Rapid elongation of CdS nanowire at room temperature

The CdS nanowires synthesized by solvothermal route are rapidly elongated in the presence of the ethylenediamine by ultrosonication method at room temperature. Transmission electron microscopy (TEM) analysis reveals that the influential factors on the rapid elongate process are the concentration of ethylenediamine and duration of the ultrosonication reaction. The elongated CdS nanowires are further characterized by UV–vis absorption spectra, which has no apparent difference in the position of the maximum absorption peak comparing with the starting CdS nanowires synthesized by solvothermal method. A mechanism of oriented attachment is proposed to explain the phenomena based on a series of experimental results.     

High-yield synthesis of selenium nanowires in water at room temperature

High-quality t-Se nanowires were obtained in high yield via a facile and environmentally benign route in water at room temperature by using ascorbic acid as the reducing agent under the assistance of beta-cyclodextrin.     

Lasing mechanism of ZnO nanowires/nanobelts at room temperature

ZnO has become the focus of photonics and optoelectronic research. We prepared pure Mn(II) doped ZnO nanowires with a controlled reduction reaction by carbon in an asymmetrical tube. Careful time-resolved photoluminescence experimental study indicates three types of lasing mechanisms: exciton-exciton interaction, bipolaronic exciton condensation, and plasma; these exist in different ZnO nanowires, which can be changed by doping Mn in ZnO nanowire. The transformation between varied mechanisms is discussed in detail with their spectral behaviors. These results are important in the design of future violet-blue luminescence and display devices.     

Non-catalytic and template-free growth of aligned CdS nanowires exhibiting high field emission current densities

Various CdS nanostructures, including nanoparticle film, bundles of quasi-aligned and well-aligned nanowires, were fabricated with a non-catalytic and template-free MOCVD process. The well-aligned CdS nanowires exhibit unusually high field emission current densities of 225 mA cm(-2) at the applied electric field of 20 V microm(-1).     

Synthesis and characterization of CePO_4 nanowires via microemulsion method at room temperature

Uniform CePO_4 nanowires with diameter of about 25 nm were synthesized by the water-in-oil microemulsion method at room temperature from cerous chloride,sodium orthophosphate,sodium chloride,cyclohexane,Triton X-100 and cetyltrimethyl ammonium bromide(CTAB).The crystal structure and morphology of the nanowires were characterized by XRD and TEM, respectively.The UV-vis absorption was detected by UV-vis spectrophotometer techniques.The results showed that as-prepared nanowires with the hexagonal phase have...     

Photochemical preparation of CdS hollow microspheres at room temperature and their use in visible-light photocatalysis

CdS hollow microspheres have been successfully prepared by a photochemical preparation technology at room temperature, using polystyrene latex particles as templates, CdSO₄ as cadmium source and Na₂S₂O₃ as both sulphur source and photo-initiator. The process involved the deposition of CdS nanoparticles on the surface of polystyrene latex particles under the irradiation of an 8 W UV lamp and the subsequent removal of the latex particles by dispersing in dichloromethane. Photochemical reactions at the sphere/solution interface should be responsible for the formation of hollow spheres. The as-prepared products were characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. Such hollow spheres could be used in photocatalysis and showed high photocatalytic activities in photodegradation of methyl blue (MB) in the presence of H₂O₂. The method is green, simple, universal and can be extended to prepare other sulphide and oxide hollow spheres.     

Oxygen promoted hydrogen production from formaldehyde reforming with oxide-derived Cu nanowires at room temperature

This work demonstrates a two-step method to produce oxide-derived Cu nanowires on Cu mesh surface to offer a monolithic catalyst that outstandingly improves the hydrogen production from reforming formaldehyde and water under ambient conditions. Our results not only reveal that the special oxide-derived nanostructure can significantly improve the formaldehyde reforming performance of Cu, but also display that the hydrogen production has a linear relationship with oxygen pressure. Specially, a maximum of 36 times increment in hydrogen generation rate is observed than that without oxygen during the reaction. Density functional theory calculations show that the formaldehyde molecule is adsorbed on Cu surface only when the adsorbed oxygen is in adjacency, and hydrogen release process is the rate-determining step. This work highlights that the activity of deliberately synthesized catalyst can further be promoted by dynamic chemical modulation of surface states during working.     

Transfer-printing of highly aligned DNA nanowires

We developed a simple method of reproducibly creating highly aligned DNA nanowires without any surface modifications or special equipment. Stretched DNA molecules initially present on the PDMS sheet were transferred onto another surface using transfer-printing (TP). Fluorescent microscopic and atomic force microscopic images revealed that many DNA molecules were highly aligned on surfaces after TP. Furthermore, it was also possible to realize the two-dimensional assembly of DNA nanowires by repeating TP.     

Xenon porometry at room temperature

Xenon porometry is a method in which porous material is immersed in a medium and the properties of the material are studied by means of 129Xe nuclear magnetic resonance (NMR) of xenon gas dissolved in the medium. For instance, the chemical shift of a particular signal (referred to as signal D) arising from xenon inside small pockets formed in the pores during the freezing of the confined medium is highly sensitive to the pore size. In the present study, we show that when naphthalene is used as the medium the pore size distribution of the material can be determined by measuring a single one-dimensional spectrum near room temperature and converting the chemical shift scale of signal D to the pore radius scale by using an experimentally determined correlation. A model has been developed that explains the curious behavior of the chemical shift of signal D as a function of pore radius. The other signals of the spectra measured at different temperatures have also been identified, and the influence of xenon pressure on the spectra has been studied. For comparison, 129Xe NMR spectra of pure xenon gas adsorbed to porous materials have been measured and analyzed.     

