Dependence of the properties of fluorine-containing poly(phenylquinoxaline) on the method of its preparation

A method of synthesis of new fluorine-containing tetraamine, 2,2-bis[4-(3,4-diaminophenoxy) phenyl]hexafluoropropane, has been developed; the tetraamine has been used as the initial compound for preparing poly(phenylquinoxaline)s in both supercritical carbon dioxide and solution. Thermal characteristics of fluorine-containing poly(phenylquinoxaline)s have been studied. There is a bimodal particle size distribution at the used polymer concentration (C _pol = 0.1 wt %) according to dynamic laser light scattering data.     

Phase behavior of biodegradable amphiphilic poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide)

This study describes the miscibility phase behavior in two series of biodegradable triblock copolymers, poly(l-lactide)-block-poly(ethylene glycol)-block-poly(l-lactide) (PLLA-PEG-PLLA), prepared from two di-hydroxy-terminated PEG prepolymers (M_n = 4000 or 600 g mol⁻¹) with different lengths of poly(l-lactide) segments (polymerization degree, DP = 1.2-145.6). The prepared block copolymers presented wide range of molecular weights (800-25,000 g mol⁻¹) and compositions (16-80 wt.% of PEG). The copolymer multiphases coexistance and interaction were evaluated by DSC and TGA. The copolymers presented a dual stage thermal degradation and decreased thermal stability compared to PEG homopolymers. In addition, DSC analyses allowed the observation of multiphase separation; the melting temperature, T_m, of PLLA and PEG phases depended on the relative segment lengths and the only observed glass transition temperature (T_g) in copolymers indicated miscibility in the amorphous phase.     

Novel ABC2-type liquid-crystalline block copolymers with azobenzene moieties prepared by atom transfer radical polymerization

A series of novel ABC₂-type liquid-crystalline block copolymers with azobenzene moieties in the side chains were prepared by combination of atom transfer radical polymerization (ATRP) and the chemical modification reaction. First, the bromine-terminated diblock copolymer poly(ethylene oxide) monomethyl ether-block-polystyrene (MPEO-PS-Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO-Br, which was obtained from the esterification of MPEO and 2-bromoisobutyryl bromide. Then, the bromo end groups of the resulting MPEO-PS-Br were derivatized into twice as many bromoisobutyrates by the chain end modification reaction to obtain ω,ω′-bis(bromo)-PS-MPEO (MPEO-PS-Br₂). The azobenzene-containing blocks of poly[6-(4-methoxy-azobenzene-4′-oxy) hexyl methacrylate] (PMMAZO) with different molecular weights were introduced into the derivative diblock copolymer by a second ATRP to synthesize the novel ABC₂-type liquid-crystalline block copolymers poly(ethylene oxide) monomethyl ether-block-polystyrene-block-{poly[6-(4-methoxy-azobenzene-4′-oxy) hexyl methacrylate]}₂ [MPEO-PS-(PMMAZO)₂].     

Controlled Anionic Synthesis of Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate]

Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate] (poly(NCzMA)) with controlled molecular weight and narrow molecular weight distribution was successfully synthesized using (methyl methacryloyl)potassium (MMA) as a weak initiator in the presence of diethylzinc (Et₂Zn) in THF at –78°C. Et₂Zn acted both as an additive for the coordination with enolate anion and nitro group and as a scavenger to remove impurities. Block copolymers PMMA‐block‐poly(NCzMA)‐block‐PMMA and poly(NCzMA)‐block‐PS‐block‐poly(NCz‐MA), were also synthesized quantitatively (PMMA: poly(methyl methacrylate), PS: polystyrene). The results indicate that Et₂Zn can be used to synthesize the polymers of solid, nitro group‐containing methacrylate monomers by anionic polymerization in THF.     

Synthesis of urethane—acrylic multi-block copolymers via electrochemically mediated ATRP

The electrochemically mediated atom transfer radical polymerisation (eATRP) of n-butyl acrylate was investigated under a variety of catalyst concentrations. Poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers were prepared via electrochemically mediated atom transfer radical polymerisation (eATRP) using only 7 × 10^?6 mole % of Cu^II complex. The successful chain extension and formation of penta-block copolymers confirmed the living nature of the poly(alkyl acrylates) prepared by eATRP. In this work, the tri-block and penta-block urethane-acrylate copolymers were synthesised for the first time by using tertiary bromine-terminated polyurethane macro-initiators as transitional products reacting with n-butyl acrylate, and subsequently with tert-butyl acrylate in the presence of the Cu^IIBr₂/TPMA catalyst complex. The results of ¹H NMR spectral studies support the formation of tri-block poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers, and penta-block poly(tert-butyl acrylate)-block-poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate)-block-poly(tert-butyl acrylate) copolymers.     

