Synthesis of spinel lithium titanate anodes incorporated with rutile titania nanocrystallites by spray drying followed by calcination

Lithium insertion into spinel Li₄Ti₅O₁₂ incorporated with rutile TiO₂ was investigated in order to clarify the redox mechanism responsible for the first plateau at 1.5 V vs. Li/Li⁺. Spherical Li₄Ti₅O₁₂ powders with an average diameter of 2-3 μm can be achieved by spray drying followed by sintering process. The Li/Ti molar ratio in the precursor is selected as the factor for preparing spinel Li₄Ti₅O₁₂ powders with different concentrations of rutile TiO₂. The specific capacity from the first plateau at 1.5 V contributes to the major portion in the overall capacity. The rutile TiO₂ in spinel Li₄Ti₅O₁₂ anodes tends to improve the specific capacity at the first plateau. This can be attributed to two possible reasons: (i) rutile TiO₂ provides an additional number of sites (i.e., oxygen octahedral vacancy in rutile TiO₂) for the Li insertion, and (ii) less amount of residual Li oxides results in high electronic conductivity. The Li₄Ti₅O₁₂ anodes display high rate capability with low irreversible capacity, indicating good reversibility of insertion/de-insertion of Li ions. The results presented in this work show unambiguously that the presence of rutile TiO₂ in spinel Li₄Ti₅O₁₂ has a positive effect on the performance promotion of Li₄Ti₅O₁₂ anodes.     

Effects of Li/Ti ratios on the electrochemical properties of Li4Ti5O12 examined by time-resolved X-ray diffraction

Li₄Ti₅O₁₂ for anodic active material of lithium ion batteries is synthesized using different Li/Ti ratios of 3.5/5.0, 4.0/5.0 and 4.5/5.0 by a solid-state reaction between Li₂CO₃ and anatase TiO₂ at 850?°C. All samples contain a small amount of transformed rutile TiO₂ in the final Li₄Ti₅O₁₂, where the amount of rutile TiO₂ decreases with the increase in Li/Ti ratio. A stoichiometric Li₄Ti₅O₁₂ with Li/Ti = 4.0/5.0 shows a slightly larger particle size and higher charge capacity than those of Li-deficient and Li-excessive particles, while the discharging rate capability is shown to mainly depend on particle size regardless of Li/Ti ratio. According to the time-resolved X-ray diffraction patterns using a synchrotron source, however, no significant difference is found in spite of the difference in Li/Ti ratio, indicating the structural stability of Li₄Ti₅O₁₂ during the Li insertion and extraction process.     

Preparation and characteristics of Li4Ti5O12 with various dopants as anode electrode for hybrid supercapacitor

Spinel-Li₄Ti₅O₁₂ is successfully synthesized by a solid phase synthesis. The Li₄Ti₅O₁₂ powders with various dopants (Al³⁺, Cr³⁺, Mg²⁺) synthesized at 800 °C are in accordance with the Li₄Ti₅O₁₂ cubic spinel phase structure. The dopants are inserted into the lattice structure of Li₄Ti₅O₁₂ without causing any changes in structural characteristics. In order to study the effect on various dopants, the hybrid supercapacitor is prepared by using un-doped Li₄Ti₅O₁₂ and doped Li₄Ti₅O₁₂ in this work. The electrochemical performance of the hybrid supercapacitor is characterized by impedance spectroscopy and cycle performance. The results show Cr³⁺ and Mg²⁺ dopants enhance the conductivity of Li₄Ti₅O₁₂. Also, Al³⁺ substitution improves the reversible capacity and cycling stability of Li₄Ti₅O₁₂. It is found that effect of dopant on the electrochemical performance of Li₄Ti₅O₁₂ as electrode material for hybrid supercapacitor where the EDLC and the Li ion secondary battery coexist in one cell system.     