Direct fabrication of aligned metal composite carbon nanofibers on copper substrate at room temperature and their field emission property

Direct growth of aligned metal composite carbon nanofibers (MCNFs) was achieved by a highly reproducible room temperature growth process on cost effective electrically conductive copper (Cu) substrate without any catalyst. The direct fabrication of MCNFs on electrically conductive substrate might offer new perspectives in the field of field emission displays (FEDs).     

Visible light driven amide synthesis in water at room temperature from Thioacid and amine using CdS nanoparticles as heterogeneous Photocatalyst

Highly efficient photocatalytic thioacid mediated amide synthesis at room temperature using CdS nanoparticles as photocatalyst was observed under a household 30 W CFL in water. The operationally mild reaction was tolerant to a number of functional group substitutions on amine and could be scaled up to gram. This heterogeneous photocatalyst was extremely stable and could easily be recovered by simple centrifugation for at least six recycling reactions without any significant loss of catalytic performance. The possible reaction mechanism for the photocatalytic thioacid mediated amide synthesis over the CdS semiconductor has also been proposed on the basis of experimental observations.     

Compounds in the system Cs-Te at room temperature

In the system CsTe the compounds Cs₂Te, Cs₃Te₂, Cs₂Te₃, Cs₂Te₅ and CsTe₄ are stable at room temperature. The powder pattern of Cs₂Te was indexed.     

Template-free preparation of bunches of aligned boehmite nanowires

A simple method based on a hydrothermal process using alkali salts as mineralizers is proposed for the synthesis of aligned bunches of boehmite (gamma-AlOOH) nanowires without a template's assistance. Most bunches of aligned boehmite nanowires are constructed by two separated shorter bundles with widths of 700 to approximately 800 nm and lengths of about 1 microm. XRD patterns, FTIR spectra, and SEM and TEM images were used to characterize the products. The specific surface area and pore-size distribution of the obtained product as determined by gas-sorption measurements show that the boehmite bundles possess a high BET surface area and porosity properties. The importance of adding Na2B4O7 salts for the formation of bundle morphologies has been discussed.     

Cationic polymerization of isobutylene at room temperature

This review highlights recent approaches toward polyisobutylene (PIB) by an energy efficient room temperature cationic polymerization. Special focus is laid on our own work using modified Lewis acids and nitrile‐ligated metal complexes associated with weakly coordinating anions. In both cases, suitable conditions have been found for efficient production of PIB characterized by medium to low molar masses and a high content of exo double bonds as end groups—the typical features of highly reactive PIB, an important commercial intermediate toward oil and gasoline additives. These and other approaches demonstrate that the cationic polymerization of isobutylene is still not fully explored, and new innovative catalyst systems can lead to surprising results of high commercial interest. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Hydroboration with pyridine borane at room temperature

Treatment of pyridine borane (Py.BH3) with iodine, bromine, or strong acids affords activated Py.BH2X complexes that are capable of hydroborating alkenes at room temperature. Evidence is presented for an unusual hydroboration mechanism involving leaving group displacement. In contrast to THF.BH3, hydroboration with Py.BH2I selectively affords the monoadducts. The crude hydroboration products are converted into synthetically useful potassium alkyltrifluoroborate salts upon treatment with methanolic KHF2.     

Crystallization-induced phosphorescence of benzils at room temperature

Efficient room temperature phosphorescence (RTP) is rarely observed in pure organic luminogens. However, we have newly observed that benzil and its derivatives are nonluminescent in solvents and thin layer chromatography (TLC) plates, but become highly phosphorescent in crystal state at room temperature, exhibiting typical crystallization-induced phosphorescence (CIP) characteristics. The CIP phenomenon is ascribed to the restriction of intramolecular rotations in crystals owing to effective intermolecular interactions. Such intermolecular interactions greatly rigidify the molecular conformation and significantly decrease the nonradiative deactivation channels of the triplet excitons, thus giving boosted phosphorescent emission at room temperature.     

Thermal properties at room temperature of polytetrafluoroethylene

Through Differential Scanning Calorimetry (DSC), at least three room temperature transitions are clearly observable for native polytetrafluoroethylene (PTFE). The influence of the thermal history on the room temperature transitions has been investigated. Possible interpretations for the lowest room temperature transition are suggested.

---

Zusammenfassung Bei der Untersuchung von nativen Polytetrafluoroethylen (PTFE) lassen sich im Raumtemperaturbereich zumindest drei Umwandlungen eindeutig beobachten. Der Einfluss der termischen Vorgeschichte von PTFE Proben auf die Umwandlungen im Raumtemperaturbereich wurde untersucht.Mögliche ErklÄrungen für den tiefstliegenden übergang im genannten Temperaturbereich werden vorgeschlagen.

---

---

Dr. G. Ajroldi and Prof. G. Guerra are gratefully acknowledged for useful advice and stimulating discussions.