Preparation of surface molecularly imprinted Ru-complex catalysts for asymmetric transfer hydrogenation in water media

Molecularly imprinted Ru-complex catalysts acting in water were prepared on a SiO(2) surface by molecular imprinting of a SiO(2)-supported Ru-complex using organic polymers as surface matrix overlayers. (R)-1-(o-fluorophenyl)ethanol, which is one of the hydrogenated products of o-fluoroacetophenone, was imprinted on the supported Ru-complex as a template, and an active Ru-complex with a shape-selective reaction space (molecularly imprinted cavity) was prepared inside the wall of the hydrophobic organic polymer matrix overlayers. Structures of the SiO(2)-supported and molecularly imprinted Ru catalysts were characterized by means of solid-state NMR, XPS, XRF, ICP, UV/vis, XAFS, TGA, and SEM. The molecularly imprinted Ru catalysts exhibited fine shape selectivity and enantioselectivity for the asymmetric transfer hydrogenation of o-fluoroacetophenone and its derivatives.     

担载型钌催化剂吸附CO性能的原位红外研究

用原位红外研究了ＣＯ的吸附与脱附，ＣＯ／Ｈ２的共吸附及反应，考察了焙烧温度对Ｒｕ／Ａｌ２Ｏ３及Ｒｕ／ＳｉＯ２催化剂的影响，结果表明，经不同温度焙烧的催化剂样品，其吸附性能有很大差别。随着焙烧温度的升高，金属－载体相互作用增强，导致ＣＯ吸附量减少。Ｒｕ／Ａｌ２Ｏ３吸附的ＣＯ较稳定，而Ｒｕ／ＳｉＯ２吸附的ＣＯ在高温易脱附。各不同ＣＯ吸会态间、多重态更易发生反应。在未焙烧的Ｒｕ／ＳｉＯ２低ＣＯ／Ｈ２反应     

核-壳型厚朴酚印迹聚合物的制备及性能研究

以表面修饰功能基团的SiO2微球为基体,以厚朴酚为模板分子,丙烯酰胺为功能单体,丙烯酸乙二醇二甲酯为交联剂,在SiO2微球表面制备对厚朴酚具有较好选择识别能力的核-壳型印迹聚合物.采用红外光谱及扫描电镜等技术表征聚合物的结构及形态.结果表明,该印迹聚合物表面成功制备了壳层厚度约为200nm的均匀印迹层.通过静态吸附、Scatchard分析法以及竞争吸附实验研究了该聚合物的吸附性能和选择性,结果表明,它对厚朴酚形成均一结合位点,离解常数为0.19mg/mL.     

Energy-gaining formation and catalytic behavior of active structures in a SiO(2)-supported unsaturated Ru complex catalyst for alkene epoxidation by DFT calculations

The formation and catalytic behavior of active structures in a SiO(2)-supported unsaturated Ru complex catalyst for alkene epoxidation were studied by means of hybrid density functional theory (DFT) calculations. An energy-gaining route for the catalyst activation was found to allow the formation of active unsaturated Ru complexes and the remarkable alkene epoxidation via an exothermic reaction path between isobutyraldehyde and oxygen. In the proposed Bartlett mechanism, Ru promotes the formation of peracid intermediate and facilitates the intermolecular hydrogen transfer in the peracid intermediate, while alkene molecules do not directly coordinate to the Ru site. It was found that stilbene epoxidation is easier to achieve than ethene epoxidation thanks to the electron donating phenyl groups.     

多壁碳纳米管表面对硝基苯酚印迹复合材料的制备与吸附性能

以多壁碳纳米管表面接枝的L-苯丙氨酸为结合位点, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 采用沉淀聚合技术, 在碳纳米管表面制备了对硝基苯酚印迹复合材料. 采用红外光谱和扫描电镜研究了该印迹复合材料的结构和形貌, 结果表明, 在碳纳米管表面接枝了一层稳定的印迹材料. 采用高效液相色谱研究了该印迹材料的等温吸附性能, 结果表明, 该印迹材料对模板分子具有较大的吸附容量(Qmax=80.5 μmol/g)和良好的选择吸附性能(选择因子达2.5). 以该印迹材料作为固相萃取吸附剂, 研究了它对对硝基苯酚和其它结构类似物混合溶液的动态吸附性能, 结果表明, 印迹复合材料对对硝基苯酚的吸附容量不受结构类似物浓度的影响, 能较好地应用于对硝基苯酚的分离富集检测.     

Sulfoxidation on a SiO2-supported Ru complex using O2/aldehyde system

A site-isolated SiO(2)-supported Ru-monomer complex, whose structure was characterized by means of solid-state NMR, XPS, UV/vis, and Ru K-edge EXAFS, was found to be efficient for sulfoxidation using an O(2)/aldehyde system. Significant enhancement of sulfoxidation rates was observed on the SiO(2)-supported Ru complex for various sulfide derivatives.     

Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine

Atrazine contamination of water is of considerable concern because of the potential hazard to human health. In this study, a magnetic molecularly imprinted polymer for atrazine was prepared by the surface‐imprinting technique using Fe₃O₄ as the core, mesoporous silica as the carrier, atrazine as the template, and itaconic acid as the functional monomer. The magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and vibration‐sample magnetometry. The binding properties of the magnetic molecularly imprinted polymer toward atrazine were investigated by adsorption isotherms, kinetics, and competitive adsorption. It was found that the adsorption equilibrium was achieved within 2 h, the maximum adsorption capacity of atrazine was 8.8 μmol/g, and the adsorption process could be well described by the Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer exhibited good adsorption selectivity for atrazine with respect to structural analogues, such as cyanazine, simetryne, and prometryn. The reusability of the magnetic molecularly imprinted polymer was demonstrated for at least five repeated cycles without a significant decrease in adsorption capacity. These results suggested that the magnetic molecularly imprinted polymer could be used as an efficient material for the selective adsorption and removal of atrazine from water samples.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

Ru-B/SiO2非晶态催化剂应用于液相葡萄糖加氢制山梨醇

 采用浸渍法结合KBH4还原法制备了Ru-B/SiO2非晶态催化剂(3.14%Ru),并将其用于液相葡萄糖加氢制山梨醇反应. 结果表明,该催化剂具有良好的热稳定性,且其催化活性远高于Raney Ni和Ni-B/SiO2非晶态催化剂,山梨醇的选择性接近于100%,显示出良好的工业化应用前景. 通过与晶态Ru-B/SiO2及Ru/SiO2的催化活性进行比较,并结合ICP,XRD,DSC,SEM,XPS及氢吸附等表征结果,初步讨论了非晶态合金结构和表面电子态对催化剂活性的促进作用.     

SiO2负载的Au-Ni双金属催化剂在乙炔选择加氢反应中的应用

负载型Au催化剂在乙炔选择加氢反应中表现出很高的乙烯选择性,但其转化率相对较低.通过添加第二种金属如Pd,Fe,Ag和Cu等,制备双金属催化剂是提高其在加氢反应中催化活性的一种非常有效的手段.其中Au-Pd双金属催化剂是最受关注的体系之一,Pd的加入可以非常显著地提高其催化乙炔选择加氢反应的活性.据文献报道,与Pd同一主族的Ni也具有较好的加氢活性.尽管与Pd相比,Ni很难与Au形成合金,但目前已有Au-Ni双金属催化剂在多种反应中表现出协同效应的报道,如水气变换、CO氧化以及芳香硝基化合物选择加氢等.因此,向Au催化剂中添加Ni也可能提高催化剂在乙炔选择加氢反应中的催化活性.因此,我们采用两步法制备了一系列SiO2负载的具有不同Ni:Au原子比的Au-Ni双金属催化剂,并将其用于乙炔选择加氢反应,发现Au-Ni双金属催化剂在该反应中表现出了显著的协同效应,其活性明显优于相应单金属催化剂的活性.尽管其乙烯选择性略低于单金属Au催化剂,但明显高于单金属Ni催化剂.通过调节还原温度和/或Ni:Au的比例,对催化剂的性能进行了优化.结果显示,当Ni:Au=0.5时,催化剂表现出最优的综合性能,即兼具较高的乙炔转化率和乙烯选择性.为了研究Au-Ni双金属催化剂中金属纳米粒子的结构、组成以及Au-Ni之间的相互作用,我们对催化剂进行了X射线衍射(XRD)、高分辨透射电镜(HRTEM)、能量散射谱(EDS)以及原位红外光谱(DRIFTS)表征.XRD和TEM结果显示,催化剂中的Au-Ni双金属纳米粒子都具有高分散和粒径均匀的特点.通过EDS分析,发现在Au-Ni双金属催化剂中的单个金属纳米粒子同时含有Au和Ni两种元素,尽管每个纳米粒子中Ni:Au的比例有差异.HRTEM结果发现,Au-Ni双金属纳米粒子的晶格间距介于Au(111)和Ni(111)的晶面间距之间,说明在Au-Ni双金属催化剂中有Au-Ni合金形成.原位DRIFTS结果显示,在Au-Ni双金属催化剂中,Au的存在促进了Ni的还原,说明Au与Ni之间存在紧密的相互作用.综上可见,Au和Ni在乙炔选择加氢反应中所表现出的协同效应主要归功于Au-Ni合金的形成,其中金属态Ni起主要的活性作用,而Au的存在则提高了催化剂的乙烯选择性.     

