PP／LDPE共混体系的辐射效

研究了在多官能团单体－三烯丙基异氰脲酸酯存在下ＰＰ／ＬＤＰＥ共混体系接受γ－辐射的效果。用溶解度参数和ＴＥＭ技术评估了共 体系的相容性与多官能团单体在共混体系中的分布，并用ＳＥＭ、ＤＣＳ、动态力学等方法对共混体系相容性进行了表征。     

PES／PC共混体系的相容性与力学性能

ＰＥＳ／ＰＣ共混体系的相容性与力学性能姜振华，马荣堂，寇喜春，安立佳（吉林大学化学系长春）（中国科学院长春应用化学研究所长春１３００２２）关键词聚醚砜，聚碳酸酯，共混物，力学性能聚醚砜（ＰＥＳ）是一种性能优异的特种工程塑料，它具有强度高、刚性大、耐热...     

PP/EPDM共混体系的辐射效应

聚丙烯和三元乙丙橡胶(EPDM)的γ辐射效应及辐射后的聚丙烯熔体流动速率的测定表明,在限定空气中聚丙烯随着辐照剂量的增加,熔体流动速率急剧下降,而三元乙丙橡胶随辐射剂量的增加,凝胶含量逐渐增加。在20kGy的剂量辐照下,凝胶含量为22．7％,加入2％的三聚异氰酸三烯丙酯,在相同的剂量辐照下,凝胶含量达到68％。在低剂量下辐照对共混物的拉伸强度影响不大,对冲击强度有很大的影响。在20kGy的剂量辐照下,加入50％EPDM的聚丙烯的缺口冲击强度由1．95kJ／m^2提高到30kJ／m^2,维卡软化温度由85．9℃提高到97．0℃。     

SEP对PP/PS共混物的增容作用

研究了苯乙烯 -乙烯 /丙烯二嵌段共聚物 (SEP)对聚丙烯 /聚苯乙烯 (PP/PS)共混物的形态和力学性能的影响。结果表明 ,SEP在PP/PS共混物中作为增容剂 ,降低了分散相的聚结 ,减小了分散相的平均粒子尺寸 ,大大改变了共混物的形态 ,提高了共混物的力学性能 ,对PP/PS( 2 0 /80 )共混物的增容作用较为显著     

多单体接枝聚丙烯对PBT/PP共混体系的形态结构及力学性能影响研究

研究了甲基丙烯酸缩水甘油酯 (GMA)和苯乙烯 (St)多单体熔融接枝聚丙烯 (PP g (GMA co St) )对聚对苯二甲酸丁二酯 (PBT) 聚丙烯 (PP)共混物的形态结构和力学性能的影响 .利用双螺杆挤出机对PBT PP合金进行共混挤出 ,使用DSC、FT IR和SEM、TEM等手段对共混物进行了分析和相形态观察 ,并测试了力学性能 .实验证明 ,熔融共混过程中PP g (GMA co St)的环氧基团可以与PBT的端羧基发生化学反应 ,就地生成了PBT g PP共聚物 ,该共聚物可对PBT PP合金起到良好的增容剂作用 ,使共混物的相区尺寸显著减小 ,共混物的拉伸强度和冲击强度等力学性能同时得到明显改善 ,达到了弹性体系或小分子增容所难以达到的力学性能平衡的效果 .此外 ,TEM的研究还在PBT PP g (GMA co St)共混物中发现了特殊的微相分离结构     

聚醚砜／聚酚氧共混体系相容性与力学性能

聚醚砜／聚酚氧共混体系相容性与力学性能姜振华，马荣堂，寇喜春，安立佳（吉林大学化学系长春）（中国科学院长春应用化学研究所长春１３００２２）关键词聚醚砜，聚酚氧，共混物，相容性，力学性能，熔体粘度聚醚砜（ＰＥＳ）是一种耐热特种工程塑料，但韧性差、熔体粘...     