Coordination Homopolymerization of ω–undecenyl Poly(styrene-block-isoprene) Macromonomers in the Presence of CGC-Ti/MAO Complexes

This paper deals with the coordination homopolymerization of ω–undecenyl poly(styrene-block-isoprene) macromonomers. The synthesis of the macromonomers made use of an anionic living poly(styrene-block-isoprene) copolymer which is deactivated at low temperature by 11-bromo-1-undecene. The ability of these macromonomers to get involved in coordination homopolymerization in the presence of selected titanium catalysts was discussed. Special emphasis was given to the influence of polymerization temperature, macromonomer molar mass and concentration on the yield of homopolymerization and average degree of polymerization (DP_n). In the presence of the CGC-Ti/MAO catalyst, macromonomer conversion, determined by SEC, was between 35 to 52 wt.-%, and DP_n was between 5 to 14 depending upon the experimental conditions. However, as revealed by SEC/LS, the resulting comb-shaped polymers (PE-graft-(PI-block-PS), are characterized by sharp molar distributions. Increasing macromonomer molar mass, led to only a slight decrease of DP_n whereas conversion increased moderately. Other titanium catalysts such as CpTiCl₃/MAO and Cp*TiCl₃/MAO only caused macromonomer dimerization.     

Transparent titanium dioxide/block copolymer modified epoxy-based systems in the long scale microphase separation threshold

Microphase separated epoxy-based materials modified with an amphiphilic poly(styrene-block-ethylene oxide) diblock copolymer (PS-b-PEO) with low amount of PEO-block as well as ternary systems modified with this block copolymer and containing via sol–gel in situ synthesized TiO₂ nanoparticles were prepared and characterized. The obtained results indicate that block copolymer had enough amount of PEO-block in order to achieve microphase separated materials for a high range of PS-b-PEO contents, morphologies changing from spherical micelles to long wormlike micelles passing through vesicles upon increasing copolymer amounts. In the case of 20 wt.% inorganic/organic epoxy-based materials, addition of synthesized TiO₂ nanoparticles into PS-b-PEO-(DGEBA/MCDEA) system led to location of the nanoparticles in PEO-block/epoxy-rich confined between two microphase separated PS-block-rich phases. Designed highly transparent multiphase inorganic/organic epoxy-based materials possess interesting specific properties such as high UV shielding efficiency and high water repellence.     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

Synthesis and characterization of thermoresponsive amphiphilic block copolymers incorporating a poly(ethylene oxide‐stat‐propylene oxide) block

Amphiphilic BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH diblock and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐block‐PLA‐OH triblock copolymers incorporating thermoresponsive poly(ethylene oxide‐stat‐propylene oxide) (PEO‐stat‐PPO) blocks were prepared by ring‐opening polymerization of lactide (LA) initiated by macroinitiators formed from treating BuO‐(PEO‐stat‐PPO)‐OH and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH with AlEt₃. MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH was prepared by coupling MeO‐PEO‐OH and HO‐(PEO‐stat‐PPO)‐OH, followed by chromatographic purification. The cloud points of 0.2% aqueous solutions are between 36 and 46 °C for the diblock copolymers that contain a 50 wt % EO thermoresponsive block and 78 °C for the triblock copolymer that contains a 75 wt % EO thermoresponsive block. Variable temperature ¹H NMR spectra recorded on D₂O solutions of the diblock copolymers display no PLA resonances below the cloud point and fairly sharp PLA resonances above the cloud point, suggesting that desolvation of the thermoresponsive block increases the miscibility of the two blocks. Preliminary characterization of the micelles formed in aqueous solutions of BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH conducted using laser scanning confocal microscopy and pulsed gradient spin echo NMR point to significant changes in the size of the micellar aggregates as a function of temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5156–5167, 2005     