核-壳型白藜芦醇分子印迹微球研制及应用

以表面修饰乙烯基团的SiO2微球为基体,白藜芦醇为模板分子,丙烯酰胺(AA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,采用表面印迹技术制备核-壳型白藜芦醇印迹微球。采用红外光谱(IR)、扫描电子显微镜(SEM)对该分子印迹微球进行表征,结果表明,SiO2表面成功接枝一层厚度为200nm的印迹聚合物,该印迹微球颗粒分散均匀。采用高效液相色谱技术对印迹微球的吸附性进行研究表明,此印迹微球具有良好的识别性能,利用Scatchard模型分析得出印迹微球的最大吸附量分别为Qmax1=9.087mg/g和Qmax2=13.80mg/g。此印迹微球成功用于分离虎杖提取液中白藜芦醇。     

Molecularly imprinted polymers with synthetic dummy templates for the preparation of capsaicin and dihydrocapsaicin from chili peppers

In this work, dummy molecularly imprinted polymers with high selectivity and affinity to capsaicin and dihydrocapsaicin are designed using N‐vanillylnonanamide as a dummy template. The performance of dummy molecularly imprinted polymers and nonimprinted polymers was evaluated using adsorption isotherms, adsorption kinetics, and selective recognition capacity. Dummy molecularly imprinted polymers were found to exhibit good site accessibility, taking just 20 min to achieve adsorption equilibrium; they were also highly selective toward capsaicin and dihydrocapsaicin. We successfully used dummy molecularly imprinted polymers as a specific sorbent for selectively enriching capsaicin and dihydrocapsaicin from chili pepper samples. In a scaled‐up experiment, the selective recovery of capsaicinoids was calculated to be 77.8% using solid‐phase extraction. To the best of our knowledge, this is the first example of the use of N‐vanillylnonanamide as a dummy template in molecularly imprinted polymers to simultaneously enrich capsaicin and dihydrocapsaicin.     

Ni-Mo2N/SiO2复合纳米催化剂的制备及其对四氢萘加氢的催化活性

采用程序升温氮化法制备了Mo2N/SiO2,在此基础上负载Ni盐,制备了Ni-Mo2N/SiO2复合纳米催化剂,并考察了催化剂对四氢萘加氢的催化活性.结果表明,与Ni2Mo3N/SiO2及Ni/SiO2催化剂相比,Ni-Mo2N/SiO2复合催化剂具有较高的催化活性.采用"分离床"方法研究了Ni和Mo2N对四氢萘加氢活性的影响.通过X射线粉末衍射、透射电镜、氢吸附、元素分析和比表面积测定等技术对Ni-Mo2N/SiO2催化剂进行了表征.结果表明,与Ni/SiO2催化剂相比,Ni-Mo2N/SiO2复合催化剂中Ni的分散度并未提高;催化活性的提高归因于Ni与Mo2N在四氢萘加氢中的协同作用.氮化物的引入增加了芳烃吸附活性位的数目.提出了四氢萘在Ni-Mo2N/SiO2催化剂上的可能加氢机理.     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

电子束辐射聚合制备槲皮素-镍(Ⅱ)金属配位分子印迹聚合物及其识别性能研究

以电子束为辐照射线源,采用辐射聚合法成功制备了槲皮素-Ni(Ⅱ)金属配位分子印迹聚合物.通过紫外光谱研究了槲皮素与Ni(Ⅱ)之间的配位结构、配位作用方式及配位比,并按照1∶2的比例形成稳定配合物,同时也验证了槲皮素、Ni(Ⅱ)及功能单体甲基丙烯酸三者发生了金属配位印迹作用.利用红外光谱对产物的结构进行了表征.透射电镜、扫描电镜、吸附动力学实验分别考察辐射剂量对聚合物的微观形貌、吸附动力学性能的影响,结果表明辐射剂量对印迹聚合物的吸附性能有显著影响.同时选择性吸附实验结果显示该印迹聚合物对槲皮素-Ni(Ⅱ)配合物表现出明显的吸附选择性和特异性,最大结合量可达82.22μmol/g.对黄芩素和柚皮素的吸附选择性较差,分离因子分别为3.915和5.443.     

