Homogeneity and stability studies during the preparation of a laboratory reference material of soy leaves for the determination of metals

The homogeneity and stability of metals were tested in a candidate laboratory reference material of soy leaves. Inductively coupled plasma-optical emission spectrometry was used to quantify calcium, magnesium, manganese, iron, zinc, copper, and vanadium. A 6 kg amount of the material, which was dried, ground, and classified as mesh 60, was distributed among 100 bottles. The between-bottle homogeneity test was established by analyzing two subsamples from nine bottles. For the within-bottle test, five determinations of each element of a single bottle were performed. The stability test was performed at temperatures of -10, +27, and +40 degrees C, and after storage times of 4, 12, 24, and 52 weeks. The obtained results indicated that the material was homogeneous and stable under the conditions studied.     

Use of multivariate statistical analysis to evaluate experimental results for certification of two pharmaceutical reference materials

This paper demonstrates the use of the multivariate analysis for the quick and easy evaluation of the experimental results from the homogeneity test of two new certified reference materials (CRM) of active pharmaceutical ingredients (API): metronidazole and captopril. The principal component analysis (PCA) and the hierarchical cluster analysis (HCA) indicated that some results from the homogeneity test were statistically different when the concentrations of all API impurities were considered simultaneously. Through the use of these statistical tools, it was possible to reduce the standard uncertainty due to between-bottle (in)homogeneity (u _bb) and consequently the combined standard uncertainty of the certified reference materials (u _CRM) with 95% confidence level.     

Preparation and homogeneity study of a mussel candidate reference material for certification of organotin compounds

Organotin compounds are currently determined in various environmental matrices (in particular water, sediment and shellfish) to form the basis of control measures for the levels of contamination, as required in some EC Directives. Accurate measurements are a prerequisite for the enforcement of this legislation, which implies that good quality control of determinations should be ensured. One of the tools for achieving accuracy is to use certified reference materials (CRMs). With regard to tin species, however, CRMs are rather scarce and mainly concern sediment and fish matrices certified for their butyltin content. The present study deals with the preparation of a mussel candidate reference material and the verification of its homogeneity prior to the certification of the contents of butyl- and phenyl-tin compounds. 100kg of mussels (Mytilus edulis) were collected, carefully washed with fresh water in order to eliminate matrix salts and immediately frozen by immersion in liquid nitrogen. The mussels were shelled (in the frozen state) and the edible part was stored in thermally sealed polyethylene bags which were stored at –25 °C. The frozen material was ground in a Teflon-coated grinding mill, spread on sterilized flat trays and freeze-dried. The freeze-dried material was then ground for 15 days in a zirconia ball mill and sieved on a titanium sieve to separate the fibrous part. Successively, the material was mixed for 15 days under argon atmosphere in a special polyethylene-lined mixing drum and bottled in brown Pyrex-glass bottles. 21 bottles were selected during the course of the bottling procedure to verify the within- and between-bottle homogeneity of the overall batch. The within-bottle homogeneity was verified by determining the organotin (butyl- and phenyltins) content for subsamples of 500 mg in ten replicates from one bottle, whereas the between-bottle homogeneity was controlled by one organotin measurement from each of 20 bottles. The analyses were performed by GC-MS. The results showed that the homogeneity of the material makes it suitable as a candidate reference material.     

Applying INAA to the homogeneity study of a <Emphasis Type="Italic">Perna perna</Emphasis> mussel reference material

Instrumental neutron activation analysis (INAA) was used in the homogeneity study of a Perna perna (Linnaeus 1758) mussel reference material. Simultaneous determination of 15 elements in six bottles of the material, from a total of 171, was performed. The bottles were considered homogeneous for the analyzed elements, at the 95% confidence level, according to the analysis of variance test performed. Elements were also determined in one bottle with five different sample masses for minimum sample intake estimation. Results varied from 50 to 350 mg, depending on the element.     

Development of a certified reference material for the determination of acrylamide in potato chips

A certified reference material (CRM), KRISS CRM 108-10-003, has been developed for analysis of acrylamide in potato chips, as a representative of carbohydrate-rich food cooked in high-temperature oil. The material was prepared by grinding commercially available potato chips to a paste which was then homogenized, bottled in 15-g units, and stored at ?70 °C. Certification, homogeneity and stability testing, were carried out by liquid chromatography–isotope-dilution mass spectrometry (ID-LC–MS). A single ID-LC–MS measurement was performed for each of 10 selected units for certification and homogeneity assessment. The mean measurement result for the 10 bottles, 0.455?±?0.012 mg?kg^?1, was assigned as the certified value of the CRM. The between-bottle homogeneity was 0.8% of the certified value. The within-bottle homogeneity, tested by measuring three replicate sub-samples from each of three randomly selected bottles, was similar to the between-bottle homogeneity. The stability of the CRM under storage conditions (?70 °C) was tested for 21 months and no change in the acrylamide content was observed within the measurement uncertainty. Stability of the CRM at –20 °C (storage at user’s site) and room temperature (for regular use and transportation) was also tested. Also presented is the newly designed procedure for evaluating the uncertainty of the certified value for the characterization scheme used in this study.