Self-assembled tri-block terpolymer blend membranes reinforced with poly(methyl methacrylate)-coated gold nanoparticles obtained through phase inversion technique

The blend membranes of polystyrene-block-polyisoprene-block-polystyrene and polyethylene-block-poly(ethylene glycol)-block-polycaprolactone were designed using the phase inversion technique. The poly(methyl methacrylate)-coated gold nanoparticles are around 40–50 nm in size. The honeycomb-shaped nanopores were uniformly dispersed in polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles blend membranes. There was a 16% increase in tensile strength and a 33% increase in tensile modulus of polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles 1 relative to the neat membrane. With 1 wt% nanoparticles, the membrane showed a higher water flux of 59.2 mL cm^?2 min^?1 and a salt rejection ratio of 25.4%, while the polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone membrane without poly(methyl methacrylate)-coated gold nanoparticles had lower flux (43.8 mL cm^?2 min^?1) and salt rejection (18.5%).     

Photocrosslinked poly(vinylbenzophenone)‐core micelles via mild Friedel–Crafts benzoylation of polystyrene amphiphiles

Photocrosslinkable poly(vinylbenzophenone)‐containing polymers were synthesized via a one‐step, Friedel–Crafts benzoylation of polystyrene‐containing starting materials [including polystyrene, polystyrene‐block‐poly(tert‐butyl acrylate), polystyrene‐block‐poly(ethylene oxide), polystyrene‐block‐poly(methyl methacrylate), and polystyrene‐block‐poly(n‐butyl acrylate)] with benzoyl trifluoromethanesulfonate as a benzoylation reagent. The use of this mild reagent (which required no added Lewis acid) permitted polymers with well‐defined compositions and narrow molecular weight distributions to be synthesized. Micelles formed from one of these benzoylated polymers, [polystyrene_0.25‐co‐poly(vinylbenzophenone)_0.75]₁₁₅‐block‐poly(acrylic acid)₁₄, were then fixed by the irradiation of the micelle cores with UV light. As the irradiation time was increased, the pendent benzophenone groups crosslinked with other chains in the glassy micelle cores. Dynamic light scattering, spectrofluorimetry, and Fourier transform infrared spectroscopy were all used to verify the progress of the crosslinking reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2604–2614, 2006     

New multiblock poly(ether-ester)s based on poly(trimethylene terephthalate) as rigid segments

A series of novel poly(trimethylene terephthalate)-block-poly(tetramethylene oxide) (PTT--PTMO) segmented block copolymers were synthesised by transesterification in the melt of dimethyl terephthalate, 1,3-propanediol and poly(tetramethylene oxide) glycol (PTMO, 1000 g/mol). A range of multiblock copolymers were synthesized, with flexible PTMO segments contents varying from 20 to 80 wt%. The novel poly(ether-block-ester)s were characterized by using viscometry, hardness measurements, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and tensile properties.     

Polymer Blend for Electrolyte and Electrode Coatings

Summary: The thermal and morphological properties of PEO/copolyether electrolyte and carbon black composite have been studied. A copolyether poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) bis(2-aminopropyl ether) was used at 20 wt.-% in relation to PEO in order the improve the carbon black dispersion through interaction with the amino end capped function. The polymer matrix presented semicrystalline structure and the addition of LiClO₄ and carbon black decreases significantly the crystallinity of the system. Sub-micrometric dispersion of carbon black was observed. The conductivity results as a function of temperature exhibited a typical VTF behaviour for the electrolyte. Almost constant conductivities of 2 × 10⁻⁴ S · cm⁻¹ were observed for the composite with 5 wt.-% of carbon black, in the range of temperature between 35 and 95 °C, which indicates a significantly contribution of electronic conduction.     

Synthesis and study of block copolycondensates containing polysiloxane and unsaturated polyester blocks in the chain. II. Poly(unsaturated esters-b-siloxanes) with blocks linked by Si?C bonds and poly(butadienes-b-siloxanes)

Poly(unsaturated esters-b-siloxanes) whose blocks are linked by Si? C bonds and poly(butadienes-b-siloxanes) have been obtained by polycondensation of ω,ω′-diepoxy polydimethylsiloxanes and ω,ω′-dicarboxylic poly(unsaturated esters). The reaction between polysiloxanes with Si? H end groups and allylepoxy has been studied; the resulting ω,ω-diepoxy polysiloxanes have the expected structure. The polycondensation of oligomers with, respectively, epoxy and carboxylic end groups has been studied and the optimal conditions established. The samples with Si? C bonds are not affected by hydrolysis in pure water. The poly(siloxanes-b-unsaturated esters) can be cured by UV light.     

