Catalyst- and solvent-free click synthesis of cyclodextrin-based polyrotaxanes exploiting a nitrile N-oxide

A catalyst- and solvent-free synthesis of cyclodextrin-based polyrotaxanes exploiting a stable nitrile N-oxide as an end-capping agent was achieved. The C-C bond-forming end-capping reaction of an allyl-terminated pseudopolyrotaxane with the nitrile N-oxide proceeded smoothly by solid-state grinding in a mortar to afford a polyrotaxane.     

Glutathione as the end capper for cyclodextrin/PEG polyrotaxanes

A facile one-pot synthesis of α-cyclodextrin-based polyrotaxane(PR) in aqueous solution is reported, where the peptide glutathione was used as the end-capping agent and the thiol-ene Michael addition was used as the end-capping reaction. Both polyrotaxanes with low threading ratio and high threading ratio were successfully obtained. In contrast to the conventionally used multiple-step synthesis methods and hydrophobic end cappers, this one-pot aqueous synthesis as well as the biocompatibility of the end-capping agent could result in a much more biocompatible PR to be used as biomaterials.     

Ligand accessibility to receptor binding sites enhanced by movable polyrotaxanes

Functionalized polyrotaxanes are utilized to investigate the relation to multivalent interactions between the mannose moiety and Con A immobilized surfaces. According to the results of SPR spectroscopy, the mannose-conjugated polyrotaxanes show a higher response than any other mannose conjugate on both surfaces of high- and low-density Con A. Moreover, the results of the FRET analysis suggest that the mobility of α-cyclodextrins in the polyrotaxane more efficiently contributes to their binding interactions in a multivalent manner. This well-defined polyrotaxane system provides control over ligand density, ligand mobility, and gives an efficient response to the biological interaction receptor, which has not been easy to achieve in covalently bound polymeric systems.     

Supramolecular design for multivalent interaction: maltose mobility along polyrotaxane enhanced binding with concanavalin A

High molecular mobility of maltose-conjugated alpha-cyclodextrins (alpha-CDs) along a poly(ethylene glycol) (PEG) chain due to the mechanically locked structure of polyrotaxanes enhanced multivalent interactions between maltose and concanavalin A (Con A). When maltose groups are conjugated with alpha-CDs that were threaded onto a PEG capped with benzyloxycarbonyl l-tyrosine (polyrotaxane), Con A-induced hemagglutination was greatly inhibited by polyrotaxanes with a certain threading % of alpha-CDs. Such an inhibitory effect was significantly superior to the other type of conjugates, in which poly(acrylic acid) was used as a backbone for maltose conjugation. The spin-spin relaxation time (T2) of the maltose C(1) proton in the polyrotaxane at a typical alpha-CD threading % was significantly larger than that of any other conjugate, which was well related to the inhibitory effect. Therefore, we concluded that the high mobility of maltose groups along the polyrotaxane structure contributes to enhanced Con A recognition.     

Interactions between block copolymers and single-walled carbon nanotubes in aqueous solutions: a small-angle neutron scattering study

The amphiphilic copolymers of the Pluronic family are known to be excellent dispersants for single-walled carbon nanotubes (SWCNT) in water, especially F108 and F127, which have rather long end-blocks of poly(ethylene oxide) (PEO). In this study, the structure of the CNT/polymer hybrid formed in water is evaluated by measurements of small-angle neutron scattering (SANS) with contrast variation, as supported by cryo-transmission electron microscopy (cryo-TEM) imaging. The homogeneous, stable, inklike dispersions exhibited very small isolated bundles of carbon nanotubes in cryo-TEM images. SANS experiments were conducted at different D(2)O/H(2)O content of the dispersing solvent. The data for both systems showed surprisingly minimal intensity values at 70% D(2)O solvent composition, which is much higher than the expected value of 17% D(2)O that is based on the scattering length density (SLD) of PEO. At this near match point, the data exhibited a q(-1) power law relation of intensity to the scattering vector (q), indicating rodlike entities. Two models are evaluated, as extensions to Pederson's block copolymer micelles models. One is loosely adsorbed polymer chains on a rodlike CNT bundle. In the other, the hydrophobic block is considered to form a continuous hydrated shell on the CNT surface, whereas the hydrophilic blocks emanate into the solvent. Both models were found to fit the experimental data reasonably well. The model fit required special considerations of the tight association of water molecules around PEO chains and slight isotopic selectivity.     

