Structure analysis and the standard molar enthalpy of formation of a coordination polymer [Co(TO)2Cl2]n (TO = 1,2,4-triazole-5-one)

A coordination polymer was synthesized by the reaction of CoCl₂ with 1,2,4-triazole-5-one (TO) and charaterized by means of IR and TG–DTG. Single-crystal structure analysis showed that the complex crystallized in the monoclinic space group C2/c: a = 23.105(9) Å, b = 3.5683(2) Å, c = 13.589(6) Å,  = 90°, β = 124.038(4)°, γ = 90°, V = 928.4(7) Å³, Z = 4. The standard molar enthalpy of formation of the complex was determined to be (−1034.28 ± 0.95) kJ mol⁻¹.     

The molecular structure and the puckering potential function of silacyclobutane as determined by gas electron diffraction and relaxation constraints from ab initio calculations

Gas electron diffraction is applied to determine the geometric parameters of the silacyclobutane molecule using a dynamic model where the ring puckering was treated as a large amplitude motion. The structural parameters and the parameters of the potential function were refined taking into account the relaxation of the molecular geometry estimated from ab initio calculations at the MP2/6-311+G(d, p) level of theory. The potential function has been described as V() = V₀[(/_e)² − 1]² with the following parameters V₀ = 0.82 ± 0.60 kcal/mol and _e = 33.5 ± 2.7°, where is a puckering angle of the ring.

The geometric parameters at the minimum V() (r_a in Å, in degrees and uncertainties given as three times the standard deviations including a scale error) are: r(Si–H_ax) = 1.467(96), r(Si–H_eq) = 1.468(96), r(Si–C) = 1.885(2), r(C–C) = 1.571(3), r(C–H) = 1.100(3), CSiC = 77.2(9), HSiH = 108.3, SiCH_eq = 123.5(16), SiCH_ax = 111.9(16), CC₅H_eq = 118.4(24), CC₅H_ax = 112.3(24), HC₃H = 107.7, δ(HSiH) = 6.6, δ(HC₃H) = 7.0, where the tilts δ, HSiH, and HC₃H are estimated from ab initio constraints. The structural parameters are compared with those obtained for related compounds.     

Kinetic investigation of electronic energy transfer processes following the pulsed dye-laser generation of excited atomic barium, Ba[6s6p(P1)], in the presence of atomic strontium

The collisional behaviour of Ba[6s5d(³D_J)], 1.151 eV above the 6s²(¹S₀) electronic ground state, in the presence of atomic strontium, has been investigated in the ‘long-time domain' (ca. 100 μs–1 ms) following the pulsed dye-laser excitation of barium vapour at elevated temperature at λ = 553.5 nm (Ba[6s6p(¹P₁)] ← Ba[6s²(¹S₀)]. Ba(³D_J) is subsequently produced from the short-lived ¹P₁ state (τ_e = 8.37 ± 0.38 ns) by a number of radiative and collisional processes. It may then be monitored in the ‘long-time domain' by atomic spectroscopic marker methods involving either collisional activation of Ba(³D_J) by Ba(¹S₀) and He buffer gas to yield Ba[6s6p(³P_J)] with subsequent emission from the ³P₁ state (τ_e = 1.2 ± 0.1 μs): Ba[6s6p(³P₁)] → Ba[6s²(¹S₀)] + hv (λ = 791.1 nm). Alternatively, emission from Ba(¹P₁) may be monitored at long times following the generation of this short-lived state by energy pooling following self-annihilation of Ba(³D_J) + Ba(³D_J) from Ba[6s6p(¹P₁)] → Ba[6s²(¹S₀)] + hv (λ = 553.5 nm). The generation of Ba(³D_J) in the presence of atomic strontium yields emission in the long-time domain from Sr[5s5p(³P₁)] (τ_e = 19.6 μs): Sr[5s5p(³P₁)] → Sr[5s²(¹S₀)]  + hv (λ = 689.3 nm). Whilst the decay profiles at short times are complex in form, at long times all these atomic profiles show first-order kinetic removal with the decay coefficients for λ = 791.1 nm, 689.3 nm and 553.5 nm emissions in the ratio 1 : 2 : 2, consistent with overall third-order activation of the form: Ba(³D_J) + Ba(³D_J) + Sr(¹S₀) → Sr(³P_J) + 2Ba(¹S₀). The mechanism is modelled in detail, including measurement of integrated emission intensities, yielding kinetic data for fundamental collisional processes. The overall rate constant for the third-order collisional activation of Sr[5s5p(³P_J])from 2Ba[6s5d(³D_J)] + Sr[5s²(¹S₀)] takes the upper limit of 5.8 × 10⁻²⁷ cm⁶ atom⁻² s⁻¹ (T = 900 K). The rate constant for the two body collisional quenching of Ba[6s5d(³D_J)] by ground state atomic strontium, Sr[5s²(¹S₀)], is found to be (2.0 ± 0.1) × 10⁻¹² cm³ atom⁻¹ s⁻¹ (T = 900 K).     