Investigation of enantiomer recognition of molecularly imprinted polymeric monoliths in pressurized capillary electrochromatography screening the amino acids and their derivatives

Molecularly imprinted monolithic columns were prepared for chiral separation of tyrosine and its amino acid derivatives by in situ therm-initiated copolymerization of methacrylic acid, 4-vinylpyridine and ethylene glycol dimethacrylate. The enantiomers were rapidly separated on monolithic columns in less than 10 min by pressurized capillary electrochromatography (pCEC). The influences of several parameters such as the content of cross-linking monomer on the composition of the pre-polymerization mixture were systematically investigated. The influence of the pCEC conditions including the composition of the mobile phase was also optimized to obtain the good enantioseparation. It was found that in addition to molecularly imprinted recognition, chromatographic retention and electrophoretic migration play important roles in the retention and chiral recognition of molecularly imprinted polymer (MIP) columns. The cross-selectivity for similar amino acids and its derivatives were systematical investigated for understanding the recognition mechanism on the MIP monolithic columns. The results indicated that molecularly imprinted polymer recognizes the template molecule by its molecular shape defined binding cavity.     

多壁碳纳米管表面过氧化苯甲酰印迹复合材料的制备及固相萃取应用

以过氧化苯甲酰(BOP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用热聚合法在多壁碳纳米管(MWNTs)表面制备印迹聚合物(MWNTs-MIPs)。采用红外和热重分析等技术对聚合物结构进行表征。采用液相色谱考察该分子印迹聚合物对过氧化苯甲酰的吸附特性。结果表明该印迹聚合物对过氧化苯甲酰表现出特异性吸附,该印迹聚合物对模板分子存在一种结合位点,其最大表观结合量为56.20 µmol/g。该印迹聚合物成功应用于固相萃取富集面粉中微量过氧化苯甲酰,浓度富集因子为526。     

2-异戊基环戊酮虚拟模板印迹微球的制备及其吸附性能

以2-异戊基环戊酮为虚拟模板,采用沉淀聚合法制备了粒径20~50 μm的分子印迹微球。 用傅里叶变换红外光谱(FTIR)和扫描电子显微镜(SEM)研究了分子印迹微球的表面化学特征及粒径分布,测试了印迹聚合物对玫瑰醚的吸附动力学、等温吸附性能及吸附选择性。 考察了分子印迹固相萃取玫瑰醚的应用效能。 结果表明:分子印迹聚合物(MIPs)对玫瑰醚的吸附可在25 min达到平衡,具有较快的吸附动力学,一级动力学模型更适合描述其吸附动力学行为。 Freundlich模型最适合描述MIPs对玫瑰醚的等温吸附行为,聚合物材料最大的印迹位点数目为149.3 μmol/g。 聚合物对玫瑰醚的平均吸附能为166 kJ/mol,表明主要为化学吸附。 虚拟模板印迹聚合物对玫瑰醚的选择因子相对于香叶醇和香茅醇分别为3.710和5.636,且对含玫瑰醚的混合物中的目标化合物仍具有较高的选择吸附能力(竞争吸附量为18.02 mg/g)。 在优化洗涤(1 mL乙腈+1 mL乙腈和水混合溶剂(体积比9.5:0.5)+2 mL乙腈、甲醇和水混合溶剂(体积比8:1:2)和洗脱(3 mL甲醇和醋酸混合溶剂(体积比9:1))条件下,通过分子印迹固相萃取可实现玫瑰醚的有效分离和富集,回收率为96.23%。     

对-特辛基酚表面印迹聚合物的制备及吸附性能评价

以对-特辛基酚为模板、甲基丙烯酸为功能单体制备了对-特辛基酚表面印迹聚合物.采用扫描电子显微镜、紫外光谱以及红外光谱对印迹聚合物进行表征,通过平衡吸附实验对聚合物的吸附性能进行评价.结果表明:该分子印迹聚合物对对-特辛基酚具有较大的吸附容量和良好的选择性,其最大吸附量Qmax约为86.12mg/g.     

FTIR studies of CO adsorption on Al2O3- and SiO2-supported Ru catalysts

The adsorption of CO on Al2O3- and SiO2-supported Ru catalysts has been investigated through FTIR spectroscopy. Deconvolution of the spectra obtained reveals the presence of 11 distinct bands in the case of Ru/Al2O3 and 10 bands in the case of Ru/SiO2, which were assigned to different carbonyl species adsorbed on reduced as well as partially oxidized Ru sites. Although most of these bands on both supports are similar, they exhibit substantial differences in terms of stability. In general, the analogous CO species on Ru/Al2O3 are adsorbed stronger than those on Ru/SiO2, with the most stable species observed being a dicarbonyl adsorbed on metallic Ru (i.e., Ru0(CO)2). Following sintering of the Ru, the ratio of multicarbonyl to monocarbonyl adsorption is reduced substantially because of the lack of isolated sites or small Ru clusters that enable the formation of multicarbonyl species via oxidative disruption. Finally, in the presence of O2, the main features observed correspond to monocarbonyl, dicarbonyl, and tricarbonyl species adsorbed on partially oxidized Run+. The intensities of all bands decrease drastically at temperatures above 210 degrees C because of the onset of CO oxidation, which results in substantially reduced surface coverage.