Long branching in poly(vinyl acetate) and poly(vinyl alcohol). II. Polymerization of vinyl acetate in the presence of crosslinked poly(vinyl alcohol)

It is a common view that poly(vinyl acetate) has many branches at the acetyl side group, but that the corresponding poly(vinyl alcohol) has little branching. In order to study the branching in poly(vinyl acetate) and poly(vinyl alcohol) which is formed by chain transfer to polymer, the polymerization of ¹⁴C-labeled vinyl acetate in the presence of crosslinked poly(vinyl acetate), which was able to be decrosslinked to give soluble polymers, was investigated at 60°C and 0°C. This system made it possible to separate as well as to distinguish the graft polymer from the newly polymerized homopolymer. Furthermore, the degree of grafting onto the acetoxymethyl group and onto the main chain were estimated. It became clear that, in the polymerization of vinyl acetate, chain transfer to the polymer main chain takes place about 2.4 times as frequently at 60°C as that to the acetoxy group and about 4.8 times as frequently at 0°C.     

Efficient carbonyl hydrosilylation reaction: Toward EVA copolymer crosslinking

In this article, the hydrosilylation reaction of carbonyl groups of acetate derivatives and SiH groups of hydride‐terminated polydimethylsiloxane at high temperature (100–130 °C) are described. Triruthenium dodecacarbonyl, Ru₃(CO)₁₂, was used as effective catalyst for hydrosilylation reaction. The hydrosilylation reactions with octyl acetate and 4‐heptyl acetate were investigated by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si). This work provides evidence of the addition reaction of SiH groups onto carbonyl groups. The influence of the nature of the acetate structure on the reaction kinetics was shown and the slight contribution of side reactions at high temperature highlighted. Hydrosilylation reaction was extent to the crosslinking of ethylene‐vinyl acetate (EVA) copolymer in the same range of temperature. The formation of EVA chemical network was demonstrated by HR‐MAS NMR spectroscopy and by measuring the gel fraction of EVA chains in hot toluene. From Flory theory, the crosslinking density of elastic strand was calculated to be 80 mol m^?3 in agreement with the measurements from swelling ratio (VA/SiH molar ratio: 11.8). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characters of hyperbranched poly(vinyl acetate) by RAFT polymeraztion

Reversible addition-fragmentation chain transfer (RAFT) polymerization of VAc in the presence of ECTVA, which capable of both reversible chain transferable through a xanthate moiety and propagation via a vinyl group, led to highly branched copolymers by a method analogous to self-condensing vinyl polymerization (SCVP). The ECTVA acted as a vinyl acetate AB^∗ inimer. It was copolymerized with vinyl acetate (VAc) in ratios selected to tune the distribution and length of branches of resulting hyperbranched poly(vinyl acetate). The degree of branching increased with chain ECTVA concentration, as confirmed by NMR spectroscopy. The polymer structure was characterized via MALDI–TOF. Retention of the xanthate compound during the polymerization was evidenced by successful chain extension of a branched (PVAc) macroCTA by RAFT polymerization. The branched PVAc led to better dissolution as compared to linear PVAc, an effect attributed primarily to an increased contribution of end groups.     

Effect of pressure on free-radical copolymerization kinetics. I. A concept of additivity of partial molar volumes of activation

A short review of the effect of pressure on copolymerization kinetics shows the necessity of simple models for a better understanding of activation volumes. Therefore, a simple concept, possibly generally valid for free-radical polymerization, is proposed, based on the assumption that molar volumes of activation can be expressed as an addition of a characteristic radical and a monomer contribution, regardless of the combination involved. The scheme may facilitate the visualization of the transition state and contribute to the understanding of reaction mechanisms of radical polymerizations. Ethylene–vinyl acetate copolymerization at 62°C with tert-butyl alcohol as solvent agrees with the proposed scheme, appearing from the pressure independence of the product of reactivity ratios at the different levels (35,600, and 1200 kg/cm²). Implicitly it can be shown that an ethylene monomer contributes about 2 cm³/mole more to the activation volumes of the propagation reactions than does the vinyl acetate monomer, whereas for the radicals the difference of the respective contributions to the activation volumes is opposite in sign.     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Chain transfer to polymer in emulsion polymerization

