Poly(vinyl chloride) Nanocomposites

Poly(vinyl chloride) is one of the major thermoplastics beside other commodities polymers like polyethylene and polystyrene. However, some of its main characteristics such as plasticity, thermal and photo stability are inferior to other commodity polymers. Adding nano scale inorganic fillers to poly(vinyl chloride) or other polymers in view to obtain polymer nanocomposites with superior properties has drawn the attention of many researchers in the last decades. Poly(vinyl chloride) nanocomposites are obtained mainly by in situ polymerization, solution based or mixing techniques. The resulting products show improvement of most important properties of poly(vinyl chloride) such as thermal, mechanical, rheological, flammability, antibacterial, etc. This paper presents preparation ways of poly(vinyl chloride) nanocomposites using different nano fillers and the improved properties compared with those of virgin poly(vinyl chloride).     

Properties of poly(vinyl chloride) blends with polycarbonates and chlorinated polyethylene

The miscibility of polycarbonates derived from Bisphenol A or 2,5,2′,5′-tetramethyl-Bisphenol A with poly(vinyl chloride), chlorinated poly(vinyl chloride), and vinyl chloride-vinylidene chloride copolymers has been investigated. In miscible blends a shift of the position of the carbonyl absorption in the IR spectra indicates dipolar interactions between the polymers. The miscibility of chlorinated polyethylenes and reduced poly(vinyl chloride)s among each others demonstrates besides the importance of polar groups the influence of their distribution within the polymer chains for the compatibility of the polymers. The investigations on the miscibility have been carried out by differential scanning calorimetry, and by casting films with microscopical observation of the resulting structures.     

Vinyl chloride polymers and their use in polymer blends

A short introduction to polymer-polymer miscibility and to the prediction of the miscibility of polymers is given. The four main types of polymer-modified poly(vinyl chloride) (plastification, impact modification, processing aids and heat deflection temperature modification) are explained by examples. The thermal stability of poly(vinyl chloride) in such blends is discussed; the effectivity of tin-stabilizers may be higher in such blends than in pure poly(vinyl chloride).     

Correlation of thermal degradation mechanisms: Polyacetylene and vinyl and vinylidene polymers

The thermal degradation of poly(vinyl bromide) (PVB), poly(vinyl chloride) (PVC), poly(vinyl alcohol) (PVA), poly(vinyl acetate) (PVAc), poly(vinyl fluoride) (PVF), poly(vinylidene chloride) (PVC₂), and poly(vinylidene fluoride) (PVF₂) has been studied by direct pyrolysis–mass spectrometry (DP-MS) and flash pyrolysis–gas chromatography–mass spectrometry techniques. Vinyl and vinylidene polymers exhibit two competitive thermal degradation processes: (1) HX elimination with formation of polyene sequences which undergo further moleculaar rearrangements, and (2) main-chain cleavage with formation of halogenated or oxigenated compounds. The overall thermal degradation process depends on the prevailing decomposition reaction in each polymer; therefore, different behaviors are observed. The thermal degradation of polyacetylene (PA) has also been studied and found important for the elucidation of the thermal decomposition mechanism of the title polymers.     

Poly(vinyl chloride)–poly(ethylene oxide) block copolymers: Synthesis and characterization

Poly(vinyl chloride)-poly(ethylene oxide) block copolymers have been synthesized in solution and emulsion. The polymers were made by first synthesizing macroazonitriles through the reaction of 4,4′-azobis-4-cyanovleryl chloride with hydroxy-terminated poly(ethylene oxide) of varying molecular weights. These macroazonitriles had molecular weights in the range of 3000–88,000 and degrees of polymerization from 5 to 24. Thermal decomposition of the azolinkages in the presence of vinyl chloride monomer yielded block copolymers containing form 2 to 20 wt % poly(ethylene oxide). The structures of the block copolymers were characterized by spectrometric, elemental and molecular weight analyses. The possibility of some graft polymerization occurring via free-radical extraction of a methylene hydrogen from the poly(ethylene oxide) was considered. Polymerization of vinyl chloride with an azonitrile initiator in the presence of a poly(ethylene oxide) yielded predominately homopolymer with some grafted poly(vinyl chloride).     

Thermal decomposition of poly(vinyl chloride) and chlorinated poly(vinyl chloride). II. Organic analysis

A concerted study of poly(vinyl chloride), chlorinated poly(vinyl chloride), and poly(vinylidene chloride) polymers by spectroscopy, thermal analysis, and pyrolysis-gas chromatography resulted in a proposed mechanism for their thermal degradation. Polymer structure with respect to total chlorine content and position was determined, and the influence of these polymer units on certain of the decomposition parameters is presented. Distinguishing differences were obtained for the kinetics of decomposition, reactive macroradical intermediates, and pyrolysis product distributions for these systems. It was determined that chlorinated poly(vinyl chloride) systems with long-chain ? CHCI? units were more thermally stable than the unchlorinated precursor, exhibited increasing activation energy for the dehydrochlorination, and produced chlorine-containing macroradical intermediates and chlorinated aromatic pyrolysis products. The poly(vinyl chloride) polymer was relatively less thermally stable, exhibited decreasing activation energy during dehydrochlorination, and produced polyenyl macro-radical intermediates and aromatic pyrolysis products.     

