Styrene-PEG (600) DMA Crosslinked Polymers for Absorption of Oil Derivatives

In this work, styrene (St) based crosslinked polymers were prepared for removal of oil derivatives from aqueous solutions. Polyethylene glycol (600) dimethacrylate (PEG (600) DMA) was used as crosslinker in synthesis of styrene based crosslinked polymers, for the first time. The polymers were characterized by FTIR, SEM, elemental analysis and solvent (toluene, chloroform and fuel-oil) absorption capacities. The effects of different reaction parameters like crosslinker type, diluents amount and the presence of pore forming agent on the absorption properties of polymers were investigated. The polymers synthesized by using PEG (600) DMA have higher solvent absorption capacity than that of synthesized by using conventional crosslinker. Furthermore, the polymers synthesized in the presence of good diluents have higher absorption capacities. The addition of pore forming agent into the reaction medium has also improved the absorption rate of polymers. The absorption capacity of polymers in different solvents is in order of chloroform > toluene > fuel-oil. It was seen that oil derivatives can be removed efficiently from water by the St-PEG (600) DMA polymers.     

Head-to-head vinyl polymers. VI. Preparation and characterization of head-to-head poly(allyl alcohol) and its esters

Head-to-head (H–H) poly(allyl alcohol) (PAA) was prepared by the LiAlH₄ reduction of H–H poly(methyl acrylate) obtained from the methylation of alternating copolymer of ethylene with maleic anhydride. H–H poly(allyl acetate) (PAAc) and H–H poly(allyl benzoate) (PABz) were further derived by means of its acylations. All of these three H–H polymers were characterized by IR, NMR, TGA, and PGC measurements. The corresponding head-to-tail (H–T) polymers were also prepared by a similar method from the conventional H–T polymer of methyl acrylate, and characterized to allow comparison with the H–H polymers. The softening temperatures of all H–H polymers were somewhat higher than those of the respective H–T polymers, probably suggesting that the H–H placements increased the stiffness of the polymers. Unlike poly(acrylic esters) reported previously, these H–H allyl polymers were found to degrade at temperatures slightly lower than the H–T polymers. On pyrolysis at 430°C, both PAAc and PABz were also observed to release predominantly acetic acid and benzoic acid, respectively, and small quantities of the corresponding allyl ester monomers. The molar ratios of acid to ester were substantially larger for H–H polymers.     

Synthesis, characterization and properties of naphthoxazine-functional poly(propyleneoxide)s

Thermally curable naphthoxazine-functionalized polymers were synthesized by the reaction of linear (diamines) and branched (triamines) poly(propyleneoxide)s (Jeffamine series) having various molecular weights, with p-formaldehyde, and 2-naphthol. The structures of the resulting polymers were characterized by using FT-IR and ¹H-NMR. In addition, curing behavior of these polymers was studied using differential scanning calorimeter (DSC). Hydrophilicity of these polymers, both in cured and non-cured states, was investigated by water contact angle measurements. The surface topographies of the polymers were also examined by atomic force microscope (AFM).     

Studies on the thermotropic liquid crystalline polymer. XII. Synthesis and properties of crosslinkable thermotropic liquid crystalline homo- and copoly(ether-ester)s

A series of crosslinkable thermotropic liquid crystalline poly(ether-ester)s and copoly(ether-ester)s was prepared. All of the polymers were crosslinked by thermal treatment or photo-irradiation upon heating. The thermal stability and thermal crosslinking reaction of these polymers were investigated. These polymers also could be crosslinked by copolymerization with vinyl monomers, such as styrene or methyl methacrylate. The crosslinked polymers exhibited thermotropic liquid crystalline behavior after softening by heating. The phase behavior of linear polymers and crosslinked polymers was studied by differential scanning calorimetry (DSC) and an optical polarizing microscope equipped with a heating stage. © 1995 John Wiley & Sons, Inc.     

Surface Lewis acid-base properties of polymers measured by inverse gas chromatography

Surface Lewis acid-base properties are significant for polymers materials. The acid constant, K(a) and base constant, K(b) of many polymers were characterized by some researchers with inverse gas chromatography (IGC) in recent years. In this paper, the surface acid-base constants, K(a) and K(b) of 20 kinds of polymers measured by IGC in recent years are summarized and discussed, including seven polymers characterized in this work. After plotting K(b) versus K(a), it is found that the polymers can be encircled by a triangle. They scatter in two regions of the triangle. Four polymers exist in region I. K(b)/K(a) of the polymers in region I are 1.4-2.1. The other polymers exist in region II. Most of the polymers are relative basic materials.     