Influence of electronic and steric effects on stability constants and electrochemical reversibility of divalent ion complexes with glycine and sarcosine. A glass electrode potentiometric, sampled direct current polarographic, virtual potentiometric, and molecular modelling study

Cd^II complexes with glycine (gly) and sarcosine (sar) were studied by glass electrode potentiometry, direct current polarography, virtual potentiometry, and molecular modelling. The electrochemically reversible Cd^II–glycine–OH labile system was best described by a model consisting of M(HL), ML, ML₂, ML₃, ML(OH) and ML₂(OH) (M = Cd^II, L = gly) with the overall stability constants, as log β, determined to be 10.30 ± 0.05, 4.21 ± 0.03, 7.30 ± 0.05, 9.84 ± 0.04, 8.9 ± 0.1, and 10.75 ± 0.10, respectively. In case of the electrochemically quasi-reversible Cd^II–sarcosine–OH labile system, only ML, ML₂ and ML₃ (M = Cd^II, L = sar) were found and their stability constants, as log β, were determined to be 3.80 ± 0.03, 6.91 ± 0.07, and 8.9 ± 0.4, respectively. Stability constants for the ML complexes, the prime focus of this work, were thus established with an uncertainty smaller than 0.05 log units. The observed departure from electrochemical reversibility for the Cd–sarcosine–OH system was attributed mainly to the decrease in the transfer coefficient . The MM2 force field, supplemented by additional parameters, reproduced the reported crystal structures of diaqua-bis(glycinato-O,N)nickel(II) and fac-tri(glycinato)-nickelate(II) very well. These parameters were used to predict structures of all possible isomers of (i) [Ni(H₂O)₄(gly)]⁺ and [Ni(H₂O)₄(sar)]⁺; and (ii) [Ni(H₂O)₃(IDA)] and [Ni(H₂O)₃(MIDA)] (IDA = iminodiacetic acid, MIDA = N-methyl iminodiacetic acid) by molecular mechanics/simulated annealing methods. The change in strain energy, ΔU_str, that accompanies the substitution of one ligand by another (ML + L′ → ML′ + L), was computed and a strain energy ΔU_str = +0.28 kcal mol⁻¹ for the reaction [Ni(H₂O)₄(gly)]⁺ + sar → [Ni(H₂O)₄(sar)]⁺ + gly was found. This predicts the monoglycine complex to be marginally more stable. By contrast, for the reaction [Ni(H₂O)₃IDA] + MIDA → [Ni(H₂O)₃MIDA] + IDA, ΔU_str = −0.64 kcal mol⁻¹, and the monoMIDA complex is predicted to be more stable. This correlates well with (i) stability constants for Cd–gly and Cd–sar reported here; and (ii) known stability constants of ML complex for glycine, sarcosine, IDA, and MIDA.     

Synthesis and crystal structure of two novel nickel (imidazole) complexes having hydrogen-bonded networks

Two nickel (imidazole) complexes, Ni(im)₆Cl₂·4H₂O (1) and Ni(im)₆(NO₃)₂ (2) (im=imidazole) have been synthesized and characterized by elemental analysis, IR, UV, TG and single crystal X-ray diffraction. 1 crystallizes in the triclinic space group P-1 with a=8.800(6) Å, b=9.081(6) Å, c=10.565(7) Å, =75.058(9)°, β=83.143(8)°, γ=61.722(8)°, V=718.3(8) Å³, Z=1 and R₁ (wR₂)=0.0469 (0.1497). 2 crystallizes in the trigonal space group R-3 with a=12.370(6) Å, b=12.370(6) Å, c=14.782(14) Å, =90.00°, β=90.00°, γ=120.00°, V=1959(2) Å³, Z=3 and R₁ (wR₂)=0.0358 (0.0955). 1 and 2 exhibit different supramolecular network due to their different counter anions and different hydrogen bonding connection. In compound 1, [Ni(im)₆]²⁺ cation and counter anions Cl⁻ alternatively array in an ABAB fashion via N–HCl hydrogen bonding. In compound 2, the plane of each NO₃²⁻ is almost parallel and each NO₃²⁻ connect three different [Ni(im)₆]²⁺ cations via N–HO hydrogen bonding.     

