Binding of butyl orange by poly(2-dimethylaminoethyl methacrylate) and copolymers of 2-dimethylaminoethyl methacrylate and N-vinyl-2-pyrrolidone: Peculiar temperature dependence of the binding

The temperature dependence of the binding of butyl orange by a homopolymer of 2-dimethylaminoethyl methacrylate (DMAEMA) and copolymers of DMAEMA and N-vinyl-2-pyrrolidone (VPy) has been examined at various pH's. The binding is very much dependent upon the temperature of the system, the pH of the binding medium, and the DMAEMA content in the polymer. In this case maximal binding is obtained at approximately 15–25° in the temperature range measured, although in most cases which have been examined, the degree of binding increases steadily with increasing temperature. This peculiar temperature dependence of the binding becomes more pronounced as the pH and the DMAEMA content are increased. The appearance of the peculiarity is discussed in terms of the pH-induced conformational changes of the polymer and the hydrophobicity of the polymer.     

Binding of methyl orange and the hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate,by 2-dialkylaminoethyl methacrylate-N-vinyl-2-pyrrolidone and related copolymers

The copolymers of N-vinyl-2-pyrrolidone and 2-dimethylaminoethyl methacrylate, 2-diethylaminoethyl methacrylate, 2-dimethylaminoethyl acrylate, or 2-dimethylaminopropyl acrylamide have been prepared. Studies were made of the binding of a “binding probe,” methyl orange, by the copolymers in aqueous solution. The first binding constants accompanying the binding were evaluated. Furthermore, the intensity of fluorescence of a hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate, in the presence of these polymers was investigated. The nature and phenomena of dye binding and hydrophobic fluorescent probe binding with the polymers are discussed.     

Amphiphilic copolymers with increased affinity for substrates

The copolymers of methyl quaternized 2-dimethylaminoethyl acrylate and styrene, 2-vinyl naphthalene, acrylic acid iso-octyl ester, or acrylic acid n-butyl ester have been prepared. Studies were made of the binding of a “binding probe,” methyl orange, by the copolymers in aqueous solution. The first binding constants and the thermodynamic parameters in the course of the binding were evaluated. Furthermore, the intensity of fluorescence of a hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate, in the presence of these polymers was investigated. In addition, the fluorescence spectra of monomer and excimer emissions of the polymers with aromatic residues were measured. The excimer/monomer fluorescence intensity ratio was studied in the presence of various additives such as methyl orange, urea, methanol, and NaCl to gain an insight into the nature of microdomains in the polymer. The nature and phenomena of dye binding and hydrophobic fluorescent probe binding with the polymers are discussed. © 1993 John Wiley & Sons, Inc.     

Cross-linked polyvinylpyrrolidones with increased affinity and specificity for methyl orange and its homologs

Polyvinylpyrrolidones of various degrees of cross-linkage have been prepared by radical polymerization of N-vinylpyrrolidone with methylenebisacrylamide to regulate the fraction of cross-linkage. The insoluble polymers obtained were examined for their ability to bind methyl orange and its homologs, methyl orange, ethyl orange, propyl orange, and butyl orange at 5, 15, 25, and 35°C, respectively, in an aqueous solution. The first binding constants and the thermodynamic parameters that accompanied the binding were calculated. For any particular dye the extent of binding, the absolute magnitude of ΔF°, and the value of ΔS° increased as the degree of cross-linkage increased, starting with water-soluble polyvinylpyrrolidone (zero cross-linkage) and proceeding to the polymer with high cross-linking density. This behavior can be accounted for in terms of more extensive hydrophobic domains in the cross-linked polymeric matrix that enhances hydrophobic interactions in the binding process. Moreover, the cross-linked macromolecule polymerized in the presence of methyl orange and then stripped of the bound methyl orange shows substantially stronger binding for this small molecule than the polymer cross-linked in the absence of methyl orange. In contrast, the cross-linked polymer prepared similarly in the presence of the larger molecule, butyl orange, exhibits decreased affinity toward the smaller consolute, methyl orange, than either of the other polymers described. It seems, therefore, that the polymeric matrix provides favorable binding sites or pockets that can accommodate a specific small molecule. The preparative procedure, which uses a small-molecule template, molds into the polymer some structural specificity in the binding of small molecules.     