Synthesis of biodegradable thermoplastic elastomers from ε‐caprolactone and lactide

This article reports the synthesis and the properties of novel thermoplastic elastomers of A‐B‐A type triblock copolymer structure, where the hard segment A is poly(l ‐lactide) (PLLA) and the soft segment B is poly(ε‐caprolactone‐stat‐d ,l ‐lactide) (P(CL‐stat‐DLLA)). The P(CL‐stat‐DLLA) block with DLLA content of 30 mol % was applied because of its amorphous nature and low glass transition temperature (T_g = approximately ?40 °C). Successive polymerization of l ‐lactide afforded PLLA‐block‐P(CL‐stat‐DLLA)‐block‐PLLAs, which exhibited melting temperature (T_m = approximately 150 °C) for the crystalline PLLA segments and still low T_g (approximately ?30 °C) of the soft segments. The triblock copolymers showed very high elongation at break up to approximately 2800% and elastic properties. The corresponding d ‐triblock copolymers, PDLA‐block‐P(CL‐stat‐DLLA)‐block‐PDLAs (PDLA = poly(d ‐lactide)) were also prepared with the same procedure using d ‐lactide in place of l ‐lactide. When the PLLA‐block‐P(CL‐stat‐DLLA)‐block‐PLLA was blended with PDLA‐block‐P(CL‐stat‐DLLA)‐block‐PDLA, stereocomplex crystals were formed to enhance their T_m as well as tensile properties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 489–495     

Complexation and eutectic crystallization in poly(2-vinyl pyridine)-block-poly(ε-caprolactone) and pentadecylphenol mixtures

Crystallization behavior via hydrogen bonding interaction in amphiphilic block copolymer/surfactant mixtures consisting of poly(2-vinyl pyridine)-block-poly(ε-caprolactone) (P2VP-PCL) and 3-pentadecylphenol (PDP) were investigated by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The P2VP-PCL/PDP mixtures exhibit eutectic crystallization behavior; the eutectic composition is approximately at 70 wt.% PDP. Scanning probe microscopy (SPM) observation revealed the microphase structure in the P2VP-PCL/PDP mixtures and the unique eutectic morphology at the eutectic composition, which was further confirmed by small angle X-ray scattering (SAXS) results. To our knowledge, this is the first example of eutectic crystallization observed in amphiphilic block copolymer/surfactant systems. The FTIR study proved that there are competitive hydrogen bonding interactions between P2VP block/PDP and PCL block/PDP pairs in the P2VP-PCL/PDP mixtures. On the basis of the SPM results and FTIR study, a model describing the microstructure of the P2VP-PCL/PDP eutectic mixtures is proposed. The amorphous P2VP blocks are expelled from the ordered eutectic lamellae formed by the crystalline PCL blocks and PDP, which deviates remarkably from the existing structural model proposed by other authors for poly(vinyl pyridine)/PDP and poly(styrene-block-4-vinyl pyridine)/PDP mixtures.     

Synthesis and hydrogel formation of fluorine‐containing amphiphilic ABA triblock copolymers

Fluorine‐containing amphiphilic ABA triblock copolymers, poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether) [poly(HOVE‐b‐PFPOVE‐b‐HOVE)] (HFH), poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether] [poly(PFPOVE‐b‐HOVE‐b‐PFPOVE)] (FHF), and poly(n‐butyl vinyl ether)‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly(n‐butyl vinyl ether) [poly(NBVE‐b‐HOVE‐b‐NBVE)] (LHL), were synthesized, and their behavior in water was investigated. The aforementioned polymers were prepared by sequential living cationic polymerization of 2‐acetoxyethyl vinyl ether (AcOVE) and PFPOVE or NBVE, followed by hydrolysis of acetyl groups in polyAcOVE. FHF and LHL formed a hydrogel in water, whereas HFH gave a homogeneous aqueous solution. In addition, the gel‐forming concentration of FHF was much lower than that of corresponding LHL. Surface‐tension measurements of the aqueous polymer solutions revealed that all the triblock copolymers synthesized formed micelles or aggregates above about 1.0 × 10^?4 mol/L. The surface tensions of HFH and FHF solutions above the critical micelle concentration were lower than those of LHL, indicating high surface activity of fluorine‐containing triblock copolymers. Small‐angle X‐ray scattering measurements revealed that HFH formed a core‐shell sperical micelle in 1 wt % aqueous solutions, whereas the other block copolymers caused more conplicated assembly in the solutions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3751–3760, 2001     