Extraction and DFT study on the complexation of H3O with hexaethyl p-tert-butylcalix[6]arene hexaacetate

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium H₃O⁺(aq) + 1· Na⁺(nb)  1·H₃O⁺(nb) + Na⁺(aq) taking place in the two-phase water–nitrobenzene system (1 = hexaethyl p-tert-butylcalix[6]arene hexaacetate; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K_ex (H₃O⁺, 1·Na⁺) = −0.6 ± 0.1. Further, the stability constant of the 1·H₃O⁺ complex in water saturated nitrobenzene was calculated for a temperature of 25 °C as log β_nb (1·H₃O⁺) = 6.8 ± 0. 2. By using quantum mechanical DFT calculations, the most probable structure of the 1·H₃O⁺ complex species was predicted. In this complex, the hydroxonium ion H₃O⁺ is bound partly to three carbonyl oxygen atoms by strong hydrogen bonds and partly to three alternate phenoxy oxygens by somewhat weaker hydrogen bonds.     

Characterization and decomposition mechanism of an unusual nickel, thiocyanate and 4-methylpyridine polymeric complex

The synthesis, characterization, and thermal decomposition of the [Ni(SCN)₂(H⁺SCN)₂(4-mepy)₂] compound with an octahedral structure in polymeric chain were reported, in which SCN groups form bridges among Ni(II) ions. The compound decomposes in water resulting in a pH<4 solution. The FT-IR spectrum presented doublet bands at 2117; 2128 cm⁻¹, 788; 773 cm⁻¹ assigned to ν(C---N) and ν(C---S) stretching modes, respectively, and δ(SCN) deformation modes at 468; 476 cm⁻¹. The Raman spectrum of the compound presented the ν(C---N) stretching as a strong doublet at 2122; 2128 cm⁻¹, ν(C---S) at 783; 770 cm⁻¹, and δ(SCN) at 468; 477 cm⁻¹. No significant changes were observed in the 4-mepy ligand bands compared with the vibrational frequencies of the pure compound or the compound in aqueous solution 0.2 mol l⁻¹. The crystal UV–vis reflectance spectrum presented two bands centered in 626 and 424 nm tentatively assigned to the d→d type transitions, ³A_2g→³T_1g and ³A_2g→³T_1g, for a symmetry close to O_h. The TG curve showed a mass loss between 120 and 200 °C assigned to the loss of the two 4-mepy molecules; from 200 to 265 °C, the loss of the two H⁺SCN groups; and from 265 to 450 °C, the loss of the two SCN groups that formed the bridges among the nickel atoms. Based on these mass loss data, a mechanism of thermal decomposition for the compound was proposed.     

Monodentate and bidentate trifluoroacetato ligands in bis(trifluoroacetato)-(N-methyl-meso-tetraphenylporphyrinato)thallium(III)—a new dynamic 4:3 piano stool seven-coordinate geometry

The crystal structure of bis(trifluoroacetato)-(N-methyl-meso-tetraphenylporphyrinato) thallium(III), Tl(N---Me---tpp)(CF₃CO₂)₂ (2), was established and the coordination sphere around the Tl³⁺ ion is described as 4:3 tetragonal base–trigonal base piano stool seven-coordinate geometry in which the two cis CF₃CO₂ ⁻ groups occupy two apical sites. The plane of the three pyrrole nitrogen atoms [i.e. N(2), N(3) and N(4)] strongly bonded to Tl³⁺ is adopted as the reference plane 3N. The pyrrole N(1) ring bearing the methyl group [i.e. C(45)H₃] is the most deviated one from the 3N plane making a dihedral angle of 23.3° whereas smaller angles of 9.9, 2.7 and 4.7° occur with pyrroles N(2), N(3), and N(4), respectively. Because of the larger size of the thallium(III) ion, Tl is considerably out of the 3N plane; its displacement of 1.02 Å is in the same direction as that of the two apical CF₃CO₂ ⁻ ligands. The intermolecular trifluoroacetate exchange process for 2 in CD₂Cl₂ solvent is examined through ¹⁹F and ¹³C NMR temperature-dependent measurements. In the slow-exchange region, the CF₃ and carbonyl (CO) carbons of the CF₃CO₂ ⁻ groups in 2 are separately located at δ 114.3 [¹J(C–F)=290 Hz, ³J(Tl–C)=411 Hz] and 155.1 [²J(C–F)=37 Hz, ²J(Tl–C)=204 Hz], respectively, at −106 °C. In the same slow-exchange region, the fluorine atoms of 2, Tl(N---Me---tpp)(CF₃CO₂)⁺ and the free CF₃CO₂ ⁻ are located at δ −73.76 [⁴J(Tl–F)=44 Hz], −73.30 [⁴J(Tl–F)=22 Hz], and −76.15 ppm at −97 °C, respectively.     