Effect of allied and alien ions on the EPR spectrum of Mn-containing lithium-manganese spinel oxides

Electron paramagnetic resonance spectroscopy was used for studying the effect of allied and alien ions on the EPR spectrum of Mn⁴⁺-containing lithium-manganese spinel oxides. Manganese spinel oxides with paramagnetic Mn⁴⁺ and diamagnetic substituents in the 16d spinel sites were studied: Li[Mg_0.5Mn_1.5]O₄, Li[Mg_0.5−xCo_2xMn_1.5−x]O₄, 0<x≤0.5, and Li[Li_1/3Mn_5/3]O₄. Ni²⁺-ions with integer-spin-ground state (S=1) were selected as alien ions: Li[Mg_0.5−xNi_xMn_1.5]O₄ (0≤x≤0.5), Li[Li_(1−2x)/3Ni_xMn_(5−x)/3]O₄ (0≤x≤0.5), and Li[Ni_0.5Mn_1.5−yTi_y]O₄ (0≤y≤1.0). It was shown that in Ni-substituted oxides the low temperature EPR response comes from magnetically correlated Ni-Mn spins, while at high registration temperature Mn⁴⁺ ions give rise to the EPR profile. Analysis of the EPR line width allows differentiating between the contributions of the density of paramagnetic species and the strength of the exchange interactions in magnetically concentrated systems. The density of allied and alien paramagnetic species has no effect on the EPR line width in cases when the strengths of antiferro- and ferromagnetic interactions on an atomic site are close. On the contrary, when antiferro- or ferromagnetic interactions on an atomic site are dominant, the EPR line width increases with the density of paramagnetic species.     

Effects of dopant on the electrochemical properties of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> anode materials

The effects of dopant on the electrochemical properties of spinel-type Li_3.97M_0.1Ti_4.94O₁₂ (M = Mn, Ni, Co) and Li_(4-x/3)Cr_xTi_(5-2x/3)O₁₂(x = 0.1, 0.3, 0.6, 0.9, 1.5) were systematically investigated. Charge-discharge cycling were performed at a constant current density of 0.5 mA/cm² between the cut-off voltages of 3.0 and 1.0 V, the experimental results showed that Cr³⁺ dopant improved the reversible capacity and cycling stability over the pristine Li₄Ti₅O₁₂. The substitution of the Mn³⁺ and Ni³⁺ slightly decreased the capacity of the Li₄Ti₅O₁₂. Dopants such as Co³⁺ to some extent worsened the electrochemical performance of the Li₄Ti₅O₁₂.     

尖晶石铁氧体TixNi1-xFe2O4中阳离子分布和Ti离子磁矩的实验研究

采用固相反应法制备了系列样品Ti_xNi_1-xFe₂O₄ (x=0.0, 0.1, 0.2, 0.3, 0.4). 室温下的X射线衍射谱表明样品全部为(A)[B]₂O₄型单相立方尖晶石结构, 属于空间群Fd3m. 样品的晶格常数随Ti掺杂量的增加而增大. 样品在10 K温度下的比饱和磁化强度σ_S随着Ti掺杂量x的增加逐渐减小. 研究发现, 当Ti掺杂量x≥ 0.2时, 磁化强度σ随温度T的变化曲线出现两个转变温度T_L和T_N. 当温度低于T_N时, 磁化强度明显减小; 当温度达到T_N时, dσ/dT具有最大值. σ-T曲线的这些特征表明, 由于Ti掺杂在样品中出现了附加的反铁磁结构. 这说明样品中的Ti离子不是无磁性的+4价离子, 而是以+2和+3价态存在, 其离子磁矩的方向与Fe和Ni离子的磁矩方向相反. 利用本课题组提出的量子力学方势垒模型拟合样品在10 K温度下的磁矩, 得到了Ti, Fe和Ni三种阳离子在(A)位和[B]位的分布情况, 并发现在所有掺杂样品中, 80%的Ti离子以+2价态占据尖晶石结构的[B]位.     

