Efficient photocatalytic hydrogen evolution without an electron mediator using a simple electron donor-acceptor dyad

A highly efficient photocatalytic hydrogen evolution system without an electron mediator such as methyl viologen (MV(2+)) has been constructed using 9-mesityl-10-methylacridinium ion (Acr(+)-Mes), poly(N-vinyl-2-pyrrolidone)-protected platinum nanoclusters (Pt-PVP) and NADH (beta-nicotinamide adenine dinucleotide, reduced form) as the photocatalyst, hydrogen evolution catalyst and electron donor, respectively. The photocatalyst (Acr(+)-Mes) undergoes photoinduced electron transfer (ET) from the Mes moiety to the singlet excited state of the Acr(+) moiety to produce an extremely long-lived ET state, which is capable of oxidizing NADH and reducing Pt-PVP, leading to efficient hydrogen evolution. The hydrogen evolution efficiency is 300 times higher than that in the presence of MV(2+) because of the much faster reduction rate of Pt-PVP by Acr(*)-Mes compared with that by MV(*+). When the electron donor (NADH) is replaced by ethanol in the presence of an alcohol dehydrogenase (ADH), NADH is regenerated during the photocatalytic hydrogen evolution.     

Photocatalytic hydrogen generation using glycerol wastewater over Pt/TiO2

Using glycerol as electron donor, photocatalytic hydrogen generation over Pt/TiO₂ was investigated. The results show that glycerol can not only improve the efficiency of photocatalytic hydrogen generation but can also be decomposed effectively. The factors which affect photocatalytic hydrogen generation, such as irradiation time, initial concentration of the glycerol solution, pH-value of the suspensions and the coexisting substances were studied. The final oxidation products of glycerol were H₂O and CO₂. Glyceraldhyde, glycoladehyde, glycolic acid and formaldehyde were identified as the intermediates. A possible reaction mechanism was discussed. __________ Translated from Journal of Molecular Catalysis, 2008, 22(2) (in Chinese)     

Photocatalytic generation of hydrogen from water using a platinum(II) terpyridyl acetylide chromophore

The cationic complex [Pt(tolylterpyridine)(phenylacetylide)]+ has been used as a photosensitizer for the reduction of aqueous protons in the presence of a sacrificial electron donor to make H2. In this system, triethanolamine (TEOA) acts as the sacrificial reducing agent, methyl viologen (MV2+) serves as an electron transfer agent, and colloidal Pt stabilized by polyacrylate functions as the catalyst for H2 generation. The Pt(II) chromophore undergoes both oxidative and reductive quenching, but H2 is only seen when both TEOA and MV2+ are present. Irradiation of the reaction solution for 10 h with lambda > 410 nm leads to 85 turnovers and an overall yield of 34% based on TEOA. While H2 evolution is maximized for the system at pH 7, it is also seen at pH 5 and 9, in contrast with earlier reports using Ru(bpy)32+ as the photosensitizer. This is the first time that a Pt diimine or terpyridyl complex has been used as the photosensitizer for H2 generation from aqueous protons.     

Photocatalytic function of a polymer-supported B12 complex with a ruthenium trisbipyridine photosensitizer

The hybrid polymer was synthesized by a radical polymerization of a B(12) derivative and a Ru complex having styrene moieties in each peripheral position, and the hybrid polymer showed photocatalytic activity for molecular transformation with visible light irradiation.     

Controlled generation of singlet oxygen by a water-soluble meso-pyrenylporphyrin photosensitizer through interaction with DNA

An electron donor-connecting water-soluble porphyrin, meso-(1-pyrenyl)-tris(N-methyl-p-pyridinio)porphyrin, did not demonstrate singlet oxygen generating activity under photo-irradiation. The interaction with DNA successfully recovered the photosensitized singlet oxygen generation by this porphyrin.     