Ab initio structural trends and torsional sensitivity in n-hexane and comparisons with crystallographic structural results

The molecular structures of n-hexane were determined by RHF/4-21G ab initio geometry optimization at 30° grid points in its three-dimensional τ₁(C11–C8–C5–C1), τ₂(C14–C11–C8–C5), τ₃(C17–C14–C11–C8) conformational space. Of the resulting 12×12×12=1728 grid structures, 468 are symmetrically non-equivalent and were optimized constraining the torsions τ₁, τ₂, and τ₃ to the respective grid points, while all other structural parameters were relaxed without any constraints. From the results, complete parameter surfaces were constructed using natural cubic spline functions, which make it possible to calculate parameter gradients, |P|=[(∂P/∂τ_i)²+(∂P/∂τ_j)²]^1/2, where P is a C–C bond length or C–C–C angle. The parameter gradients provide an effective measure of the torsional sensitivity of the system and indicate that dynamic activities in one part of the molecule can significantly affect the density of states, and thus the contributions to vibrational entropy, in another part. This opens the possibility of dynamic entropic conformational steering in complex molecules; i.e. the generation of free energy contributions from dynamic effects of one part of a molecule on another. When the conformational trends in the calculated C–C bond lengths and C–C–C angles are compared with average parameters taken from some 900 crystallographic structures containing n-hexyl fragments or longer C–C bond sequences, some correlation between calculated and experimental trends in angles is found, in contrast to the bond lengths for which the two sets of data are in complete disagreement. The results confirm experiences often made in crystallography. That is, effects of temperature, crystal structure and packing, and molecular volume effects are manifested more clearly in bond lengths than bond angles which depend mainly on intramolecular properties. Frequency analyses of the τ₁, τ₂ and τ₃ torsional angles in the crystal structures show conformational steering in the sense that, if τ₁ is trans peri-planar (170°≤τ₁≤180°; −180°≤τ₁≤−170°), the values of τ₂ and τ₃ are clustered closely around the ideal gauche (±60°) and trans (±180°) positions. In contrast, when τ₁ is in the region (50°≤τ₁≤70°), there is a definite increase in the populations of τ₂ and τ₃ at −90 and −150°.     

A density functional study of N NQR parameters of imidazole derivatives and extrapolation to PfHRP2–Fe-PPIX complex

In this paper, density functional theory (DFT) was used to calculate ¹⁴N nuclear quadrupole coupling constants (NQCC), χ, and asymmetry parameters, η, for a series of imidazole derivatives: imidazole, 5-methylimidazole and histidine. These calculations were carried out with the PW91P86 method via the Gaussian 98 package. A systematic theoretical investigation of the different environmental effects on (χ, η) values of amino ¹⁴N1 and imino ¹⁴N2 of imidazole ring of these compounds, reveals that the local surrounding of nitrogen atoms play an important role in determining their χ and η values. Our calculations in solution show that adding explicit solvent molecules to the polarizable continuum model (PCM) has a strong effect on (χ, η) values, thereby indicating that for long-range effects, PCM, is not sufficient to describe the whole solvent effects. We also evaluate the influence of [Fe³⁺ (S = 1/2)] on the (χ, η) values of proximal and remote nitrogens of an axial ligand and compare with those of free ligands. The results show that Fe³⁺ has a strong effect on the (χ, η) values of proximal nitrogen unlike remote nitrogen. Finally, our results predict (χ = 1.56 MHz, η = 0.690) for proximal nitrogen and (χ = 2.75 MHz, η = 0.169) for remote nitrogen in PfHRP2–Fe³⁺-PPIX complex.     