Structural and electrochemical study on Li(Li1/3Ti5/3)O4 anode material for lithium ion batteries

Chemical and electrochemical studies have shown that various titanium oxides can incorporate lithium in different ratios. Other compounds with a spinel-type structure and corresponding to the spinel oxides LiTi₂O₄ and Li₄Ti₅O₁₂ have been evaluated in rechargeable lithium cells with promising features. The spinel Li[Li_1/3Ti_5/3]O₄ [1–5] compound is a very appealing electrode material for lithium ion batteries. The lithium insertion-deinsertion process occurs with a minimal variation of the cubic unit cell and this assures high stability which may reflect into long cyclability. In addition, the diffusion coefficient of lithium is of the order of 10⁻⁸ cm²s⁻¹ [5] and this suggests fast kinetics which may reflect in high power capabilities. In this work we report a study on the kinetics and the structural properties of the Li[Li_1/3Ti_5/3]O₄ intercalation electrode carried out by: cyclic voltammetry, galvanostatic cycling and in-situ X-ray diffraction. The electrochemical characterization shows that the Li[Li_1/3Ti_5/3]O₄ electrode cycles around 1.56 V vs. Li with a capacity of the order of 130 mAhg⁻¹ which approaches the maximum value of 175 mAhg⁻¹ corresponding to the insertion of 1 equivalent per formula unit. The delivered capacity remains constant for hundred cycles confirming the stability of the host structure upon the repeated Li insertion-deinsertion process. This high structural stability has been confirmed by in situ Energy Dispersion X-ray analysis. Paper presented at the 7th Euroconference on Ionics, Calcatoggio, Corsica, France, Oct. 1–7, 2000.     

Pr-modified Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> nanofibers as an anode material for lithium-ion batteries with outstanding cycling performance and rate performance

Pr-doped Li₄Ti₅O₁₂ in the form of Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0, 0.01, 0.03, 0.05, and 0.07) was synthesized successfully by an electrospinning technique. ICP shows that the doped samples are closed to the targeted samples. XRD analysis demonstrates that traces of Pr³⁺ can enlarge the lattice parameter of Li₄Ti₅O₁₂ from 8.3403 to 8.3765 Å without changing the spinel structure. The increase of lattice parameter is beneficial to the intercalation and de-intercalation of lithium-ion. XPS results identify the existence form of Ti is mainly Ti⁴⁺ and Ti³⁺ in minor quantity in Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0.05) samples due to the small amount of Pr³⁺. The transition from Ti⁴⁺ to Ti³⁺ is conducive to the electronic conductivity of Li₄Ti₅O₁₂. FESEM images show that all the nanofibers are well crystallized with a diameter of about 200 nm and distributed uniformly. The results of electrochemical measurement reveal that the 1D Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0.05) nanofibers display enhanced high-rate capability and cycling stability compared with that of undoped nanofibers. The high-rate discharge capacity of the Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0.05) samples is excellent (101.6 mAh g^?1 at 50 °C), which is about 58.48 % of the discharge capacity at 0.2 °C and 4.3 times than that of the bare Li₄Ti₅O₁₂ (23.5 mA g^?1). Even at 10 °C (1750 mA g^?1), the specific discharge capacity is still 112.8 mAh g^?1 after 1000 cycles (87.9 % of the initial discharge capacity). The results of cyclic voltammograms (CV) and electrochemical impedance spectroscopy (EIS) illustrate that the Pr-doped Li₄Ti₅O₁₂ electrodes possess better dynamic performance than the pure Li₄Ti₅O₁₂, further confirming the excellent electrochemical properties above.     

Lithium ion conductivity of the B-site substitution in Li3xLa0.67−xRE y III Ti1−2yPyO3 system (REIII=Sc3+, Y3+, Nd3+, Sm3+, Eu3+, Yb3+)

The B-site substituted perovskite solid solution systems Li_3xLa_0.67−xRE_yTi_1−2yP_yO₃ (RE=Sc, Y, Nd, Sm, Eu, Yb) have been investigated. Perovskite solid solutions formed in the range of x=0.10, y<0.10 for RE=Sc³⁺, Y³⁺, Yb³⁺, x=0.10, y≤0.05 for RE=Nd³⁺, Sm³⁺, Eu³⁺. Li_0.3La_0.57Nd_0.05Ti_0.9P_0.05O₃ has the highest bulk conductivity of 4.31×10⁻⁴ S·cm⁻¹ and the highest total conductivity of 2.52×10⁻⁴ S·cm⁻¹ at room temperature in all prepared compositions. The compositions have low activation energies of about 24–30 kJ/mol in the temperature ranges of 298–523 K. SEM studies showed that the sample made by solid-state reaction has a sphere-like morphology and a rough particle with particle size of about 50 μm. The research results also indicated that the reaction temperature decreases and the electrochemical stabilities of the titanate-based perovskite-type solid solutions are improved by using RE³⁺ and P⁵⁺ replaced Ti⁴⁺ on B-site in the Li_3xLa_0.67−xTiO₃ parent.     