Binding the hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate,by polycations that contain apolar pendant groups: Equilibrium dialysis and fluorescence measurements

The thermodynamic parameters for the interaction of the hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate (TNS), and polycations that contain a piperidinium cation and various nonpolar pendant groups were calculated. Binding is exothermic and involves a positive entropy gain. The contribution of the entropy term to the free energy change tends to increase with increasing hydrophobicity of the polymers. The intensity of the fluorescence of TNS is enhanced when the probe binds to the polycations. The nature and phenomena of hydrophobic fluorescent probe binding with the polymers are discussed.     

Binding of methyl orange and its homologs by polyion complexes in aqueous solution

Polyion complexes of sodium poly(methacrylate) and piperidinium cationic polymers [I], which are insoluble in water and have an equal number of positive and negative charges, bind organic anions (methyl orange, ethyl orange, propyl orange, butyl orange, and pentyl orange) in aqueous solution. The strength of the binding is enhanced by an increase in the hydrophobicity of the polyion complex and the small cosolute. Moreover, strong cooperative interactions appear with increased uptake of the small molecule. Urea and an inorganic electrolyte (KCl) were examined for their effect on the binding, the amount of which is strongly suppressed by these additives. The significance of hydrophobic and electrostatic interactions which accompany the binding is described.     

Peculiar temperature dependence of the binding of methyl orange and its homologs by 2-diethylaminoethyl methacrylate-N-vinyl-2-pyrrolidone copolymers

2-Diethylaminoethyl methacrylate (DEAEMA)–N-vinyl-2-pyrrolidone (VPy) copolymers of various compositions have been synthesized. The resultant copolymers were examined for their ability to bind methyl orange and its homologs, in particular butyl orange, at 5, 15, 25, and 35°C in aqueous solutions. The amount of binding of butyl orange is much higher with the copolymers than with polyvinylpyrrolidone or with 2-hydroxyethyl methacrylate–N-vinyl-2-pyrrolidone copolymers. Introduction of only 3% of the hydrophobic DEAEMA residue increases markedly the binding affinity toward the cosolute. Maximal binding is obtained at 15°C in the temperature range measured. This peculiar temperature dependence of the extent of binding is explicable on the basis of hydrophobic effects involved in this binding. The peculiar temperature dependence disappeared in aqueous solution of NaSCN which acts as a water-structure breaker: the extent of binding changes regularly with temperature. This is interpretable only in terms of reduction of hydrophobic contribution to the binding. With propyl orange, which is a less hydrophobic cosolute than butyl orange, the peculiarity of the binding was not detected.     

On the photostability of some blue-emitting derivatives of 2-aminoterephthalic acid and their copolymers with methyl methacrylate

The photostability of eight blue-emitting derivatives of 2-aminoterephthalic acid, three of them containing a stabilizer residue in their molecule in dimethylformamide was investigated. Copolymerisation of methyl methacrylate with four of them, monomer compounds and whitening of methyl methacrylate “in mass” with one of the compounds was accomplished. The copolymers obtained have an intense stable to solvents fluorescence. Photostability of the compounds, thus included in the polymer chain increased. The influence of the luminophores on the photostability of the inherently and whitened “in mass” polymers was established.     

A tracer study of the hydrolysis of methyl methacrylate and methyl acrylate units in homopolymers and copolymers

Homopolymers and copolymers were prepared from methyl methacrylate, methyl acrylate, and styrene by radical reactions at 60°C. Monomers suitably labeled with carbon-14 were used so that it was possible to monitor the hydrolysis of ester groups in the polymers during treatment under alkaline conditions. It was found that methyl acrylate units were hydrolyzed completely whatever their environment in a polymer chain. Under the same conditions only about 9% of the ester groups in a homopolymer of methyl methacrylate reacted; the proportion was increased by the introduction of comonomer units into the polymer chain. For copolymers of methyl methacrylate with methyl acrylate the extent of reaction may be correlated with the lengths of the sequences of methyl methacrylate units.     

Branching of anionic poly(methyl methacrylate)

A viscometric determination of the degree of branching γ, of poly(methyl methacrylate) obtained by anionic polymerization proved the reaction of the growing center of poly(methyl methacrylate) with the ester group of another polymer molecule, accompanied by the formation of a trifunctional branch point. This reaction occurs if the solution polymerization of methyl methacrylate is initiated: (1) with butyllithium at ?78°C only on attaining 100% conversion and after a long time or at +20°C immediately after the polymerization has set in; (2) with lithium tert-butoxide at +20°C after a long time. The degree of branching of poly(methyl methacrylates) obtained under similar conditions in the presence of tetrahydrofuran reaches higher values than for polymers prepared in toluene. The tacticity of polymers does not affect the experimentally determined γ values.     

