peak intensities reduced, the peak centers shifted, and the beam quality characteristics greatly degraded.     

Formation of diffraction-free beams by laser generation of conical radiation in a Kerr medium

Received: 16 June 1998     

Multiwavelength Q-switched CO2 laser with continuous discharge

A low-pressure (20 mbar) CO₂ laser allows to extract pulses at several selected wavelengths simultaneously from the same active medium. We demonstrated this, using an industrial laser modified by a Q-switch and a resonator with two branches. In one branch the wavelengths are spatially separated, whereas in the other they oscillate in one common transverse mode. We designed a multi-wavelength resonator which requires a single additional reflector compared to usual laser cavities. It provided tunable oscillation at six wavelength simultaneously.     

A pulsed dye laser with grazing incidence and folded cavity

A novel design of a transversally pumped pulsed dye laser resonator using grazing incidence in a folded astigmatic cavity is described. The stability conditions, beam waist and output divergence of the oscillating mode are derived from the ray transfer matrix for this cavity. A diffraction limited gaussian beam is obtained. The linewidth can be adjusted down to 610 MHz without using any intracavity etalon.     

Simultaneous two-line operation of a CW CO laser with arbitrary choice of laser transitions

An experimental scheme is discussed, by which we can operate a CO laser at two individually selectable lines from the same gain tube. There are virtually no restrictions on the wavelength separation of the two lines within the manifold of the available lasing transitions. Experimental verifications of this scheme are described and the mutual influence of the simultaneous laser operation is discussed.Dedicated to Professor Siegfried Penselin on the occasion of his 60th birthday     

A single-mode KrF laser

Single-mode operation of a KrF laser oscillator has been achieved for the first time. The laser medium is pumped by an electron beam which allows excitation for a much longer duration than with discharge pumping. The long excitation time, together with the use of a short oscillator cavity with a low single-pass gain, allows many roundtrips before saturation is reached. This makes line-narrowing easier and single-mode operation has been achieved using only two intracavity etalons.Technical Research Centre of Finland, Helsinki, Finland     

Automatic alignment of a high-power CO2 laser resonator

An on-line, electronic feedback approach for automatic alignment of a laser resonator is described. A measure of the resonator alignment error is derived by partitioning a 1% sample of the laser output into quadrants, and using standard electronic circuits to compare the average power present in each quadrant. A motorized X — Y alignment system is then used to implement the alignment changes required to maintain optimum output quality from the laser. The system is shown capable of stabilizing the output power in each quadrant of the beam to within about 2% of the optimum level.     

Short-wavelength far-infrared laser cavity yielding new laser emissions in CD3OH

A significantly improved far-infrared laser has been used to generate optically pumped laser emissions from 26 to 150 μm for CD₃OH. Using an X–V-pumping geometry, several new laser emissions have been found for CD₃OH. In addition, an increase in power, by factors from 10 to 1000, for many of the previously known shorter-wavelength laser lines, below 100 μm, has been observed. Frequency measurements for several lines have also been performed and have been reported to a fractional uncertainty up to ±2×10^-7, permitting the spectroscopic assignment of the laser transition. One of the frequency-measured lines, 44.256 μm observed using the 10R34 pump, has confirmed the assignment of the previously reported FIR emission (n,K;J)=(1,7;20)?(0,8;20)A in the ground vibrational state. Received: 26 October 2000 / Published online: 7 February 2001     

Diode laser spectrometer for high-resolution spectroscopy in the visible range

A high-resolution diode laser spectrometer operating at 657 nm is described. To achieve a narrow linewidth and a high power, a master-slave laser system is employed. The master laser is an extended cavity diode laser whose linewidth is reduced to less than 100 Hz by the FM sideband technique. The slave laser is an AR-coated diode laser and characteristics of injection locking are experimentally studied. The injection current of the slave laser is utilized to stabilize the output power or to produce pulsed output. Using this spectrometer, we probed the intercombination line of Ca and observed high-contrast optical Ramsey fringes with a linewidth of 10 kHz. A velocity-selective Ramsey fringe is also observed in the pulse-mode operation.     

Folded diffractive laser resonators with user-defined fundamental mode

The adjustment effort required for the alignment of laser resonators with arbitrarily shaped end mirrors can be significantly reduced by folding the resonator path half-way between the two end mirrors and by slightly tilting the resonator axis. Thus the resulting resonator consists only of one diffractive mirror and a plane mirror, and the separate alignment of both diffractive end mirrors with respect to each other can be avoided. This principle is demonstrated by a Nd:YAG laser with super-Gaussian output beam. Furthermore, it is shown theoretically that the influence of phase quantization effects on the beam quality can be strongly reduced as a consequence of the tilted resonator axis.     

3D Modeling of amplification processes in CPA laser amplifiers

We present here chirped pulse amplification simulations allowing for the extension of the generally used 1D model. The importance of the beam spatial profiles, diffraction and thermal effects in simulations is clearly shown in order to describe with accuracy the gain saturation. Experimental measurements performed on a 100 TW laser validate this calculation. The effects of dispersion and self-focusing are also studied.This revised version was published online in August 2005 with a corrected cover date.     

Tunable and high-energy Q-switched operation of an alexandrite slave ring laser

Narrow bandwith tunable Q-switched operation of an alexandrite oscillator was used for injection-locking of a high-energy alexandrite slave ring laser. Pulses with up to 600 mJ in energy over a 600 cm^–1 tuning range were obtained.     