Sphere-to-rod transition of non-surface-active amphiphilic diblock copolymer micelles: a small-angle neutron scattering study

Micellization behavior of amphiphilic diblock copolymers with strong acid groups, poly(hydrogenated isoprene)-block-poly(styrenesulfonate), was investigated by small-angle neutron scattering (SANS). We have reported previously (Kaewsaiha, P.; Matsumoto, K.; Matsuoka, H. Langmuir 2005, 21, 9938) that this strongly ionic amphiphilic diblock copolymer shows almost no surface activity but forms micelles in water. In this study, the size, shape, and internal structures of the micelles formed by these unique copolymers in aqueous solution were duly investigated. The SANS data were well described by the theoretical form factor of a core-shell model and the Pedersen core-corona model. The micellar shape strongly depends on the hydrophobic chain length of the block copolymer. The polymer with the shortest hydrophobic chain was suggested to form spherical micelles, whereas the scattering curves of the longer hydrophobic chain polymers showed a q-1 dependence, reflecting the formation of rodlike micelles. Furthermore, the addition of salt at high concentration also induced the sphere-to-rod transition in micellar shape as a result of the shielding effect of electrostatic repulsion. The corona thickness was almost constant up to the critical salt concentration (around 0.2 M) and then decreased with further increases in salt concentration, which is in qualitatively agreement with existing theories. The spherical/rodlike micelle ratio was also constant up to the critical salt concentration and then decreased. The micelle size and shape of this unique polymer could be described by the common concept of the packing parameter, but the anomalously stable nature of the micelle (up to 1 M NaCl) is a special characteristic.     

Cyclodextrin-based polyrotaxanes

In the paper cyclodextrin-based (CD) polyrotaxanes are presented in the aspect of their syntheses and properties allowing various applications. The text consists of four parts, which describe CD-based polyrotaxanes with threads containing poly(ethylene oxide), poly (4,4′-diphenylenevinylene), polyfluorene and other chains. Conclusion shows new trends connected with this theme.     

Microemulsion droplets decorated by Brij700 block copolymer: phase behavior and structural investigation by SAXS and SANS

The phase behavior and structure of a four-component microemulsion system forming droplets with an oil core surrounded by the non-ionic C12E5 surfactant in water and "decorated" by long PEO chains using the block copolymer/surfactant Brij 700 has been studied. The surfactant-to-oil volume ratio, the coverage density of the droplets with decorating molecules, and the temperature were varied. For a surfactant-to-oil volume ratio of 2, the solutions form isotropic and clear solutions at room temperature, and the addition of Brij molecules stabilize the micelles: the transition to an opaque phase is shifted to higher temperatures as the surface coverage increases. At a surfactant-to-oil ratio of 1, the isotropic microemulsion phase is confined to a very narrow range of temperature, which location is shifted to increasing temperature, as the amount of Brij at the surface of the droplet is increased. For large surface coverages, the lower emulsification boundary varies roughly linearly with the surface coverage. The structure of the droplet phase was investigated by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). For a surfactant-to-oil ratio of 2, the SANS data revealed a transition from rodlike to spherical particles when Brij molecules are added to the system, which induces a larger curvature of the surfactant film. For a surfactant-to-oil ratio of 1, the droplets are nearly spherical at all surface coverages. The intermicellar interactions effects become increasingly more pronounced as Brij is added, due to the introduction of the highly swollen corona. A quantitative analysis of some of the SAXS data was done using an advanced model based on Monte Carlo simulations. It demonstrates the strong chain-chain interactions within the corona and confirms the increased interparticle interactions, as the coverage density is increased.     

