Hydrogen-bonded liquid-crystalline complexes of polyester containing a pyridyl moiety with 4-(alkoxy)benzoic acid

Novel hydrogen-bonded polyester complexes from mesogenic 4-(butyloxy)benzoic acid (2a), 4-(octyloxy)benzoic acid (2b), 4-(dodecyloxy)benzoic acid (2c) and 4-(tetradecyloxy)benzoic acid (2d) as the hydrogen bond donors and a polyester (3) based on 2,6-pyridine dicarboxylic acid as the hydrogen bond acceptor were prepared by the melt method. The association by hydrogen bonding was confirmed by means of FTIR. The components were miscible up to 0.1 mole ratio of 2d and 2c versus the polyester repeat unit. The limiting mole ratio for 2b and 2a to 3 were 0.2 and 0.4, respectively. Phase separation in the supramolecular complexes occurred above these limiting values and a two phase system consisting of a polyester supramolecular complex and 4-(alkyloxy)benzoic acid was formed. This was due to weak hydrogen bonding between the low molecular acid (especially the acid with longer terminal alkoxy group) and pyridyl unit of polyester in comparison with thermodynamically more favorable dimerization of acid molecules. The liquid crystalline behavior of these supramolecular polymeric complexes was confirmed by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). It was found that 2a exhibits no mesomorphism when mixed with polyester. However, among the other acid derivatives, 2b exhibited stable mesogenic complexes.     

Preparative synthesis of 3- and 4-(3-alkoxy-4-acyloxyphenylmethylamino)benzoic acids

Reduction of 3- and 4-[(3-alkoxy-4-acyloxyphenyl)methylideneamino]benzoic acids (E isomers) with sodium triacetoxyhydridoborate in benzene gave the corresponding 3- and 4-(3-alkxy-4-acyloxyphenylmethyl) benzoic acids in preparative yields.     

Preparation of (R)- and (S)-4-chloro-3-acetoxybutyronitrile using microbial resolution

A new preparation of optically active 4-chloro-3-acetoxybutyronitrile (AcBN) was developed using the resting cells of bacteria. The resolution was based on enantioselective hydrolysis of the ester function of the substrate. (R)-AcBN was prepared using Pseudomonas sp. DS-K-717, and the resulting (R)-AcBN was obtained with high enantiomeric excess of >98% with a yield of 36% during the microbial resolution step. (S)-AcBN was prepared in the same manner using the resting cells of Pseudomonas sp. DS-K-19 and showed a high enantiomeric excess of >98% with a yield of 32%. The enzyme activity was enhanced and induced by the addition of AcBN, particularly the (R)-ester hydrolysis, which was enhanced 20-fold.     

The synthesis of 4-(2,6,10-trimethyl-1,3,5,9-undecatetraenyl)benzoic acid based on alkoxy alkene-acetal condensation

4-(2,6,10-Trimethyl-1,3,5,9-undecatetraenyl)benzoic acid (1) was synthesized starting from ethyl 4-formylbenzoate (2) and linalool. The key intermediate, ethyl 4-(2-methyl-3-oxo-1-propenyl)benzoate (5), was obtained by the addition of diethyl acetal (3), prepared from2, to ethyl 1-propenyl ether (EPE) followed by the hydrolysis of the resulting adduct.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 914–915, May, 1993.     

New polymer syntheses 16. LC-copolyesters of 3-(4-hydroxyphenyl) propionic acid and 4-hydroxy benzoic acids