Calibration of gel permeation chromatographic columns for measuring the molecular size of poly(vinyl chloride) in tetrahydrofuran

A calibration plot of the intrinsic viscosities of poly(vinyl chloride) fractions against elution volumes gives a good correlation between the first moments, i.e., mean elution volumes, and intrinsic viscosities of poly(vinyl chloride) whole polymers. This is evidence that column permeation of chain macromolecules is governed by some sort of hydrodynamic size in a manner akin to that in which hydrodynamic size affects capillary viscosity measurements.     

Exploring the heteroatom effect on polyelectrolyte multilayer assembly: the neglected polyoniums

Different positive polyelectrolytes having the same charge density, molecular weight, and molecular weight distribution were employed for polyelectrolyte multilayer (PEMU) assembly. The polycations differed only in the heteroatom on which the positive charge resided: poly(vinyl benzyl trimethyl ammonium) chloride, poly(vinyl benzyl trimethyl phosphonium) chloride, and poly(vinyl benzyl dimethyl sulfonium) chloride. While the ammonium repeat unit has been employed on numerous occasions for PEMU assembly, the phosphonium and sulfonium units are relatively neglected. The polyanions, poly(styrene sulfonate), PSS, or poly(acrylic acid), PAA, were typical pH-independent or pH-dependent polymers, respectively. All three polyoniums were quite similar in showing linear layer-by-layer buildup with PSS and exponential growth with PAA, under the conditions employed. Hydration and wettability were also similar between polyoniums.     

Reaction of sulfur with poly(vinyl chloride)

The reaction of elemental sulfur with poly(vinyl chloride) is studied in 1,2,4-trichlorobenzene and without any solvent under various conditions. Black polymers containing 3.77–57.64% chemically bonded sulfur and, according to IR spectroscopy, including >C=C< and >C=S groups in macromolecules are obtained. It is shown that the diffraction curves of poly(vinyl chloride) and of the reaction product containing 7.82% almost coincide but that the thermal stability of the latter is considerably higher than that of the initial polymer. The prospects of the practical use of the products of the reaction of poly(vinyl chloride) with elemental sulfur are demonstrated.     

Mechanism of fracture in glassy polymers. II. Survey of crazing response during crack propagation in several polymers

Of nine glassy polymers so far investigated, eight yield evidence that fracture propagation involves the formation and breaking of craze material. All eight produce fracture surfaces exhibiting interference colors to one extent or another and even the colorless areas cause low angle x-ray scattering. Ranked in terms of decreasing ease of colored surface formation, these polymers are poly(methyl methacrylate), poly(ethyl methacrylate), polystyrene, acrylonitrile—styrene copolymer, poly-α-methylstyrene, poly(vinyl acetate), a polyhydroxy ether, and polycarbonate. Only rigid poly(vinyl chloride) has failed to show evidence of precrack craze formation.     

NMR studies of chlorinated poly(vinyl chloride) and polybutadiene

Molecular structures of chlorinated poly(vinyl chloride) and polybutadiene have been studied by high resolution NMR. The spectra of the chlorinated polymers give broad signals. New peaks appear in the lower fields of the ? CH₂? and ? CHCl? groups with increasing chlorine content. The chlorination of poly(vinyl chloride) takes place predominantly on ? CH₂? rather than on ? CHCl? , e.g., a 70% chlorinated polymer has about 10 mole-% of ? CCl₂? groups. Polybutadiene reacts first with chlorine by addition to give a head-to-head poly(vinyl chloride), and then the substitution of the hydrogen atom takes place. Chlorinated polybutadiene with 70% Cl has about 18 mole-% of ? CCl₂? . The multiplets characteristic of spin-spin couplings in the spectrum of the original poly(vinyl chloride) are still observed in that of the highly chlorinated product. This fact shows that a considerable number of poly(vinyl chloride) sequences of certain lengths persist in the highly chlorinated polymer.     

Graft polymers from poly(vinyl chloride) and chlorinated rubber

Graft polymers from poly(vinyl chloride) (PVC) and chlorinated rubber (CIR) with side chains of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), or poly(ethyl methacrylate) (PEMA) were synthesized. For this purpose, a vinyl monomer was polymerized in the presence of small quantities of PVC or CIR with benzoyl peroxide as catalyst. The graft polymers were separated from both homopolymers by precipitation with methanol from methyl ethyl ketone solutions of the reaction products and the grafting efficiency was calculated. The graft polymers were characterized by infrared spectra, elemental analysis, NMR, and osmometric or light-scattering determinations. From the results it is concluded that the PVC or CIR molecules contain side chains of PMMA, PMA, or PEMA. The graft polymers showed higher molecular weights, and the values of second virial coefficient for these polymers were much different from those of the starting polymers.     