New solvent for polyrotaxane. II. Dissolution behavior of polyrotaxane in ionic liquids and preparation of ionic liquid‐containing slide‐ring gels

The dissolution behavior of polyrotaxanes, consisting of α‐cyclodextrin and poly(ethylene glycol), with different molecular weights (2000 and 35,000) was investigated. Halogen‐containing ionic liquids, such as chlorides or bromides, were found to be good solvents for polyrotaxanes, regardless of their cations. Dissolution required a high temperature (above 90 °C), while intensive heating over 105 °C seemed to cause decomposition of the polyrotaxane. The discovery of new solvents for polyrotaxane was applied in the preparation of ionic liquid‐containing slide‐ring gels (SR gels), that is supramolecular networks of polyrotaxane swollen with ionic liquids, using a devised “non‐drying” technique accompanied by solvent exchange. Significant swelling of the SR gels with the ionic liquids was confirmed by dynamic mechanical measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1985–1994, 2006     

Synthesis of Novel Core Cross‐Linked Star‐Based Polyrotaxane End‐Capped via “CuAAC” Click Chemistry

The first example of core cross‐linked star (CCS) polyrotaxane was prepared using the poly(ϵ‐caprolactone) (PCL) CCS three‐dimensional (3D) scaffold. The 3D CCS polymer was firstly prepared through the “arm‐first” approach. Then, the “arms” of the resultant PCL CCS polymer were threaded with α‐cyclodextrins (α‐CDs). The threaded α‐CDs were permanently locked by the “click” reaction of terminal alkyne functionalities of the star polymers with the azide‐functionalized end caps to afford the CCS polyrotaxanes. All analytical results confirm the formation of the CCS polyrotaxanes and reveal their characteristics, including fluorescence under UV, a channel‐type crystalline structure, a two‐step thermal decomposition, and a unique core‐shell structure in great contrast to the polymer precursors.     

Polyrotaxane approach for synthesis of continuous beds for capillary electrochromatography

The polyrotaxane formation approach was evaluated for synthesis of continuous beds for capillary electrochromatography. This approach has the advantage of generating diverse electroosmotic and chromatographic properties without chemical reactions. The polyrotaxane derivatized continuous beds were formed adding the macrocyclic compounds to the solution of neutral acrylic monomers and crosslinker prior to the initiation of the polymerisation. Cationic and anionic derivatives of beta-cyclodextrin were used as macrocyclic compounds. Investigation of the electroosmotic properties indicated a template directed and enthalpy controlled self-assembly of the polyrotaxanes during the polymerisation of the continuous beds. This process was monomer-composition dependent and favored by the hydrophobicity of the polymeric skeleton. The morphology of the continuous beds was evaluated using high-resolution optical microscopy with CCD camera and atomic force microscopy. Reversed-phase capillary chromatography driven by electroosmosis, originating from the polyrotaxane structure, was performed using several test mixtures. Not primarily designed for the chiral chromatography the polyrotaxane derivatized continuous beds demonstrated enantioselective separation of D,L-metoprolol. The stability of the polyrotaxane derivatized continuous beds was tested. The beds demonstrated reproducible electroosmotic properties in the range from pH 4 to pH 9 (RSD=0.69%).     

Synthesis of Highly Insulated Molecular Wires by Polymerization of Organic-Soluble Symmetrical Linked Inclusion Complex Monomers

Summary: We developed a new method for synthesizing an organic-soluble permethylated cyclodextrin-based insulated molecular wire (IMW); this method involves the polymerization of a symmetrical linked inclusion complex as a monomer. This monomer was synthesized by dimerization of linked inclusion complexes at the terminal alkynyl groups by Glaser coupling. The polyrotaxane thus obtained is highly soluble in a variety of organic solvents and has a high covering ratio, regioregularity, and photoluminescence efficiency.     