Photocatalytic hydrogen generation from water with iron carbonyl phosphine complexes: improved water reduction catalysts and mechanistic insights

An extended study of a novel visible-light-driven water reduction system containing an iridium photosensitizer, an in situ iron(0) phosphine water reduction catalyst (WRC), and triethylamine as sacrificial reductant is described. The influences of solvent composition, ligand, ligand-to-metal ratio, and pH were studied. The use of monodentate phosphine ligands led to improved activity of the WRC. By applying a WRC generated in situ from Fe(3) (CO)(12) and tris[3,5-bis(trifluoromethyl)phenyl]phosphine (P[C(6)H(3)(CF(3))(2)](3), Fe(3)(CO)(12)/PR(3)=1:1.5), a catalyst turnover number of more than 1500 was obtained, which constitutes the highest activity reported for any Fe WRC. The maximum incident photon to hydrogen efficiency obtained was 13.4% (440 nm). It is demonstrated that the evolved H(2) flow (0.23 mmol H(2) h(-1) mg(-1) Fe(3)(CO)(12)) is sufficient to be used in polymer electrolyte membrane fuel cells, which generate electricity directly from water with visible light. Mechanistic studies by NMR spectroscopy, in situ IR spectroscopy, and DFT calculations allow for an improved understanding of the mechanism. With respect to the Fe WRC, the complex [HNEt(3)](+)[HFe(3)(CO)(11)](-) was identified as the key intermediate during the catalytic cycle, which led to light-driven hydrogen generation from water.     

Rapid determination of hydrogen peroxide in whitening patches for teeth using a new portable near-infrared spectrometer

A nondestructive determination method of hydrogen peroxide in whitening patches for teeth was developed by using a new portable near-infrared (NIR) spectrometer. Development of the portable NIR spectrometer was based on microchip technologies with photodiode arrays. By using the portable NIR spectrometer, the new determination method is very rapid; it requires less than 1 s. The conventional method for the determination of hydrogen peroxide, redox titration, requires about 2 h of analysis, including the sample extraction time from a sample matrix. The conventional method also uses hazardous and harmful solvents and, furthermore, its samples cannot be used after titration. To find the peak due to the O–H bond vibration of hydrogen peroxide under the existence of water which shows huge absorption O–H absorption around 1450 nm, the NIR spectra of a hydrogen peroxide aqueous solution were investigated. A clear variation of absorption based on the concentration of the hydrogen peroxide due to the O–H bond vibration was found in the standard deviation plot around 1400 nm. In this study, two kinds of whitening patch products, A and B, were used for samples. A partial least squares (PLS) regression was used for calibration and validation in the 1100 to 1720 nm spectral range. For validation results, the standard error of prediction (SEP) was 0.38% for Patch A and 0.37% for Patch B. This study shows the feasibility of using the portable NIR spectrometer with photodiode arrays for the rapid and safe determination of hydrogen peroxide in whitening patches.     

Photocatalytic hydrogen evolution based on efficient energy and electron transfers in donor-bridge-acceptor multibranched-porphyrin-functionalized platinum nanocomposites

Two donor-bridge-acceptor conjugates (5,10,15,20-tetrakis[4-(N,N-diphenylaminobenzoate)phenyl] porphyrin (TPPZ) and 5,10,15,20-tetrakis[4-(N,N-diphenylaminostyryl)phenyl] porphyrin (TPPX)) were covalently linked to triphenylamine (TPA) at the meso-position of porphyrin ring. The triphenylamine entities were expected to act as energy donors and the porphyrins to act as an energy acceptor. In this paper, we report on the synthesis of these multibranched-porphyrin-functionalized Pt nanocomposites. The conjugates used here not only served as a stabilizer to prevent agglomeration of Pt nanoparticles, but also as a light-harvesting photosensitizer. The occurrence of photoinduced electron-transfer processes was confirmed by time-resolved fluorescence and photoelectrochemical spectral measurements. The different efficiencies for energy and electron transfer in the two multibranched porphyrins and the functionalized Pt nanocomposites were attributed to diverse covalent linkages. Moreover, in the reduction of water to produce H(2), the photocatalytic activity of the Pt nanocomposite functionalized by TPPX, in which the triphenylamine and porphyrin moieties are bonded through an ethylene bridge, was much higher than that of the platinum nanocomposite functionalized by TPPZ, in which the two moieties are bonded through an ester. This investigation demonstrates the fundamental advantages of constructing donor-bridge-acceptor conjugates as highly efficient photosensitizers based on efficient energy and electron transfer.     