Graft polymers from poly(vinyl chloride) and chlorinated rubber

Graft polymers from poly(vinyl chloride) (PVC) and chlorinated rubber (CIR) with side chains of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), or poly(ethyl methacrylate) (PEMA) were synthesized. For this purpose, a vinyl monomer was polymerized in the presence of small quantities of PVC or CIR with benzoyl peroxide as catalyst. The graft polymers were separated from both homopolymers by precipitation with methanol from methyl ethyl ketone solutions of the reaction products and the grafting efficiency was calculated. The graft polymers were characterized by infrared spectra, elemental analysis, NMR, and osmometric or light-scattering determinations. From the results it is concluded that the PVC or CIR molecules contain side chains of PMMA, PMA, or PEMA. The graft polymers showed higher molecular weights, and the values of second virial coefficient for these polymers were much different from those of the starting polymers.     

Linear polymers of acrylic monomers containing an acetylenic moiety

1-Acryloxy-2-butyne and 1-methacryloxy-2-butyne were synthesized and polymerized by means of anionic initiators to soluble linear polymers containing acetylenic bonds in the pendant side chains. In contrast, insoluble, crosslinked polymers were formed when cationic and radical initiators were used. The unpolymerized acetylenic bonds in the resulting linear polymers were shown to be present by infrared spectroscopic methods and by the following post-reactions of these bonds: (1) the thermal- and radical-initiated crosslinking of the linear polymers through the acetylenic bonds; (2) the post-bromination of the acetylenic bonds; and (3) the reaction of decaborane with the acetylenic bonds. The anionic copolymerization of both monomers with a number of selected monomers was performed and the copolymer reactivity ratios for several of the comonomer pairs were determined. Dibromination of the linear polymers affords self-extinguishing polymers with apparently good hydrolytic stability. Decarbonation of the linear polymers yields soluble polymers which do not soften up to 300°C. The linear polymers and copolymers, as well as their partially brominated and partially decaboronated products, may be classified as “self-reactive” polymers which yield thermosetting polymers.     

基于2,6-二甲基萘的杂环聚芳醚酮的合成

由1,5-二(4'-氟苯甲酰基)-2,6-二甲基萘(1)和类双酚单体(2a～2d)通过N—C偶联聚合反应合成了一系列基于2,6-二甲基萘的新型杂环聚芳醚酮(3a～3d).采用FTIR、1H-NMR、DSC、TGA、GPC等手段对聚合物进行结构表征和性能测试,并研究了其溶解性及特性黏数.结果表明,聚合物在室温下易溶于氯仿、DMAc、NMP、吡啶和间甲酚等非质子极性有机溶剂,其氯仿溶液能形成无色透明、韧性较好的膜,特性黏数(ηinh)在0.76～1.40 dL/g范围内.聚合物3b～3d的数均分子量(Mn)和分散指数(PDI)分别在78000～104000和1.66～2.21范围内.该类聚合物的玻璃化转变温度(Tg)均大于280℃,在氮气氛围和800℃时的残余量在53%～69%范围内.该类聚合物在氮气中5%和10%的热失重温度分别在423～440℃和434～467℃范围内.     

Block Polymers Derived from Poly(ethylene Oxide) and Carboxyl-Terminated Polybutadiene

The use of preformed poly(ethylene oxide) (PEO) and carboxyl-terminated polybutadiene (CTPB) for the preparation of block polymers is reported. Block polymerization was carried out by esterification and by coupling of equimolar amounts of these polymers with 2,4-toluene diisocyanate (TDI). When esterification was carried out, conversion of the two preformed polymers and block polymer composition varied with reaction temperature, catalyst used, and molecular weight of the PEO. Full conversions were not obtained. Better results were achieved when the preformed polymers were coupled with TDI. Tensile properties and water absorption capability of these block polymers were determined. Hydrogels with high water content up to 82% were obtained.     

Molecular imprinting polymerization by Fenton reaction

The aim of this study is the preparation of molecularly imprinted polymers by employing a redox pair as initiator system. Bulk molecularly imprinted polymers were synthesized by using Fenton reagents as initiator system. Theophylline, methacrylic acid, and ethylene glycol dimethacrylate were employed as model template, functional monomer, and crosslinking agent, respectively. Conventional imprinted polymers were also prepared by using 2,2′-azoisobutyronitrile in order to evaluate the efficiency of the proposed initiator system. Redox molecularly imprinted polymers and conventional molecularly imprinted polymers were characterized by water uptake measurement, while the imprinting effect of synthesized polymers were evaluated by performing binding experiments in organic (acetonitrile) and in water (buffered water solution at pH = 7.4) media.     

