Polyhedral metallaheteroborane chemistry. Synthesis, spectroscopy, structure and dynamics of eleven-vertex {RhNB(9)} and {PtCB(9)} metallaheteroboranes

Reaction between [RhCl(PPh(3))(3)] and the [nido-6-NB(9)H(11)](-) anion in CH(2)Cl(2) yields orange eleven-vertex [8,8-(PPh(3))(2)-nido-8,7-RhNB(9)H(11)]. Reaction of the [nido-6-CB(9)H(12)](-) anion with [cis-PtCl(2)(PMe(2)Ph)(2)] in methanol affords yellow eleven-vertex [9-(OMe)-8,8-(PMe(2)Ph)(2)-nido-8,7-PtCB(9)H(10)], which is also formed from the reaction of MeOH with [8,8-(PPh(3))(2)-nido-8,7-PtCB(9)H(10)]. Both compounds have been characterised by single-crystal X-ray diffraction analysis and examined by NMR spectroscopy and have structures based on eleven-vertex nido-type geometries, with the metal centre and the heteroatoms in the adjacent (8)- and (7)-positions on the pentagonal open face. The metal-to-heteroborane bonding sphere of is fluxional, with a DeltaG(double dagger) value of 48.4 kJ mol(-1). DFT calculations on the model compounds [8,8-(PH(3))(2)-nido-8,7-RhNB(9)H(11)] and [8,8-(PH(3))(2)-nido-8,7-RhSB(9)H(10)] have been carried out to define the fluxional process and the intermediates involved.     

Phosphine-boranes as bidentate ligands: formation of [8,8-eta(2)-(eta(2)-(BH(3)).dppm)-nido-8,7-RhSB(9)H(10)] and [9,9-eta(2)-(eta(2)-(BH(3)).dppm)-nido-9,7,8-RhC(2)B(8)H(11)] from [8,8-(eta(2)-dppm)-8-(eta(1)-dppm)-nido-8,7-RhSB(9)H(10)] and [9,9-(eta(2)-dppm)-9-(eta(1)-dppm)-nido-9,7,8-RhC(2)B(8)H(11)], respectively

The two clusters [8,8-(eta(2)-dppm)-8-(eta(1)-dppm)-nido-8,7-RhSB(9)H(10)] (1) and [9,9-(eta(2)-dppm)-9-(eta(1)-dppm)-nido-9,7,8-RhC(2)B(8)H(11)] (2) (dppm = PPh(2)CH(2)PPh(2)), both of which contain pendant PPh(2) groups, react with BH(3).thf to afford the species [8,8-eta(2)-(eta(2)-(BH(3)).dppm)-nido-8,7-RhSB(9)H(10)] (3) and [9,9-eta(2)-(eta(2)-(BH(3)).dppm))-nido-9,7,8-RhC(2)B(8)H(11)] (4), respectively. These two species are very similar in that they both contain the bidentate ligand [(BH(3)).dppm], which coordinates to the Rh center via a PPh(2) group and also via a eta(2)-BH(3) group. Thus, the B atom in the BH(3) group is four-coordinate, bonded to Rh by two bridging hydrogen atoms, to a terminal H atom, and to a PPh(2) group. At room temperature, the BH(3) group is fluxional; the two bridging H atoms and the terminal H atom are equivalent on the NMR time scale. The motion is arrested at low temperature with DeltaG++ = ca. 37 and 42 kJ mol(-1), respectively, for 3 and 4. Both species are characterized completely by NMR and mass spectral measurements as well as by elemental analysis and single-crystal structure determinations.     

Square-planar rhodium(I) complexes partnered with [arachno-6-SB(9)H(12)]- : a route toward the synthesis of new rhodathiaboranes and organometallic/thiaborane salts