Synthesis, structure and oxygen nonstoichiometry of La0.4Sr0.6Co1−yFeyO3−δ

The samples of La_0.4Sr_0.6Co_1−yFe_yO_3−δ (y = 0.2 and 0.4) were prepared using both conventional ceramic technique and nitrate–citrate precursors technique. The phase identification was made by X-ray diffraction method. The refinement of structural parameters from the XRD and neutron diffraction measurements was performed by full profile Rietveld analysis. Neutron diffraction showed that both samples possess distorted perovskite-type structure. Oxygen nonstoichiometry was measured by chemical analysis and thermogravimetry (TG) analysis in the range 20 ≤ T/°C ≤ 900 and 2E-5 ≤ pO₂/atm ≤ 4E-1. TG-experiments indicate a relatively fast and reversible oxygen exchange at pO₂ > 1E-2 atm. Mass saturation occurs at T < 300 °C upon cooling. The absolute value of oxygen nonstoichiometry was determined by iodometric titration measurements. It was found that both samples have practically stoichiometric composition at 300 °C in air and δ increases with increasing temperature and decreasing oxygen partial pressure.     

Chemistry and reactivity of dinuclear manganese oxamate complexes: Aerobic catechol oxidation catalyzed by high-valent bis(oxo)-bridged dimanganese(IV) complexes with a homologous series of binucleating 4,5-disubstituted-o-phenylenedioxamate ligands

The high-valent bis(oxo)-bridged dimanganese(IV) complexes with the series of binucleating 4,5-X₂-o-phenylenebis(oxamate) ligands (opbaX₂; X = H, Cl, Me) (1a–c) have been synthesized and characterized structurally, spectroscopically and magnetically. Complexes 1a–c possess unique Mn₂(μ-O)₂ core structures with two o-phenylenediamidate type additional bridges which lead to exceptionally short Mn–Mn distances (2.63–2.65 Å) and fairly bent Mn–O–Mn angles (94.1°–94.6°). The cyclovoltammograms of 1a–c in acetonitrile (25 °C, 0.1 M Bu₄NPF₆) show an irreversible one-electron oxidation peak at moderately high anodic potentials (E_ap = 0.50–0.85 V versus SCE), while no reductions are observed in the potential range studied (down to −2.0 V versus SCE). These dinuclear manganese oxamate complexes are excellent catalysts for the aerobic oxidation of 3,5-di-tert-butylcatechol to the corresponding o-quinone in acetonitrile at 25 °C. The order of increasing catecholase activity (k_obs) with the electron donor character of the ligand substituents as 1b (X = Cl) < 1a (X = H) < 1c (X = Me) correlates with Hammett σ⁺ values (ρ = −0.95). A mechanism involving initial activation of the catechol substrate by coordination to the dimetal center and subsequent oxidation to quinone by O₂ is proposed, which is consistent with the observed saturation kinetics.     

Luminescent properties of carbon-rich starburst gold(I) acetylide complexes. Crystal structure of [TEE][Au(PCy3)]4 ([TEE]H4=tetraethynylethene)

Two carbon-rich starburst gold(I) acetylide complexes [TEE][Au(PCy₃)]₄ (3, [TEE]H₄=tetraethynylethene) and [TEB][Au(PCy₃)]₃ (6, [TEB]H₃=1,3,5-triethynylbenzene) were prepared and their UV–vis absorption, emission and excitation spectra have been recorded. In fluid CH₂Cl₂ solutions, 3 exhibits prompt ¹(ππ*) fluorescence with λ_0–0 and λ_max at 413 and 428 nm, respectively, while 6 displays ³(ππ*) phosphorescence with λ_0–0 and λ_max at 446 and 479 nm, respectively. The crystal structure of 3·CH₂Cl₂ has been determined.     