The polycondensation of 3-(4-hydroxy phenyl)-propionic acid, 4-Hypp, by means of acetanhydride or acetylchloride was conducted either in the presence or in the absence of a liquid reaction medium. DSC measurements, polarizing microscope, and X-ray diffraction studies indicate poly(4-Hypp) possesses at about 215°C a reversible first order transition between two solid phases. Copolyesters containing various mole ratios of 4-Hypp and 4-hydroxy benzoic acid, 4-Hybe, were prepared by bulk condensation with acetanhydride at 320°C. At 4-Hypp/4-Hybe ratios less than 1.0:1.5 the reaction product was heterogeneous, containing crystals of pure poly(4-Hybe). Neither increasing the reaction time nor the variation of the transesterification catalyst resulted in an entirely homogeneous copolyester. However, for 4-Hypp/4-Hybe ratios greater than 1.0:1.5, ¹³C NMR spectra indicate perfectly random sequences. Also, terpolyesters containing 3-chloro-4-hydroxy- or 3,5-dichloro-4-hydroxy-benzoic acid were heterogeneous with less than 30 mol % 4-Hypp. DSC measurements revealed for all polyesters a glass transition in the range of 55–78°C. Temperature dependent X-ray diffraction studies confirm that the solid phase is a s.c. LC-glss. Correspondingly low heat distortion temperatures were found by thermomechanical analyses. The copolyesters display under the polarizing microscope LC-phase up to temperatures of 450–480°C, where rapid thermal degradation prevents further investigations. In the case of the 4-Hypp/4-Hybe 1:1 copolyester, the LC-phase extends over a temperature range of about 400°C. TGA measurements indicate beginning thermal degradation at temperatures between 350 and 380°C.     

New polymer syntheses. LXVI. Copolyester of 4-hydroxybenzoic acid and 3-(4'-hydroxyphenoxy)benzoic acid or 4-(3'-hydroxyphenoxy)benzoic acid

Copolyesters of 4-hydroxybenzoic acid (HBA) and 3-(4'-hydroxyphenoxy)benzoic acid were prepared by two different procedures. Either the acetyl derivatives were polycondensed in bulk at temperatures up to 300°C or they were polycondensed in an inert reactions medium (Marlotherm-S) at 340°C. Two analogous series of copolyesters were synthesized from 4-acetoxybenzoic acid (4-HBA) and 4-(3'-acetoxyphenoxy)benzoic acid. The copolyesters were characterized by elemental analyses, inherent viscosities, ¹H- and ¹³C-NMR spectroscopy, WAXS and DSC measurements, and by optical microscopy. All copolyesters synthesized in solution were highly crystalline materials which were neither meltable nor soluble. Part of the copolyesters prepared by polycondensation in bulk were semi-crystalline, meltable, and soluble. The copolyester derived from 3-(4'-hydroxyphenoxy)benzoic acid proved to be thermotropic forming a nematic melt, whereas the isomeric copolyesters of 4-(3'-hydroxyphenoxy)benzoic acid only formed isotropic melts. © 1993 John Wiley & Sons, Inc.     

Synthesis of n-(2-chloro-5-bromo-4-pyrimidyl)- and N-(2-chloro-5-iodo-4-pyrimidyl)amino acids

The previously unreported N-(2-chloro-5-bromo-4-pyrimidyl)- and N-(2-chloro-5-iodo-4-pyrimidyl) amino acids were synthesized.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 527–529, April, 1971.     

β-(2-hydroxy-4-chloro-3-quinolyl)propiolactone

2,4-Dihydroxy-3-(3,3-dichloroallyl)quinoline, the corresponding 4-mono and 2,4-dichloro derivatives, and substituted -(3-quinolyl)propionic acids were synthesized. -(2-Hydroxy-4-chloro-3-quinolyl) propiolactone was obtained from the latter.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 975–977, July, 1972.     

Regioselectivities in deprotonation of 2-(4-chloro-2-pyridyl)benzoic acid and corresponding ester and amide

Upon treatment of ethyl 2-(4-chloro-2-pyridyl)benzoic acid, 2-(4-chloro-2-pyridyl)benzoate, and N,N-diisopropyl-2-(4-chloro-2-pyridyl)benzamide with LTMP at −75 °C in THF, the lithio derivatives at C5′ are generated regiospecifically, as demonstrated by subsequent quenching with electrophiles. The lithio derivative at C3′ is only evidenced from the benzamide at higher temperature (−50 °C), when treated with LTMP in THF; it instantly cyclizes to 1-chloro-4-azafluorenone. The latter is converted to onychine, an alkaloid endowed with anticandidal activity.     

Preparation and X-ray structures of 3-[Bis(trifluoroacetoxy)iodo]benzoic acid and 3-[hydroxy(tosyloxy)iodo]benzoic acid: new recyclable hypervalent iodine reagents

Preparation, structural characterization, and reactivity of 3-[bis(trifluoroacetoxy)iodo]benzoic acid and 3-[hydroxy(tosyloxy)iodo]benzoic acid, new recyclable iodine(III) reagents derived from 3-iodosylbenzoic acid, are described. The reduced form of these reagents, 3-iodobenzoic acid, can be easily recovered from the reaction mixtures using ion-exchange resin or basic aqueous workup followed by acidification with HCl.     