Treatment of [RhCl(eta4-diene)]2 (diene = nbd, cod) with the N-heterocyclic ligands 2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (Me2bpy), 1,10-phenanthroline (phen), and pyridine (py) followed by addition of Cs[arachno-6-SB9H12] affords the corresponding salts, [Rh(eta4-diene)(L2)][SB9H12] [diene = cod, L2 = bpy (1), Me2bpy (3), phen (5), (py)2 (7); diene = nbd, L2 = bpy (2), Me2bpy (4), phen (6), (py)2 (8)]. These compounds are characterized by NMR spectroscopy and mass spectrometry, and in addition, the cod-Rh species 1 and 3 are studied by X-ray diffraction analysis. These saltlike reagents are stable in the solid state, but in solution the rhodium(I) cations, [Rh(eta4-diene)(L2)]+, react with the polyhedral anion [SB9H12]- leading to a chemistry that is controlled by the d8 transition element chelates. The nbd-Rh(I) complexes react faster than the cod-Rh(I) counterparts, leading, depending on the conditions, to the synthesis of new rhodathiaboranes of general formulas [8,8-(L2)-nido-8,7-RhSB9H10] [L2 = bpy (9), Me2bpy (10), phen (11), (py)2 (12)] and [8,8-(L2)-8-(L')-nido-8,7-RhSB9H10] [L' = PPh3, L2 = bpy (13), Me2bpy (14), phen (15); L' = NCCH3, L2 = bpy (16), Me2bpy (17), phen (18)]. Compound 13 is characterized by X-ray diffraction analysis confirming the 11-vertex nido-structure of the rhodathiaborane analogues 14-18. In dichloromethane, 1 and 3 yield mixtures that contain the 11-vertex rhodathiaboranes 9 and 10 together with new species. In contrast, the cod-Rh(I) reagent 5 affords a single compound, which is proposed to be an organometallic rhodium complex bound exo-polyhedrally to the thiaborane cage. In the presence of H2(g) and stoichiometric amounts of PPh3, the cod-Rh(I) reagents, 1, 3, and 5, afford the salts [Rh(H)2(L2)(PPh3)2][SB9H12] [L2 = bpy (19), Me2bpy (20), phen (21)]. Similarly, in an atmosphere of CO(g) and in the presence of PPh3, compounds 1-6 afford [Rh(L2)(PPh3)2(CO)][SB9H12] (L2 = bpy (22), Me2bpy (23), phen (24)]. The structures of 19 and 24 are studied by X-ray diffraction analysis. The five-coordinate complexes [Rh(L2)(PPh3)2(CO)]+ undergo PPh3 exchange in a process that is characterized as dissociative. The observed differences in the reactivity of the nbd-Rh(I) salts versus the cod-Rh(I) analogues are rationalized on the basis of the higher kinetic lability of the nbd ligand and its faster hydrogenation relative to the cod diene.     

Alkene hydrogenation on an 11-vertex rhodathiaborane with full cluster participation

The facile synthesis of the metallaheteroborane [8,8-(PPh 3) 2- nido-8,7-RhSB 9H 10] ( 1) makes possible the systematic study of its reactivity. Addition of pyridine to 1 gives in high yield the 11-vertex nido-hydridorhodathiaborane [8,8,8-(PPh 3) 2H-9-(NC 5H 5)- nido-8,7-RhSB 9H 9] ( 2). 2 reacts with C 2H 4 or CO to form [1,1-(PPh 3)(L)-3-(NC 5H 5)- closo-RhSB 9H 8] [L = C 2H 4 ( 3), CO ( 4)]. In CH 2Cl 2 at reflux temperature 2 undergoes a nido to closo transformation to afford [1,1-(PPh 3) 2-3-(NC 5H 5)- closo-1,2-RhSB 9H 8] ( 5). Reaction of 2 with alkenes leads to hydrogenation and isomerization of the olefins. NMR spectroscopy indicates the presence of a labile phosphine ligand in 2, and DFT calculations have been used to determine which of the two phosphine groups is labile. Rationalization of the hydrogenation mechanism and the part played by the 2 --> 3 nido to closo cluster change during the reaction cycle is suggested. In the proposed mechanism the classical hydrogen transfer from hydride metal complexes to olefins occurs twice: first upon coordination of the alkene to the rhodium centre in 2, and second concomitant with formation of a closo-hydridorhodathiaborane intermediate by migration of a BHB-bridging hydrogen atom to the metal. Reaction of H 2 with 3 or 5 regenerates 2, closing a reaction cycle that under catalytic conditions is capable of hydrogenating alkenes. Single-site versus cluster-bifunctional mechanisms are discussed as possible routes for H 2 activation.     

Facile two-electron reduction of a closo-rhodathiadecaborane

Closo-to-arachno redox flexibility in metallaheteroboranes may be viewed as a metal-to-ligand cooperative action with application in catalysis. The treatment of [PSH][arachno-4-SB(8)H(11)] with [RhCl(PPh(3))(3)] affords, after chromatography, three new 10-vertex rhodathiaboranes, [2,2,2-(H)(PPh(3))(2)-closo-2,1-RhSB(8)H(8)] (3), [6,6,9-(PPh(3))(3)-arachno-6,5-RhSB(8)H(9)] (4) and [2,2,2-(Cl)(H)(PPh(3))-6-(PPh(3))-closo-2,1-RhSB(8)H(7)] (5). 3 reacts quantitatively with PPh(3) to form 4, which, in turn, reacts with chlorinated solvents to give the chloro-ligated cluster 5. Kinetic studies demonstrate that the reaction of 3 with PPh(3) obeys a second-order rate law, with an associative mechanism. The Lewis acidity of 3 is quite remarkable, and, given its closo-to-arachno structural and electronic response, this cluster is expected to exhibit a rich chemistry.     