Photoinduced hydrogen evolution in supramolecular devices with a rhenium photosensitizer linked to FeFe-hydrogenase model complexes

Coordination of the pyridyl-attached diiron azadithiolate hexacarbonyl complexes (2 and 3) through the pyridyl nitrogen to the Re on 10-phenanthroline rhenium (5a) and 2,9-diphenyl-1,10-phenanthroline rhenium (5b) forms novel [Re-Fe] complexes 7a, 7b and 8 respectively. Under visible light illumination using triethylamine as a sacrificial electron donor and [Re-Fe] type complexes (7a, 7b or 8) as catalysts, remarkably increased efficiency was observed for photoinduced hydrogen production with a turnover number reaching 11.8 from complex 7a and 8.75 from 7b. To the best of our knowledge, these are the best values compared to other [Re-Fe] photocatalysts reported so far. In contrast to the parent molecules, the turnover number by the intermolecular combination of complexes 6a and 2 showed a value of 5.23, and that from 6b and 2 is 3.8, while no H(2) was detected from 8a and 3 under the same experimental conditions. Obviously, the intramolecular combination of rhenium(I) and [2Fe2S] as a catalyst is promising for efficient H(2) evolution, and it is better than the intermolecular multi-component system.     

Photophysics of a cationic biological photosensitizer in anionic micellar environments: combined effect of polarity and rigidity

A steady-state and time-resolved photophysical study of a cationic phenazinium dye, phenosafranin (PSF), has been investigated in well-characterized biomimetic micellar nanocavities formed by anionic surfactants of varying chain lengths, namely, sodium decyl sulfate (S(10)S), sodium dodecyl sulfate (S(12)S), and sodium tetradecyl sulfate (S(14)S). In all these micellar environments, the charge transfer fluorescence of PSF shows a large hypsochromic shift along with an enhancement in the fluorescence quantum yield as compared to that in aqueous medium. A reduction in the nonradiative deactivation rate within the hydrophobic interior of micelles led to an increase in the fluorescence yield and lifetime. The present work shows the degree of accessibility of the fluorophore toward the ionic quencher in the presence of surfactants of different surfactant chain lengths. The fluorometric and fluorescence quenching studies suggest that the fluorophore resides at the micelle-water interfacial region. The enhancements in the fluorescence anisotropy and rotational relaxation time of the probe in all the micellar environments from the pure aqueous solution suggest that the fluorophore binds in motionally restricted regions introduced by the micelles. Polarity and viscosity of the microenvironments around the probe in the micellar systems have been determined. The work has paid proper attention to the hydrophobic effect of the surfactant chain length on photophysical observations.     

Photocatalytic production of hydrogen from aqueous solutions in the presence of electron donors and catalysts

Hydrogen is produced catalytically by visible light irradiation of neutral aqueous solutions, containing acridine yellow dye as a sensitizer, methyl viologen, an electron donor (EDTA) and several new catalysts. The process of hydrogen liberation and the properties of the catalysts used have been studied.

---

, - , , () , . .

     

Noncovalent assembly of a metalloporphyrin and an iron hydrogenase active-site model: photo-induced electron transfer and hydrogen generation

A noncovalent assembly of a pyridyl-functionalized hydrogenase active-site model complex and zinc tetraphenylporphyrin has been obtained and characterized. Upon light irradiation, fluorescence quenching by electron transfer was observed from the singlet excited state of the porphyrin to the diiron center, and the mechanism was verified by fluorescence lifetime and transient absorption spectroscopic measurements. In contrast to molecular dyads linked by covalent bonds, the assembled system was designed to avoid charge recombination via complex dissociation after photo-induced electron transfer. Visible light-driven hydrogen generation was observed from this self-assembled system. The assembling strategy employed in this study has the potential to be used for any other hydrogenase models in the future.     

Targeting and photodynamic killing of a microbial pathogen using protein cage architectures functionalized with a photosensitizer

The selectivity of antimicrobial photodynamic therapy (PDT) can be enhanced by coupling the photosensitizer (PS) to a targeting ligand. Nanoplatforms provide a medium for designing delivery vehicles that incorporate both functional attributes. We report here the photodynamic inactivation of a pathogenic bacterium, Staphylococcus aureus, using targeted nanoplatforms conjugated to a photosensitizer (PS). Both electrostatic and complementary biological interactions were used to mediate targeting. Genetic constructs of a protein cage architecture allowed site-specific chemical functionalization with the PS and facilitated dual functionalization with the PS and the targeting ligand. These results demonstrate that protein cage architectures can serve as versatile templates for engineering nanoplatforms for targeted antimicrobial PDT.     