Synthesis of 5-alkyl(aryl)sulfanyl-4-chloro-3-trichloromethyl-1,2-thiazoles and 5-Alkyl(aryl)sulfanyl-4-chloro-1,2-thiazole-3-carboxylic acids

Butane-, phenylmethane-, and benzenethiols reacted with 4,5-dichloro-3-trichloromethyl-1,2-thiazole in the presence of sodium ethoxide to give the corresponding 5-alkyl(aryl)sulfanyl-4-chloro-3-trichloromethyl-1,2-thiazoles. The reaction of 4,5-dichloro-1,2-thiazole-3-carboxylic acid with the same thiols under similar conditions resulted in the formation of sodium 4,5-dichloro-1,2-thiazole-3-carboxylate, while in the presence of pyridine 5-alkyl(aryl)sulfanyl-4-chloro-1,2-thiazole-3-carboxylic acids were obtained.     

Photocyclisation of 3-alkoxy-6-chloro-2-(3-methylthiophen-2-yl)-4H-chromen-4-ones

Photocyclisation of 3-alkoxy-6-chloro-2-(3-methylthiophen-2-yl)-4H-chromen-4-ones in methanol with pyrex filtered UV-light lead to the formation of tetracyclic compounds through intramolecular γ-hydrogen abstraction. The methyl group on the thiophenyl ring does not interfere in the photocyclisation although it does effect the product formation.     

One-pot synthesis of 2-（1-acyloxypentyl） benzoic acids

A one-pot synthesis of 2-（1-acyloxypcntyl） benzoic acids by trapping the carboxylatc/alkoxide dianion with acylating reagents following Grignard addition with n-BuMgBr to 2-formylbcnzoic acid was described. Compared with routine synthetic method, this novel procedure has the advantage of convenient operation and higher yields.     

Unprecedented conversion of (Z)-3-chloro-3-arylacrylic acids to benzoic acids: synthesis of s-triazolo[3,4-b][1,3,4]thiadiazoles

An unprecedented method for the conversion of (Z)-3-chloro-3-arylacrylic acids to corresponding benzoic acids by stirring in POCl₃ at 80 °C is reported. The benzoic acids formed in situ undergo condensation with 4-amino-5-aryl-3-mercapto-1,2,4-triazoles to yield s-triazolo[3,4-b][1,3,4]thiadiazoles in high yields.     

4-(3-Dialkylamino-2,5-dioxopyrrolidin-1-yl)benzoic acid esters

Reactions of alkyl 4-aminobenzoates with maleic anhydride give the corresponding alkyl 4-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)benzoates, and the latter are converted into 4-(3-dialkylamino-2,5-dioxo-2,3,4,5-tetrahydro-1H-pyrrol-1-yl)benzoates by treatment with secondary amines.     

4-取代苯次甲亚胺-5-(1-苯基-3-甲基-5-氯吡唑)-2H-1,2,4-三唑-3-硫酮的合成

以乙醇为溶剂,冰醋酸为催化剂,4-氨基-5-(1-苯基-3-甲基-5-氯吡唑)-1,2,4-三唑-3-硫酮(1)与芳醛经缩合反应合成了7个新型的4-取代苯次甲亚胺-5-(1-苯基-3-甲基-5-氯吡唑)-4H-1,2,4-三唑-3-硫酮(3a~3g),收率66%~74%,其结构经1H NMR,IR及元素分析表征。合成4-(苯次甲亚胺)-5-(1-苯基-3-甲基-5-氯吡唑)-2H-1,2,4-三唑-3-硫酮(3a)的最佳反应条件为:以乙醇为溶剂,乙酸为催化剂,1 10 mmol,n(苯甲醛)∶n(1)=1.2,于75℃反应3 h,产率74%。     

可再生高价碘试剂4-二氯碘苯甲酸的合成及其氧化性能

以对碘苯甲酸为原料,采用“一锅法”合成高价碘试剂4-二氯碘苯甲酸（1）,其结构经¹H NMR和IR确证。考察了其对取代苯甲醇的氧化性能。结果表明：1对4-(二甲氨基)苄醇的氧化性能最高,收率93%。