pH-thermosensitive behavior of N,N-dimethylaminoethyl methacrylate (Co)polymers with N-vinylcaprolactam

The effect of acidity of a medium on the phase separation temperature and the intensity of light scattering for dispersions produced by heating of aqueous solutions of N,N-dimethylaminoethyl methacrylate, N-vinylcaprolactam, and their copolymers has been studied. It has been demonstrated that the phase separation temperature and the turbidity of polyvinylcaprolactam (and vinylcaprolactam-enriched copolymers) solutions are pH-independent. Poly(N,N-dimethylaminoethyl methacrylate) (and N,N-dimethylaminoethyl methacrylateenriched copolymers) exhibits temperature sensitivity only in the alkaline region, and the phase separation temperature and turbidity versus pH plots are described by curves with maxima. The addition of sodium dodecyl sulfate to polymer solutions in the general case causes an increase in the phase separation temperature. However, if positive charges occur on macromolecules (in initial solutions of poly(N,N-dimethylaminoethyl methacrylate) or acidified solutions of polyvinylcaprolactam), the increase in the phase separation temperature is preceded by its decrease owing to the electrostatic interaction of surfactant anions with cationic centers. As acid is introduced into the H₂O-sodium dodecyl sulfate-polyvinylcaprolactam ternary system, the phase separation temperature of the polyvinylcaprolactam-dodecyl sulfate complex is decreased.     

Fluorescence probes for polymerization reactions: Bulk polymerization of styrene,n-butyl methacrylate,ethyl methacrylate,and ethyl acrylate

Julolidine malononitrile 3 was used as a fluorescent probe for high-conversion (free-radical) bulk polymerization of methyl methacrylate, ethyl methacrylate, n-butyl methacrylate, ethyl acrylate, styrene, and the copolymerization of styrene/n-butyl methacrylate. The fluorescence of the probe increased gradually as polymer conversion increased. This was followed by an abrupt rise in fluorescence intensities by a factor of 3 to 40 depending on the polymer formed. Finally the fluorescence intensities leveled off as the polymer limiting conversion was reached. The polymerization region in which fluorescence intensity increases sharply seems to correspond to the increase of the rigidity of the medium at the glass transition. A correlation between the limiting quantum yield of fluorescence of the dye and the polymer glass transition T_g and expansion coefficient α was found. These results were interpreted in terms of rotation-dependent nonradiative decay which links the excited-state conformation to the rigidity of the medium.     

Adsorption of PEO-PPO-PEO triblock copolymers with end-capped cationic chains of poly(2-dimethylaminoethyl methacrylate)

We study the adsorption of a symmetric triblock copolymer of ethylene oxide, EO, and propylene oxide, PO, end-capped with quarternized poly(2-dimethylaminoethyl methacrylate), DMAEMA (DMAEMA(24)-EO(132)PO(50)EO(132)-DMAEMA(24)). Light scattering and tensiometry are used to measure the relative size of the associated structures and surface excess at the air-liquid interface. The adsorbed amount, the amount of coupled water, and the viscoelasticity of the adsorbed polymer layer are measured on hydrophobic and hydrophilic surfaces (polypropylene, cellulose, and silica) by using quartz crystal microgravimetry (QCM) and surface plasmon resonance (SPR) at different ionic strengths and temperatures. The results of the experiments are compared with those obtained after adsorption of the uncharged precursor copolymer, without the cationic end-caps (EO(132)PO(50)EO(132)). DMAEMA(24)-EO(132)PO(50)EO(132)-DMAEMA(24) possesses higher affinity with the negatively charged silica and cellulose surfaces while the uncharged copolymer adsorbs to a larger extent on polypropylene surfaces. In this latter case, adsorption increases with increasing solution ionic strength and temperature. Adsorption of EO(132)PO(50)EO(132) on silica surfaces has little effect on the water contact angle (WCA), while adsorption of DMAEMA(24)-EO(132)PO(50)EO(132)-DMAEMA(24) increases the WCA of silica to 32°, indicating a large density of exposed PPO blocks upon adsorption. After adsorption of EO(132)PO(50)EO(132) and DMAEMA(24)-EO(132)PO(50)EO(132)-DMAEMA(24) on PP, the WCA is reduced by ≈14° and ≈28°, respectively, due to the exposed hydrophilic EO and highly water-soluble DMAEMA segments on the surfaces. The extent of surface coverage at saturation at the polypropylene/liquid interfaces (≈31 and 40 nm(2)/molecule obtained by QCM and SPR, respectively) is much lower, as expected, when compared with results obtained at the air/liquid interface, where a tighter packing is observed. The percentage of water coupled to the adsorbed cationic polymer decreases with solution ionic strength. Overall, these observations are ascribed to the effects of electrostatic screening, polymer hydrodynamic size, and solvency.     