Ten-vertex polyhedral azametallaborane chemistry: a unique nido-6,9 to nido-6,8-cluster isomerization

Reaction of the [arachno-4-NB(8)H(12)](-) anion with [RhCl(2)(eta(5)-C(5)Me(5))](2) in CH(2)Cl(2) at room temperature affords a mixture of red '6,9' isomer [9-(eta(5)-C(5)Me(5))-nido-6,9-NRhB(8)H(11)] () and its yellow '6,8' isomer, [8-(eta(5)-C(5)Me(5))-nido-6,8-NRhB(8)H(11)] (). Under the same conditions, reactions of with [IrCl(2)(eta(5)-C(5)Me(5))](2) and [RuCl(2)(eta(6)-MeC(6)H(4)-4-(iso)Pr)](2) give the '6,8' isomers, yellow [8-(eta(5)-C(5)Me(5))-nido-6,8-NIrB(8)H(11)] () and red [8-(eta(6)-MeC(6)H(4)-4-(iso)Pr)-nido-6,8-NRuB(8)H(11)] (), respectively. In contrast, [IrCl(PPh(3))(3)] yields orange [9,9-(PPh(3))(2)-9-H-nido-6,9-NIrB(8)H(11)] (), which exhibits the '6,9' configuration. Compound isomerizes quantitatively in solution to give . At high temperatures, compound gives the yellow '6,8' species, [8,8-(PPh(3))(2)-8-H-nido-6,8-NIrB(8)H(11)] (), in low yields. Possible mechanisms for the unprecedented 6,9 --> 6,8 isomerization are discussed.     

Synthesis, structure and DFT study of dinuclear iron, cobalt and nickel complexes with cyclopentadienyl-metal moieties

Reactions of 1,1'-bis(dipheny1phosphino)cobaltocene with Co(PMe(3))(4), Ni(PMe(3))(4), Fe(PMe(3))(4), Ni(COD)(2), FeMe(2)(PMe(3))(4) or NiMe(2)(PMe(3))(3) afford a series of novel dinuclear complexes [((Me(3)P)[lower bond 1 start]Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)M[upper bond 1 end](η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (M = Co(1), Ni(2) and Fe(3)) [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](COD)](4), [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](PMe(3))(2)] (5) and [((Me(3)P)[lower bond 1 start]Co(Me)(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)Fe[upper bond 1 end](Me)(η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (6). Reactions of 1,1'-bis(dipheny1phosphino)ferrocene with Ni(PMe(3))(4), NiMe(2)(PMe(3))(3), or Co(PMe(3))(4) gives rise to complexes [Fe(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)M[upper bond 1 end](PMe(3))(2)] (M = Ni (7), Co (8)). The complexes 1-8 were spectroscopically investigated and studied by X-ray single crystal diffraction. The possible reaction mechanisms and structural characteristics are discussed. Density functional theory (DFT) calculations strongly support the deductions.     

Octahedral Ru(II) amido complexes TpRu(L)(L')(NHR) (Tp = hydridotris(pyrazolyl)borate; L = L' = P(OMe)3 or PMe3 or L = CO and L' = PPh3; R = H,Ph, or tBu): synthesis,characterization, and reactions with weakly acidic C-H bonds