High power continuous-wave diode-laser-pumped Nd:YAG laser

We report on a diode-laser-pumped cw Nd: YAG laser operating at a power level of 150 W. By using a transverse pump geometry, the radiation of 54 diode lasers with an output power of 10 W each is coupled into a Nd:YAG rod. In multimode operation, an optical slope efficiency of 32% and an optical to optical efficiency of 29% are obtained. In TEM₀₀ operation, an output power of more than 30 W is realized with an optical to optical efficiency of 10%.     

Temperature behavior of implanted and pulsed laser irradiated GaAs

Recent studies have shown that the Low-Power Pulsed-Laser Annealing (LPPLA) of ion-implanted GaAs specimens can be realized in a power-density window in which a complete structural reordering is guaranted. As the experimentally employed conditions allow us to describe the theoretical problem in an unidimensional space domain, we describe here a method to investigate the in-depth temperature behavior during the low-power pulsed-laser irradiation of ion-implanted semiconductors. The application of this method to GaAs specimens shows that the upper limit of the energy density window is connected with the exceeding of the critical temperature T _c below which the As evaporation rate is negligible.     

An argon ion ring laser as a gyroscope

As a prototype gyroscope for a precision measurement of the Earth's rotation _E, we set up an argon ion ring laser with an area of 1.4 m². Different cavity geometries were tested in order to achieve a cancellation of the effect of the plasma flow. In a set-up with two laser tubes of the same type facing towards opposite directions, a stability of the beat frequency of 2–3 _E was measured. In a configuration with a double transition of the laser beam through the tube, the lock-in threshold was too high for the Earth's rotation to be measured, however, no effect of the plasma flow was observed.     

Generation of a Sub-10fs Laser Pulse by a Ring Oscillator with a High Repetition Rate

A compact femtosecond Ti：sapphire ring oscillator composed of chirped mirrors is designed. By accurately optimizing the intra-cavity dispersion and the mode locking range of the ring configuration, we generate laser pulses as short as 7.7fs with a repetition rate as high as 745 MHz. The spectrum spans from 660nm to 94Ohm and the average output power is 480mW under the cw pump laser of 7.5 W.     

A tuneable, single-mode titanium-doped-sapphire laser source with variable pulse duration in the nanosecond regime

We built and characterized a high-energy, injection-seeded, single-longitudinal-mode pulsed titanium-doped-sapphire laser with tuneable wavelength in the near-infrared and variable pulse temporal duration in the nanosecond regime. We show experimentally how the pulse duration can be easily varied either by changing the cavity length or by changing the pump energy. We successfully interpreted these results on the basis of a theoretical model which treats the operation of this type of laser as a gain-switching technique. Also, as far as the stabilization of the laser cavity, compared to the traditional techniques we employed a novel simplified solution involving the use of an avalanche photodiode.     

Continuous-wave high-power multi-pass pumped thin-disc Nd:GdVO4 laser

A thin-disc Nd:GdVO₄ laser in multi-pass pumping scheme was developed. Continuous-wave output power of 13.9 W at 1.06 μm for an absorbed power at 808 nm of 22 W was demonstrated from a 250-μm thick, 0.5-at.% Nd:GdVO₄ in a 4-pass pumping; the slope efficiency in absorbed power was 0.65, or 0.47 in input power. Output performances were also investigated under diode laser pumping at 879 nm, directly into the emitting ⁴F_3/2 level: maximum power of 3.6 W was obtained at 6.2 W of absorbed power with 0.69 slope efficiency. Compared with pumping at 808 nm, into the highly absorbing ⁴F_5/2 level, improvements of laser parameter in absorbed power (increase of slope efficiency, decrease of threshold) were obtained, showing the advantages of the pumping into the emitting level. However, the laser performances expressed vs. the incident power were modest owing to the low absorption efficiency at 879 nm. Thus, increased number of passes of the medium would be necessary in order to match the performances in input power obtained under 808-nm pumping.     

Controlled two-pulse generation in Q-switch mode from a single laser using Q-modulator with frustrated total internal reflection

In this work a cavity design for double-pulse generation in Q-switched mode from a single laser is proposed, based on the construction of a second laser channel using a FTIR (frustrated total internal reflection) Q-modulator. A time interval between the two pulses from 500 ns to 120 μs is obtained in a Nd:YAG laser. A comparison with other methods and cavity designs for double-pulse generation is presented. The case when this technique is applied on a tunable laser with metastable upper laser level (Cr:LiCAF, Cr:LiSAF, Alexandrite, Co:MgF₂ or other) is also considered. Even though the method presented in the paper does not rely only on the cavity configuration proposed, some advantages can be obtained – both polarization and wavelength-independent tuning without polarization and wavelength restrictions in combination with the possibility of different wavelengths and polarizations in each pulse. Moreover, by using an active medium generating wavelengths around and up to 3 μm, the Pockels-cell-Q-switch optical transmission problems can be avoided. Received: 9 May 2001 / Revised version: 2 August 2001 / Published online: 15 October 2001     

Influence of cavity configuration on the pulse energy of a high-pressure molecular fluorine laser

We report an investigation of a high-pressure molecular fluorine laser operating at 158 nm. Several cavity configurations were studied, including one employing a roof prism as the high reflector. A maximum VUV pulse energy of 237 mJ, corresponding to a specific output of 3.3 J/1 was obtained when the laser was operated as a double-ended device. With single-ended operation the largest output energy was 176 mJ at a specific output of 2.5 J/1.