高效传质与电子转移的全纳米线光催化燃料电池自驱动净水同步产氢

分别以三维分级碳布基底上组装的TiO₂纳米线阵列和铂化的硅纳米线阵列作为光阳极和光阴极,构建了具有高效传质和电子转移特征的全纳米线光催化燃料电池。在光照作用下,光阳极微流道内的光生空穴能有效氧化降解有害污染物,这同时增强了光电子还原水产氢的活性。与传统的平面式光电极相比,全纳米线光催化燃料电池在不需要外部偏压条件下即可高效降解模拟印染废水和同步生成氢气新能源。     

Octacyanotetramethylene-substituted dicyclopentanaphthalene: a new anionic electron acceptor with multi-stage reversible redox behavior

The dianion of 2,2′,2′′,2′′′-dicyclopenta[b,g]naphthalene-1,3,6,8-tetraylidenetetramalononitrile 4 exhibits relatively strong electron-accepting properties and undergoes reversible electrochemical reductions to the tetra- and hexaanionic species.     

高效传质与电子转移的全纳米线光催化燃料电池自驱动净水同步产氢

分别以三维分级碳布基底上组装的TiO₂纳米线阵列和铂化的硅纳米线阵列作为光阳极和光阴极,构建了具有高效传质和电子转移特征的全纳米线光催化燃料电池。在光照作用下,光阳极微流道内的光生空穴能有效氧化降解有害污染物,这同时增强了光电子还原水产氢的活性。与传统的平面式光电极相比,全纳米线光催化燃料电池在不需要外部偏压条件下即可高效降解模拟印染废水和同步生成氢气新能源。     

Highly efficient photoelectrochemical hydrogen generation using a ZnO nanowire array and a CdSe/CdS co-sensitizer

Highly efficient photoelectrochemical (PEC) hydrogen generation was achieved by fabricating CdSe deposited ZnO/CdS core/shell nanowire (NW) array photoanodes by a facile three-step solution-based method. Well-defined electrical pathways in 1-dimensional (1D) NW structures allowed efficient charge carrier collection, and CdSe/CdS co-sensitization enabled utilization of the visible region in the solar spectrum. PEC devices using CdSe/CdS/ZnO NW arrays showed improved absorption spectra, and they demonstrated a remarkable enhancement in PEC performance. Our proposed structure is a promising candidate photoanode for solar energy-to-hydrogen conversion devices.     

Photocatalytic oxygenation of pivalic acid with molecular oxygen via photoinduced electron transfer using 10-methylacridinium ions

Photoirradiation of the absorption band of the 10-methylacridinium ion (AcrH+) with visible light in deaerated CH3CN/H2O (1:1 v/v) containing pivalic acid (Bu(t)COOH) and less than 1 equiv of NaOH results in the selective formation of 9-tert-butyl-9,10-dihydro-10-methylacridine (AcrHBu(t)). The same product is obtained in O2-saturated CH3CN/H2O under visible light irradiation. Photoirradiation of the absorption band of AcrHBu(t) with UV light in deaerated CH3CN/H2O (1:1 v/v) results in the formation of tert-butyl hydroperoxide (Bu(t)OOH), accompanied by regeneration of AcrH+. This cycle can be repeated several times. When AcrH+ is replaced by the 9-phenyl derivative (AcrPh+), AcrPh+ acts as an effective photocatalyst for the one-pot photooxygenation of Bu(t)COOH in the presence of less than 1 equiv of NaOH relative to Bu(t)COOH with O2 to yield Bu(t)OOH and Bu(t)H. The photocatalytic oxygenation mechanism is discussed based on the detection of radical intermediates by laser flash photolysis and ESR measurements as well as quantum yield determination.     

Thermodynamic and electro-kinetic analyses of direct electron transfer (DET) and mediator-involved electron transfer (MET) with the help of a redox electron mediator

In this report, we conceptually distinguish direct electron transfer (DET) from mediator-involved (mediated) electron transfer (MET) in a glucose/oxygen-based fuel cell (FC) using an electrode potential/Fermi energy diagram. The anodic and cathodic overvoltages deviating from the equilibrium potential (the Fermi energy of redox electrons) were taken into account for the organic/inorganic redox couple and the mental experiments were performed during the trip of redox electrons through the interface between the anodic/cathodic organic/inorganic active mass and electrodes to propose electron transfer pathway. The proposed schema (inequality (MET) and equality in Fermi energy (DET)) should be experimentally corroborated by measurement of the electromotive force (emf). The MET is of technological significance in the presence of an electron mediator of the redox couple, despite a slightly narrower emf estimated between two electrodes by roughly 1 to 2 mV at most than the DET, in view of the thermodynamic and electro-kinetic viewpoints.