离散物Surlyn对PBT／PP共混体系的力学性能及形态结构的影响

用力学性能测试，ＤＭＡ、ＳＥＭ等方法研究了离聚物Ｓｕｒｌｙｎ对ＰＢＴ／ＰＰ共混体系的力学性能及形态结构的影响。结果表明，在ＰＢＴ／ＰＰ共混体系中引入少量Ｓｕｒｌｙｎ可以改善界面的粘接性，从而改善其力学性能。     

PP/LDPE共混体系的辐射效应

研究了在多官能团单体—三烯丙基异氰脲酸酯存在下ＰＰ／ＬＤＰＥ共混体系接受γ－辐射的效果。用溶解度参数和ＴＥＭ技术评估了共混体系的相容性与多官能团单体在共混体系中的分布，并用ＳＥＭ、ＤＳＣ、动态力学等方法对共混体系相容性进行了表征。结果表明，ＰＰ／ＬＤＰＥ是不相容的共混体系，三烯丙基异氰脲酸酯主要分布在共混体系的相界面区域，辐照强化了共混体系的相间结合，增加了界面厚度，改善了共混体系的相容性。     

环氧树脂／聚氧乙烯固化共混体系的动态力学性能

研究了环氧树脂／聚氧乙烯分别在邻苯二甲酸酐和４，４’－二氨基二苯甲烷为固化剂条件下的固化剂用量，类型和固化共混物的动态力学性能。结果表明所有共混物在熔副态和非晶态都是相容的，即在高温区都存在一个α松驰，玻璃化转变温度随共混组成有规律地变化，不同固化剂的固化物交网的化学结构不同，因而低温松弛－β松弛机制也不同，同时其对体系的交联密度，共混组成的依赖性也不同。     

Dynamic Mechanical Behavior and Prediction for PP/POE Blends

Polypropylene(PP)/ethylene-octene copolymer(POE) blends were prepared with a twin-screw extruder.Their dynamic mechanical behavior were systematically investigated.The results show that PP/POE blends are heterogeneities with a partial compatible two-phase structure,the glass transition temperature of PP phases in the blends tends to shift towards high temperature with increasing the POE content,and the glass transition temperature of POE phases shifts towards the low temperature with increasing the PP conte...     

PP/POE共混物的P-V-T属性及压力对结晶温度的影响

采用PVT膨胀仪研究了PP/POE共混物的P-V-T属性, 利用Tait方程预测其比容和热膨胀系数(α), 研究了压力对结晶温度(Tc)的影响. 结果表明, Tait状态方程可用来预测部分相容的、半结晶PP/POE共混物的PVT行为. PP结晶前后的比容变化比POE的大得多, 随着POE含量的增加, PP/POE共混物结晶前后比容的变化均逐渐减小. PP在熔融状态下的α比固体状态的大, 而POE正好相反. PP/POE共混物的α随温度和压力的变化与其组成密切相关. 随着压力的增高, PP, POE及其PP/POE共混物的结晶温度均呈线性增高的趋势.     

The mechanical properties of radiation-vulcanized NR/BR blending system

The effect of radiation dose on the mechanical properties of NR/BR blending system is reported in this paper. A comparison was made between sulphur vulcanization and radiation vulcanization for an optimal nature rubber (NR)/ butyl rubber (BR) blending ratio (60/40) at dose range from 10 to 150 kGy. The result shows that the mechanical properties, especially, tensile strength, elongation at break, and tear strength have been improved significantly by radiation–vulcanization. This finding was also proved by thermal aging experiment on a selected NR/BR blend at 70°C for up to 168 h.     

Enhanced radiation crosslinking of carboxymethylated chitosan in the presence of acids or polyfunctional monomers

Carboxymethylated chitosan (CMCt) hydrogels were synthesized by γ-ray radiation-induced crosslinking in the presence of acids or polyfunctional monomers. Compared with that of CMCt hydrogels synthesized without additives, the gel fraction was improved and the gelation dose was decreased obviously after incorporating acids or polyfunctional monomers into CMCt hydrogels. The diffusion behavior of water in the CMCt gels prepared at different conditions was Fickian diffusion, and the swelling of the CMCt gels displayed characteristic pH sensitivity, which was analyzed by fluorescence molecular probes. Preliminary mechanism of radiation-induced crosslinking of CMCt in the presence of acids or polyfunctional monomers was discussed based on the FTIR and sol-gel analysis. Furthermore, it was found that CMCt hydrogels were hydrodegradable with high temperature (>60 °C), and incorporating polyfunctional monomers into the CMCt hydrogels also could improve the thermal stability of the CMCt hydrogels obviously.     