Rheo-SANS studies on shear-thickening/thinning in aqueous rodlike micellar solutions

Shear-induced thickening/thinning phenomena of aqueous rodlike micellar solutions of cetyltrimethylammonium bromide (CTAB) and sodium p-toluene sulfonate (NapTS) were investigated by means of simultaneous measurements of rheology and small-angle neutron scattering (SANS), the so-called Rheo-SANS. The aqueous CTAB/NapTS solutions were classified into five different categories dependent on their flow behavior and micellar structure. By increasing salt concentration and/or shear rates, the micelles underwent morphological transition from (i) spherical or short rodlike micelles to (ii) long rodlike micelles without entanglements, followed by (iii) those with entanglements. These transitions were recognized as changes in flow behavior from Newtonian to shear-thickening and shear-thinning flow, respectively. In the latter two cases, anisotropic SANS patterns appeared around these critical shear rates. The physical meaning of the anisotropic SANS patterns accompanied by shear-thickening flow behavior is discussed in conjunction with other shear-thickening systems.     

Structure and interactions of block copolymer micelles of Brij 700 studied by combining small-angle X-ray and neutron scattering

Spherical micelles of the diblock copolymer/surfactant Brij 700 (C(18)EO(100)) in water (D(2)O) solution have been investigated by small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). SAXS and SANS experiments are combined to obtain complementary information from the two different contrast conditions of the two techniques. Solutions in a concentration range from 0.25 to 10 wt % and at temperatures from 10 to 80 degrees C have been investigated. The data have been analyzed on absolute scale using a model based on Monte Carlo simulations, where the micelles have a spherical homogeneous core with a graded interface surrounded by a corona of self-avoiding, semiflexible interacting chains. SANS and SAXS data were fitted simultaneously, which allows one to obtain extensive quantitative information on the structure and profile of the core and corona, the chain interactions, and the concentration effects. The model describes the scattering data very well, when part of the EO chains are taken as a "background"contribution belonging to the solvent. The effect of this becomes non-negligible at polymer concentrations as low as 2 wt %, where overlap of the micellar coronas sets in. The results from the analysis on the micellar structure, interchain interactions, and structure factor effects are all consistent with a decrease in solvent quality of water for the PEO block as the theta temperature of PEO is approached.     

Small-angle neutron scattering study of concentrated colloidal dispersions: the interparticle interactions between sterically stabilized particles

Small-angle neutron scattering (SANS) was used to investigate the interparticle interactions in concentrated dispersions of colloidal silica stabilized either by steric or by electrostatic repulsive interactions. In 10 mM NaCl, an adsorbed PEO layer is required to prevent flocculation, and particles are stabilized by steric repulsions. The adsorbed layer was made invisible to neutrons by contrast matching with the aqueous continuous phase. Dispersions of the same particles at the same concentrations but in the absence of added salt and adsorbed PEO were also studied. In both cases, the SANS spectra of concentrated dispersions show a peak at low Q, which is due to interparticle interactions: a structure factor. The SANS data can be described rather well by a homogeneous spherical form factor and a structure factor based on the Hayter-Penfold/Yukawa potential model. The steric potential was compared to the electrostatic potential obtained by fitting the SANS data of the bare silica dispersions. The steric potential shows a greater dependence on the particle volume fraction, which we ascribe to the penetration and compression of the adsorbed PEO layer as the particles approach.     

Mobility Tuning of Polyrotaxane Surfaces to Stimulate Myocyte Differentiation

Polyrotaxanes, consisting of poly(ethylene glycol) and α‐cyclodextrins, are mechanically interlocked supermolecules. The structure allows α‐cyclodextrins to move along the polymer, referred to as molecular mobility. Here, polyrotaxane‐based triblock copolymers, composed of polyrotaxanes with different degrees of methylation and poly(benzyl methacrylate) at both terminals, are coated on culture surfaces to fabricate dynamic biointerfaces for myocyte differentiation. The molecular mobility increases with the degree of methylation and the contact angle hysteresis of water droplets and air bubbles. When the mouse myoblast cell line C2C12 is cultured on methylated polyrotaxane surfaces, the expression levels of myogenesis‐related genes, myogenin (Myog) and myosin heavy chain (Myhc) are altered by the degree of methylation. Polyrotaxane surfaces with intermediate degrees of methylation promote the highest expression levels among all the surfaces. The polyrotaxane surface provides an appropriate environment for myocyte differentiation by accurately adjusting the degrees of methylation.     