The octahedral Ru(II) amine complexes [TpRu(L)(L')(NH(2)R)][OTf] (L = L' = PMe(3), P(OMe)(3) or L = CO and L' = PPh(3); R = H or (t)Bu) have been synthesized and characterized. Deprotonation of the amine complexes [TpRu(L)(L')(NH(3))][OTf] or [TpRu(PMe(3))(2)(NH(2)(t)Bu)][OTf] yields the Ru(II) amido complexes TpRu(L)(L')(NH(2)) and TpRu(PMe(3))(2)(NH(t)Bu). Reactions of the parent amido complexes or TpRu(PMe(3))(2)(NH(t)Bu) with phenylacetylene at room temperature result in immediate deprotonation to form ruthenium-amine/phenylacetylide ion pairs, and heating a benzene solution of the [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] ion pair results in the formation of the Ru(II) phenylacetylide complex TpRu(PMe(3))(2)(C[triple bond]CPh) in >90% yield. The observation that [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] converts to the Ru(II) acetylide with good yield while heating the ion pairs [TpRu(L)(L')(NH(3))][PhC(2)] yields multiple products is attributed to reluctant dissociation of ammonia compared with the (t)butylamine ligand (i.e., different rates for acetylide/amine exchange). These results are consistent with ligand exchange reactions of Ru(II) amine complexes [TpRu(PMe(3))(2)(NH(2)R)][OTf] (R = H or (t)Bu) with acetonitrile. The previously reported phenyl amido complexes TpRuL(2)(NHPh) [L = PMe(3) or P(OMe)(3)] react with 10 equiv of phenylacetylene at elevated temperature to produce Ru(II) acetylide complexes TpRuL(2)(C[triple bond]CPh) in quantitative yields. Kinetic studies indicate that the reaction of TpRu(PMe(3))(2)(NHPh) with phenylacetylene occurs via a pathway that involves TpRu(PMe(3))(2)(OTf) or [TpRu(PMe(3))(2)(NH(2)Ph)][OTf] as catalyst. Reactions of 1,4-cyclohexadiene with the Ru(II) amido complexes TpRu(L)(L')(NH(2)) (L = L' = PMe(3) or L = CO and L' = PPh(3)) or TpRu(PMe(3))(2)(NH(t)Bu) at elevated temperatures result in the formation of benzene and Ru hydride complexes. TpRu(PMe(3))(2)(H), [Tp(PMe(3))(2)Ru[double bond]C[double bond]C(H)Ph][OTf], [Tp(PMe(3))(2)Ru=C(CH(2)Ph)[N(H)Ph]][OTf], and [TpRu(PMe(3))(3)][OTf] have been independently prepared and characterized. Results from solid-state X-ray diffraction studies of the complexes [TpRu(CO)(PPh(3))(NH(3))][OTf], [TpRu(PMe(3))(2)(NH(3))][OTf], and TpRu(CO)(PPh(3))(C[triple bond]CPh) are reported.     

Platinum complexes of naphthalene-1,8-dichalcogen and related polyaromatic hydrocarbon ligands

Platinum bisphosphine complexes bearing dichalcogen-derivatised naphthalene, acenaphthene or phenanthrene ligands have been prepared by either oxidative addition to zero-valent platinum species or from [PtCl(2)(PPhR(2))] (R=Ph or Me) and the disodium or dilithium salts of the parent disulfur, diselenide or mixed S/Se species. The parent naphthalene, acenaphthene and phenanthrene chalcogen compounds were treated with either [Pt(PPh(3))(4)] or [Pt(C(2)H(4))(PMe(3))(2)] (prepared in situ from [PtCl(2)(PMe(3))(2)], ethene and sodium naphthalide or super hydride [LiBEt(3)H]) to give the appropriate platinum(II) species. The dilithium salts of 1,8-E(2)-naphthalene (E=S or Se) prepared in situ by reduction of the E-E bond with [LiBEt(3)H] were treated with [PtCl(2)(PPh(3))(2)] to give [Pt(1,8-E(2)-nap)(PPh(3))(2)]. The tetraoxides [Pt(1,8-(S(O)(2))(2)-nap)(PR(3))(2)] (PR(3)=PPh(3) or PMe(2)Ph) were prepared in a similar metathetical manner from the appropriate [PtCl(2)(PR(3))] complexes and the disodium salt of naphthalene 1,8-disulfinic acid (1,8-(S(O)ONa)(2)-nap). The X-ray structures of selected examples reveal bidentate coordination with the naphthalene-E(2) unit hinged (111-137 degrees) with respect to the coordination plane. The naphthalene ring suffers significant distortion from planarity.     

Catalytic hydrogenation by triruthenium clusters: a mechanistic study with parahydrogen-induced polarization

The reactivity of the cluster family [Ru(3)(CO)(12-x)(L)(x)] (in which L=PMe(3), PMe(2)Ph, PPh(3) and PCy(3), x=1-3) towards hydrogen is described. When x=2, three isomers of [Ru(3)(H)(mu-H)(CO)(9)(L)(2)] are formed, which differ in the arrangement of their equatorial phosphines. Kinetic studies reveal the presence of intra- and inter-isomer exchange processes with activation parameters and solvent effects indicating the involvement of ruthenium-ruthenium bond heterolysis and CO loss, respectively. When x=3, reaction with H(2) proceeds to form identical products to those found with x=2, while when x=1 a single isomer of [Ru(3)(H)(mu-H)(CO)(10)(L)] is formed. Species [Ru(3)(H)(mu-H)(CO)(9)(L)(2)] have been shown to play a kinetically significant role in the hydrogenation of an alkyne substrate through initial CO loss, with rates of H(2) transfer being explicitly determined for each isomer. A less significant secondary reaction involving loss of L yields a detectable product that contains both a pendant vinyl unit and a bridging hydride ligand. Competing pathways that involve fragmentation to form [Ru(H)(2)(CO)(2)(L)(alkyne)] are also observed and shown to be favoured by nonpolar solvents. Kinetic data reveal that catalysis based on [Ru(3)(CO)(10)(PPh(3))(2)] is the most efficient although [Ru(3)(H)(mu-H)(CO)(9)(PMe(3))(2)] corresponds to the most active of the detected intermediates.     