Certification of the cadmium content in certified reference materials for Cd rice flour

The materials used to prepare the certified reference materials (CRMs) for Cd rice flour described here were taken from Cd-contaminated rice samples, round-grained and non-sticky rice grown in different provinces throughout China. The Cd rice materials were first blown to remove dust and husk, and then were successively ground, sieved, dried and mixed to form homogeneous rice flour. The Cd rice flour was packed in glass bottles, each bottle containing 40 g. All bottled CRMs were subjected to 60Co radiation (2.5 megarads) for long-term preservation. Atomic absorption spectrometry was used to determine the homogeneity of the cadmium content in each material. The certification of the cadmium content for the three CRMs was performed using isotope dilution mass spectrometry.     

ANOVA–principal component analysis and ANOVA–simultaneous component analysis: a comparison

ANOVA–simultaneous component analysis (ASCA) is a recently developed tool to analyze multivariate data. In this paper, we enhance the explorative capability of ASCA by introducing a projection of the observations on the principal component subspace to visualize the variation among the measurements. We compare the significance of experimental effects for ASCA and ANOVA–principal component analysis (PCA), a similar tool to explore multivariate data, by using permutation tests. Furthermore, we quantify the quality of the loadings estimate obtained with ASCA and compare this with the loadings estimate obtained with ANOVA–PCA. Copyright © 2011 John Wiley & Sons, Ltd.     

A mussel tissue certified reference material for multiple phycotoxins. Part 3: homogeneity and stability

A candidate certified reference material (CRM) for multiple shellfish toxins (domoic acid, okadaic acid and dinophysistoxins, pectenotoxins, yessotoxin, azaspiracids and spirolides) has been prepared as a freeze-dried powder from mussel tissues (Mytilus edulis). Along with the certified values, the most important characteristics for a reference material to be fit-for-purpose are homogeneity and stability. Acceptable between-bottle homogeneity was found for this CRM. Within-bottle homogeneity was assessed using domoic acid, and it was shown that repeated subsampling of the CRM can be performed precisely down to 0.35 g. Both short- and long-term stability studies carried out under isochronous conditions demonstrated excellent stability of the various toxins present in the material. While degradation of some analytes was observed at +60°C in short-term studies, it was determined that shipping at ambient temperature is adequate. No instability was detected in long-term stability studies, and it was shown that the material can be held at +18°C safely for up to 1 year. To guarantee stability of the CRM over its lifetime the stock will be maintained at −20°C. The results of the homogeneity and stability testing show that CRM–FDMT1 is appropriate for its intended use in quality assurance and quality control of shellfish toxin analysis methods.     

基于主成分分析-Fisher判别分析的食品类塑料瓶物证差分拉曼光谱分类

食品类塑料瓶物证携带许多潜在证据信息,目前针对此类物证的检验研究尚处于探索阶段。利用差分拉曼光谱对46个食品类塑料瓶样品进行检验,依据样品材质及光谱特征峰可将样品分为三类。利用主成分分析（Principal component analysis, PCA）-Fisher判别分析,绘制主成分得分图,构建判别函数,建立分类模型。结果表明,食品类塑料瓶样品具有明显的聚类关系,原始分类与交叉验证分类准确率达到100 %。差分拉曼光谱结合PCA-Fisher判别分析,检验鉴别食品类塑料瓶物证具有一定的科学性。     

New reference material for analysis of elements in glutinous rice produced at the National Institute of Metrology (Thailand)

Reference materials play an important role for evaluating the accuracy of analytical results, and are essential parts of good laboratory practice. They represent a key tool for quality control of chemical analyses. In Thailand, the demand of food and environmental reference materials is constantly increasing, and the National Institute of Metrology (NIMT, Thailand) is responding to the urgent needs for affordable materials, which require collaborative efforts at the national level. This paper describes the preparation of a new glutinous rice reference material, along with homogeneity and stability studies and the analytical work carried out for the certification of the contents of inorganic elements. The incurred material was collected from an actual rice paddy field. Material preparation along with homogeneity and stability testing were carried out at the Environmental Research Training Centre (ERTC). The homogeneity study was designed to have three experimental conditions; (A) 10 bottles of candidate materials being analyzed each with 2 replicates, (B) 20 bottles with 2 replicates, (C) 10 bottles with 7 replicates, in order to study the suitable treatments for homogeneity testing in the reference material production. It was shown that a minimum number of 10 bottles with duplicate analyses are enough to demonstrate the homogeneity of candidate reference material. Certification of a candidate reference material in a single laboratory using reference method was confirmed with an interlaboratory comparison participated by a certain number of well recognized testing laboratories in Thailand. Further elaborative results will be discussed.     