Chain transfer to polymer in emulsion polymerizations of acrylate monomers and vinyl acetate has been studied using ¹³C NMR spectroscopy to elucidate the chemistry by which chain transfer occurs and to quantify the mol% branches resulting from the reaction. In emulsion polymerizations of n-butyl acrylate, ethyl acrylate and methyl acrylate, chain transfer to polymer proceeds via abstraction of hydrogen atoms from backbone tertiary C-H bonds and typically gives rise to 2-4 mol% branches in the polymers obtained at complete conversion, the level of branching increasing with reaction temperature. For these acrylates, there is no evidence for a significant difference between the extent of chain transfer to polymer. In emulsion polymerizations of vinyl acetate, chain transfer to polymer proceeds mainly via H-abstraction from methyl side-groups, though there is a small contribution from abstraction at backbone tertiary C-H bonds. The levels of branching that result are substantially lower than in acrylate emulsion polymerizations, typically being in the range 0.6-0.8 mol% in the polymers obtained at complete conversion. The level of branching increases with temperature and as the degree of monomer starving (and hence instantaneous conversion) increases. Emulsion copolymerization of vinyl acetate with a small amount (5-20 wt%) of n-butyl acrylate gives rise to a significant increase in the level of branching (to values around 1.3-1.6 mol%), which results predominantly from H-abstraction of backbone tertiary C-H bonds in n-butyl acrylate repeat units by propagating radicals with vinyl acetate end units.     

13C-NMR study of chlorinated ethylene–vinyl acetate copolymers

¹³C-NMR has been used to analyze the microstructures of a series of experimental chlorinated ethylene–vinyl acetate copolymers (15–56% CI). Previously established line assignments for EVA copolymers and substituent effect parameters for chlorine have enabled us to tentatively assign partial structures up to five carbon atoms in length. The ¹³C-NMR analyses of a commercial vinyl chloride–vinyl acetate copolymer, a commercial vinyl chloride–vinyl acetate–ethylene terpolymer, and a commercial chlorinated polyethylene support the structural assignments. Data obtained for the experimental resins indicate that the acetate groups influence the way in which chlorine is added to the polymer chain. furthermore, the data indicate the acetate groups undergo little, if any, chlorination.     

衰减链转移(DT)聚合醋酸乙烯酯的动力学

在醋酸乙烯酯的普通自由基聚合体系中加入少量碘（质量分数为0.57%～0.86%）,用偶氮二异丁腈作引发剂合成聚醋酸乙烯酯,对其聚合反应的动力学及反应机理进行了研究。 考察了碘质量分数对聚合反应速率、聚合物分子量及分子量分布的影响,发现随着碘浓度的增加,聚合物分子量及分子量分布得到更好的控制;对聚合过程进行了核磁跟踪,考察了聚合过程中几种化合物的变化情况,特别是初级自由基与碘生成的加合物A-I（A来自引发剂分裂后产生的自由基）及单体加合物A-Mn-I（M代表单体单元）的变化情况;对聚合物结构作了详细的1H NMR分析,结果表明,聚合过程中分子量随时间延长而逐渐增大,分子量分布随单体转化率增加而变窄,聚合终期,单体转化率达到80%左右时,所得聚合物分子量分布窄（Mw/Mn≤1.41）,且含有碘端基。该方法的自由基聚合具有活性/可控的性质。     

Radical polymerization of vinyl acetate in individual and mixed solvents

The kinetics of polymerization of vinyl acetate in individual and mixed solvents was studied. The reaction rate constant and the rate of chain transfer in the mixed solvent were calculated, molecular weights and some adhesive characteristics of poly(vinyl acetate) obtained by the radical polymerization in solution were determined. A comparative analysis of the polymers obtained in the individual and mixed solvents was performed. It is shown that the change in the solvent composition can affect the rate of reaction and the poly-(vinyl acetate) adhesive properties.     