Peculiar temperature dependence on the binding of methyl orange and its homologs by 2-hydroxyethyl methacrylate-N-vinyl-2-pyrrolidone copolymers

2-Hydroxyethyl methacrylate (HEMA)-N-vinyl-2-pyrrolidone (VPy) copolymers of various compositions have been prepared. The copolymers obtained were examined for their ability to bind a homologous series of methyl orange derivatives, methyl orange, ethyl orange, propyl orange, and butyl orange, at 5, 15, 25, and 35°C, respectively, in an aqueous solution. The first binding constants and the thermodynamic parameters that accompanied the binding were evaluated. The binding ability of the copolymer for the small cosolute was enhanced with an increase of the HEMA content in the copolymer. Moreover, a bell-shaped curve appeared in the binding of butyl orange by the copolymers having higher HEMA residues when the first binding constant was plotted as a function of temperature, whereas no such phenomenon was detected for the copolymers with less HEMA content or for the less hydrophobic dye, methyl orange, ethyl orange, or propyl orange. This peculiar temperature dependence of the first binding constant shows that the enthalpy of the binding varies from a positive (unfavorable) value below ca. 15°C to a negative (favorable) one above this temperature. This behavior can be accounted for in terms of more hydrophobic effects involved in the binding process.     

Interactions of water-soluble polymers with small molecules II: Poly(2-diethylaminoethyl methacrylate)-methyl orange and its homolog systems at different temperatures

In order to investigate the interactions of poly(2-diethylaminoethyl methacrylate) (PDEAEMA) with methyl orange and its homologs in solution, temperature dependence of the complex formation has been examined in detail by the measurements of transmittance and specific conductance for the systems. Furthermore, the binding course of dyes to PDEAEMA has been studied on the basis of thermodynamic parameters obtained from equilibrium dialysis experiments at different temperatures. It was observed that the flocculation process shifted to lower dye concentrations in accordance with increasing hydrophobicity of the dyes in the order, methyl orange < ethyl orange < butyl orange, and the process of complex formation was characterized by three separate regions according to the slope of specific conductivity-mixing ratio curve for mixtures of PDEAEMA and dye. The temperature dependences of F,H and S suggest that, for dyes-PDEAEMA complex formation, the hydrophobic interaction is predominant at a low temperature but the electrostatic interaction becomes important as the temperature increases.     

Conformational properties of isotactic poly(2-hyroxyethyl methacrylate) in the mixed water-alcohol solvents

Conformational properties of isotactic poly(2-hydroxyethyl methacrylate) (PHEMA) have been studied in mixtures of water and several aliphatic alcohols by viscometry and fluorometry. The highest fluorescence intensity of auramine has been detected in aqueous isotactic PHEMA solution compared with several aliphatic alcohol systems. Upon aliphatic alcohol addition, there was the decrease of fluorescence intensity of auramine. As the number of aliphatic group of alcohol increases, the decrease of fluorescence intensity of auramine has been pronounced. And the sharp increases of the reduced viscosity of isotactic PHEMA in water-alcohol solvents were observed in the lower region of alcohol volume percentage with the increasing number of aliphatic group of alcohol. Nevertheless, the sharp increase of the reduced viscosity of isotactic PHEMA in ethyleneglycol-water solvent was obtained even at a low-volume percentage region of ethyleneglycol at which compact structures exist. Therefore, we consider that the increase of viscosity at this region is due to the hydrophilic side group of polymer-solvent interaction, forming hydrogen bonds. The experimental results suggest that compact structures of isotactic PHEMA in aqueous solution are caused by hydrophobic interactions by methyl group of polymer backbone, and the hydrophobic interaction by adding alcohols. Finally, our study brings the fact that the solvating sites of alcohols on the isotactic PHEMA molecule are strongly influenced by the number of hydroxyl and aliphatic group in alcohols.     