In situ NMR observation of mono- and binuclear rhodium dihydride complexes using parahydrogen-induced polarization

Starting from the binuclear complex [RhCl(NBD)]2 (NBD = 2,5-norbornadiene) in the presence of the phosphines L = PMe3, PMe2Ph, PMePh2, PEt3, PEt2Ph, PEtPh2, or P(n-butyl)3, various mononuclear dihydrides of the type Rh(H)2CIL3, i.e., those of the homogeneous hydrogenation catalysts RhCIL3, have been obtained upon addition of parahydrogen, and their 1H NMR spectra have been investigated using parahydrogen-induced polarization (PHIP). Furthermore, the two binuclear complexes (H)(Cl)Rh(PMe3)2(mu-Cl)(mu-H)Rh(PMe3) and (H)(Cl)Rh(PMe2Ph)2(mu-Cl)(mu-H)Rh(PMe2Ph) have been detected and characterized by means of this in situ NMR method. Analogous complexes with trifluoroacetate instead of chloride, i.e., Rh(H)2(CF3COO)L3, have been generated in situ starting from Rh(NBD)(acac) in the presence of trifluoroacetic acid in combination with the phosphines L = PPh3, PEt2Ph, PEt3, and P(n-butyl)3, and their 1H NMR parameters have been determined.     

A mechanistic investigation of oxidative addition of methyl iodide to [Tp*Rh(CO)(L)

Reaction of methyl iodide with square planar [kappa(2)-Tp*Rh(CO)(PMe(3))] 1a (Tp* = HB(3,5-Me(2)pz)(3)) at room temperature affords [kappa(3)-Tp*Rh(CO)(PMe(3))(Me)]I 2a, which was fully characterized by spectroscopy and X-ray crystallography. The pseudooctahedral geometry of cationic 2a, which contains a kappa(3)-coordinated Tp* ligand, indicates a reaction mechanism in which nucleophilic attack by Rh on MeI is accompanied by coordination of the pendant pyrazolyl group. In solution 2a transforms slowly into a neutral (acetyl)(iodo) rhodium complex [kappa(3)-Tp*Rh(PMe(3))(COMe)I] 3a, for which an X-ray crystal structure is also reported. Kinetic studies on the reactions of [kappa(2)-Tp*Rh(CO)(L)] (L = PMe(3), PMe(2)Ph, PMePh(2), PPh(3), CO)] with MeI show second-order behavior with large negative activation entropies, consistent with an S(N)2 mechanism. The second-order rate constants correlate well with phosphine basicity. For L = CO, reaction with MeI gives an acetyl complex, [kappa(3)-Tp*Rh(CO)(COMe)I]. The bis(pyrazolyl)borate complexes [kappa(2)-Bp*Rh(CO)(L)] (L = PPh(3), CO) are much less reactive toward MeI than the Tp* analogues, indicating the importance of the third pyrazolyl group and the accessibility of a kappa(3) coordination mode. The results strengthen the evidence in favor of an S(N)2 mechanism for oxidative addition of MeI to square planar d(8) transition metal complexes.     

The [2,5,12-C3B8H15]- anion, the first representative of the eleven-vertex hypho family of tricarbaboranes

In one synthetic step from the readily available 9-Me(2)SCH(2)-nido-7,8-C(2)B(9)H(11) (compound 1), the first representative of the eleven-vertex hypho family of tricarbaboranes, [2,5,12-C(3)B(8)H(15)][X] (X=[NMe4]+ or [PPh4]+) (compound 2), has been isolated in 32% yield and structurally characterised by single-crystal X-ray diffraction, multi-nuclear NMR spectroscopy, mass spectrometry, and computational methods. Both [NMe4]+ or [PPh4]+ salts of anion 2 were found to undergo degradative conversion to the [hypho-6,7-C(2)B(6)H(13)]- anion (anion 3) in alkaline medium. The [PPh4]+ salt of anion 2 converted quantitatively to the [6-CH3-arachno-5,10-C(2)B(8)H(12)]- anion (anion 4) if passed through a silica column or to the neutral 5-CH3-arachno-6,9-C(2)B(8)H(13) (compound 5) on treatment of its [NMe4]+ salt with dilute HCl. Moreover, the reaction of compound 2 with [RhCl2(C(5)Me(5))]2 afforded the eleven-vertex ruthenadicarbaborane [1-C(5)Me(5)-4-CH(3)-closo-1,2,3-RhC(2)B(8)H(9)] (compound 8). All these reactions resulted in an extrusion of one of the cluster carbon atoms into an exoskeletal position.     