Ceric Ion Initiated Graft Polymerization onto Poly(vinyl Alcohol)

This paper describes the kinetics of the ceric ion-initiated graft co-polymerization of vinyl acetate-acrylonitrile to poly(vinyl alcohol). The graft copolymerization rate R_p was found to be first order with respect to the total concentration of the comonomer mixture [M], the concentration of vinyl alcohol repeating units [PVA], and the mole fraction of vinyl acetate in the comonomer feed mixture. R_p was independent of cerous ion. The grafting rate was independent of ceric ion above a ceric concentration of 0.0020 M but first order in ceric ion below that concentration. Rp initially increased rapidly with [H⁺] to a maximum and then decreased and levelled off at hgher [H⁺]. The rate of ceric ion disappearance was first order in [PVA], independent of [MI, and increased with increasing [H⁺] with a leveling off at high [H⁺]. A reaction mechanism.     

Diffusion-controlled vinyl polymerization. IV. Comparison of theory and experiment

Bulk polymerization data of methyl methacrylate, ethyl methacrylate, ethyl acrylate, n-propyl acrylate, vinyl acetate, and styrene were compared with the predictions of the theory proposed in the earlier parts of this series (I-III). This theory of polymerization kinetics uses the concepts of free volume and chain entanglements to describe the relationship between chain mobility and chain length dependent termination reactions. Excellent agreement was found between the predictions of the theory and the polymerization rate and molecular weight data of the six polymerization systems studied. Emphasis was placed on the ability to explain the development of higher order molecular weight averages (M?_w, M?_z, etc.) because they provide the most crucial tests for such a model. No changes were required in the model as it was applied to the different polymerization systems for a variety of reaction conditions. The theory offers a unified understanding of the diverse polymerization behavior displayed by such systems.     

60Co-initiated copolymerization of styrene with vinyl acetate

The kinetic behavior of the ⁶⁰Co-initiated copolymerization at 25°C of styrene with vinyl acetate at 1100 and 2000 rad/hr was studied. As in the case of thermal and photochemical copolymerizations of these monomers, the growing chains are particularly rich in styrene units, and the overall rate is affected by a diluent effect due to the vinyl acetate monomer. However, in the case of the radiation copolymerization, this effect is partially counterbalanced by an increase of the initiation rate with the vinyl acetate concentration; the polymerization rate curve shows a maximum at a vinyl acetate molar fraction of 0.25. This effect is due to the very different free radical yields of these two monomers. The experimental results may be understood on the basis of a kinetic scheme which involves an energy transfer process from the excited vinyl acetate molecules to the styrene monomer and a termination reaction of the growing chains by very short styrene radicals when the mixture is rich in vinyl acetate.     

Effect of solvent on the copolymerization of ethylene and vinyl acetate

The ethylene (M₁)–vinyl acetate (M₂) copolymerization at 62°C and 35 kg/cm² with α,α′-azo-bisisobutyronitrile as initiator has been studied in four different solvents, viz., tert-butyl alcohol, isopropyl alcohol, benzene, and N,N-dimethylformamide. The experimental method used was based on frequent measurement of the composition of the reaction mixture throughout the copolymerization reaction by means of quantitative gas chromatographic analysis. Highly accurate monomer reactivity ratios have been calculated by means of the curve-fitting I procedure. The observed dependence of the r values on the nature of the solvent is surprisingly large and can be correlated with the volume changes (= excess volumes) observed on mixing vinyl acetate (VAc) with the relevant solvent. An increased hydrogen bonding or dipole–dipole interaction through the carbonyl moiety of the acetate side group of VAc, induces a decreased electron density on the vinyl group of VAc, which in turn leads to a decreased VAc reactivity. The differences among the overall rates of copolymerization in the various solvents can be interpreted in terms of a variable chain transfer to solvent and the rate of the subsequent reinitiation by the solvent radical. In the case of benzene, complex formation is believed to play an important part.     