Comparison of optical properties and crystal structures of the praseodymium and europium chloroderivatives of acetates

The praseodymium and europium dichloroacetates were obtained in the form of monocrystals. Crystal structures of the Ln(HCl₂CCOO)₃·2H₂O (Ln=Pr, Eu) compounds were determined by X-ray analysis. Both crystals proved to be isomorphous. They are monoclinic, space group P2₁/n with: a=9.747(6), b=13.857(7), and c=23.595(9) Å, β=95.03(4)°, U=3175(3) Å³, Z=8 for C₆H₇Cl₆O₈Pr and a=9.634(7), b=13.757(11), and c=23.524(14) Å, β=94.84(4)°, U=3107(4) Å³, Z=8 for C₆H₇Cl₆O₈Eu. There are two symmetry independent lanthanide cations, which adopt a nine-coordinate geometry with seven oxygen atoms from carboxylate groups and two oxygen atoms from water molecules. Absorption (Pr³⁺, Eu³⁺), emission and emission excitation (Eu³⁺) spectra of single crystals of Ln(HCl₂CCOO)₃·2H₂O were recorded at room temperature and low temperatures down to 4.2 K. Spectral intensities of the investigated systems are parametrized in terms of the Judd–Ofelt theory and compared to those of lanthanide trichloroacetates and acetates crystals. The relationship between the hypersensitivity and covalency is discussed. The nephelauxetic ratio β and Sinha's parameter δ are calculated based on the absorption spectra. The variation of these parameters and their correlation with the nature of metal–ligand bond is discussed. The bond polarity and bond strength of coordination complex determine the activity and stereospecifity of the catalyst thus the study of these properties are very important because of the application of lanthanide carboxylates as precursors of catalysts. The spectroscopic results are correlated with those from the crystal structure studies, especially with Ln–O distances and the co-ordinating forms of the carboxylate ions. The vibronic coupling in the f–f transitions were analysed. In order to determine the vibronic coupling quantitatively, calculations of the R=I_VIB./I_0-phonon rates were performed from the low temperature absorption spectra. The correlation between the vibronic coupling and covalency is analysed.     

The dehydroxylation of basic aluminum sulfate: An infrared emission spectroscopic study

The tridecameric aluminum polymer [AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ was prepared by forced hydrolysis of Al³⁺ up to an OH/Al molar ratio of 2.2. Upon addition of sulfate, the tridecamer crystallized as the monoclinic basic aluminum sulfate Na_0.1[AlO₄Al₁₂(OH)₂₄(H₂O)₁₂](SO₄)_3.55. The dehydroxylation of the basic aluminum sulfate has been studied by Fourier transform in-situ infrared emission spectroscopy over a temperature range of 200° to 750°C at 50°C intervals. The spectrum is characterized by the sulfate ν₁ (1024 cm⁻¹), ν₃ doublet (1117 and 1168 cm⁻¹) and the ν₄ doublet (568 and 611 cm⁻¹) modes. Furthermore, minor bands assigned to nitrate are observed. Upon heating from ≈350° to 400°C major changes are observed, especially in the bandwidth and band intensities. The bands in the hydroxyl stretching region due to the Al₁₃ group disappear, whereas the bands around 1050 cm⁻¹ display various changes in bandwidths, intensities and positions associated with the dehydration and dehydroxylation of the basic sulfate and the changing of the structure into an aluminum oxosulfate. The nitrate bands diminish upon heating.     

Structural and spectroscopic properties of Hexamethylenetetramine cobalt(II) complex: [Co(NCS)2(hmt)2(H2O)2][Co(NCS)2(H2O)4] (H2O)

Synthesis, structure, spectroscopy and thermal properties of complex [Co(NCS)₂(hmt)₂(H₂O)₂][Co(NCS)₂(H₂O)₄] (H₂O) (I), assembled by hexamethylenetetramine and octahedral Co(II) metal ions, are reported. Crystal data for I: F_w 387.34, a=9.020(8), b=12.887(9), c=7.95(1) Å, =96.73(4), β=115.36(5), γ=94.16(4)°, V=820(1) Å³, Z=2, space group=P−1, T=173 K, λ(Mo-K)=0.71070 Å, ρ_calc=1.718567 g cm⁻³, μ=17.44 cm⁻¹, R=0.088, R_w=0.148. An interesting two-dimensional network is assembled via hydrogen bonds through coordinated and free water molecules. The d–d transition energy levels of Co(II) ion are determined by UV–vis spectroscopy and calculated by ligand field theory. The calculated results agree well with experiment ones.     