High Precision Titrimetry,Ion Chromatography and ICP-Optical Emission Spectrometry for the Estimation of Inhomogeneities in Aqueous Calibration Solutions for Metrological Purposes

The homogeneity of samples intended for metrological intercomparison studies must be granted without ambiguity. This holds equally true for aqueous solutions for which the determination of between-bottle variations requires measurement techniques with extremely high precision. Therefore measurement series were designed for automated analysis techniques such as titrimetry, optical emission spectrometry and ion chromatography which offer very high precision of results. Between-bottle relative standard deviations (RSD) of at best 0.008% were obtained with titrimetry. With optical emission spectrometry and ion chromatography, between-bottle RSDs of 0.02% and 0.05% were obtained. The contributions from these measurements were included in a conservative approach to the uncertainty budgets of the gravimetrical reference values for the analytes in the samples.     

Preparation and analysis of a marble reference material

A 7 kg stone of a Carrara marble was reduced to grains smaller than 100 m, mixed and homogeneized in order to prepare a marble reference material. The homogeneity was tested for 16 elements by instrumental neutron activation analysis (INAA). Through a one-way analysis of variance based on several analyses of each of 15 bottles and within the same bottle, it was concluded that the inter-bottle heterogeneity is not greater than the intra-bottle heterogeneity. Results on the concentration of major and trace elements in the marble reference material, obtained by different laboratories and different techniques, are given. The limestone certified reference material KALKSTEIN KH was used to evaluate measurement accuracy, to intercalibrate laboratories, and to provide compatibility of measurement data.     

Development of bovine serum albumin certified reference material

We present the development process for National Institute of Metrology (NIM) bovine serum albumin (BSA) certified reference material (CRM). Each CRM unit contains about 200 mg of purified BSA. The moisture, ignition residue, molecular weight, and high-performance liquid chromatography (HPLC) purity were analyzed and mass spectrometry based protein identification was carried out to ensure the material was BSA. Both amino acid based isotope dilution mass spectrometry (IDMS) and a purity deduction method were selected for value assignment. The certified value was the average of the IDMS and the purity deduction result. HPLC purity analysis was used to examine the homogeneity and stability of solid BSA CRM. Fifteen units were selected for between-bottle homogeneity examination and seven subsamples from the same bottle were selected for within-bottle homogeneity examination. Statistics showed the CRM passed both the between-bottle and the within-bottle homogeneity examination. The CRM stability under storage conditions (-20 °C) was tested for 18 months and no trend was observed. Uncertainties from the balance, amino acid purity, hydrolysis, method reproducibility, homogeneity, and stability were taken into account in uncertainty evaluation. The final certified value of NIM BSA CRM is (0.963±0.038) g/g.     

Uncertainty calculations in the certification of reference materials. 1. Principles of analysis of variance

 The preparation and certification of reference materials is a rapidly developing area. Many innovative reference materials have limited homogeneity and stability, and, additionally, the uncertainty estimation of the property values must be brought in agreement with the principles of the “Guide to the expression of uncertainty in measurement” (GUM). The results of the homogeneity and stability studies must be included to a certain extent in the uncertainty of the property values of the reference material, in order to comply with these requirements. The basic theory needed to accomplish this is essentially the theory of analysis of variance (ANOVA). As GUM also allows alternative evaluations other than Type A evaluations, a reinterpretation of the theory of ANOVA is necessary to establish a model for the certification of reference materials that is widely applicable. For this, analysis of variance can be used as a statistical technique to derive standard uncertainties from homogeneity, stability and characterisation data. Received: 10 May 2000 / Accepted: 29 July 2000     

Preparation and homogeneity characterization of ten agricultural/food reference materials for elemental composition

Summary Ten agricultural/food reference materials (RM): bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, whole milk powder, wheat gluten, corn bran, Durum wheat flour, whole egg powder and microcystalline cellulose, were prepared by milling, irradiation, sieving, blending and packaging procedures. Homogeneity tests for 14 elements in randomly selected units were performed by the initiating laboratories by application of various analytical methods. Al, Ca, Cu, Fe, K, Mg, Mn, Na, Sr and Zn were determined by acid digestion flame atomic absorption spectrometry, and Cd, Co, Ni and Pb using acid digestion graphite furnace atomic absorption spectrometry after separation/preconcentration of the analytes by co-precipitation. In addition, the extensive set of analytical results obtained from the interlaboratory cooperative characterization campaign was assessed to provide homogeneity estimates for other elements. Measures of homogeneity were estimated from the within-laboratory precision from the more precise laboratories. All materials exhibited acceptable homogeneity for virtually all 29 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Se, Sr, V, Zn) for which best estimate concentration values were available, an essential pre-requisite in establishing reference values for these materials. Sixty-two percent of all homogeneity coefficients of variation (CV) were below 5%, with Br, Ca, Cl, Mg, Na, P, Zn and especially K and N exhibiting very high homogeneity CV less than 1% in some cases.Contribution no. 92–148 from Centre for Land and Biological Resources Research     