含1,3,4-噁二唑甲壳型液晶聚合物的合成与表征

甲壳型液晶聚合物（mesogen-jacketed liquid crystal polymer,MJLCP）是1987年由周其凤教授[1]首先提出的概念.从化学结构看,甲壳型液晶聚合物属于侧链型,由烯类单体经链式聚合制得,容易得到高分子量的产物,具有一般柔性侧链型液晶聚合物的一些优点.但是与柔性侧链型液晶聚合物不同的是,MJLCP分子中的刚性液晶基元是通过腰部或重心位置与主链相联结的,在主链与刚性液晶基元的侧基之间只有很短或者没有柔性间隔基.由于在这类液晶聚合物的分子主链周围空间内刚性液晶基元的密度很高,分子主链被由液晶基元形成的外壳所包裹并被迫采取相对伸直的刚性链构象.因此,这类液晶聚合物又和主链型刚性链液晶聚合物相似,具有较明显的链刚性.近年来,周其凤课题组围绕甲壳型液晶聚合物深入开展了分子设计与合成、分子结构与性能等多方面的研究.其中,设计合成具有特定功能的甲壳型液晶聚合物是在以往研究工作和学科交叉融合的基础上发展起来的一项新的研究工作.将一些有特殊功能的基团引入到甲壳型液晶聚合物中会使其具有崭新的特性.     

Characterization of mesogen-jacketed liquid crystalline polymers by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

For synthetic polymers, a proper sample preparation method is essential for successful characterization by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. In this work, six synthetic mesogen-jacketed liquid crystalline polymers (MJLCPs) with different main-chain, spacer and mesogenic units were investigated by MALDI-TOF mass spectrometry. Several factors that affect the analysis of these polymers were examined. These factors include matrices used, cationization salts used, the concentration of polymers, and the ratio of sample to matrix. After testing different conditions, we found a suitable sample preparation method for these six polymers. The number average molecular weight (M(n)), weight average molecular weight (M(w)) and polydispersity (PD) were calculated using data obtained in the linear mode. The end groups of the polymers were proposed using data obtained in reflectron mode. Copyright 2000 John Wiley & Sons, Ltd.     

以亲核取代反应制备质子交换膜用磺化聚酰亚胺

本文先通过缩合反应合成羟端基的二酰亚胺单体, 然后利用亲核缩聚反应, 与4,4′-二氯二苯砜及3,3′-二磺酸钠基-4,4′-二氯二苯砜共聚, 制备聚合物. 该合成路线反应周期短, 对温度和溶剂等条件要求不高, 简便易得.     

NEW POLY(METHACRYLATE)S CONTAINING OXIME ESTERS MOIETIES BASED ON CYCLOHEXANON AND CYCLOPENTANON

The synthesis of two new methacrylates such as 2-[(cyclohexylideneamino)oxy]-2-oxoethyl methylacrylate (CHOEMA)and 2-[(cyclopentylideneamino)oxy]-2-oxoethyl methylacrylate(CPOEMA)are described.The monomers produced from the reaction of corresponding cyclohexanone O-(2-chloroacetyl)oxime and cyclopentanone O-(2- chloroacetyl)oxime with sodium methacrylate was polymerized in 1,4-dioxane solution at 65℃using AIBN as an initiator. The monomers and their polymers were characterized by IR,~1H- and ~(13)C-NMR s...     

Controlling the Fluorescence Performance of AIE Polymers by Controlling the Polymer Microstructure

Aggregation-induced emission (AIE) polymers with expected emission wavelength/color and fluorescence efficiency are valuable in applications. However, most AIE polymers exhibit irregular emission wavelength/color changes compared to the original AIE monomers. Here, we report the synthesis of AIE polymers with unchanged emission wavelength by ring-opening (co)polymerizations of 4-(triphenylethenyl)phenoxymethyloxirane (TPEO) and other epoxides or phthalic anhydride. The chemical structures/physical properties of all (co)polymers were characterized by NMR, SEC, MALDI-TOF, and DSC. The co-polyether microstructures were revealed by calculating the reactivity ratios and visualized by Monte Carlo simulation. The photoluminescence quantum yields of all the (co)polymers were determined in the solid state. We systematically correlated the fluorescence performance with molecular weights, crystallinity, monomer compositions, glass transition temperatures, side lengths, and flexibility/rigidity.     