Structural basis for unusually long wavelength charge transfer transitions in complexes [MCl(ECH(2)CH(2)NMe(2))(PR(3))] (E = Te,Se; M = Pt,Pd): experimental results and TD-DFT calculations

A series of new complexes, the blue compounds [PdCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PEt(3), PPr(n)(3), PBu(n)(3), PMe(2)Ph, PMePh(2), PPh(3), PTol(3)) and the red [PtCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PMe(2)Ph, PMePh(2)), were synthesized and studied spectroscopically ((1)H and (31)P NMR, UV/vis) and by cyclic voltammetry. The structures of [PdCl(TeCH(2)CH(2)NMe(2))(PPr(n)(3))] (2b) [PdCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2e), [PtCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2i), and the related [PtCl(SeCH(2)CH(2)NMe(2))(PEt(3))] (3) were determined crystallographically, revealing a typical pattern of trans-positioned neutral N and P donor atoms in an approximately square planar setting. The molecules 2b, 2e, and 2i were calculated by TD-DFT methodology to understand the origin of the weak (epsilon approximately 200 M(-1) cm(-1)) long-wavelength bands at about 600 nm for Pd/Te complexes such as 2b or 2e, at ca. 460 nm for Pt/Te systems such as 2i, and at about 405 nm for Pt/Se analogues such as 3. These transitions are identified as charge transfer transitions from the selenolato or tellurolato centers to unoccupied orbitals involving mainly the phosphine coligands for the Pt(II) compounds and more delocalized MOs for the Pd(II) analogues. Calculations and electrochemical data were used to rationalize the effects of metal and chalcogen variation.     

The versatile reactivity of cyclo-(P5tBu4)- with complexes of the nickel triad

Na[cyclo-(P(5)tBu(4))] (1) reacts with [NiCl(2)(PEt(3))(2)] and [PdCl(2)(PMe(2)Ph)(2)] with elimination of tBuCl and formation of the corresponding metal(0) cyclopentaphosphene complexes [Ni{cyclo-(P(5)tBu(3))}(PEt(3))(2)] (2) and [Pd{cyclo-(P(5)tBu(3))}(PMe(2)Ph)(2)] (3). In contrast, complexes with the more labile triphenylphosphane ligand, such as [MCl(2)(PPh(3))(2)] (M=Ni, Pd), react with 1 with formation of [NiCl{cyclo-(P(5)tBu(4))}(PPh(3))] (4) and [Pd{cyclo-(P(5)tBu(4))}(2)] (5), respectively, in which the cyclo-(P(5)tBu(4)) ligand is intact. In the case of palladium, the cyclopentaphosphene complex [Pd{cyclo-(P(5)tBu(3))}(PPh(3))(2)] (6) in trace amounts is also formed. However, [Ni{cyclo-(P(5)tBu(4))}(2)] (7) is easily obtained by reaction of two equivalents of 1 and one equivalent of [NiCl(2)(bipy)] at room temperature. Complex 7 rearranges on heating in n-hexane or toluene to the previously unknown [Ni{cyclo-(P(5)tBu(4))PtBu}{cyclo-(P(4)tBu(3))}] (8), which presumably is formed via the intermediate [Ni{cyclo-(P(5)tBu(4))}{cyclo-(P(4)tBu(3))PtBu}], which, after an unexpected and unprecedented phosphanediide migration, gives 8, but always as an inseparable mixture with 7. In the reaction of 1 with [PtCl(2)(PPh(3))(2)], ring contraction and formation of [PtCl{cyclo-(P(4)tBu(3))PtBu}(PMe(2)Ph)] (9) is observed. Complexes 3-5 and 7-9 were characterised by (31)P NMR spectroscopy, and X-ray structures were obtained for 5-9.     