Anionic graft polymerization of methyl methacrylate on starch and dextrin

The anionic graft polymerization of methyl methacrylate on the potassium alkoxide derivative of starch or dextrin in DMSO was studied. The effects of monomer and alkoxide concentrations as well as temperature were investigated. The yield of graft polymer increased with increasing alkoxide concentration. With increasing monomer concentration and with increasing temperature the extent of homopolymer formation increased. The composition of the graft polymers was found to depend on the reaction conditions. Graft polymers having about 10–40% poly(methyl methacrylate) were obtained. There were quantitative differences in yield of isolated graft polymer between starch and dextrin and these were ascribed to differences in the solubility properties of the carbohydrates. Evidence on the structure of the graft polymers and on the mechanism of the graft polymerization was obtained from acid hydrolysis of the graft polymers and determination of the molecular weights of the cleaved side chains.     

2-(p-toluidino)-6-naphthalene sulfonate as a fluorescent probe for flocculation studies of cationic potato amylopectin and nanosized silica particles 1. 2-p-(toluidino)-6-naphthalene sulfonate binding to cationic amylopectin

2-(p-toluidino)-6-naphthalene sulfonate (TNS) is a probe that fluoresces strongly when bound to certain proteins and polymers, but weakly in aqueous solution. Absorption and fluorescence spectroscopy were used to study the interaction of TNS with native amylopectin potato starch (NApS) and cationized amylopectin potato starch (CApS) in aqueous solution. The anionic TNS binds to CApS at a single type of binding site, with an affinity which has both electrostatic and nonelectrostatic contributions (including hydrogen bonding), whereas binding to NApS occurs at the same type of site but only by nonelectrostatic means. The affinity to CApS decreases strongly with increasing salt concentration, due to screening of the electrostatic attraction, whereas with NApS increasing salt concentration slightly enhances the binding affinity, most likely due to screening of a weak repulsive interaction between TNS and phosphate residues on NApS. The association constant for binding of TNS to CApS in 5 mM NaCl is 110 ± 20 M⁻¹. This comparatively weak binding makes TNS a useful probe in kinetic investigations of the flocculation of anionic silica particles by CApS. Received: 14 August 1998 Accepted in revised form: 4 December 1998     

Synthesis of block copolymer-stabilized Au-Ag alloy nanoparticles and fabrication of poly(methyl methacrylate)/Au-Ag nanocomposite film

[Poly(2-(N,N-dimethylamino)ethyl methacrylate)]-b-poly(methyl methacrylate)-b-[poly(2-(N,N-dimethylamino)ethyl methacrylate)] (M(n)=45,000; 20K-5K-20K; PDI = 1.2) block copolymer surfactant stabilized amphiphilic gold-silver alloy nanoparticles (Au-Ag(PDMA-b-PMMA-b-PDMA)) has been synthesized in both water and in organic medium. The block copolymer stabilized pre-made alloy nanoparticles were successfully dispersed in hydrophobic poly(methyl methacrylate) homopolymer matrix (PMMA) of molecular weight 30,000. The successful synthesis of alloy nanoparticles was accessed by Transmission Electron Microscope (TEM), Energy Dispersed X-ray (EDX), and UV-visible spectrophotometric analysis. The surface functionality of the nanoparticles was confirmed by quantitative determining the grafting density of polymer chain around the nanoparticle surface using combination of thermo gravimetric (TGA) and TEM analysis. The hydrodynamic diameter of the alloy particles including the polymer chains was obtained from dynamic light scattering measurement (DLS). The mechanism of synthesis of high concentration of Au-Ag alloy particles from HAuCl(4) and AgNO(3) (in presence of Cl(-) from reduction of gold salt) metal particles precursors and the successful preparation of poly(methyl methacrylate)/gold-silver nanocomposite films have been discussed.     

Linear polymers of allyl acrylate and allyl methacrylate

Allyl acrylate and allyl methacrylate were polymerized by anionic initiators to soluble linear polymers containing allyl groups in the pendant side chains. The pendant unpolymerized allyl groups of the resulting linear poly(allyl acrylates) were shown to be present by: (1) the disappearance of the acrylyl and methacrylyl double bond absorptions in the infrared spectra in the conversions of monomers to polymers; (2) postbromination of the allyl bonds in the linear polymer; (3) the disappearance of the allyl groups absorptions in the infrared spectra of the brominated linear polymers; and (4) the thermal- and radical-initiated crosslinking of the linear polymers through the allyl groups. Allyl acrylate and allyl methacrylate show great reluctance to copolymerize with styrene under anionic initiation, but copolymerize readily with methyl methacrylate and acrylonitrile. Block copolymers were prepared by reacting allyl methacrylate with preformed polystyrene and poly(methyl methacrylate) anions. The linear polymers and copolymers of allyl acrylate may be classified as “self-reactive” polymers which yield thermosetting polymers. Bromination of the linear polymers offers a convenient method of producing self-extinguishing polymers.