Synthesis and characterization of novel poly（aryl ether）s containing naphthyl moieties

Two poly(aryl ether)s containing naphthyl moieties were prepared from bis(3,5-dimethyl-4-hydroxyphenyl)naphthyl methane (monomer 1) via nucleophilic aromatic substitution polycondensation with bis(4-fluorophenyl) ketone and bis(4-fluorophenyl) sulfone.The structures of these polymers were confirmed by ~1H NMR.The M_n values of the two polymers were 96,200 and 88,600, respectively.The polymers exhibited good thermal stabilities with 5%mass loss at T>400℃and high glass-transition temperature(T_g) of T>250℃...     

Linear polymers of allyl acrylate and allyl methacrylate

Allyl acrylate and allyl methacrylate were polymerized by anionic initiators to soluble linear polymers containing allyl groups in the pendant side chains. The pendant unpolymerized allyl groups of the resulting linear poly(allyl acrylates) were shown to be present by: (1) the disappearance of the acrylyl and methacrylyl double bond absorptions in the infrared spectra in the conversions of monomers to polymers; (2) postbromination of the allyl bonds in the linear polymer; (3) the disappearance of the allyl groups absorptions in the infrared spectra of the brominated linear polymers; and (4) the thermal- and radical-initiated crosslinking of the linear polymers through the allyl groups. Allyl acrylate and allyl methacrylate show great reluctance to copolymerize with styrene under anionic initiation, but copolymerize readily with methyl methacrylate and acrylonitrile. Block copolymers were prepared by reacting allyl methacrylate with preformed polystyrene and poly(methyl methacrylate) anions. The linear polymers and copolymers of allyl acrylate may be classified as “self-reactive” polymers which yield thermosetting polymers. Bromination of the linear polymers offers a convenient method of producing self-extinguishing polymers.     

含苯乙炔的可自交联高温高性能聚芳醚酮的合成与性能

将可交联的苯乙炔结构引入到热塑性聚芳醚酮链中, 并对其交联前后的性能进行了深入研究.     

Novel photo-crosslinkable liquid crystalline polymers containing vanillylidene cycloalkanones and azobenzene units

Two series of novel liquid crystalline photo-crosslinkable bis(vanillylidene-azobenzene) cycloalkanone containing polymers, namely poly(vanillylidene alkyloxy-4,4'-azobenzenedicarboxylic ester)s, have been synthesised from bis[m-hydroxyalkyloxy(vanillylidene)cycloalkanone] (m = 6, 8, 10) with azobenzene dicarbonylchloride by solution polycondensation method at ambient temperature. Polymers with varying spacer lengths have been synthesised and characterised by spectroscopic techniques. These variations have been correlated with the thermal properties and transition temperatures. Thermal transitions were analysed by differential scanning calorimetry (DSC) and the mesophases were identified by hot stage optical polarised microscopy (HOPM). All of the polymers were found to exhibit liquid crystalline properties. Transition temperatures were observed to decrease with increasing spacer length. The thermogravimetric analysis reveals that all of the polymers were stable up to 280°C undergo two-stage decomposition. Using the UV-visible photolysis studies we investigated the simultaneous behaviour of reactivity rates of crosslinking in the vanillylidene unit and isomerisation caused by the azobenzene unit in the photo-crosslinkable main chain liquid crystalline polymers. The photolysis of liquid crystalline bis(vanillylidene)cycloalkanone-based polymers reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerisation of azobenzene unit and 2p+2p addition by vanillylidene units. The EZ photoisomerisation in the liquid crystal phase disrupts the parallel stacking of the mesogens, resulting in the transition from the liquid crystal phase to isotropic phase. The photoreaction involving 2p+2p addition of the bis(vanillylidene)cycloalkanone units in the polymers results in the conjoining of the chains. The cyclopentanone polymers exhibited a faster rate of photolysis than the cyclohexanone polymers.     

Thermal properties and crystalline structure of poly(10-undecene-1-ol)

Atactic and isotactic-rich poly(10-undecene-1-ol)s were synthesized by metallocene-catalyzed polymerization. The thermal properties and the crystalline structure of the poly(10-undecene-1-ol)s were characterized using Dynamic Scanning Calorimetry (DSC), Temperature-Modulated DSC (MDSC), Fourier Transform Infrared Spectroscopy (FTIR), and Wide-Angle X-ray Scattering (WAXS). It was found that the polymers crystallize primarily at their side chains, which is indicated by similar arrangement of both isotactic-rich and atactic polymers. The polymers form smectic layer structures independent on their tacticity, however, for the isotactic-rich polymers, higher crystallinities were observed than for the atactic polymers in terms of higher melting enthalpies.