A novel strategy to assemble achiral ligands to chiral helical polyrotaxane structures

Using the achiral N,N'-bis(2-pyridylmethyl)-1,6-hexanediamine ligand bearing two end pyridyl groups as the source of conformational chirality, a novel type of TMeQ[6]-based helical polyrotaxane was prepared and characterized by X-ray crystallography and (1)H NMR spectroscopy. The chirality of the polyrotaxane was generated from twisting of the hexylidene of the N,N'-bis(2-pyridylmethyl)-1,6-hexanediamine "string" when bound within the hydrophobic cavity of TMeQ[6]. Two opposite chiral helical polyrotaxanes crystallize as a racemic compound.     

Synthesis of polyrotaxanes based on α-cyclodextrin and poly(ethylene oxide)

Inclusion complexes of poly(ethylene oxide) with α-cyclodextrin are the key compounds in the synthesis of polyrotaxanes. These complexes prepared in aqueous solutions contain free cyclodextrin, which cocrystallizes with the major reaction product. These complexes dissociate upon dissolution in DMF and DMSO to form cyclodextrin and pseudopolyrotaxanes with a low cyclodextrin content. Polyrotaxane was synthesized with the use of poly(ethylene oxide)-α,ω-bis-amine as a linear component. The end-groups of the polymer in the inclusion complex were modified by the reaction with 2,4-dinitrofluorobenzene. A procedure was developed for purification of a polyrotaxane with high cyclodextrin content. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1914–1918, August, 2005.     

Length-controlled rodlike self-assemblies in binary mixed langmuir-blodgett monolayers on mica

In this paper, atomic force microscopy (AFM) has been used to investigate the morphology of monolayers of the amphiphilic rod-coil diblock molecule (EO7OPV) containing oligo(phenylene vinylene) dimer (OPV) and poly(ethylene oxide) (PEO) as well as the morphology of mixed monolayers of EO7OPV and palmitic acid (PA) deposited onto mica by the Langmuir-Blodgett technique. At surface pressures higher than 3 mN/m, EO7OPV forms regular-shaped aggregates with a monomolecular layer structure, where the hydrophilic PEO blocks are adsorbed onto the mica substrate and the hydrophobic OPV blocks form an ordered crystalline OPV layer on the top of the PEO layer through the strong pi-pi stacking interaction. In the mixed LB monolayers of EO7OPV and PA, the phase separation occurs. At a certain mixed ratio, EO7OPV molecules form rodlike domains with regular shape and uniform size at surface pressures higher than 3 mN/m. With the increase of the molar fraction of PA, the rodlike domains consisting of EO7OPV are elongated. The length of the rodlike domains can be tuned easily in a large range by altering the molar ratio of EO7OPV and PA. In addition, the rodlike domains are oriented to specific directions, corresponding to the directions of the potassium ion array on the mica surface having 6-fold symmetry. We demonstrate the possible formation mechanism and the elongation origin of rodlike domains in mixed LB monolayers and propose the two-step formation process of oriented rodlike domains deposited onto the mica substrate.     

Polyrotaxane metal-organic frameworks (PMOFs)

Polyrotaxane metal-organic frameworks (PMOFs), a relatively rare branch of entangled networks, have received significant attention due to their unusual entanglement topologies. The PMOFs we described here are still at an early stage of development. This feature article summarizes the recent developments in structural types of PMOFs from our own group and others. We make some generalizations about the various classes of PMOFs, and develop the definitions and nomenclature of these entanglements, including classification into trivial and nontrivial polyrotaxanes, and limits on what constitutes a (nontrivial) polyrotaxane. Finally, the synthetic strategies toward the design and preparation of new PMOFs are elucidated.