甲壳素/聚氨酯共混物膜结构与性能的研究

采用共混的方法分别制备了丁羟型和聚醚型聚氨酯／甲壳素共混膜(HPCT和PPCT系列),研究了甲壳素加入量对共混膜力学性能、热稳定性、溶胀性和吸湿性的影响,讨论了共混物膜在不同环境条件下的降解性能。结果表明随着甲壳素含量的增加共混材料对水的亲和力和热稳定性提高,当甲壳素质量分数分别为0．15和0．10时HPCT系列和PPCT系列具有较佳的力学性能,HPCT和PPCT系列分别在pH=7．0和pH=4．7的环境中具有良好的降解性能。     

PP/尼龙66/聚碳酸酯/ABS共混高聚物的SEM样品制作

讨论了PP／尼龙66／聚碳酸酯／ABS共混高聚物的扫描电子显微镜样品制作中存在的问题,通过实验,探讨了出该材料最佳的样品制作条件。     

EAA增容LLDPE／SAN共混物的形态及力学性能

采用SEM及力学性能测试等方法，研究了乙烯－丙烯酸共聚物（EAA）含量对其增容线性低密度聚乙烯（LLDPE）／苯乙烯－丙烯腈共聚物（SAN）共混物形态及性能的影响．发现少量的EAA可使共混物中SAN相的相尺寸减小，共混物模量、拉伸强度及断裂伸长率提高．当EAA的含量增加至11．7％时，它在共混物中两相界而的分布达到饱和，即增容剂饱和浓度Cs=11．7％；此时，共混物形态及性能的变化趋势出现明显转折．明显过量的EAA主要起增韧作用．EAA的增容机理为，它与LLDPE组分的非晶区可部分相容，同时又与SAN相存在着分子间特殊作用.     

Determination of bound rubber composition of filled SBR/BR blend compounds by analysis of the unbound rubber composition and bound rubber content

Analytical method for determination of the bound rubber composition of a filled SBR/BR blend compound was developed using measurement of the bound rubber content and microstructural analysis of the unbound rubber composition. Various filled SBR/BR blend compounds with different blend ratios were prepared using SBRs with different microstructures. This method included measurement of the bound rubber content, extraction of the unbound rubber, microstructural analysis of the unbound rubber composition, and process for determination of the bound rubber composition. Composition of the unbound rubber was analyzed using liquid proton nuclear magnetic resonance spectroscopy (H-NMR) and transmission Fourier transform infrared spectroscopy (FTIR). It was found that the analytical results using H-NMR had less experimental errors than those using transmission-FTIR. The raw SBR/BR blends were also analyzed in order to evaluate level of the experimental errors. Average SBR/BR ratios of the unbound rubbers were obtained using the 1,2- and 1,4-unit contents determined by the H-NMR analysis. The bound rubber compositions were obtained using the bound rubber contents and the average unbound rubber compositions. It was found that most of the bound rubbers had higher SBR ratios than the formulation value.     

注压成型纳米结构PP/POE共混物表面的液滴低温冲击行为

以制备的阳极氧化不锈钢模板为模具嵌件, 采用注射压缩成型(ICM)工艺快速成型表面具有纳米丝结构的柔性聚丙烯/乙烯-辛烯共聚物(PP/POE, PP与POE质量比为3∶1)共混物复制物和准刚性PP复制物, 研究常温液滴冲击?10 ℃复制物表面的动态行为. 结果表明, 致密的纳米丝使复制物表面呈现超疏水、 极低黏附的润湿状态. 在低冲击速度范围内, 共混物复制物表面上液滴的接触时间比PP复制物上的短, 可归因于液滴铺展阶段柔性纳米丝储存的弹性势能在回缩阶段转换为液滴的动能; 在高冲击速度范围内, 共混物复制物基板和纳米丝储存的弹性势能被转换为液滴的动能, 进一步缩短了液滴的接触时间. 此结果表明, 共混物复制物的柔性和表面超疏水性使其具有优异的防冻黏性能. 共混物复制物表面上水滴(50 μL)的结冰时间得到明显延长、 冰黏附强度明显降低. 研究结果表明, 可采用ICM快速成型具有优异防冻黏和防冰性能的柔性超疏水高分子材料表面.