Syntheses, crystal structures and electronic properties of a series of copper(II) complexes with 3,5-halogen-substituted Schiff base ligands and their solutions

We have systematically investigated the structural features, electronic properties, thermally-induced structural phase transitions and absorption spectra depending on the solvent for ten Cu(II) complexes with 3,5-halogen-substituted Schiff base ligands. Structural characterization of two new complexes, bis(N-R-1-phenylethyl- and N-R,S-2-butyl-5-bromosalicydenaminato-κ²N,O)copper(II), reveals that they afford a compressed tetrahedral trans-[CuN₂O₂] coordination geometry with trans-N–Cu–N = 159.4(2)° and trans-O–Cu–O = 151.7(3)° for the 1-phenylethyl complex and trans-N–Cu–N = 157.9(3)° and trans-O–Cu–O = 151.0(3)° for the 2-butyl one. All the complexes exhibit a structural phase transition by heating in the solid state regardless of their structures at room temperature. The absorption spectra of a series of ten complexes exhibit a slight shift of the d–d band at 16 000–20 000 cm⁻¹ and remarkable shift of the π–π* band at 24 000–28 000 cm⁻¹, which suggests that the dipole moment of the solvents presumably affects the conformation of the π-conjugated moieties of the ligands rather than the coordination environment. We have also attempted ‘photochromic solute-induced solvatochromism’ by a system of bis(N-R-1-phenylethyl-3,5-dichlorosalicydenaminato-κ²N,O)copper(II) and photochromic 4-hydroxyazobenzene in chloroform solution. We successfully observed a change of the d–d and π–π* bands of the complex in the absorption spectra caused by cis–trans photoisomerization of 4-hydroxyazobenzene.     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

Molecular weights of polystyrenes in toluene solutions by light scattering. Comparison between classical values and values deduced from a new method

Light scattering measurements in toluene solutions are performed for a series of monodisperse polystyrenes with a molecular weight M_w range from 4×10³ to 8×10⁶. The scattered polarized intensities I_v and the natural depolarization ratios ρ_n are registered with different apparatus at λ=633 or 488 nm and the M_w values are deduced through different formulae. The complete Carr and Zimm formula (CL_a), from I_v and ρ_n, and the usual simplified formula (CL_b), from I_v, are considered for the classical method. An already demonstrated formula is considered for the new method (New). Values of M_w and related parameters do not depend on the experimental systems used but deviations appear when using different formulae. The deviations are generally low (about 10%) but often systematic: M_w(CL_a)<M_w(CL_b)<M_w(New). The most important difference concerns the effect of destructive interferences for M_w>5×10⁵: the new formula leads to a lower increase from θ=90° to θ→0 for M_w values (θ is the observation angle). For instance, in the 8×10⁶ sample, M_w(θ→0)/M_w(θ=90°)=3.6 instead of 6.1, which implies a revision of the usual determination of the radius of gyration, R_g.     

Synthesis, structure and nuclease activity of copper complexes of disubstituted 2,2′-bipyridine ligands bearing ammonium groups

A series of Cu(II) complexes of disubstituted 2,2′-bipyridine bearing ammonium groups [Cu(L¹⁻⁴)₂Br]⁵⁺ (1–4, L¹ = [5,5′-(Me₂NHCH₂)₂-bpy]²⁺, L² = [5,5′-(Me₃NCH₂)₂-bpy]²⁺, L³ = [4,4′-(Me₂NHCH₂)₂-bpy]²⁺, L⁴ = [4,4′-(Me₃NCH₂)₂-bpy]²⁺ and bpy = 2,2′-bipyridyl) were synthesized, of which complexes 1 and 4 were structurally characterized. Both coordination configurations of Cu(II) ions can be described as distorted trigonal bipyramid. The interaction between all complexes and CT-DNA was evaluated by thermal-denaturation experiments and CD spectroscopy. Results show that the complexes interact with CT-DNA via outside electrostatic interactions and their binding ability follows the order: 1 > 2 > 3 > 4. In the absence of any reducing agents, the cleavage of plasmid pBR322 DNA by these complexes was investigated and the hydrolysis kinetics of DNA was studied in Tris buffer (pH 7.5) at 37 °C. Obtained pseudo-Michaelis–Menten kinetic parameters: 15.0, 13.6, 2.01 and 1.69 h⁻¹ for 1, 2, 3 and 4, respectively, indicate that complexes 1 and 2 exhibit very high DNA cleavage activities. According to their crystal data, the high nuclease activity may be attributed to the strong interaction of the metal moiety and two ammonium groups with phosphate groups of DNA.