Vinyl acetate formation by the reaction of ethylene with acetate species on oxygen-covered Pd(111)

The reaction pathway of vinyl acetate synthesis is scrutinized by reacting gas-phase ethylene (at an effective pressure of 1 x 10-4 Torr) with eta2-acetate species (with a coverage of 0.31 +/- 0.02 monolayer) on a Pd(111)-O(2x2) model catalyst surface in ultrahigh vacuum. It is found that the 1414 cm-1 infrared feature due to the symmetric OCO stretching mode of the acetate species decreases in intensity due to reaction with gas-phase ethylene, while temperature-programmed desorption experiments demonstrate that vinyl acetate is formed. The formation of ethylidyne species is detected when almost all of the acetate species have been removed. The experimental removal kinetics are reproduced by a model in which adsorbed acetates react with an ethylene-derived (possibly ethylene or vinyl) species, where ethylene adsorption is blocked by the acetate present on the surface.     

Heterotactic poly(vinyl alcohol)

Bulky substituents in vinyl trialkylsilyl ethers and vinyl trialkylcarbinyl ethers led to heterotactic polymers (H = 66%). The polymers were converted into poly(vinyl alcohol) (PVA) and further to poly(vinyl acetate), and tacticity was determined as poly(vinyl acetate). Vinyl triisopropylsilyl ether in nonpolar solvents yielded a heterotactic polymer with a higher percentage of isotactic triads than syndiotactic triads (Hetero-I). Vinyl trialkylcarbinyl ethers in polar solvents gave a heterotactic polymer with more syndiotactic triads than isotactic (Hetero-II). Heterotactic PVA was soluble in water and showed characteristics infrared absorptions. Interestingly, Hetero-I PVA showed no iodine color reaction, but Hetero-II showed a much more intense color reaction than a commercial PVA. The mechanism of heterotactic propagation was discussed in terms of the Markóv chain model.     

Study on surface hydrolytic kinetics of poly(vinyl acetate) grafted onto polyurethane film

Alkali catalytic hydrolysis of poly(vinyl acetate) (PVAc) grafting onto polyurethane film surface was a heterogeneous reaction. The hydrolysis was carried on the PVAc particle surface, and the concentration of the alkali in the system was tested by titration method. The kinetics of PVAc surface hydrolytic reaction was studied by simple second-order reaction model. From linear regression analysis of experimental data, we inferred that the activation energy (E _a ) and pre-exponential factor (A) of PVAc surface hydrolytic reaction were 70.7 ± 0.2 kJ mol^?1 and (5.7 ± 0.5) × 10¹² kg mol^?1 s^?1, respectively. The results of transmission electron microscopy stated that the apparent hydrolytic degree was 2.1% when the surface of PVAc particle hydrolyzed absolutely.     

A simulation model for long-chain branching in vinyl acetate polymerization: 1. Batch polymerization

A new simulation model for the kinetics of long-chain branching formed via chain transfer to polymer and terminal double-bond polymerization is proposed. This model is based on the branching density distribution of the primary polymer molecules. The theory of branching density distribution is that each primary polymer molecule experiences a different history of branching and provides information on how each primary polymer molecule is connected with other chains that are formed at different conversions, therefore making possible a detailed analysis on the kinetics of the branched structure formation. This model is solved by applying the Monte Carlo method and a computer-generated simulated algorithm is proposed. The present model is applied to a batch polymerization of vinyl acetate, and various interesting structural changes occurring during polymerization (i.e., molecular weight distribution, distribution of branch points, and branching density of the largest polymer molecule) are calculated. The present method gives a direct solution for the Bethe lattice formed under nonequilibrium conditions; therefore, it can be used to examine earlier theories of the branched structure formation. It was found that the method of moments that has been applied successfully to predict various average properties would be considered a good approximation at least for the calculation of not greater than the second-order moment in a batch polymerization. © 1994 John Wiley & Sons, Inc.     

A novel synthesis of vinyl esters from vinylversatate-10

Vinylversatate-10 (VV10)¹ has successfully been used to synthesise a large number of lower vinyl esters by transvinylation in presence of mercuric acetate and sulfuric acid. The synthesis of vinylhalo esters proceeds with more difficulty. It has been observed that neither Hg(OAc)₂ nor H₂SO₄ alone is capable of initiating the transvinylation. Furthermore, it has been found that a molar ratio 2:1 of VV10 to carboxylic acid is sufficient to drive the reaction to the right by continuous distillation of the vinyl ester formed, and as a result a high yield of vinyl ester is obtained. A mechanism for this reaction and for the formation of side products has been proposed.