Electrochemical properties of stacked-nanoflake Li4Ti5O12 spinel synthesized by a polymer-pyrolysis method

Stacked-nanoflake Li₄Ti₅O₁₂ spinel was synthesized via the pyrolysis of a Li–Ti copolymeric precursor formed by in situ polymerization of LiOH and [Ti(OC₄H₉)₄] and acrylic acid. XRD and SEM characterization shows that the powders calcined at 700 °C for 3 h was well-crystallized particles with submicron diameter. Charge–discharge measurement showed the Li₄Ti₅O₁₂ electrode had displayed excellent rate capability and delivered reversible capacity of 171, 158, 148, 138 and 99 mAh g⁻¹ at rates of 0.1C, 0.5C, 1C, 2C and 4C, respectively. The test electrode also showed excellent cyclability as the capacity retains 96.1% after 60 cycles between 0.5 and 2.5 V.     

A new composite material Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>–SnO<Subscript>2</Subscript> for lithium-ion batteries

A new Li₄Ti₅O₁₂–SnO₂ composite anode material for lithium-ion batteries has been prepared by loading SnO₂ on Li₄Ti₅O₁₂ to obtain composite material with improved electrochemical performance relative to Li₄Ti₅O₁₂ and SnO₂. The composite material was characterized by X-ray diffraction and scanning electron microscopy. The results indicated that SnO₂ particles have encapsulated on the surface of the Li₄Ti₅O₁₂ uniformly and tightly. Electrochemical results indicated that the Li₄Ti₅O₁₂–SnO₂ composite material increases the reversible capacity of Li₄Ti₅O₁₂ and has good cycling reliability. At a current rate of 0.5 mA/cm², the material delivered a discharge capacity of 236 mAh/g after 16 cycles. It suggests the existence of synergistic interaction between Li₄Ti₅O₁₂ and SnO₂ and that the capacity of the composite is not a simple weighted sum of the capacities of the individual components. In the composite material, SnO₂ can act as a bridge between the spinel particles to reduce the interparticle resistance and as a good material for the Li intercalation/deintercalation. Thus, electrochemical performance of the Li₄Ti₅O₁₂ spinel can be improved by the surface modification with SnO₂, and the stability of Li₄Ti₅O₁₂ also serves to buffer the internal stress caused by the volume changes in lithium insertion and extraction reactions.     

Electrospinning preparation of one-dimensional Co<Superscript>2+</Superscript>-doped Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> nanofibers for high-performance lithium ion battery

One-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofibers with a diameter of approximately 500 nm have been synthesized via a one-step controllable electrospinning method. The Co²⁺-doped Li₄Ti₅O₁₂ nanofibers were systematically characterized by XRD, ICP, TEM, SEM, BET, EDS mapping, and XPS. Based on the cubic spinel structure and one-dimensional effect of Li₄Ti₅O₁₂, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers exhibit the enlarged lattice volume, reduced particle size and enhanced electrical conductivity. More importantly, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers as a lithium ion battery anode electrode performs superior electrochemical performance than undoped Li₄Ti₅O₁₂ electrode in terms of electrochemical measurements. Particularly, the reversible capacity of Co²⁺-doped Li₄Ti₅O₁₂ electrode reaches up to 140.1 mAh g^?1 and still maintains 136.5 mAh g^?1 after 200 cycles at a current rate of 5 C. Therefore, one-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofiber electrodes, showing high reversible capacity and remarkable recycling property, could be a potential candidate as an anode material.     