Multiple melting behaviour of poly(3-hydroxybutyrate-co-hydroxyvalerate) using step-scan DSC

Melting behaviour and crystal morphology of poly(3-hydroxybutyrate) (PHB) and its copolymer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with various hydroxyvalerate (HV) contents [5 wt.% (PHB5V), 8 wt.% (PHB8V) and 12 wt.% (PHB12V)] have been investigated by conventional DSC, step-scan differential scanning calorimetry (SDSC), wide angle X-ray diffraction (WAXRD) and hot stage polarised optical microscopy (HSPOM). Crystallisation behaviour of PHB and its copolymers were investigated by isothermal crystallisation kinetics. Thermal properties were investigated after isothermal crystallisation treatment. Multiple melting peak behaviour was observed for all polymers. SDSC data revealed that PHB and its copolymers undergo melting-recrystallisation-remelting during heating, as evidenced by exothermic peaks in the IsoK baseline (C_p,IsoK, non-reversing signal). An increase in degree of crystallinity due to significant melt-recrystallisation was observed for isothermally crystallised polymers. SDSC proved a convenient and precise method for measurement of the apparent thermodynamic specific heat (C_p,ATD, reversing signal). PHB and PHBV showed different crystal morphologies for similar crystallisation condition. HSPOM results showed that the crystallisation rates reduced and sizes of spherulites were significantly increased as HV content increased.     

Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator

Hyperbranched-linear star block copolymers, hyperbranched poly(siloxysilane)-block-polystyrene (HBPS-b-PSt), were prepared by atom transfer radical polymerization (ATRP) of styrene in xylene, using bromoester-terminated HBPS (HBPS-Br (P3), M_n = 7500, M_w/M_n = 1.76) as a macroinitiator. The number-average molecular weights of the obtained polymers (M_n) were in the range of 21,800-60,000 and molecular weight distributions were unimodal throughout the reaction (M_w/M_n = 1.28-1.40). These polymers showed 5 wt.% decomposition temperature (T_d5) over 300 °C. The DSC thermograms of the resulting polymers indicated two glass transition temperatures (T_g). The T_g of HBPS segment shifted to higher value while the T_g of PSt segment shifted to lower value compared with those of the homopolymers. Preliminary physical characterization related to the solution viscosity of the resulting block copolymers is also reported.     

Crystallization of titania ultra-fine particles from peroxotitanic acid in aqueous solution in the present of polymer and incorporation into poly(methyl methacylate) via dispersion in organic solvent

We report a novel strategy for incorporation of titanium dioxide (TiO₂) particles, which were crystallized from peroxotitanic acid in the presence of hydrophilic polymer by hydrothermal treatment in aqueous solution, into poly(methyl methacrylate) (PMMA) via dispersion into chloroform. Dispersion of TiO₂ particles into chloroform was achieved by solvent change from water to chloroform in aid of amphiphilic polymer dispersant, poly(N-vinyl pyrrolidone) (PVP), poly(N-vinyl pyrrolidone-co-methyl methacrylate) (PVP-co-PMMA), poly(N-vinyl pyrrolidone-block-methyl methacrylate) (PVP-b-PMMA) through azeotropical removal of water. Incorporation of TiO₂ particles into PMMA was carried out by a casting process of a mixture of TiO₂ particles dispersed with PVP₁₅₄-b-PMMA₁₅₆ in chloroform and PMMA on a glass substrate. Resultant hybrid film containing TiO₂ less than 10 wt.% showed high transparency in visible region attributable to homogeneous dispersion into PMMA matrix. The refractive index of the hybrid films increased with TiO₂ content and agreed with the calculated values.