Redox-noninnocence of the S,S'-coordinated ligands in bis(benzene-1,2-dithiolato)iron complexes

The electronic structures of complexes of iron containing two S,S'-coordinated benzene-1,2-dithiolate, (L)(2)(-), or 3,5-di-tert-butyl-1,2-benzenedithiolate, (L(Bu))(2)(-), ligands have been elucidated in depth by electronic absorption, infrared, X-band EPR, and Mossbauer spectroscopies. It is conclusively shown that, in contrast to earlier reports, high-valent iron(IV) (d(4), S = 1) is not accessible in this chemistry. Instead, the S,S'-coordinated radical monoanions (L(*))(1)(-) and/or (L(Bu)(*))(1)(-) prevail. Thus, five-coordinate [Fe(L)(2)(PMe(3))] has an electronic structure which is best described as [Fe(III)(L)(L(*))(PMe(3))] where the observed triplet ground state of the molecule is attained via intramolecular, strong antiferromagnetic spin coupling between an intermediate spin ferric ion (S(Fe) = (3)/(2)) and a ligand radical (L(*))(1)(-) (S(rad) = (1)/(2)). The following complexes containing only benzene-1,2-dithiolate(2-) ligands have been synthesized, and their electronic structures have been studied in detail: [NH(C(2)H(5))(3)](2)[Fe(II)(L)(2)] (1), [N(n-Bu)(4)](2)[Fe(III)(2)(L)(4)] (2), [N(n-Bu)(4)](2)[Fe(III)(2)(L(Bu))(4)] (3); [P(CH(3))Ph(3)][Fe(III)(L)(2)(t-Bu-py)] (4) where t-Bu-py is 4-tert-butylpyridine. Complexes containing an Fe(III)(L(*))(L)- or Fe(III)(L(Bu))(L(Bu)(*))- moiety are [N(n-Bu)(4)][Fe(III)(2)(L(Bu))(3)(L(Bu)(*))] (3(ox)()), [Fe(III)(L)(L(*))(t-Bu-py)] (4(ox)()), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))] (7), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))(2)] (8), and [Fe(III)(L(Bu))(L(Bu)(*))(PPr(3))] (9), where Pr represents the n-propyl substituent. Complexes 2, 3(ox)(), 4, [Fe(III)(L)(L(*))(PMe(3))(2)] (6), and 9 have been structurally characterized by X-ray crystallography.     

Osazone anion radical complex of rhodium(III)

One electron paramagnetic parent osazone complex of rhodium of type trans-Rh(L(NHPh)H(2))(PPh(3))(2)Cl(2) (1), defined as an osazone anion radical complex of rhodium(III), trans-Rh(III)(L(NHPh)H(2)(?-))(PPh(3))(2)Cl(2), 1((t-RhL?)), with a minor contribution (～2%) of rhodium(II) electromer, trans-Rh(II)(L(NHPh)H(2))(PPh(3))(2)Cl(2), 1((t-Rh?L)), and their nonradical congener, trans-[Rh(III)(L(NHPh)H(2))(PPh(3))(2)Cl(2)]I(3) ([t-1](+)I(3)(-)), have been isolated and are substantiated by spectra, bond parameters, and DFT calculations on equivalent soft complexes [Rh(L(NHPh)H(2))(PMe(3))(2)Cl(2)] (3) and [Rh(L(NHPh)H(2))(PMe(3))(2)Cl(2)](+) (3(+)). 1 is not stable in solution and decomposes to [t-1](+) and a new rhodium(I) osazone complex, [Rh(I)(L(NHPh)H(2))(PPh(3))Cl] (2). 1 absorbs strongly at 351 nm due to MLCT and LLCT, while [t-1](+) and 2 absorb moderately in the range of 300-450 nm, respectively, due to LMCT and MLCT elucidated by TD-DFT calculations on 3((t-RhL?)), [t-3](+), and Rh(I)(L(NHPh)H(2))(PMe(3))Cl (4). EPR spectra of solids at 295 and 77 K, and dichloromethane-toluene frozen glass at 77 K of 1 are similar with g = 1.991, while g = 2.002 for the solid at 25 K. The EPR signal of 1 in dichloromethane solution is weaker (g = 1.992). In cyclic voltammetry, 1 displays two irreversible one electron transfer waves at +0.13 and -1.22 V, with respect to Fc(+)/Fc coupling, due to oxidation of 1((t-RhL?)) to [t-1](+) at the anode and reduction of rhodium(III) to rhodium(II), i.e., [t-1](+) to electromeric 1((t-Rh?L)) at the cathode.     