Quality assessment of organic coffee beans for the preparation of a candidate reference material

Summary A random sampling was carried out in the coffee beans collected for the preparation of the organic green coffee reference material in view of assessing the homogeneity and the presence of soil as impurity. Fifteen samples were taken for the between-sample homogeneity evaluation. One of the samples was selected and 10 test portions withdrawn for the within-sample homogeneity evaluation. Br, Ca, Co, Cs, Fe, K, Na, Rb, Sc and Zn were determined by instrumental neutron activation analysis (INAA). The F-test demonstrated that the material is homogeneous for Ca, Co, Cs, K and Sc, but not homogeneous for Br, Fe, Na, Rb and Zn. Results of terrigenous elements suggested negligible soil contamination in the raw material.     

Summary of preparation and homogeneity characterization of ten agricultural food reference materials for elemental composition

Summary Preparation and development has been completed of ten agricultural/food reference materials (RMs): bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, whole milk powder, wheat gluten, corn bran, durum wheat flour, whole egg powder and microcrystalline cellulose. Homogeneity tests for 14 elements, Al, Ca, Cd, Co, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were performed by the initiating laboratories by application of precise and reliable analytical methods based on flame atomic absorption spectrometry and graphite furnace atomic absorption spectrometry. An extensive set of analytical results obtained from the interlaboratory cooperative characterization campaign was assessed to provide homogeneity estimates for other elements. Estimates of homogeneity from within-laboratory precision indicated that all materials exhibited acceptable homogeneity for virtually all 29 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Se, Sr, V, Zn) for which best estimate concentration values are available. Two thirds of all homogeneity coefficients of variation were below 5%.     

4,9-脱水河豚毒素国家标准样品的研制

研制4,9-脱水河豚毒素国家标准样品。以河豚鱼卵巢为原料,提取制备4,9-脱水河豚毒素,采用红外光谱(IR)、高分辨质谱和核磁共振谱(NMR)进行结构确证。样品分装成140瓶后,采用柱后衍生–高效液相荧光法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明在95%的置信区间范围内样品均匀性良好;稳定性考察按照40℃加速试验稳定性(6个月)进行,结果表明在考察期间内样品稳定性良好;标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,4,9-脱水河豚毒素标准样品定值结果为97.77%,相对扩展不确定度为0.4%(k=1.96)。该标准样品达到国家标准样品的技术要求,可用于有关脱水河豚毒素的方法校正和质量控制。     

Determination of the Polar Compounds in Vegetable Oil by Ultra-Performance Liquid Chromatography–Quadrupole-Time-of-Flight-Mass Spectrometry with Chemometrics

High-throughput ultra-performance liquid chromatography–quadrupole time-of-flight mass spectrometry was combined with chemometric tools for the rapid determination of polar components in camellia oil, rapeseed oil, and waste cooking oil. The results were analyzed by two unsupervised methods: principal component analysis (one-way ANOVA, p<.05) and volcano plot analysis (p<.05, fold change ≥2) and supervised method: partial least squares discriminant analysis. The results showed that the oils were correctly classified based on their polar components. The first three principal components reflected most detail with a cumulative contribution rate of 84.67% using principal component analysis. The prediction accuracy was close to 100% using partial least squares discriminant analysis. Nineteen components were screened by principal component analysis; twelve were preliminary identified as palmitamide, phytosphingosine, eicosasphinganine, 1-monopalmitin, glyceryl monooleate, glyceryl monostearate, 1α-hydroxyvitamin D2, 1-linoleoyl glycerol, oleamide, sphinganine, stearamide, and linoleic acid. The proposed method may be applied to effectively and accurately authenticate edible oils.     

Evaluation of uncertainty of reference materials

 Certification of reference materials is far more than just characterisation of a selected homogeneous batch of material. From the perspective of the ISO Guide on the Expression of Uncertainty in Measurement (GUM) all uncertainty sources relevant to the user of an individual certified reference material (CRM) sample at a moment in time should be part of the CRM uncertainty. This not only includes the full uncertainty of the batch characterisation (rather than the statistical variation), but also all uncertainties related to possible between-bottle variation, instability upon long-term storage and instability during transport to the customer. Received: 21 April 1999 · Accepted: 24 September 1999