聚卤乙烯单体性质及构型对链柔性和极性的影响

基于旋转异构态模型和生成矩阵统计方法,推导了极性取代基高分子链均方回转半径和均方偶极矩改进的计算公式,应用于研究聚卤乙烯链构象和构型依赖的性质,包括均方回转半径和偶极矩特征比与构象能、链规整程度和温度的关系.发现构型规整的聚卤乙烯链特征比、温度系数和构象能依赖性质均呈现较大的差异,尤其是间同和全同构型链.如聚卤乙烯间同链偶极矩特征比随主要相互作用Eη变化比例在-0.62～0.05(J/mol)-1之间.相反,构型不规整的聚卤乙烯链的无扰尺寸则比较接近.聚氟乙烯、聚氯乙烯和聚溴乙烯无规链均方偶极矩特征比分别为0.80、0.69和0.59,均方偶极矩温度系数为-0.07×10-3～-0.53×10-3 K-1,与实验结果符合.研究结果表明聚卤乙烯单体性质和构型对其链柔性和链极性的影响是显著的.     

Pyrolysis-gas chromatography of polymers obtained by Friedel-Crafts reactions of poly(vinyl chloride) with aromatic compounds

Pyrolysis, in combination with gas-chromatography technique, was used in the determination of the structure and study of the thermal degradation mechanism of the condensation polymers obtained by Friedel-Crafts reactions of poly(vinyl chloride) with benzene, toluene, and naphthalene. The separation of the pyrolysis products was made using a column packed with chromosorb W (80–100 mesh) coated with 15% silicone SE-52. The identification of the pyrolysis products resulted as a consequence of the thermal decomposition of condensation polymers and their semiquantitative estimation led to the final conclusion that the initial normal chlorine substitution in the macromolecular chain of poly(vinyl chloride) is followed by an important intramolecular cyclization reaction yielding 1,3-methyleneindan units.     

Evolution of aromatic compounds in the thermal decomposition of vinyl polymers

The thermal decomposition products that evolve from poly(vinyl chloride) (PVC), poly(vinylbromide) (PVB), poly(vinyl alcohol) (PVA), and poly(vinylacetate) (PVAc) were analyzed by direct pyrolysis in the ion source of a mass spectrometer (MS). Our results indicate that in both stages of the decomposition process which occurred in the four vinyl polymers investigated several aromatic hydrocarbons were produced and that the relative amounts of benzene, napthalene, and anthracene were different in the two stages. This previously unreported information determines in a single scheme the thermal behavior of the title compounds.     

Statistical mechanical estimation of the entropy of fusion of linear vinyl polymers

The entropy of fusion of linear vinyl polymers [polypropylene, polystyrene, and poly(vinyl chloride)] having asymmetric carbon atoms was calculated on the basis of the rotational isomeric state model. The results are found to be in good agreement with the experimental entropies of fusion per bond for these polymers.     

Investigation of some vinyl polymers by pyrolysis—gas chromatography—mass spectrometry

Although much has been published on the thermal degradation behaviour and products of vinyl polymers, the possibilities of using gaschromatography—mass spectrometry in the investigation of pyrolysate composition have much to offer.Results for poly(vinyl chloride), poly(vinyl acetate), polystyrene and poly(α-methyl-styrene) homopolymers and styrene—acrylonitrile copolymer obtained by pyrolysis—gas chromatography—mass spectrometry are presented. Numerous additional fragments not previously specified have been determined. The possible mechanisms of their origin as regards the polymer chain structure are discussed.     

Immobilization of imidazolium cation based ionic liquids on thin polymer films

Methods of gravimetry, optical microscopy, FTIR spectroscopy, and conductometry were applied to the study of the adsorption of the following ionic liquids: 1-butyl-3-methylimidazolium chloride, bistrifluoromethylsulfonylimide, and trifluoroacetate on thin-layer films of polymers of different nature including polypropylene, polyethylene terephthalate, polytetrafluoroethylene, poly(vinyl chloride), and hydrated cellulose. It was established that the hydrated cellulose film can serve as polymer matrices for the ionconducting 1-butyl-3-methylimidazolium halide salts. The hydrated cellulose additive in the ionic liquids promotes their immobilization on the poly(vinyl chloride) film.     

Dynamics of structurally disordered poly(vinyl chloride)

Following our previous studies on poly(vinyl chloride) the influence of the existence of head-to-head defects on the vibrational properties and on the vibrational spectra of syndiotactic planar zig-zag poly(vinyl chloride) has been studied. The dynamical aspects and the spectroscopic consequences of the existence of such a kind of defects in an otherwise structurally regular polymer chain are discussed and some comments are made on the use of frequency correlations from model compounds for the interpretation of the infrared and Raman spectra of polymers. The dependency of a few characteristic frequencies on chain length is discussed.     

压电高分子材料

本文介绍了有关压电性高分子材料研究的新进展及近几年来对于聚偏腈乙烯、聚酰胺、聚氯乙烯、聚磷腈等压电性的研究结果,并就高分子偶极结构、结晶性等因素与其压电性的关系进行了讨论.