Oxidative cleavage of tetraaryltetraphosphane-1,4-diides by nickel(II) and palladium(II): formation of unusual Ni(0) and Pd(0) diaryldiphosphene complexes

[Na(2)(thf)(4)(P(4)Mes(4))] (1) (Mes = 2,4,6-Me(3)C(6)H(2)) reacts with one equivalent of [NiCl(2)(PEt(3))(2)], [NiCl(2)(PMe(2)Ph)(2)], [PdCl(2)(PBu(n)(3))(2)] or [PdCl(2)(PMe(2)Ph)(2)] to give the corresponding nickel(0) and palladium(0) dimesityldiphosphene complexes [Ni(eta(2)-P(2)Mes(2))(PEt(3))(2)] (2), [Ni(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (3), [Pd(eta(2)-P(2)Mes(2))(PBu(n)(3))(2)] (4) and [Pd(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (5), respectively, via a redox reaction. The molecular structures of the diphosphene complexes 2-5 are described.     

A tungsten-183NMR study of cis and trans isomers of [W(CO)4(PPh3)(PR3)](PR3 = phosphine, phosphite)

Tungsten-183 NMR data are reported for the complexes cis- and trans-[W(CO)4(PPh3)(PR3)] (PR3 = PnBu3, PMe3, PMe2Ph, PMePh2, PPh3, P(4-C6H4OMe)3, P(4-C6H4Me)3, P(4-C6H4F)3, P(OMe)3, P(OEt)3, P(OPh)3 and for PCy3, P(NMe2)3(trans isomer only). The 183W chemical shift (obtained by indirect detection using 31P) is found to be related to the PR3 ligand parameters nu and theta (Tolman electronic factor and cone angle, respectively) for the cis isomers and to nu (but only poorly to theta) for the trans isomers. The 183W-31P spin coupling constant is also related, less clearly for P-C than for P-N and P-O bonded ligands, to nu. Chemical shifts are referenced to an absolute frequency Xi (183W) = 4.15 MHz, which is proposed as a calibration standard for 183W NMR. The structures of cis-[W(CO)4(PPh3)(PMe3)] and cis-[W(CO)4(PPh3){P(4-C6H4F)3}] are reported.     

Gold(I) Complexes with the nido-Diphosphino Ligand [7,8-(Ph(2)P)(2)-7,8-C(2)B(9)H(10)](-). Preparation of the First Metallocarborane Complex of this Ligand. Crystal Structures of [Au{(PPh(2))(2)C(2)B(9)H(10)}(PPh(3))].CH(2)Cl(2) and [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2){(PPh(2))(2)(CH(2))(3)}].3Me(2)CO

The reaction of [AuCl(PR(3))] with [1,2-(Ph(2)P)(2)-1,2-C(2)B(10)H(10)] in refluxing ethanol proceeds with partial degradation (removal of a boron atom adjacent to carbon) of the closo species to give [Au{(PPh(2))(2)C(2)B(9)H(10)}(PR(3))] [PR(3) = PPh(3) (1), PPh(2)Me (2), PPh(2)(4-Me-C(6)H(4)) (3), P(4-Me-C(6)H(4))(3) (4), P(4-OMe-C(6)H(4))(3) (5)]. Similarly, the treatment of [Au(2)Cl(2)(&mgr;-P-P)] with [1,2-(Ph(2)P)(2)-1,2-C(2)B(10)H(10)] under the same conditions leads to the complexes [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2)(&mgr;-P-P)] [P-P = dppe = 1,2-bis(diphenylphosphino)ethane (6), dppp = 1,3-bis(diphenylphosphino)propane (7)], where the dppe or dppp ligands bridge two gold nido-diphosphine units. The reaction of 1 with NaH leads to removal of one proton, and further reaction with [Au(PPh(3))(tht)]ClO(4) gives the novel metallocarborane compound [Au(2){(PPh(2))(2)C(2)B(9)H(9)}(PPh(3))(2)] (8). The structure of complexes 1 and 7 have been established by X-ray diffraction. [Au{(PPh(2))(2)C(2)B(9)H(10)}(PPh(3))] (1) (dichloromethane solvate) crystallizes in the monoclinic space group P2(1)/c, with a = 17.326(3) ?, b = 20.688(3) ?, c = 13.442(2) ?, beta = 104.710(12) degrees, Z = 4, and T = -100 degrees C. [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2)(&mgr;-dppp)] (7) (acetone solvate) is triclinic, space group P&onemacr;, a = 13.432(3) ?, b = 18.888(3) ?, c = 20.021(3) ?, alpha = 78.56(2) degrees, beta = 72.02(2) degrees, gamma = 73.31(2) degrees, Z = 2, and T = -100 degrees C. In both complexes the gold atom exhibits trigonal planar geometry with the 7,8-bis(diphenylphosphino)-7,8-dicarba-nido-undecaborate(1-) acting as a chelating ligand.