Superconductivity of LiTi2O4 and related systems

New experimental results are reported on spinel LiTi₂O₄, and the related mixed valent systems Li_1+x Ti_2–x O₄ and Li_1–x Mg _x Ti₂O₄ characterized by distinct Ti³⁺/Ti⁴⁺ ratios (<1 in the former and >1 in the latter). Specific heat data and transport properties show the high quality of the samples prepared by new routes. It is emphasized that, as far the specific heat data are concerned, the stoichiometric compound (withT _c =12.4 K) satisfies BCS predictions in the weak coupling limit. Conversely, the mechanism of superconductivity is shown to be more complex when off-stoichiometric compouds are considered, due to the vicinity of metal-insulator transition. It is to be noted that the disappearance of sizable superconductivity occurs for 0.12<x<0.18, but the insulator features are only reached forx=1/3.     

Calculation of chemical bonds and diffusion path of Li ion in (LaLi)Ti2O6 by DV-Xα cluster method

The chemical bonds and lithium diffusion of La_4/3−y Li_3y Ti₂O₆ (y = 0.21) were investigated by using the DV-Xα cluster method. The cluster model used is the formula La₈Li₂Ti₂O₁₁. A Li ion was moved on the ab plane at z = 1/2. The Na ion was moved along the x axis in the cluster model La₈Na₂Ti₂O₁₁ for comparison. The total bond overlap population (BOP) between the moving Li ion and the other ions was calculated on the ab plane at z = 1/2. The total BOP of the Li ion along the x axis increased near the oxygen ion site, whereas the BOP of the Na ion decreased. The decrease in total BOP indicates the decrease in covalent interaction between the Na and the other ions. The change of the net charge of the Li ion was almost the same as that of the Na ion. This suggests that the smaller change of covalent interaction in the mobile Li ion determines the diffusion path of Li ion.     

Synthesis and electrochemical performances of Li4Ti4.95Al0.05O12/C as anode material for lithium-ion batteries

Spinel compounds Li₄Ti_5−xAl_xO₁₂/C (x=0, 0.05) were synthesized via solid state reaction in an Ar atmosphere, and the electrochemical properties were investigated by means of electronic conductivity, cyclic voltammetry, and charge-discharge tests at different discharge voltage ranges (0-2.5 V and 1-2.5 V). The results indicated that Al³⁺ doping of the compound did not affect the spinel structure but considerably improved the initial capacity and cycling performance, implying the spinel structure of Li₄Ti₅O₁₂ was more stable when Ti⁴⁺ was substituted by Al³⁺, and Al³⁺ doping was beneficial to the reversible intercalation and deintercalation of Li⁺. Al³⁺ doping improved the reversible capacity and cycling performance effectively especially when it was discharged to 0 V.     

Spinel-type solid solutions involving Mn and Ti:Crystal chemistry, magnetic and electrochemical properties

This study reports the structural and magnetic properties of spinel systems Li₄Mn_5−xTi_xO₁₂ (“4-5-12” series) and LiNi_0.5Mn_1.5−xTi_xO₄ (“LNMTO” series), both based on Mn⁴⁺ substitution by Ti⁴⁺. Intermediate compositions covering the whole range of compositions (0≤x≤5 and 0≤x≤1.5, respectively) were prepared by solid state reaction. The 4-5-12 system forms a continuous spinel solid solution, whereas the spinel phase range in LNMTO stops before the end member “LiNi_0.5Ti_1.5O₄”, which is multi-phased with a major hexagonal phase component. Cell parameters and (Mn,Ti)-O distances increase monotonically with titanium content in both series. In the LNMTO series, the end member LiNi_0.5Mn_1.5O₄ is known to form a superstructure with Ni/Mn cation ordering. Neutron diffraction and Raman spectroscopy show that this order is lost when Ti is substituted, even at low level (x=0.15). The LNMTO crystal chemistry is also complicated by the presence of partial cation inversion, and the presence of a secondary rocksalt-type phase that modifies the spinel stoichiometry. Magnetic properties are characterized by a competition between ferromagnetic and antiferromagnetic interactions; no magnetic ordering is achieved, in agreement with B-site cation frustration and disorder. Electrochemical measurements show that the Ti^3+/4+ and Mn^3+/4+ redox couples behave independently in the 4-5-12 series, and that titanium decreases the high-potential electrochemical redox activity of LNMTO because of its blocking character for electron transfer to and from the nickel sites in the spinel structure.     

Calculation of 7Li MAS NMR chemical shift in La4/3−yLi3yTi2O6

The chemical shifts of ⁷Li MAS nuclear magnetic resonance spectra in La_4/3−yLi_3yTi₂O₆ (LLTO) showed negative values and decreased with increasing lithium concentration. The chemical shifts were interpreted by Pople’s theory in which the ⁷Li chemical shifts were due to the local paramagnetic currents of the closest oxygen ions. Lattice parameters and coordination of oxygen were obtained by Rietveld analysis of X-ray diffraction data. The gross population and electron excitation energy were calculated by DV-Xα method.     

Enhanced cyclability of triple-metal-doped LiMn2O4 spinel as the cathode material for rechargeable lithium batteries

To improve the cycle performance of spinel LiMn₂O₄ as the cathode of 4-V-class lithium secondary batteries, spinel phases LiM _x Mn_2 − x O₄ (M=Li, Fe, Co; x = 0, 0.05, 0.1, 0.15) and LiFe_0.05M _y Mn_{1.95 − y} O₄ (M=Li, Al, Ni, Co; y = 0.05, 0.1) were successfully prepared using the sol–gel method. The spinel materials were characterized by powder X-ray diffraction (XRD), elemental analysis, and scanning electron microscopy. All the samples exhibited a pure cubic spinel structure without any impurities in the XRD patterns. Electrochemical studies were carried out using the Li|LiM _x Mn_2 − x O₄ (M=Li, Fe, Co; x = 0, 0.05, 0.1, 0.15) and LiFe_0.05M _y Mn_{1.95 − y} O₄ (M=Li, Al, Ni, Co; y = 0.05, 0.1) cells. These cathodes were more tolerant to repeated lithium extraction and insertion than a standard LiMn₂O₄ spinel electrode in spite of a small reduction in the initial capacity. The improvement in cycling performance is attributed to the stabilization in the spinel structure by the doped metal cations.     

Structural characterization for the chemically Li ion extracted LiyCoO2, LiyCo0.95Ga0.05O2, and LiyCo0.9Ga0.1O2 compounds

Chemical Li ion extraction processes have been carried out for pristine LiCoO₂, LiCo_0.95Ga_0.05O₂, and LiCo_0.9Ga_0.1O₂ compounds by swirling them in 0.35 M H₂SO₄ solution. It is confirmed from XRD patterns that the compounds maintain the two-dimensional framework with pristine-type structure even after the acid treatment up to 12 h. The Ga-substituted compounds keep Li ions for longer time on the acid treatment rather than the LiCoO₂. The average oxidation state of Co ions increases with the Li⁺ ion extraction time up to 3.45+. The local structure refinements for the chemically Li⁺ ion extracted compounds have been investigated by Co K-edge X-ray absorption spectroscopy. The extraction causes the increase of Debye-Waller (DW) factor or static disorder around the Co ion. The DW factor of the Co-Co bond pair less increases with the extraction time for the Li_yCo_0.95Ga_0.05O₂, and Li_yCo_0.9Ga_0.1O₂ compounds than that for the LiCoO₂. The Ga-substituted compounds are more stable against acid treatments than the LiCoO₂, since more basic Ga³⁺ ion retards the structural distortion of the CoO₆ octahedra against the Li ion extraction.     

The effect of doping LiMn2O4 spinel on its use as a cathode in Li-ion batteries: neutron diffraction and electrochemical studies

A series of compounds Li_1+yMn_2−xM′_xO₄ (x≤0.1;y≤0.02), have been synthesised by doping the parent LiMn₂O₄ spinel with various metal ions of variable oxidation state. Powder neutron diffraction data has been collected on these samples alongside a series of electrochemical experiments in order to elucidate the relationship between structure on the performance of these systems as Li batteries. Doping the LiMn₂O₄ spinel with a small amount of metal ions has a remarkable effect on the electrochemical properties. Whereas the capacity of the spinels doped with trivalent ions is much greater, the cycling fading properties are much enhanced with using divalent ions as dopants. The underlying reasons for this are discussed, and it is suggested that the occupancy of the tetrahedral site with divalent ions to form a more compact structure offers an improved structural stability to support greater Li insertion/extraction, but which ultimately prevents the free movement of Li also sited on the tetrahedral site of the lattice.